Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CASE, MEDICAL INSTRUMEN

Active
SPE2DS-26-T-265ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies a watertight, dustproof, and chemical-resistant medical instrument and supply case constructed from high-density copolymer plastic, featuring wheels and carrying handles, in black color without an internal insert. The case measures 31.5 inches by 22.875 inches by 18.875 inches externally and is designed to float in water while supporting a 350-pound load. It is not regulated by the FDA and must be supplied with its source and part number clearly identified. The item is procured under the National Stock Number 6545015127231, with a unit of issue of each, and the contract requires two units to be delivered within 20 days FOB destination. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all packaging must meet commercial standards per ASTM D3951 unless superseded by DLA Master List of Technical and Quality Requirements. Palletization and packaging must adhere to DLA Packaging Requirements for Procurement. The delivery address is a vessel shipment to USS LEWIS B PULLER ESB 3 at FPO AE 09591, with transportation governed by specific DLAD procedural notes. The solicitation number is SPE2DS-26-T-265Z, with a response deadline of July 29, 2026, and an original required delivery date of July 27, 2026. The primary point of contact is Kendall Jones at DLA, and the procurement is classified under NAICS code 339112.

General Info

Two black, durable, floatable medical cases, 31.5x22.875x18.875 in, FOB destination, due July 27, 2026, for USS LEWIS B PULLER ESB 3.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

UNIT 100195 BOX 1, FPO, AE, 09591, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-265Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Kendall Jones
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CASE,MEDICAL INSTRUMENT AND SUPPLY SET
CASE, MEDICAL INSTRUMENT AND SUPPLY SET,
WATERTIGHT, DUSTPROOF, CHEMICAL RESISTANT,
HIGH DENSITY COPOLYMER PLASTIC, WITH WHEELS
AND CARRYING HANDLES, BLACK, WITHOUT AN
INSERT, OUTSIDE DIMENSIONS 31.5 INCHES X
22.875 INCHES BY 18.875 INCHES, FLOAT IN
WATER WITH A 350 LB CAPACITY.
.
UNIT OF ISSUE EACH, EA.
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
THIS ITEM IS NOT REGULATED BY THE FDA.
.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DS-26-T-265Z
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
GENERAL DYNAMICS MISSION SYSTEMS, INC. 67032 P/N 10-2796108-1
PELICAN PRODUCTS, INC. 65442 P/N 1660
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017591731 0001 EA 2.000
NSN/MATERIAL:6545015127231
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V70027
USS LEWIS B PULLER ESB 3
UNIT 100195 BOX 1
FPO AE 09591
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V70027
SPE2DS-26-T-265Z
SECTION B
PR: 7017591731 PRLI: 0001 CONT’D
USS LEWIS B PULLER ESB 3
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) V700276184Y072
RDD: 777
PROJ: LP5 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A41 DIST: 9B ADV: 2A FC: S7
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE2DS-26-T-265Z NSN/Part Number: 6545-01-512-7231 Quantity: 2 EA Purchase Request: 7017591731QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
SPLINT, LEGThe contract is for a three-panel knee immobilizer splint, designed for post-operative immobilization of injured knees, with a universal left or right fit suitable for most patients. It features polyurethane foam and mesh side panels with trimmable design, contoured stays, and five hook-and-pile closures for secure fit, accommodating thigh circumferences up to 32 inches and a standard length of 24 inches. The product includes a closed patella design and is issued as a single unit. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-265B, has a response deadline of July 29, 2026, with performance delivery expected within 20 days after order. The contracting office is the Department of Defense, Medical Supply Chain, located at Fort Bliss, Texas, with James Burke as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
MASK, ORONASALThe contract specifies the procurement of a single adult oronasal resuscitator mask with a latex-free blue cuff, identified by NSN 6515-01-036-9070 and part numbers from approved manufacturers including AMBU INC, CARDINAL HEALTH, and MEDLINE INDUSTRIES. The unit of issue is each, with a quantity of one, and delivery is required within 20 days FOB destination to Fort Bliss, Texas. All packaging must comply with DLA Packaging Requirements, ASTM D3951, and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Markings on all containers must include the MFD prefix followed by the lot and manufacture date, along with NSN, manufacturer, CAGE code, contract number, and expiration or retest date. The product is FDA-regulated and requires pre-award referral via EBS for confirmation. Shipping must be traceable and cannot use parcel post, with all shipments directed to the specified Fort Bliss delivery point. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and the solicitation is issued under SPE2DS-26-T-268G with a response deadline of July 29, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, INTRAOSSEOUSThe contract specifies the procurement of intraosseous needles, specifically the EZ-IO Needle and Stabilizer Kit, identified by NSN 6515-01-648-7346, with a quantity of four units. Each unit includes a 15 gauge 25 mm needle, an EZ-stabilizer dressing, an EZ-connect IV extension set, a needleVISE-1 port, and a patient wristband. The items must have a shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and shipped in suitable exterior packaging that ensures safe delivery at the lowest cost to the designated point of delivery. All items must be labeled with the NSN, manufacturer and CAGE code, manufacturing and expiration dates, and contract or lot number. Marking must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-265X, requires delivery within 20 days after award and is subject to the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all technical and quality specifications referenced by R or I numbers. The contracting office is the Department of Defense’s Medical Supply Chain, with the place of performance listed as FPO, 96694, and points of contact provided for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DRAINAGE KIT, CLOSED SUThe contract is for the procurement of 3 pack units of a closed suction Jackson-Pratt drainage kit, each containing 10 disposable drainage units with a 100 mL reservoir and a radiopaque 97.5 cm long, 10 mm wide drain tube. The item is manufactured by Cardinal Health 200, LLC under part number SU130-1361 and is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and good manufacturing practices. The product has a non-extendable shelf life of 60 months and must be packaged and marked in strict accordance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Each unit must be sealed in a protective container and shipped in commercial exterior containers ensuring safe delivery at the lowest cost to the destination. Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment must be traceable, excluding parcel post, and delivered to Fort Bragg, North Carolina. The NSN is 6515-01-341-4523, and the purchase request number is 7017584396. The contract, issued under SPE2DS-26-T-262V, is part of a federal acquisition governed by DLA technical and quality requirements, with all packaging, marking, and logistical instructions aligned with DLA standards for medical acquisitions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CUTTER, LINDEMANNThe contract specifies the procurement of five disposable 12 mm Lindemann Cutter II HI-LINE XS instruments under solicitation SPE2DS-26-T-264S, with a unit price of $5.00 and a total value of $25.00. The item is classified under NSN 6515-01-549-6161 and is regulated by the FDA, requiring the contracting official to refer the bid to a product specialist for confirmation, including details on the bidder, manufacturer, part number, and description. The equipment must be supplied with clear source and part number identification, with eligible manufacturers including Aesculap, Inc. and Trillamed LLC. All packaging must comply with commercial standards as specified in the procurement document, ensuring sealed unit containers protect against damage and shipping containers enable safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 replaces MIL-STD-129 as the governing marking requirement, and copies must be obtained directly from DLA Troop Support or via the DLA website. Delivery is required within 20 days FOB destination to the USNS COMFORT, FPO AE 09566-4008, with no variance allowed in quantity. The contract requires palletization per DLA packaging guidelines and references specific logistics protocols for transportation and shipping. The response deadline is July 29, 2026, with an original required delivery date of July 22, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEALThis tracheal tube is designed exclusively for veterinary use and manufactured from clear medical-grade PVC with a 11mm inner diameter (33 French) and a total length of 520mm. It features a sterile, radiopaque design with 1cm graduations to indicate insertion depth, a beveled tip with a Murphy eye for improved airflow, and a non-tapered standard 15mm connector for compatibility with standard anesthesia circuits. The tube includes a specially engineered high-volume, low-pressure cuff that is firmly secured with a pilot balloon equipped with a spring-loaded one-way valve for precise inflation control. Clear insertion depth indication marks assist in proper placement during procedures. The item must meet strict shelf-life requirements, with a mandatory 36-month shelf life from the date of manufacture that is non-extendable, and no more than five months may have elapsed between manufacturing and delivery to the government. Packaging must comply with DLA requirements and the item is subject to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6515-01-733-0824, with a quantity of four units required under solicitation SPE2DS-26-T-265A, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. Delivery is mandated within 20 days of award, and the place of performance is in San Antonio, Texas. Primary point of contact for inquiries is Patrick Esposito at DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGIThe contract is for a single procurement unit of a thoracic surgical drainage tube, 32 French gauge, radiopaque, straight, disposable, and sterile, supplied in packs of ten. The item is identified by NSN 6515-00-763-7366 and is required to meet the technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. The packaging must comply with DLA packaging standards, and the item must be furnished in a manner that allows for the removal of government identification from non-accepted supplies. Delivery is required within 63 days of award, with the place of performance listed as APO 96260-5479. This procurement is governed under solicitation SPE2DS-26-T-262U, posted on July 23, 2026, with responses due by July 29, 2026. It falls under NAICS code 339112 for surgical and medical instrument manufacturing and is managed by the Department of Defense’s Medical Supply Chain. Covered defense information may apply, and the primary point of contact is Chandler Alvarez, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CONDOMThe contract specifies the procurement of FC2 Female Condoms, sold in internal condom packs of 12 units per pack, with a total quantity of five packs required. Each unit must have a minimum shelf life of 48 months from the manufacturer’s date, and no more than seven months may have elapsed between the date of manufacture and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards as outlined in the procurement documentation, with each condom unit sealed in a protective container to prevent damage, and all shipments housed in exterior containers suitable for safe transport by common carrier at the lowest possible cost to the designated delivery point. The item is classified as a Type I (Code R) shelf-life item with a non-extendable 48-month limit, and all packaging, marking, and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6515-01-717-0170, with a delivery deadline of 20 days after award, and bidders must clearly identify the source and part number being offered. The contract falls under the Department of Defense and is managed by the Medical Supply Chain MD Surg FSF, with solicitation details tied to SPE2DS-26-T-265U.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
INFUSOR, PRESSURE, BLOODThe contract specifies the procurement of 4 boxes of a disposable pressure infusor designed for blood collecting and dispensing, with each box containing 12 units for a total of 48 units. Each infusor is a 1000ml bag equipped with a dual-pressure safety valve, one-handed pressurization and deflation mechanism, and a rigid hanger that securely slips over IV poles without puncturing the fluid bag, even during pressure loss. The device measures 7.25 inches in width, 6.00 inches in thickness, and 11.75 inches in length, and is non-sterile. The product must have a minimum shelf life of 36 months, with no more than five months having elapsed from the manufacturer’s date to the delivery date to the government. Packaging and labeling must comply with the latest Medical Marking Standard No. 1 and DLA packaging requirements. The product is identified by NSN 6515-01-706-5795 and must be supplied with the source and part number clearly specified. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and delivery is required within five days of award to Fort Bragg, North Carolina. The solicitation, numbered SPE2DS-26-T-263Y, was posted on July 23, 2026, with responses due by July 29, 2026, under the NAICS code 339112 for medical device manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DRAIN, SURGICALThe contract specifies the procurement of a Malecot surgical drain, 24 FR, adult size, constructed from latex rubber with a four-wing retention head and a reinforced tip, where the head size is proportionate to the shaft diameter. Each unit must be packaged in a sealed container that protects against damage or breakage, and shipped in commercial exterior containers suitable for safe delivery by common carriers at the lowest rate to the designated delivery point at Fort Bliss, Texas. All items must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and packaging must adhere to DLA packaging requirements. The unit of issue is a package of six drains, and the NSN is 6515-01-153-5350. The item is subject to technical and quality requirements listed in the DLA Master List, with the applicable revision determined by the solicitation or award date. Bidders must clearly identify the source and part number being supplied. The solicitation number is SPE2DS-26-T-267M, with a response deadline of July 29, 2026, and delivery required within 20 days after award. The point of contact for inquiries is Michael Small at DLA Troop Support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
INTRAOSSEOUS INFUSIONThe intraosseous infusion system is a medical device designed for rapid fluid resuscitation in pre-hospital and hospital emergency settings, specifically to treat hemorrhagic shock. It features a clear plastic infusion tube with a stainless steel bone portal tip and Luer connector, an introducer, a target strain-relief patch, and a clear plastic protector dome, all engineered for durability and ease of use in high-stress environments. Each unit is packaged as a single complete system, with the unit of issue being a package containing ten units. The product must have an 18-month shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards specified in the procurement document, ensuring each unit is sealed in a container that protects against damage and breakage, while shipping containers must ensure safe, cost-effective delivery to the designated point of performance, which is Fort Bragg, North Carolina. All labeling must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and must include the manufacturer date, expiration or retest date, contract number, and lot number. The product is identified by NSN 6515-01-530-6147, and all technical and quality requirements referenced in the DLA Master List must be met. This solicitation, issued by the Department of Defense under SPE2DS-26-T-263S, requires delivery within five days of award and is targeted toward federal acquisition with no set-aside designation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
INTRAOSSEOUS INFUSI
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 334511
New
DIBBS
BLOOD RECIPIENT SETThe blood recipient set is a sterile, disposable indirect transfusion device with a standard blood filter ranging from 170 to 260 microns, a male luer lock adapter, and a Y-type blood/solution set measuring 98 inches overall, designed for precise fluid delivery at 10 drops per milliliter. Each unit is packed in quantities of 48 per box, adhering strictly to commercial packaging standards and the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 and MIL-STD-129. Packaging must ensure protection against damage, meet medical marking standard No. 1, and be palletized per DLA procurement guidelines, with all items marked and labeled accordingly for traceability and compliance. The product is manufactured by Baxter Healthcare Corporation under part number 2C6720 and is identified by NSN 6515-01-462-5563. The contract specifies delivery within five days FOB destination with zero quantity variance, inspection and acceptance occurring at the delivery point. Two separate delivery lines are listed, each requiring shipment to different Fort Bragg locations in North Carolina via the fastest traceable means, prohibiting parcel post. Delivery deadlines are set for July 17, 2026, and July 27, 2026, with specific freight shipping addresses and contact details for each recipient unit. Government use identifiers, project codes, and tracking data are included for internal logistics administration, and all documentation must align with DoD authorized units of issue. The solicitation, issued under SPE2DS-26-T-268R, was posted July 23, 2026, with responses due by July 29, 2026, and falls under NAICS code 334511 for medical device manufacturing, procured by the Department of Defense’s Medical Supply Chain for surgical and field support operations.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
SENSOR, OXYGEN MONITORIThe contract involves the procurement of three oxygen monitoring sensors with plastic housings and electrical cells, designated by NSN 6515-01-318-1535, for delivery within 84 days to APO 96260-5479. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all items must be properly identified in accordance with this standard. The sensors have a non-extendable shelf life of 96 months and are classified as a Type I (Code U) item under RS026 requirements. The solicitation incorporates applicable technical and quality standards from the DLA Master List, and suppliers must provide the source and part number being offered. The contract is subject to covered defense information protocols under RD003 and requires removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements as outlined in section B of SPE2DS-26-T-262T, and all bids must be submitted by the response deadline of July 29, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
TEST STRIPS AND COLORThe contract specifies the procurement of urine test strips and color charts capable of detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen, each packaged in bottles of 100 strips per unit, with a total quantity of two units required. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and are subject to medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection against damage and safe delivery via common carriers at the lowest cost, with all labels clearly displaying the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C guidelines. A shelf-life requirement of 18 months is mandatory and non-extendable, with no more than two months allowed to have elapsed between the date of manufacture and the date of delivery to the government. The items are classified as a TYPE I (CODE K) item under the shelf-life specification, and all labeling must conform to the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-263E, issued on July 23, 2026, with responses due by July 29, 2026, and delivery required within five days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue designated as the primary point of contact. The NSN is 6550-01-221-5400, and the NAICS code is 325412, identifying the industry as medical and surgical instrument manufacturing.
Pharmaceutical Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLEThe contract specifies the procurement of disposable applicators with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a suitable container to prevent damage or breakage and packed in commercial shipping containers that ensure safe delivery via common carrier at the lowest cost to the designated destination. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and markings must adhere to the latest edition of this standard available through DLA Troop Support. The unit of issue is a package (PG) containing 75 units, and packaging must meet MIL-STD-2073-1E requirements. The item is regulated by the FDA under Class I, with regulation 880.6025, and while a 510(k) is not required, compliance with registration, listing, labeling, and GMPs is mandatory. The contract mandates no substitutions and requires bidders to provide the source and part number, with approved suppliers including Cardinal Health 200, LLC, Medline Industries, LP, and NICE-PAK Products Inc. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The NSN is 6515-01-316-9295, and the solicitation number is SPE2DS-26-T-266C, with a response deadline of July 29, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLEThe contract specifies the procurement of 100 disposable povidone-iodine applicator swab sticks, packaged in two units of issue, each containing 50 applicators. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe delivery via common carrier to the designated point of performance in APO, ZIP 96319-5024, at the lowest possible shipping cost. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all labeling must include the manufacturer’s date, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. The product must have a minimum shelf life of 15 months, with no more than two months having elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers. The solicitation, issued under contract number SPE2DS-26-T-265P, requires bidders to disclose the source and part number being supplied, and responses are due by July 29, 2026, with delivery due within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
PENCIL, ELECTRODE, ELECTThe contract specifies the procurement of a sterile, disposable electrosurgical pencil electrode designed for use with the CONMED System 5000, featuring a polytetrafluoroethylene handle, latex-free construction, a push-button switch, a 1-inch ultraclean blade, and a 10-foot cable. Each unit is packaged in a sealed container to protect against damage and must be shipped in commercial exterior containers suitable for safe delivery at the lowest cost to Fort Bragg, North Carolina. The product must have a 60-month shelf life, with no more than nine months elapsed between manufacture and government delivery. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must include the NSN 6515-01-575-6486, manufacturer and CAGE code, date of manufacture or expiration, and contract or lot number. The unit of issue is a package of 40 units, and bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-264A, requires compliance with DLA’s Technical and Quality Requirements, includes provisions for handling covered defense information, and mandates removal of government identification from non-accepted supplies. The contract was posted on July 23, 2026, with a response deadline of July 29, 2026, and delivery is required within five days of award.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape measuring 6 inches wide by 10 yards long, packaged in units of 12 rolls per package, for a total quantity of three packages. The product must be Medipore brand and comply with stringent shelf-life requirements, including a mandatory 60-month shelf life from the date of manufacture, with no more than 51 months having elapsed between manufacturing and delivery to the government. All labeling must conform to the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, and the contract and lot numbers. The item is governed by multiple technical and quality requirements, including RS023 for non-extendable shelf-life control, RD003 for potential covered defense information, RP001 for DLA packaging standards, and RQ011 regarding removal of government identification from non-accepted supplies. Bidders are required to provide the specific source and part number being supplied, and the procurement is linked to NSN 6510-01-588-1947 under solicitation SPE2DS-26-T-263F, with a response deadline of July 29, 2026, and a delivery requirement within five days of award to Fort Bragg, North Carolina. The contract falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain.
Corrugated and Solid Fiber Box Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details