This Solicitation opportunity from Department Of Defense was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CASE, STERILIZATION
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract outlines the procurement of a sterilization and storage case specifically designed for K-wire and Steinmann pins. The case measures 11.75 by 5.25 by 2 inches when closed, features an autoclave-safe removable lid, and is constructed from anodized aluminum. It is capable of securely holding wires in lengths of 4, 6, and 9 inches, as well as 9-inch Steinmann pins. The item is requested as a single unit per order. Packaging requirements specify that the product must be commercially packed in sealed unit containers to ensure protection against damage during shipping, with exterior shipping containers suitable for acceptance and safe delivery through common carriers. The material must be marked according to Medical Marking Standard No. 1, replacing the older MIL-STD-129 standard. The contract references compliance with specific technical and quality requirements, with the applicable master list revisions governing the terms depending on acquisition size and amendment dates. The contract is managed by the Department of Defense’s Medical Supply Chain and specifies a 20-day delivery timeframe after order placement.
General Info
Agency
NAICS
Place of Performance
UNIT 2497 CP 011 496 371 46 2418, APO, AE, 09094-3219, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
CASE, STERILIZATION AND STORAGE, PINS AND WIRES
K-WIRE AND STEINMANN PIN STERILIZATION CASE NO.1;
11.75 X 5.25 X 2 IN CLOSED;
AUTOCLAVABLE REMOVABLE LID CLOSED;
ANODIZED ALUMINUM; HOLDS 4 IN<(>,<)>
6 IN AND 9 IN WIRES AND 9 IN STEINMANN PINS.
UNIT OF ISSUE: EACH
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
SPE2DS-26-T-087E
SECTION B
https://www.dla.mil/Logistics-Operations/Packaging/
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-710-7851 Quantity: 1 EA Purchase Request: 7016838946QTY: 1 Delivery: 20 days ADO