Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CASTER, SWIVEL

Active
SPE7L1-26-T-825GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a swivel caster, identified by NSN 5340-01-511-7402, with a quantity of one unit and a delivery requirement of 20 days ADO. The solicitation is governed by SPE7L1-26-T-825G and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective based on the solicitation issue date or award date, depending on acquisition size. Manufacturing may involve casting or forging processes, and if the government lacks the necessary tooling, suppliers must seek assistance through the designated DLA casting and forging portal. The item must comply with MIL-STD-130N for identification marking and be manufactured to the current revision of the applicable part standard, with past revisions still acceptable for previously produced hardware. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in functional applications such as batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise stated, with attribute identification levels assigned as VII for critical, IV for major, and II for minor characteristics. The procurement is fully competitive under a military or federal specification, with the solicitation posted on July 12, 2026, and responses due by July 23, 2026, coordinated through the DLA Land Supply Chain organization.

General Info

One swivel caster NSN 5340-01-511-7402 due in 20 days, must comply with MIL-STD-130N, no mercury, zero defects, full competition.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-825G for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CASTER,SWIVEL
CASTER,SWIVEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD DEFINING THIS ITEM IS ACCEPTABLE. HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT, REVISION OF THE STANDARD IS ACCEPTABLE. ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD, SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
SPE7L1-26-T-825G
SECTION B
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5340-01-511-7402 Quantity: 1 EA Purchase Request: 7017443857QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
PIN, COTTERThe contract pertains to the procurement of a PIN COTTER identified by NSN 5315-00-187-9488, with a quantity of one HD, to be delivered within 20 days from the date of award under solicitation SPE4A6-26-T-05KP. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking without special codes. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, and directed to USS KEARSARGE LHD 3, FPO AE 09534. Mercury and mercury-containing compounds are strictly prohibited in any component, preservation, packaging, or marking unless explicitly exempted for functional uses such as specified batteries, instruments, sensors, weapon systems, or NAVSEA-released chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs as defined by specification. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List effective on the solicitation or award date, depending on acquisition size. The supply must conform to NASM24665 Rev 03 and ASME B18.8.1 (2019 reaffirmed) standards, with certification of conformance authorized unless superseded by a quality assurance letter of instruction. The required delivery date is June 24, 2026, and performance is subject to DLA procedural notes C19 and C20 for transportation logistics.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
DOOR, ACCESS, UTILITYThe contract pertains to the procurement of a door, access, utility item identified by NSN 5340-12-352-2406, with a requirement for one unit to be delivered within ten days of award. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. This is a federal solicitation issued under NAICS code 332510 by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-825K, posted on July 12, 2026, and responses due by July 23, 2026. The primary point of contact is Michael Nordahl, reachable via email and phone provided, and all communications and submissions must be made through the DIBBS portal linked in the contract data.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract pertains to the procurement of a retaining ring with NSN 5325-01-289-1864 and part number C611.049 from CORTLAND INDUSTRIAL LLC, requiring delivery of nine units within five days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and packing must comply with ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item must be delivered FOB origin to the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight shipping directed to a specified address. Parcel post is strictly prohibited; shipments must use the fastest traceable means. Inspection and acceptance occur at the destination, with no tolerance in quantity variance. The contract number is SPE4A6-26-T-05MB, with a required delivery date of July 8, 2026, and the sole point of contact is Duane Watkins.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PLUG, VENTThe contract pertains to the procurement of 113 units of a PLUG, VENT with NSN 5340-01-687-6611 under solicitation SPE7L1-26-U-0466, issued by the Department of Defense’s Land Supply Chain. The solicitation was posted on July 12, 2026, with a response deadline of July 27, 2026, and requires delivery within 140 days after award. Technical and quality standards referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless superseded by an amendment. Source approval documentation is mandatory, and non-accepted supplies must have all government identification removed prior to disposition. The primary point of contact for inquiries is Jennifer Payne at the DLA, reachable via email and phone. The procurement falls under NAICS code 332510 and is classified as a federal acquisition with no set-aside designation.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThis contract specifies the procurement of 50 blind rivets identified by NSN 5320-01-460-3780 and part numbers CR6252-5-06 and AF9252-5-06, classified as a commercial item under solicitation SPE4A6-26-T-05ME. The unit price is $0.00 per unit with a total value of $50.00, requiring delivery within five days of contract award at FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The delivery address is the Special Operations Forces Support Activity in Lexington, Kentucky, and shipping must be via the fastest traceable means—parcel post is explicitly prohibited. The required delivery date is November 7, 2025, and the contract is governed by DLA’s acquisition policies, including the use of authorized units of issue and compliance with technical specifications identified by R or I numbers from the DLA master list.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details