Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING, RETAINING

Active
SPE4A6-26-T-05MBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a retaining ring with NSN 5325-01-289-1864 and part number C611.049 from CORTLAND INDUSTRIAL LLC, requiring delivery of nine units within five days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and packing must comply with ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item must be delivered FOB origin to the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight shipping directed to a specified address. Parcel post is strictly prohibited; shipments must use the fastest traceable means. Inspection and acceptance occur at the destination, with no tolerance in quantity variance. The contract number is SPE4A6-26-T-05MB, with a required delivery date of July 8, 2026, and the sole point of contact is Duane Watkins.

General Info

Procure nine retaining rings NSN 5325-01-289-1864, deliver FOB origin by July 8, 2026, per DLA standards, no parcel post.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

NAVAL AIR STATION, JACKSONVILLE, FL, 32212-0016, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05MB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
DUANE WATKINS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,RETAINING
RING, RETAINING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CORTLAND INDUSTRIAL LLC 6X552 P/N C611.049
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017397635 0001 EA 9.000
NSN/MATERIAL:5325012891864
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE4A6-26-T-05MB
SECTION B
PR: 7017397635 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65886
FLEET READINESS CENTER SOUTHEAST
BLDG 101 NADEP N65886
NAVAL AIR STATION
JACKSONVILLE FL 32212-0016
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65886
FLEET READINESS CENTER SOUTHEAST
109 YORKTOWN AVE
AVIATION RETAIL STOCK NAS
JACKSONVILLE FL 32212-0103
US
M/F: (TCN) N658866183A008
RDD: 183
PROJ: 705 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: FC: PS
Need Ship Date:00/00/0000 Original Required Delivery Date:07/08/2026
SPE4A6-26-T-05MB NSN/Part Number: 5325-01-289-1864 Quantity: 9 EA Purchase Request: 7017397635QTY: 9 Delivery: 5 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
COVER, ACCESSThe contract pertains to the supply of COVER, ACCESS with NSN 5340-01-314-5602, totaling 801 units, under solicitation SPE7L4-26-U-0954, which is open for full and open competition. Delivery is required within 143 days after contract award, and responses must be submitted by July 27, 2026. The procurement is governed by stringent cybersecurity and export control requirements, including mandatory CMMC Level 2 certification for the offering organization, as well as adherence to DLA’s technical and quality standards referenced in the Master List. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, even within the United States, and requires contractors to possess valid US/Canada Joint Certification Program credentials, complete mandatory DOD export control training, and receive formal approval from DLA to access controlled data. DFARS 252.225-7048 applies to safeguarding this technical information. The contractor must comply with DLA packaging standards and protocols for removal of government identification from non-accepted supplies. Drawings are accessible only during the open solicitation period via the DIBBS portal, and the primary point of contact for inquiries is Heather Kessler at the Department of Defense’s LSO Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThis contract specifies the procurement of 50 blind rivets identified by NSN 5320-01-460-3780 and part numbers CR6252-5-06 and AF9252-5-06, classified as a commercial item under solicitation SPE4A6-26-T-05ME. The unit price is $0.00 per unit with a total value of $50.00, requiring delivery within five days of contract award at FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The delivery address is the Special Operations Forces Support Activity in Lexington, Kentucky, and shipping must be via the fastest traceable means—parcel post is explicitly prohibited. The required delivery date is November 7, 2025, and the contract is governed by DLA’s acquisition policies, including the use of authorized units of issue and compliance with technical specifications identified by R or I numbers from the DLA master list.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVETThe contract is for the procurement of 80 PIN-RIVET units with NSN 5320-01-231-3331 under Purchase Request 7017271533, with a delivery requirement of 152 days after award. The solicitation number is SPE4A6-26-T-05LZ, issued by the ASC Commodities Division of the Department of Defense, and was posted on July 12, 2026, with responses due by July 20, 2026. The North American Industry Classification System code is 332510, and the place of performance is Robins Air Force Base, Georgia, with a ZIP code of 31098-1887. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the type of acquisition—simplified or large—with specific controls tied to the solicitation or award date. Government identification must be removed from any non-accepted supplies, and the data provided is considered proprietary or insufficient for competitive procurement without additional information. Primary point of contact is Susan Barlow, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, SThis contract specifies the procurement of one standoff, threaded, S, with NSN 5340-01-126-5432 and part number 125484-001, manufactured by Astronautics Corporation of America in Milwaukee, WI. The item must comply with DLA packaging requirements as defined in RP001 and technical/quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containerization, including preservation method 10, no lubricant, and packaging level B. Marking must follow MIL-STD-129 with no special marking codes. The shipment is destined for Fort Wainwright, AK, with the government billing code WC1JU3 and referenced RDD 777, and transportation details align with DLAD Proc Notes C19 and C20. The contract’s solicitation number is SPE7L1-26-T-825Z, with a response deadline of July 23, 2026, and an original required delivery date of July 14, 2026. The unit of issue is each, and the point of contact for inquiries is Michael Nordahl via email and phone provided by DLA.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLEThe contract pertains to the procurement of 59 units of BRACKET, ANGLE with NSN 5340-01-123-6831 under solicitation SPE7L1-26-T-827K, issued by the Department of Defense’s Land Supply Chain. The item is subject to multiple technical, quality, and compliance requirements embedded through the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must conform to DLA standards, and the contractor must be certified under the Cybersecurity Maturity Model Certification (CMMC) Level 2 by an accredited third-party assessment organization. Technical data associated with this item is controlled under ITAR or EAR, restricting its export or disclosure to foreign persons, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The delivery deadline is 165 days after order, with performance location specified as Anniston, Alabama, 36201-4199. The solicitation was posted on July 12, 2026, with responses due by July 23, 2026, and the NAICS code is 332510 for forging, stamping, and pressing. Primary point of contact is Michael Nordahl at DLA’s FLBC2PRS office.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details