This Government Contract opportunity from Department Of Defense was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Casting or Forging Supply for Aerospace Bushing

Closed

Federal

Submission Closed09/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Nashville Electric Service is soliciting bids for the procurement of Figure 8 swing chain links under solicitation Z5418. The required items must be forged steel double eye chain links with two 7/8 inch eyes and an ultimate strength of 30,000 pounds. All links must be galvanized according to the latest revision of ASTM A123. Acceptable manufacturers are limited to Hubbel LK830 or Line Har FL8-30, and alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on October 29, 2026. Offerors are required to specify their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The primary procurement contact for this solicitation is Alan Martinez. Any discrepancies between the ordering description and part number must be clarified with the buyer prior to the closing date.

Nashville Electric Service

POSTED

DEADLINE

Supply of Raw Material for Pin-Rivet FabricationThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of raw metal stock, castings, or forgings required for pin-rivet fabrication. The selected provider will source and deliver materials that strictly adhere to the metallurgical specifications of NSN 5320-01-365-6361. To ensure quality and compliance, the contractor is required to provide comprehensive material certifications and Mill Test Reports, while maintaining full adherence to the Buy American Act. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, regarding this requirement categorized under NAICS code 332111. The scope focuses on delivering certified raw materials or semi-finished components to prime contractors supporting DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Permanent Type Fluid Pressure Filters (NSN 4330005551299)This subcontract involves the manufacture or procurement of nine permanent-type fluid pressure filters for the DLA Weapons Support Maritime Supply Chain. The required components must match Part Number 50824 and feature reusable Monel wire-wound filtration elements with 0.002 inch spacing and 3/4-16-NF-3 female right-hand threaded connections. Additionally, the filters must be equipped with high-pressure housings rated for 3000 PSI. The project mandates strict adherence to the Buy American Act, ASTM D3951, and MIL-STD-129 standards. Performance will take place in Jacksonville, Florida, under NAICS code 332111. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Forging Services (Rough Shape)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the initial forging of gun mount yoke blanks under NSN 1285012308081. The selected provider will utilize industrial forging processes, including heavy forging presses, dies, and heat-treatment furnaces, to produce rough shapes for prime contractors. Performance of the work will take place in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332111. A critical requirement of the contract is strict adherence to the Buy American Act and the Berry Amendment to ensure all metal is sourced domestically. Responses are due by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Casting and Forging for Motor Controller ComponentsThis subcontract, titled Precision Casting and Forging for Motor Controller Components, involves the fabrication of raw metal blanks for NSN 6110-01-409-1405. The selected provider will perform casting and forging operations for prime contractors supporting DLA supply contracts, ensuring all work adheres strictly to technical drawings and specifications. A critical requirement of the contract is the provision of detailed identification regarding sources and processes for all critical operations, which must receive formal approval from the Government Design Control Activity. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, the project falls under NAICS code 332111. Performance of the contract is located in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, to meet the requirements for delivering these essential motor controller components.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Grade Material Supply (Forgings/Castings)This subcontract opportunity is for the supply of raw aerospace-grade forgings or castings to support prime contractors on Depot Oklahoma projects at Tinker AFB. The selected provider must source metal stock that strictly adheres to the specifications outlined in Reference Drawing NR 76823 3-52928-092878. Key deliverables include the raw material stock along with comprehensive traceability documentation, specifically Material Test Reports and Certificates of Conformance. The contract is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332111. To be eligible, the supplier must maintain ISO 9001 standards and ensure full compliance with the Buy American Act. Interested parties must submit their responses by November 2, 2026.

POSTED

DEADLINE

Bronze Valve Piston Casting/ForgingThis subcontract involves the casting or forging of bronze valve piston blanks for prime contractors supporting the Defense Logistics Agency. The contractor must produce rough or semi-finished components according to Part Number 49933F specifications using traditional subtractive or formative manufacturing methods, as additive manufacturing is strictly prohibited. All materials must be free of mercury or mercury-containing compounds to ensure compliance with safety and quality standards. The project is managed under the Department of Defense in San Diego and requires strict adherence to the Buy American Act and DFARS 252.225-7001 regulations. Interested parties must respond by November 2, 2026, to provide these specialized bronze components under NAICS code 332111.

POSTED

DEADLINE

Specialized Material Supply for Straight Headed PinsThis subcontract involves the supply of specialized raw metal stock for prime contractors working on DLA Weapons Support ASC projects, specifically for the production of straight headed pins. The supplier is responsible for sourcing and delivering raw materials that strictly adhere to the chemical and physical properties defined in Drawing NR 78286. To ensure the integrity of Critical Application Items, the provider must supply full material certifications and Mill Test Reports to maintain complete traceability. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must adhere to the response deadline of October 30, 2026. The procurement falls under NAICS code 332111, focusing on the delivery of certified raw material stock that meets rigorous military specifications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Forged Steel Gear Blank ManufacturingThis subcontract for Forged Steel Gear Blank Manufacturing supports DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected contractor will be responsible for the design and fabrication of custom tooling and the use of industrial forging presses to produce raw gear blanks according to Technical Data Package Rev A Gen 1. These components must be delivered in a state ready for precision machining. Compliance is mandatory with ISO 9001:2015 quality standards, the Berry Amendment, the Buy American Act, and the Balance of Payments Program. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332111.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Aerospace-Grade Copper StockThis subcontract involves the supply of high-purity aerospace-grade copper raw material, specifically tubing or bar stock, to support prime contractors working with the DLA Weapons Support Fluid Handling Division for B52 aircraft. The selected provider is responsible for sourcing and certifying that all materials are mercury-free and must provide Material Test Reports and Certificates of Conformance in strict accordance with the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332111, with performance taking place at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the certified copper raw materials required for these Department of Defense operations.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Stainless Steel Pipe Coupling Casting/ForgingThis subcontract involves the casting or forging of stainless steel pipe coupling blanks for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work focuses on creating raw forms and managing the necessary tooling for Admiral Valve LLC part number 99565 P/N H847-12-SS, identified by NSN 4730-00-988-7193. The final deliverables consist of rough or semi-finished coupling blanks. The project is governed by strict regulatory standards, requiring full compliance with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Performance will take place in Tracy, California, under NAICS code 332111. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0153

Solicitation SPE8E4-27-T-0153 is a request for quotations from the Defense Logistics Agency Troop Support for the procurement of 15 feet of Grade B16 steel metal bar. The material must be hot rolled, round, quenched and tempered, with a diameter of 0.438 inches and lengths between 12 and 20 feet, weighing 0.511 lb/ft. This procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSDL), and a Certificate of Quality Compliance (Mill-Material Certification) is required for every shipment. The items are to be delivered FOB Destination to Naval Base Rota, Spain, with an original required delivery date of September 24, 2026, and a delivery window of 20 days after award. The contract mandates strict adherence to marking and packaging standards, requiring continuous identification markings via stamping or stenciling and packaging in accordance with ASTM D3951 and MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, including specific references to ASTM A193/A193M-26 and ASTM A700-14. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity requirements under DFARS 252.204-7012. A price evaluation preference is available for certified HUBZone small business concerns.

Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

This subcontract, issued by the Department of Defense through the ASC Commodities Division, involves the supply of raw cast or forged blanks for aerospace bushings used in DLA Aviation projects. The selected provider will be responsible for casting or forging base materials using aerospace-grade alloys, ensuring they are produced to the specific dimensions required for subsequent machining. A critical requirement of the contract is the provision of material certifications to verify that the alloys strictly adhere to the specifications outlined in TDP Rev A Gen 2. The scope of work culminates in the delivery of one cast or forged blank. The solicitation was posted on September 1, 2026, with a response deadline of September 9, 2026, under NAICS code 332111.

General Info

DoD subcontract for one aerospace bushing blank meeting TDP Rev A Gen 2 specifications.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332111 - Iron and Steel Forging

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-Q-1397.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 1

subcontract

Response DeadlineSep 9

Deadline has passed

Submission Closed

09/09/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies raw cast or forged blanks for prime contractors on DLA Aviation projects. Casts or forges base material to dimensions required for subsequent machining using aerospace-grade alloys. Provides material certifications proving the alloy meets specifications outlined in TDP Rev A Gen 2. Delivers one cast or forged blank.