Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Caterpillar Engine Overhaul Parts Supplier

Active

Federal

Response Deadline10/13/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the supply of genuine or approved equivalent Caterpillar engine components to support prime contractors on US Coast Guard SFLC Procurement Branch 2 projects. The scope of work involves sourcing and delivering specific parts, including thermocouples, hoses, thrust washers, bearings, shield assemblies, and seals or O-rings, required for the center section overhaul of #1 and #2 SSDGs. All materials must match specified part numbers and be delivered to the US Coast Guard Base in North Charleston, South Carolina. Managed by the Department of Homeland Security, this procurement is designated as a total Small Business Set Aside under NAICS code 423810. The solicitation was posted on September 29, 2026, with a response deadline of October 13, 2026.

General Info

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

423810 - Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

Place of Performance

North Charleston, SC, 29405, USA

Set-Aside

SBA

Documents

This scope was carved out of 70Z08526Q0028413.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC James CAT Parts for Center Section Overhaul

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 29

subcontract

Response DeadlineOct 13

Submission deadline

Response Deadline

10/13/2026, 03:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies genuine or approved equivalent Caterpillar (CAT) engine components for prime contractors on US Coast Guard SFLC Procurement Branch 2 projects. Sources and delivers thermocouples, hoses, thrust washers, bearings, shield assemblies, and seals/O-rings matching specific part numbers for the #1 and #2 SSDG center section overhaul. Delivers all listed parts to US Coast Guard Base Charleston, North Charleston, SC.

Similar Contracts

Same NAICS industry code

Vehicle Hardware Supply/Distribution

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

Fog Light Component Supplier (Mack/Volvo)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Slide Mount Hardware

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supplier of ZF Transmission/Drivetrain ComponentsThis subcontract involves the supply of precision metal components, specifically part ZF_225_7000_081, to support prime contractors for the Department of Defense Maritime Supply Chain. The supplier is responsible for sourcing parts that strictly adhere to the DLA Master List of Technical and Quality Requirements and ensuring all items are packaged according to RP001 standards. Deliveries are to be made FOB Destination, with performance based in Tracy, California. To maintain compliance, the supplier must certify the domestic content status of the components and adhere to NIST SP 800-171 standards for the handling of Controlled Unclassified Information. This opportunity falls under NAICS code 423810 and was posted on October 1, 2026, with a response deadline of October 19, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Vent Valve SupplierThis subcontract involves the procurement or manufacture of vent valves meeting NSN 4820-01-107-9003 to support prime contractors delivering on DLA Land and Maritime supply contracts. The selected supplier is responsible for ensuring all items are delivered to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to regulatory standards is required, specifically regarding C03 Contractor Retention of Supply Chain Traceability Documentation for audit purposes and RP001 DLA Packaging Requirements. The opportunity is categorized under NAICS code 423810 and is managed through the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Parker Hannifin Spool Stop

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Control Assembly, Push- (NSN 2590013424113)This subcontract involves the supply of Push- Control Assemblies, specifically part number 74000999 from All-Safe Inc, for prime contractors supporting Department of Defense supply contracts. Managed by the Land Supplier Operations Vehicle Support agency, the contract requires that all hardware meets the technical and quality specifications outlined in the DLA Master List. The provider must adhere to RP001 DLA Packaging Requirements for Procurement and FAR 52.246-2 Destination Inspection standards. Performance for this contract is based in Laurens, South Carolina, under NAICS code 423810. The solicitation period opens on October 1, 2026, with a response deadline of October 13, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Carver Pump Company Gasket

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Vehicle Dismantling & Salvage ServicesThis subcontract for Vehicle Dismantling and Salvage Services involves the physical dismantling of passenger, commercial, and recreational vehicles, boats, and trailers to support Los Angeles Police Commission recycling projects. The selected provider will be responsible for removing reusable parts, sorting scrap metal, managing vehicle storage, and delivering both the dismantled vehicles and a comprehensive salvage inventory to the prime contractor. To qualify, contractors must possess a valid Dismantlers License from the State of California DMV and operate a facility capable of handling recycling tasks on a weekly and monthly basis. The project is based in Los Angeles, with a response deadline set for December 17, 2026.

POSTED

DEADLINE

The Harrison County Board of Supervisors will receive Electronic or Sealed Bids for the following: ROAD EQUIPMENT: One (1) New Small Crawler Dozer Bids will be received at the Board Conference Room in the First Judicial District Courthouse located at 18

Solicitation # 3170036688

The Harrison County Board of Supervisors is soliciting electronic or sealed bids for the procurement of one new small crawler dozer under solicitation number 3170036688. This road equipment falls under the category of earth road equipment, blades, and edges. Interested vendors can access detailed bid specification packets through the official county bids website. Bids must be submitted by October 13, 2026, at 10:00 AM CST. Electronic submissions are accepted via the county's online portal, while sealed bids may be delivered to the Harrison County Chancery Clerk's Office or the Board of Supervisors' Conference Room at the First Judicial District Courthouse in Gulfport, Mississippi. Sealed envelopes must be clearly marked with the equipment description and the opening date. The contract will be awarded based on a lowest bid determination, although the owner reserves the right to use a best bid determination for specific items. The Board may hold bids for up to 30 days to review submissions and investigate the qualifications of the vendor and their equipment. For any inquiries regarding this solicitation, the point of contact is Judy Williams.

POSTED

DEADLINE

Mid-Sized Equipment

Solicitation # 178-2026-Continuous

The Government of Saskatchewan Ministry of Parks, Culture and Sport is seeking qualified suppliers for the provision and delivery of various mid-sized equipment. The scope of this request for supplier qualifications includes, but is not limited to, compact excavators, skid steers, compact track loaders, compact wheel loaders, and tractors of various sizes. This solicitation, identified by number 178-2026-Continuous, is open for responses until September 28, 2031. Interested suppliers must be registered in the Government Enterprise Management system to participate. Registration is mandatory for downloading competition documents, submitting inquiries, receiving official amendments, and submitting a final bid. All procurement activities, including the submission of qualifications and access to the Supplier Portal, are managed electronically through the GEM platform.

Parks, Culture and Sport

POSTED

DEADLINE

in almost 5 years

4.25” Sonic Drill rod, TSI spindle and adapters

Solicitation # SRC0000042180

Solicitation SRC0000042180 is a request for quotations issued by the State of Ohio on behalf of the Department of Natural Resources Division of Mineral Resources Management for the procurement of 4.25 inch sonic drill rods, TSI spindles, and various adapters. The contract will be awarded to the lowest and most responsive bidder. The required deliverables include 17 drill rods of varying lengths, a rod adapter, a core barrel adapter, a spindle, and a comprehensive TSI spindle to TSI head flange adapter kit containing O-rings, split lock washers, and cap hex head screws. The agreement is governed by the State of Ohio Standard Terms and Conditions, requiring deliverables to be provided F.O.B. Destination/Pre-Paid/Allowed. The contractor must maintain a one-year warranty against material defects and adhere to strict executive orders prohibiting offshore service performance and data storage. Compliance requirements include maintaining a reasonable information security program aligned with NIST frameworks and adhering to accessibility standards such as WCAG 2.1 Level AA. Payment is processed via electronic funds transfer, with terms set at 30 calendar days following the receipt of a proper invoice. Additional administrative requirements include the submission of a non-member acknowledgment form regarding the Ohio Public Employees Retirement System.

Dnr-div Of Mineral Rsrcs Mgmt

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

Marine Chain and Anchor Hardware Supply

Hardware Manufacturing

POSTED

DEADLINE

Hydraulic Winch and Auxiliary Machinery Service

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Shipboard Electrical Repair and Cable Testing

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Marine Welding and Structural Repair

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Hull and Superstructure Preservation Services

Painting and Wall Covering Contractors

POSTED

DEADLINE

Repair / Overhaul Allied Systems Marine Crane Dual Point Davits

Solicitation # 70Z08526R3D035B00

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes to establish a sole-source, requirements-type contract with Allied Systems Company, the Original Equipment Manufacturer, for the open, inspection, repair, and overhaul of Allied Systems Marine Crane Dual Point Davits (Model DDP11000CTS). These services support the 418 foot WMSL cutter fleet and aim to restore equipment to a like-new Serviceable A condition. The scope of work includes non-destructive inspections, the replacement of bearings, seals, and non-structural fasteners, and structural static load testing. All work must adhere to SFLC Standard Specifications and Coast Guard drawings, with final testing intended to be witnessed by a Quality Assurance Representative. The contract is envisioned as a five-year agreement consisting of a base year and four option years, with an additional requirement for six-month extension pricing. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on technical expertise, resources, and past performance. Deliveries are designated as FOB Destination to Defense Depot Barstow, California, and must meet strict military packaging and marking requirements. Quotes are due by October 20, 2026, and must include a technical capability statement, a pricing schedule for the specified CLINs, and a signed SF1449.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

USCGC ALDER DD FY27

Solicitation # 70Z08526QIBCT0051

Solicitation RFQ 70Z08526QIBCT0051 is a total small business set-aside for the FY2027 drydock availability of the USCGC ALDER (WLB-225B). This requirement will result in an Indefinite Delivery Requirements Contract (IDR) for comprehensive ship repair and maintenance services, including hull plating, propulsion shafting, tank cleaning, and rudder overhaul. The work is to be performed at the contractor's facility, with an anticipated industrial start date of January 26, 2027, and a completion date of May 12, 2027. The anticipated award date is December 28, 2026. Quotes must be submitted via email by October 26, 2026, at 2:00 PM EST, divided into three separate parts: Price, Technical Capability, and Past Performance. Technical evaluations are based on a pass/fail rating of the contractor's planning documentation, corporate experience, and ability to meet SFLC standard specifications for welding and preservation. Past performance is evaluated on a pass/fail basis using contracts completed within the last three years. Among acceptable quotations, the award will be made to the responsible vendor offering the lowest evaluated price. Contractors must provide proof of E-verify enrollment, insurance coverage, and necessary welding certifications.

Ship Building and Repairing

POSTED

DEADLINE

HEALY-SLEP Industry Day - Deaerating Feed Tank (DFT), PLC-Based Steering Control System Replacement

Solicitation # HEALY-SLEP-Industry-Day

The United States Coast Guard is conducting market research and early industry engagement to inform the acquisition strategy for two major engineering modernization packages aboard the USCGC HEALY (WAGB-20) as part of its Service Life Extension Project. These efforts are planned for the vessel's FY2029 Maintenance Availability. The first requirement involves the design, procurement, and installation of a new deaerating feed tank and NSTM 220 V2 compliant feedwater treatment system, along with the renewal of obsolete boiler programmable logic controllers and burner sequencing controls. The second requirement is the replacement of the existing steering control system with an open-architecture, commercially available off-the-shelf PLC-based design, including the upgrade of rudder servo amplifiers, repeat backs, angle transmitters, and failure alarm panels. The procurement process includes strict technical and security standards. The steering system replacement requires comprehensive cybersecurity services to ensure compliance with Department of Homeland Security and Coast Guard Authority to Operate mandates. Mechanical installations must adhere to various ASME, ASTM, and MIL-STD specifications, with quality assurance meeting ANSI/ASQC Q9001 requirements. Performance will be validated through factory tests, shipboard integration testing, and dockside acceptance tests. Interested U.S. citizen firms must register by October 6, 2026, to participate in the scheduled industry days on October 26 and 27, which include technical overviews and guided vessel walkthroughs. This notice is for planning purposes only and does not constitute a formal request for proposal.

Ship Building and Repairing

POSTED

DEADLINE

USCGC James CAT Parts for Center Section Overhaul

Solicitation # 70Z08526Q0028413

Solicitation 70Z08526Q0028413 is a small business set-aside issued by the Department of Homeland Security, specifically the SFLC Procurement Branch 2, for the procurement of Caterpillar center section overhaul parts. The primary objective of this requirement is to support maintenance on the #1 and #2 SSDG for the CGC James to ensure they are returned to safe and reliable operations. The scope involves the delivery of a comprehensive list of engine components, including thermocouples, bearings, seals, o-rings, camshafts, and various hoses and gaskets. The required delivery date for all parts is October 14, 2026. Performance consists of the local pickup or delivery of these components to the United States Coast Guard Base Charleston, located at 1050 Register St, North Charleston, South Carolina. The solicitation was posted on September 29, 2026, with a response deadline of October 13, 2026. Primary points of contact for the procurement include Justin Wooldridge and Lindsay Mongiovi, while LT Javon Wingate and LT Christian Burzycki serve as the technical and performance contacts.

Ship Building and Repairing

POSTED

DEADLINE

Supply of Cyclotherm Burner Upgrade Kits (MC2500)

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

CGC ALEX HALEY BOILER BURNERS

Solicitation # 70Z08526Q0028777

The United States Coast Guard Surface Forces Logistics Center is soliciting a firm-fixed-price supply contract for boiler burner parts to support the CGC ALEX HALEY (WMEC-282). The requirement specifically calls for two Cyclotherm Burner Upgrade Kits (MC2500, P/N B-26292), which include a 60hp burner, oil pilot burner, and a reduced blower configuration. These components are necessary to correct incomplete combustion and excessive soot to ensure safe boiler operations during the Alaskan winter. All items must be delivered as a complete order using standard commercial packaging to Kodiak, Alaska, by November 20, 2026, on an F.O.B. Destination basis. This acquisition is a 100% total small business set-aside under NAICS code 333414 (or 332410) and Product Service Code 4530. Award will be granted to the responsible offeror providing the lowest evaluated price among those deemed acceptable in technical capability and past performance. Technical capability is evaluated on a pass/fail basis based on the offeror's understanding of the work statement and adherence to manufacturer specifications. Past performance is also assessed as acceptable or unacceptable, with neutral ratings granted to those without relevant experience. Quotations must be all-inclusive and submitted electronically, as the government intends to make an award without further discussions.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Maritime Contract Program ManagementThe Maritime Contract Program Management subcontract, issued by the Department of Homeland Security's Sflc Procurement Branch 2, provides administrative and managerial oversight for prime contractors on US Coast Guard sustainment contracts. Based in Seattle, the role involves managing personnel substitutions, coordinating security training, and developing operational security plans. The contractor is responsible for tracking monthly electronic trouble logs and ensuring strict compliance with NISPOM and FAR 52-240-92. A Secret Facility Clearance is required to perform this work. Key deliverables include the submission of monthly trouble logs and comprehensive operational security plans. This opportunity falls under NAICS code 541611 and has a response deadline of October 5, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS