Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Piping & Mechanical Installation Contractor

Active

Federal

Response Deadline10/06/2027, 04:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Homeland Security involves the shipboard installation of the DFT, feedwater treatment systems, and associated piping for the USCG USCGC HEALY SLEP projects in Seattle. The contractor is responsible for installing equipment on foundations according to Coast Guard drawings, performing pipe cleaning, flushing, and testing, and welding copper-nickel and bronze piping. All work must adhere to SFLC Std Spec 6310 and MIL-STD-777 standards to deliver a fully installed and tested boiler feedwater piping and tank system. The opportunity is managed by the Sflc Procurement Branch 2 under NAICS code 336611. The solicitation was posted on September 18, 2026, with a response deadline of October 6, 2027.

General Info

DHS subcontract for installing feedwater systems and piping on USCGC HEALY in Seattle.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

336611 - Ship Building and Repairing

Place of Performance

Seattle, WA, 98134, USA

Set-Aside

NONE

Documents

This scope was carved out of HEALY-SLEP-Industry-Day.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HEALY-SLEP Industry Day - Deaerating Feed Tank (DFT), PLC-Based Steering Control System Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 18

subcontract

Response DeadlineOct 6

Submission deadline

Response Deadline

10/06/2027, 04:59:00 PM UTCin 11 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs shipboard installation of the DFT, feedwater treatment systems, and associated piping for prime contractors on USCG USCGC HEALY SLEP projects. Installs equipment on foundations per CG Drawings, performs pipe cleaning, flushing, and testing, and welds copper-nickel and bronze piping. Utilizes SFLC Std Spec 6310 and MIL-STD-777 standards. Delivers a fully installed and tested boiler feedwater piping and tank system.

Similar Contracts

Same NAICS industry code

Marine Engine and Gear SpecialistThis small business set-aside subcontract, managed by the Department of Homeland Security for the USCG Surface Force Logistics Center, requires a Marine Engine and Gear Specialist to perform critical maintenance on main diesel engines and reduction gears. The selected contractor will be responsible for inspections and adjustments according to work item D-009, utilizing precision alignment and diagnostic equipment to ensure propulsion systems are properly adjusted and certified. The work will be performed in Panama City, Florida, under NAICS code 336611. To be eligible, contractors must hold OEM certification for the specific engine models involved and are required to deliver certified inspection reports upon completion. The response deadline for this opportunity is November 12, 2026.

POSTED

about 11 hours ago

DEADLINE

Solicitation # 2127407B3000HE003

POSTED

about 11 hours ago

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement falls under NAICS code 336611, which pertains to the manufacturing of marine vessels and boats. The opportunity was posted on November 3, 2026, with a response deadline set for November 9, 2026. The contracting office is located in Philadelphia, Pennsylvania. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries. Detailed specifications and submission requirements can be accessed via the provided government portals.

Nswc Philadelphia Division

POSTED

about 11 hours ago

DEADLINE

Propulsor Device Machining

Solicitation # N0016727Q1004

The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting a firm fixed price contract for propulsor device part machining under solicitation N0016727Q1004. This requirement is a total small business set-aside under NAICS code 339999, with a business size limit of 550 employees. The scope of work involves the production of various components, including SIL top, bottom caps, and body tubes in quantities of 675 each, as well as R4 top caps, body tubes, bottom caps, shim rings, and center masses in quantities of 160 each. The period of performance extends from the date of award through July 18, 2027, with deliveries split between NSWC Carderock in Bethesda, Maryland, and the Portsmouth Naval Shipyard in Kittery, Maine. Award will be granted to the responsible quoter providing the lowest evaluated price among technically acceptable submissions, with technical acceptability determined on a pass/fail basis and past performance considered via the Supplier Performance Risk System (SPRS). Contractors must maintain a Quality Management System compliant with ANSI/ASQ/ISO 9001:2015 and adhere to strict packaging, cleaning, and marking standards, including MIL-STD-130 for item unique identification and MIL-STD-129 for shipment marking. Quote packages must include a cover sheet with the company name, point of contact, and CAGE code. Inquiries and specification drawing requests should be directed to Michael Bonaiuto, with a final quote submission deadline of November 12, 2026, at 12:00 PM Noon.

POSTED

about 11 hours ago

DEADLINE

Solicitation # 2127407B3000CF002

Solicitation 2127407B3000CF002 is a combined synopsis and request for quotation issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of 100 pneumatic tire wheel assemblies. The required items are OEM parts from eTrailer Corporation, identified by part number LHAW124 and NSN 2530-01-707-0512, intended for use on 27 foot SPC. This procurement is 100 percent set aside for small businesses under NAICS code 336611. The government intends to award a firm fixed price contract on an all-or-none basis to the responsible offeror providing the lowest cost technically acceptable quote that meets the required delivery date. Quotations must be submitted by 12:00 p.m. Eastern Standard Time on November 13, 2026, and must include the company's mailing address, remittance address, cage code, SAM Unique Entity ID, and Taxpayer Identification Number. Delivery is required by December 18, 2026, to the USCG Yard in Baltimore, Maryland, with pricing quoted as FOB Destination. Evaluation factors include delivery, pricing, and relevant past performance, with delivery weighted as heavily as cost. Offerors must be registered in the System for Award Management and provide completed representations and certifications in accordance with FAR 52.212-3.

POSTED

about 11 hours ago

DEADLINE

USS OKANE (DDG-77); 7MRB0604 Standalone

Solicitation # N5523627R0007

The Southwest Regional Maintenance Center is conducting market research via a Sources Sought announcement to identify capable small business concerns within San Diego County for the preservation, hull, mechanical, and electrical/electronic repairs of a Willard 7 Meter Rigid Inflatable Boat (RIB) and its associated trailer for the USS OKANE (DDG-77). The contemplated period of performance is from January 25, 2027, to October 27, 2027, with a final delivery deadline of October 22, 2027. Work must be performed at a contractor facility located within 50 miles of 32nd Street Naval Base San Diego. The scope of work includes comprehensive surface preservation following NSTM Chapter 631 standards, repairs to the Cummins Model QSB 5.9Lm diesel engine and Mercury Bravo 2 Outdrive, and the procurement and installation of steering components, fuel system replacements, and electrical upgrades. Key deliverables include a new boat alteration placard, a series of waterborne trials to verify system functionality, and a written QA inspection report. The government will evaluate respondents based on their technical capabilities, past performance on similar repairs, and their ability to perform at least 51 percent of the work in-house. Interested vendors must submit a capabilities statement no later than October 20, 2026.

Southwest Regional Maintenance Center

POSTED

about 11 hours ago

DEADLINE

NextGen Submarine Rescue System (SRS) Post-Industry Day Informational Packet and RFI

Solicitation # N00024-27-R-6116

Navsea HQ, specifically PMS 390 Undersea Special Mission Systems Submarine Rescue, is conducting market research via solicitation N00024-27-R-6116 to inform the acquisition of two Next Generation Submarine Rescue Systems (SRS). These systems are intended to replace the legacy Submarine Rescue Diving and Recompression System (SRDRS) by leveraging modified commercial off-the-shelf deep-submergence and marine diving technology. The program is structured into a design phase and a build phase, with a goal of maturing a design to a Critical Design Review baseline within 24 months. Key performance parameters include aircraft transportability and Time To First Rescue. The government is currently evaluating various acquisition strategies, including Other Transaction Authority and FAR-based contracts, with a formal solicitation expected in Q2 or Q3 of FY27 and a tentative award in Q4FY27. Future plans include a FAR-based production contract for three to four operational fleet systems and sustainment services estimated for FY2033. Interested parties must address statutory participation requirements for Nontraditional Defense Contractors or small businesses, or demonstrate the financial capacity for a mandatory one-third cost-share. The government emphasizes an open architecture approach to prevent proprietary restrictions on system integration and sustainment. Responses to this RFI are due by November 16, 2026.

POSTED

about 11 hours ago

DEADLINE

USCG STA PANAMA CITY (45633) FY27 DRYDOCK REPAIRS

Solicitation # 70Z0U0327SSBPL8678

The U.S. Coast Guard Surface Force Logistics Center has issued a Sources Sought Notice and Request for Information under solicitation number 70Z0U0327SSBPL8678 to conduct market research for FY27 dry-dock repairs for the USCG STA PANAMA CITY (45633). This effort is intended as a total Small Business Set Aside under NAICS code 336611. The government is seeking to identify capable prime contractors who can provide the necessary facilities, materials, equipment, and personnel to perform comprehensive repairs at the contractor's own dry dock facility. Key work items include general welding, ultrasonic testing, hull plating and fendering system inspections, diesel fuel tank cleaning, and the removal and installation of engines, as well as preservation of the water jet drive and underwater body. Interested parties must be registered in the System for Award Management and are requested to provide business size certification, past performance evidence for similar projects, and a statement confirming their intent to submit a proposal as a prime contractor. Future award considerations will be based on economic factors and geographical and transit considerations, including overall distance, fuel stops, and berthing services, while adhering to geographical restrictions defined in LANTAREAINST 3100.1G. This notice is for market research purposes only, and no formal solicitation currently exists.

POSTED

about 11 hours ago

DEADLINE

USCGC HAMMER (WLIC 75302) USCG 68A BARGE (68014) DRYDOCK REPAIRS FY2027

Solicitation # 70ZU0127QPBPL0001

Solicitation 70ZU0127QPBPL0001 is a Request for Quotations issued by the Department of Homeland Security, Coast Guard, for the Fiscal Year 2027 drydock repairs of the USCGC HAMMER (WLIC 75302) and the USCG 68A Barge (68014). This is a Total Small Business Set-Aside under a Firm Fixed Price contract with a proposed period of performance from January 6, 2027, to March 17, 2027, contingent upon Congressional Appropriation. The contractor must provide a facility accessible from a navigable waterway in Jacksonville, Florida, capable of supporting the safe arrival and departure of the vessels. The scope of work encompasses comprehensive maintenance, preservation, and repair services, including hull plating renewal, ultrasonic side scan testing, propulsion shafting overhaul, tank preservation, and the renewal of sea valves and strainers. Specific requirements include the provision of an independent Level 3 NACE Inspector and adherence to SFLC Standard Specifications for welding, drydocking, and preservation. Award will be based on the most advantageous offer, evaluating technical capability, project planning, experience with DoD and USCG surface vessels, and price. Quotations are due by November 9, 2026, and must include a cover letter, price schedule, and documentation of past performance and technical capability.

POSTED

about 11 hours ago

DEADLINE

CYLINDER ASSEMBLY

Solicitation # 2127407B3000AE001

Solicitation 2127407B3000AE001 is a combined synopsis and request for quotation issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of OEM Hamilton Jet parts. This is a brand name sole source procurement, 100% set aside for small businesses under NAICS code 336611. The government intends to award a firm fixed price contract on an all-or-none basis to the responsible offeror providing the lowest cost technically acceptable quote that meets the required delivery date. Evaluation factors include pricing, delivery, and relevant past performance, with delivery being considered as critical as cost. The requirement consists of two items: ten Cylinder Assemblies, Actuating, LI (NSN 3040-99-724-3832, P/N 112080) and 100 Bushing Sleeves (NSN 3120-01-703-0819, P/N 111464). All parts must be genuine OEM Hamilton Jet components, as no technical data or manufacturing drawings will be provided. The required delivery date for both items is January 15, 2027, with delivery to the USCG Yard in Baltimore, Maryland, quoted FOB Destination. Quotations are due by 12:00 PM EST on November 13, 2026, and must include the company's SAM Unique Entity ID, Taxpayer Identification Number, and completed representations and certifications.

POSTED

about 11 hours ago

DEADLINE

Refurbish and Repair Equipment Barge #774 - La Crescent, MN (UMRM 702.5)

Solicitation # W912ES27QA015

The U.S. Army Corps of Engineers, St. Paul District, is soliciting a firm fixed price contract for the transport, inspection, refurbishment, and modification of Equipment Barge 774, a 110 ft x 26 ft x 5 ft steel vessel. The selected contractor must pick up the barge from Lock and Dam 7 in La Crescent, Minnesota, after November 30 and transport it to a shipyard equipped with a drydock. The scope of work includes pressure blasting the hull, conducting comprehensive visual and non-destructive inspections, replacing timber decking, repositioning spuds and installing new spud wells, relocating winches, replacing wire rope, and re-routing 480-volt three-phase power. Additionally, the contractor must extend or replace 30 ft spuds with 40 ft spuds and paint the hull. All electrical work must comply with 46 CFR, IEEE 45, and NEC Article 430 standards, with weather-deck equipment meeting NEMA 4X or IP66 ratings. The completed barge must be returned to Lock and Dam 7 by April 1, 2027. This solicitation is a 100 percent set-aside for small businesses, specifically targeting Women-Owned Small Businesses and Service-Disabled Women-Owned Small Businesses under NAICS 336611. Offerors must be registered in the System for Award Management and submit quotes through the PIEE module by November 12, 2026. Evaluation will be based on price, technical rating, and past performance, and the government may accept offers other than the lowest price. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific requirements for vessel access, liability, and cybersecurity. Invoicing will be handled outside of the Wide Area Workflow system.

W07V Endist St Paul

POSTED

about 11 hours ago

DEADLINE

7th Fleet Welder Qualification and Sustained Capability Program

Solicitation # SSP27-D001

The Department of the Navy, through NAVSUP Fleet Logistics Center Yokosuka, is conducting market research via a Request for Information and Sources Sought notice for the 7th Fleet Welder Qualification and Sustained Capability Program. The objective is to identify qualified commercial ship repair facilities within the 7th Fleet Area of Responsibility, excluding Hawaii, to fill a capability gap in welding for ship repair and maintenance. The government intends to utilize FAR Part 12 for the acquisition of commercial products and services, likely awarding Firm-Fixed-Price contracts based on technical merit, corporate experience in naval ship repair, and price reasonableness. The program is structured into two phases: a Base CLIN for the qualification phase and a conceptual Option CLIN for the execution of on-call warship structural voyage repairs. The qualification phase is strictly limited to Shielded Metal Arc Welding (SMAW) of carbon steel for plates 1/8 inch to 1-1/2 inch thick, adhering to AWS-NAVSEA B2.1-1-302:2015 and Local Work Template (LWT) 042-001. Contractors must provide commercially qualified all-position SMAW welders and certified NDT personnel for Visual, Radiographic, and Magnetic Particle inspections. Eligible facilities must hold an active Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR). Interested sources must submit a company profile and rough-order-of-magnitude cost estimates by November 15, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

Honolulu Dockside Delivery and Offloading Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 11 hours ago

DEADLINE

Mobil DTE 10 Excel 100 Hydraulic Oil Supplier

Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

about 11 hours ago

DEADLINE

USCGC Midgett - Mobil DTE 10 Excel 100

Solicitation # 11708PR270000013

Solicitation 11708PR270000013 is a combined synopsis and solicitation for the U.S. Coast Guard to procure twelve 55-gallon drums of Mobil DTE 10 Excel 100 hydraulic oil, totaling 660 gallons. This is a brand-name requirement, and substitutes are not accepted. The contract is a single firm-fixed-price purchase order for commercial supplies, with the award intended for the responsible quoter who provides a technically acceptable quotation meeting the delivery requirements at the lowest total evaluated price. The requirement includes dockside delivery and offloading to a designated receiving point in Honolulu, Hawaii, via vendor truck. This opportunity is issued as a Total Small Business Set-Aside under NAICS code 424720, Petroleum and Petroleum Products Merchant Wholesalers. Eligible quoters must be registered in the System for Award Management and maintain a size standard of 500 employees. Quotations must include detailed pricing, manufacturer identification, a current Safety Data Sheet, and a validity period of at least 30 calendar days. Submissions are due electronically to Jamarius Butler by November 5, 2026, at 10:00 AM Hawaii Standard Time. The procurement is governed by FAR Part 12 and FAR Part 13, incorporating various standard clauses regarding commercial items, small business preferences, and Buy American requirements.

Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

about 11 hours ago

DEADLINE

Marine Engineering & Technical Documentation ConsultantThis subcontract for Marine Engineering and Technical Documentation Consulting supports the USCG USCGC HEALY SLEP projects through the Department of Homeland Security. The selected consultant will be responsible for integrated system design, drafting, and the creation of provisioning data requirements for prime contractors. Key deliverables include System Arrangement and Detail drawings, system schematics, Material Lists with NSNs, the Integrated Master Schedule, and Provisioning Technical Data, all developed using CAD software in accordance with USCG and MIL-STD standards. The project is categorized under NAICS code 541330 and is managed by the Sflc Procurement Branch 2. Performance of the contract will take place in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

Engineering Services

POSTED

about 2 months ago

DEADLINE

Marine Electrical Cable & Wiring SubcontractorThis subcontract involves the supply and installation of electrical cabling for DFT and Steering Control systems on USCG USCGC HEALY SLEP projects. The scope of work includes routing marine-grade cabling through ducts and raceways, terminating cables at consoles and cabinets, and delivering fully installed and tested wiring harnesses. All work must be performed in accordance with SFLC Std Spec 3041 and 3042, as well as MIL-STD-1399-300-1. Managed by the Department of Homeland Security through the SFLC Procurement Branch 2, the project is located in Seattle, Washington. The contract falls under NAICS code 238210, with a response deadline set for October 6, 2027.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 months ago

DEADLINE

Steering Control System Specialist (COTS PLC)This subcontract opportunity with the Department of Homeland Security's Sflc Procurement Branch 2 involves the replacement of existing steering control systems with COTS PLC-based designs for the USCGC HEALY SLEP projects. The selected specialist will be responsible for interfacing new PLC systems with existing electro-hydraulic steering gear and navigation systems, configuring communication protocols, and ensuring full adherence to COTS standards and USCG navigation interface requirements to deliver a fully operational steering control system. The project is based in Seattle, Washington, under NAICS code 334511. Interested parties must submit their responses by October 6, 2027.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 months ago

DEADLINE

Boiler Control Systems & PLC IntegratorThis subcontract opportunity with the Department of Homeland Security involves the replacement of obsolete boiler PLCs and burner sequencing controls for prime contractors working on USCG USCGC HEALY SLEP projects. The selected integrator will be responsible for designing and installing PLC-based controls, programming burner sequencing, and conducting initial light-off and burner adjustments. All work must be performed using a combustion analyzer in strict accordance with MIL-STD-1399-300-1 and USCG Tech Pub S9517-AY-MMC-010 to ensure a fully operational control system. The project is based in Seattle, Washington, under NAICS code 332410. Managed by Sflc Procurement Branch 2, the contract requires the delivery of a functional boiler PLC and burner sequencing control system. Interested parties must submit their responses by the deadline of October 6, 2027.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 2 months ago

DEADLINE

Deaerating Feed Tank (DFT) & Feedwater Treatment System ManufacturerThis subcontract through the Department of Homeland Security involves the design, manufacture, and delivery of one Deaerating Feed Tank and NSTM 220 V2 compliant feedwater treatment systems for the USCG USCGC HEALY SLEP projects. The manufacturer must utilize MIL-C-15726 Copper-Nickel Alloy and MIL-B-24480 Bronze/Nickel-Aluminum materials and maintain ANSI/ASQ 9001:2015 certification. The project is managed by the Sflc Procurement Branch 2 and requires delivery of the equipment to the installation site in Seattle, Washington. The response deadline for this opportunity is October 6, 2027.

Pump and Pumping Equipment Manufacturing

POSTED

about 2 months ago

DEADLINE

Military-Grade Radar Component Packaging & PreservationThis subcontract opportunity with the Department of Homeland Security's SFLC Procurement Branch 2 involves providing specialized preservation, packaging, and marking services for sensitive electronic radar equipment. The selected provider will support prime contractors on USCG Surface Forces Logistics Center projects by applying corrosion prevention materials, implementing ESD protection for electronics, and securing components in military-spec crates. All packages must be marked according to government specifications using industrial equipment to ensure components are ready for transport. The project is based in Baltimore and falls under NAICS code 488410. Interested parties must submit their responses by the deadline of December 1, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

Radar Pedestal Mechanical Repair & OverhaulThis subcontract, managed by the Department of Homeland Security's SFLC Procurement Branch 2, involves the mechanical overhaul and repair of radar pedestal assemblies, specifically part number 54.2424.600.00 and NSN 5985-01-676-8432. The scope of work includes mechanical disassembly, cleaning, part replacement, and the testing of rotation and stability using precision alignment and heavy mechanical tooling. All services must comply with USCG SFLC repair and preservation standards to ensure the delivery of certified overhauled pedestals for prime contractors on USCG Surface Forces Logistics Center projects. The project is categorized under NAICS code 811210 and will be performed in Baltimore. The solicitation was posted on August 24, 2026, with a response deadline of December 1, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

AN/SPS-75 Radar Electronic Component RepairThis subcontract involves the overhaul and repair of AN/SPS-75 radar electronic components for prime contractors supporting the USCG Surface Forces Logistics Center. The scope of work includes the disassembly, inspection, and diagnostic troubleshooting of power supplies, circuit card assemblies, and RF/IF units. All work must be performed using specialized RF/IF test equipment and circuit board diagnostic tools in strict accordance with OEM standards and proprietary technical data to ensure the delivery of fully repaired and tested components. The project is managed by the Department of Homeland Security under the Sflc Procurement Branch 2 and is categorized under NAICS code 334290. Performance of the contract will take place in Baltimore. The solicitation was posted on August 24, 2026, with a response deadline of December 1, 2026.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

TRS-3D /AN/SPS-75 Radar repairs/ overhaul services

Solicitation # 70Z08526RRJ001B00

The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Marine Piping & Fluid Systems Installation

National Oceanic And Atmospheric Administration

POSTED

about 2 months ago

CLOSED

about 1 month ago

HSC-L Major Equipment and Propulsion Systems Supplier

Hq Contract Operations (CG-912)(000

POSTED

about 2 months ago

CLOSED

KG-204 Repair and Rework Services

POSTED

about 2 months ago

CLOSED

about 1 month ago

Marine Propulsion and Shafting Services

Sflc Procurement Branch 3(00040)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Water Mist Fire Suppression System

Solicitation # 140802-26-0616

National Oceanic And Atmospheric Administration

POSTED

about 2 months ago

CLOSED

about 1 month ago

Dry-Dock: USCG STA CAPE MAY (45665) FY27 UWB

Solicitation # 7040Z04026SSBPL8141

Sflc Procurement Branch 3(00040)

POSTED

about 2 months ago

CLOSED

about 1 month ago

USCGC Sea Horse Dockside FY2027

Solicitation # 70Z08027PBPLSEAHORSE

Sflc Procurement Branch 1(00080)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Mercury Marine OEM Parts

Solicitation # 70Z04026Q51409B00

Sflc Procurement Branch 3(00040)

POSTED

about 2 months ago

CLOSED

about 1 month ago

J--FWS ARD FISHERIES M/V BAIRD GEARBOX REPAIRS

Solicitation # 0044058670

POSTED

about 2 months ago

DEADLINE

CHART SET, VISION ACUIT

Solicitation # SPE2DS-26-T-449W

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 months ago

CLOSED

about 1 month ago

Supplemental/Unscheduled Ship Repair Services

POSTED

about 2 months ago

CLOSED

about 1 month ago

Ship Repair Specialty Trades (Category A)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS