Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CATHETER, CHOLANGIOG

Active
SPE2DS-26-T-311RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Kumar Catheter is a specialized medical device designed for laparoscopic cholangiography, featuring a 76 cm translucent tubing with a 16-gauge diameter and a 19-gauge, 1.25 cm needle at the terminus for precise puncture of Hartmann’s pouch in the gallbladder to enable biliary access or aspiration. The device is constructed to be used in conjunction with the Kumar Cholangiography Clamp and is explicitly latex-free, ensuring compatibility with patients who have latex sensitivities. It is supplied in a unit of issue consisting of twenty units per box, with the NSN 6515-01-729-6451 and a single box requested under purchase request number 7017746628. Delivery is required within 20 days after order placement. This procurement is governed by Federal acquisition regulations under solicitation SPE2DS-26-T-311R, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. Technical and quality specifications referenced in the document are defined by the DLA Master List of Technical and Quality Requirements, with compliance based on the version in effect as of the solicitation or award date. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. The contract is set to expire with bids due by August 11, 2026, with performance to take place at Fort Hood, Texas. Primary point of contact for inquiries is Michael Small, reachable via email and phone provided. Bidders are required to clearly specify their source and part number in response.

General Info

Latex-free Kumar Catheter for cholangiography, 20 units per box, delivery in 20 days, Fort Hood, Texas, bid due August 11, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

BLDG 36065, FORT HOOD, TX, 76544, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-311R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Michael Small
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CATHETER,CHOLANGIOG
CATHETER,CHOLANGIOGRAPHY
THE KUMAR CATHETER , USED IN CONJUNCTION WITH KUMAR
CHOLANGIOGRAPHY CLAMP, IS MEANT TO PROVIDE A MEANS OF
LAPAROSCOPIC CHOLANGIOGRAPHY. IT COMPRISES A TRANSLUCENT
TUBING ( 76 CM. LENGTH AND 16 GA. ) THAT CARRIES A 19
GA., 1.25 CM LONG NEEDLE AT THE END. THE KUMAR CATHETER
IS USED TO PUNCTURE THE HARTMANN'S POUCH OF THE
GALLBLADDER FOR BILIARY ACCESS AND / OR ASPIRATION.
PRODUCT IS LATEX FREE.
UNIT OF ISSUE: BX/20 EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-729-6451 Quantity: 1 BX Purchase Request: 7017746628QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
Disposable Tracheal Tube Stylets SupplyThe contract is for the supply of sterile, disposable tracheal tube stylets constructed with aluminum and PVC coating, specifically designed to fit endotracheal tubes with an inner diameter ranging from 7.5 mm to 10 mm for use in airway management procedures. These stylets are intended for single-use in clinical settings and must meet strict sterility and performance standards to ensure safe and reliable intubation. The procurement is issued as a subcontract under the NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector. The offering is part of the Department of Defense’s Medical Supply Chain initiative, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance required at Fort Stewart, Georgia, under the zip code 31314-5185. Responses to this solicitation must be submitted by August 11, 2026, with the request published on August 5, 2026, through the DIBBS platform. There is no set-aside classification specified, meaning the opportunity is open to all qualifying contractors without restrictions based on business size or ownership type. While no specific point of contact is listed, interested parties are directed to the public DIBBS link for full documentation and submission instructions. The stylets must conform to all applicable regulatory and technical specifications for medical devices, including sterility, biocompatibility, and mechanical integrity, to ensure compatibility with standard endotracheal tubes used in military and civilian healthcare environments.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Additive Manufacturing Cartridge SupplyThe contract involves the supply of a commercial off-the-shelf additive manufacturing cartridge with National Stock Number 7045016631026 and part number 355-03110, specifically designed for use with Stratasys 3D printers. The product must fully comply with Department of Defense technical and quality standards as mandated by the Defense Logistics Agency. Performance of the contract is required at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and the work falls under NAICS code 339112, which classifies it within the additive manufacturing and related equipment manufacturing sector. This is a subcontract opportunity issued under the Department of Defense, through the Construction & Equipment T & IFO EQ office, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. All bidders are expected to meet defense-specific requirements for delivery, quality assurance, and traceability without deviation from the specified technical parameters.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339112
New
DIBBS
Supply of Lens Cleaning DisksThe contract pertains to the procurement and delivery of six units of Lens Cleaning Disk, identified by National Stock Number 7035016138030, sourced as a commercial off-the-shelf item. The requirement mandates full compliance with established packaging and marking standards to ensure proper handling and identification upon receipt. The solicitation, titled Supply of Lens Cleaning Disks, was posted on August 5, 2026, with responses due by August 17, 2026, and is structured as a subcontract under the NAICS code 339112, which corresponds to other miscellaneous manufacturing. The performance location is specified as New Cumberland, Pennsylvania, with a Zip code of 17070-5002, and the contracting activity falls under the Department of Defense, specifically the Construction & Equipment MRO SVC I organization. No set-aside provisions are designated for this opportunity, and the procurement is managed through the DLA DIBBS system with a public link for submission details.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339112
New
DIBBS
SPECULUM, VAGINAL
Solicitation # SPE2DS-26-T-314J
The contract specifies the procurement of a medium-sized, sterile, disposable vaginal speculum made of clear plastic with integrated LED illumination, ratcheting mechanism, and battery operation, supplied in boxes of ten units. It is identified by the NSN 6515-01-725-1388 and requires strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA requirements, and all non-accepted supplies must have government identification removed prior to return. The solicitation, issued under number SPE2DS-26-T-314J, was posted on August 5, 2026, with responses due by August 11, 2026, and demands delivery within 20 days of award. The procuring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at FPO, ZIP 96673. Bidders must clearly state the source and part number being offered, and all communications should be directed to Brooke Webb at the provided contact details.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, IRRIGATING
Solicitation # SPE2DS-26-T-311K
The item is a 60 cc irrigating syringe with dual graduations—marked in 5 cc increments up to 60 cc and in 1/4 oz increments up to 2 oz—featuring a catheter tip designed for surgical use in operating room procedures. It is autoclavable and supplied in hard pack, ensuring sterility and durability under repeated sterilization. Each unit must be individually sealed in a protected container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe transportation via common carriers at the lowest cost to the specified delivery point, which is Point Mugu, CA, 93042-0001. The packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and full compliance documentation is accessible through DLA Troop Support. The unit of issue is a package of 100 syringes, and the item carries a non-extendable 24-month shelf life as a Type I (Code M) item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The item is covered under Defense Information regulations and must be supplied with accurate source and part number information. The contract is issued under solicitation SPE2DS-26-T-311K with a bid deadline of August 11, 2026, and a delivery requirement of 20 days after order placement.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEOSTOMY
Solicitation # SPE2DS-26-T-311B
The contract specifies the procurement of two Shiley Adult Flexible Tracheotomy Tubes with TaperGuard Cuff, each featuring a single cannula design, an inside diameter of 7.5 mm, an outside diameter of 10.8 mm, and an inner cannula inside diameter of 6.5 mm, with a cuff resting diameter of 25.4 mm. These are disposable, sterile, and must meet stringent shelf life requirements, including a maximum of 72 months from manufacture to expiration and no more than 10 months elapsed from manufacture to delivery to the government. The tubes are identified by NSN 6515-01-735-1484 and must be sourced with the exact part number, as specified in the solicitation. Packaging and delivery must comply with DLA Packaging Requirements, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE2DS-26-T-311B, with bids due by August 11, 2026, and delivery required within five days of award to the designated performance location at JBER, Alaska, 99506-4400. The primary point of contact is Brooke Webb from the Department of Defense’s Medical Supply Chain, and all submissions must remove any government identification from non-accepted supplies as per RQ011 requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
ANALYZER, GAS FLOW
Solicitation # SPE2DS-26-T-313X
The gas flow analyzer is a sophisticated medical device designed to measure bidirectional air flow, high and differential low pressure, barometric pressure, oxygen concentration, airway pressure, airway temperature, and airway humidity, with specialized capabilities for testing mechanical patient ventilators. It supports external control via USB commands and can be fully automated using compatible software, enabling precise and efficient performance validation in clinical or laboratory environments. The unit operates on a rechargeable lithium-ion battery or an external power supply, making it suitable for both portable and stationary use. The VT900A MIL KIT includes the analyzer, a portable test lung, vapor and Pelican cases for secure transport, ensuring durability and readiness in field or operational settings. The item is identified by NSN 6515-01-696-5253 with a unit of issue of each and is subject to DLA technical and quality requirements referenced by R and I numbers, which are governed by the DLA Master List of Technical and Quality Requirements. Packaging must comply with DLA procurement standards, and supplies must be free of government identification if not accepted. Bidders are required to clearly specify the source and part number being offered. The solicitation is managed under SPE2DS-26-T-313X, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with responses due by August 11, 2026, and delivery expected within 20 days of award to APO, ZIP 09094-3219. The primary point of contact is Vernon Stevenson, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
GLOVES, CHEMICAL PROTEC
Solicitation # SPE2DS-26-T-310R
The gloves are chemical protective, made of nitrile, and designed to be disposable, non-sterile, powder-free, latex-free, silicone-free, and antistatic with a chlorinated surface and smooth exterior. They feature a beaded cuff, are colored green, and measure 240 millimeters or 9.5 inches in length with a palm thickness of 0.12 millimeters or 4.7 mils and finger thickness of 0.16 millimeters or 6.2 mils. Each unit is packed in a box containing 100 gloves and must comply with DLA packaging and technical requirements as specified in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government identification must be removed from any non-accepted supplies. The item is identified by NSN 6515-01-693-8297 with a purchase request number of 7017739038, quantity of one box, and a delivery requirement of 20 days after award. The solicitation number is SPE2DS-26-T-310R, issued on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office located in San Antonio, Texas, with Aidan Martz as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TUBE, INHALER
Solicitation # SPE2DS-26-T-314F
The contract specifies the procurement of 7-foot oxygen tubing with a smooth bore interior and universal connectors on both ends, designed for compatibility with flowmeters regardless of whether a Christmas tree adapter is present. Each unit is sold in cases of 50, with the entire order consisting of one case. The item has a non-extendable shelf life of 36 months from the date of manufacture, and no more than seven months may have passed between manufacturing and delivery to the government. Labels must clearly display the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. The item is subject to DLA’s technical, quality, and packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the applicable revision in effect at the time of solicitation or award. The supply must adhere to government packaging standards and undergo proper identification removal procedures if rejected. The NSN is 6515-01-723-0250, with a delivery deadline of 20 days after order placement. Solicitation SPE2DS-26-T-314F was posted on August 5, 2026, with responses due by August 11, 2026, under the NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense's Medical Supply Chain organization.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
METER, FLOW RATE IND
Solicitation # SPE2DS-26-T-313D
The contract specifies the procurement of two flow rate indicating meters designed for anesthesia and respiratory gases, with a measurement range of 0 to 15 liters per minute and a hand-tight disconnect feature. Each unit must be shipped in a sealed container capable of protecting it from damage or breakage, and all packaging must comply with commercial standards as outlined in the procurement documentation. Shipments must be contained in appropriate exterior shipping containers that ensure safe and cost-effective delivery via common carrier to the designated point of performance in APO, with a delivery deadline of 20 days after award. All items must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and bidders must provide the source and part number being supplied. The national stock number is 6515-01-478-1185, and the solicitation number is SPE2DS-26-T-313D, with a response deadline of August 11, 2026. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information provisions apply. Packaging must adhere to DLA requirements, and non-accepted supplies must have government identification removed. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, and inquiries should be directed to Brooke Webb.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SENSOR, TEMPERATURE MON
Solicitation # SPE2DS-26-T-293T
The contract pertains to the procurement of disposable temperature monitoring sensors for adult patients, specified as single-patient-use pulse co-oximetry sensors packaged ten units per box. The item is identified by NSN 6515-01-725-3928 with a required quantity of two boxes, and delivery must be completed within twenty days of order placement. Technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements govern the product’s performance, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government markings must be removed from any non-accepted supplies. The solicitation is issued under SPE2DS-26-T-293T, with bids due by August 5, 2026, and responses must clearly identify the supplier and part number being offered. The procurement is managed by the Department of Defense’s Medical Supply Chain under the Hurlburt Field delivery location, with Patrick Esposito as the primary point of contact listed for inquiry.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339112
New
DIBBS
ADMINISTRATION SET, INF
Solicitation # SPE2DS-26-T-312S
The contract is for the procurement of 96 administration sets for infusion pumps designated for nitroglycerin use, each consisting of vented PVC tubing with a flow rate of 60 drops per milliliter, equipped with roller and slide clamps and a Y-type injection site located six inches from the luer lock adapter. The items are disposable, sterile, and packaged in units of 48 per package, with the total order quantity being two packages. The National Stock Number is 6515-01-446-3284, and the purchase request is identified as 7017749590. Delivery is required within 20 days of award. Technical and quality requirements referenced under RA001 are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA requirements, and non-accepted supplies must have all government identification removed as per RQ011. Bidders must clearly indicate the source and part number of the product being offered. The solicitation number is SPE2DS-26-T-312S, posted on August 5, 2026, with responses due by August 11, 2026. The National Industrial Classification Code is 339112, and the contracting authority is the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance location at Fort Campbell, ZIP 42223-5000. The primary point of contact is Seth Tootell, reachable via email and phone provided. The procurement is a federal solicitation with no set-aside designation, and bidders can access additional details through the official DIBBS platform link.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 493110
New
DIBBS
Shelf-Life Management and Inventory Control
General Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Palletization, and Bar-Coding Services
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Labeling and Compliance Services
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325193
New
DIBBS
Occlusive Chest Wound Seal Dressing Supply
Ethyl Alcohol Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332312
New
DIBBS
Structural Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
DIBBS
Heavy Haul and Equipment Transport
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Environmental Compliance and Remediation
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site Layout
Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 237310
New
DIBBS
Road and Highway Paving
Highway, Street, and Bridge Construction

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details