This Solicitation opportunity from Department Of Defense was posted on May 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CATHETER, INTRAVENOU
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the supply of intravenous polyurethane catheters that are 18 gauge by 1-1/4 inches in length, featuring a luer lock hub and round tip with an IntroScan safety design. The product is packaged in sealed units of 200 catheters per package, each with a required shelf life of 60 months, and deliveries must not exceed nine months from the manufacturing date. All packaging must comply with commercial standards to ensure protection during shipment and include clear markings of lot number, manufacture date, and expiration date. Compliance with FDA regulations and applicable Department of Defense technical and quality standards is mandatory, with the contract specifying that bidders must provide detailed product and manufacturer information. Delivery is scheduled within 20 days to Fort Bragg, with destination inspection and acceptance, and no variance in quantity allowed. The contract references specific packaging and marking standards to be used, superseding previous military standards, and highlights that commercial exterior containers must ensure safe delivery at the lowest carrier rate. The requirement is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, and communication points and relevant procurement documentation are accessible via the official DLA channels.
General Info
Agency
NAICS
Place of Performance
5234 EAGLE TALON DR BLDG X3063, FORT BRAGG, NC, 28310, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
CATHETER, INTRAVENOUS
POLYURETHANE, SAFETY<(>,<)> 18 GAGE BY 1-1/4
INCH, LUER LOCK HUB, ROUND TIP,
INTROSCAN SAFETY, 200S
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
UNIT OF ISSUE PACKAGE, PG, OF 200S
.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT
(CONTROL) NUMBER AND DATE OF MANUFACTURE PREFIXED
BY "MFD" AND EXPIRATION DATE PREFIXED BY "EXP".
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . BIDDER SHALL SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED .
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
SPE2DS-26-T-087M
SECTION B
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
TRILLAMED LLC 56FN2 P/N TM-4252560-02 B. BRAUN MEDICAL INC 11171 P/N 4252560-02
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016841146 0001 PG 1.000
NSN/MATERIAL:6515014884994
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6515-01-488-4994 Quantity: 1 PG Purchase Request: 7016841146QTY: 1 Delivery: 20 days ADO