Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Cathodic Protection Rehabilitation on Aufdenkamp Pipeline (ATM-3)

Forecast

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Cathodic Protection Rehabilitation on Aufdenkamp Pipeline (ATM-3) project, managed by the Santa Margarita Water District, involves critical infrastructure improvements to water transmission mains in Mission Viejo, California. The scope of work includes the replacement of an existing cathodic protection rectifier and enclosure, as well as the installation of a new retaining wall on the slope behind the sidewalk. The project is located on the south side of Alicia Parkway, approximately 295 feet east of the Alicia Parkway and Po Avenue intersection. This project is classified as a forecast under NAICS code 237120 and is categorically exempt under Class 1 Existing Facilities pursuant to Section 15301 of the California Environmental Quality Act (CEQA) Guidelines. Administrative oversight is provided by Patricia A. Butler, who serves as the Chief Engineer and Special Projects Manager. The project was signed on July 14, 2026, to ensure the continued integrity and protection of the district's water transmission infrastructure.

General Info

Replace cathodic protection rectifier and enclosure, build retaining wall for Aufdenkamp Pipeline in Mission Viejo, CA.

Agency

California → Santa Margarita Water District

NAICS

237120 - Oil and Gas Pipeline and Related Structures Construction

Place of Performance

Alicia Pkwy and Po, Mission Viejo, CA, 92675

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseForecast

PostedJul 16

forecast

Prepare for this forecast

Research the agency, track this forecast, and prepare your capture plan before the solicitation opens.

Organization & Contact Information

Show more

AgencyCalifornia → Santa Margarita Water District

Contacts1 person available

OfficeN/A

Organization / Agency

California → Santa Margarita Water District

Office AddressN/A

Contacts

Patricia A. ButlerSpecial Projects Manager

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Replace existing cathodic protection rectifier and enclosure. Install new retaining wall on slope behind sidewalk. Replacements ensure proper cathodic protection for water transmission mains.

Similar Contracts

Same NAICS industry code

WH Ford RTC Fueling System Repairs, Kentucky

Solicitation # W9128F27RA054

Solicitation W9128F27RA054 is a Firm Fixed Price, Design-Build project for fueling system repairs at the W.H. Ford Regional Training Center in Greenville, Kentucky. The scope of work involves comprehensive mechanical, structural, and electrical upgrades, including upgrading tank automatic tank gauges, repairing dispenser and offload island concrete, installing emergency fuel shut-off systems, and mounting leak detector probes. Additional requirements include replacing canopy and fuel pipe coatings, installing concrete circulation pavement and splash blocks, replacing tank vents and roof penetration boot seals, providing deadman control for truck loading, and modifying tank access platforms and grounding systems. All work must adhere to UFC, NFPA, ASTM, and ADA/ABA standards, with specific identification requirements following MIL-STD-161H. The project has a performance period of 410 calendar days, with a final delivery date of June 18, 2027, and requires work to commence within 10 days of the Notice to Proceed. Proposals will be evaluated using the Lowest Price Technically Acceptable (LPTA) method, focusing on relevant experience, a detailed Gantt chart covering preconstruction, on-site construction, and post-construction phases, and a well-defined construction methodology. Submissions must be divided into a Technical Volume and a Price Volume. The contract mandates compliance with the Davis-Bacon Act for labor rates, strict cybersecurity protocols for contractor equipment, and the implementation of a three-phase quality control system.

Bristol Alliance of Companies

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Mather Fueling System Repairs

Solicitation # PANNWD26P028176

The Mather Fueling System Repairs project, solicitation W9128F27RA045, is a design-build effort located at the Mather Army Aviation Support Facility in California. Managed by the USACE Omaha District, this firm-fixed-price contract is restricted as a total small business set-aside. The scope of work involves comprehensive repairs to AVGAS fueling systems, including the installation of sampling gauge hatches, mechanical gauges, and an automatic tank gauge system. Key construction tasks include recoating the tank exterior, replacing collision barriers, adding a full-length catwalk, and replacing audible and visual alarms. Additionally, the project requires the demolition and replacement of the POL operation building, relocation of a generator with a new concrete pad, repair of remote containment basin drainage, and various asphalt and concrete pavement replacements. The procurement utilizes the Lowest Price Technically Acceptable (LPTA) source selection method, evaluating proposals based on project experience—requiring three examples of projects exceeding 1 million dollars—and a detailed project schedule. The projected period of performance is 365 days. Contractors must comply with the Davis-Bacon Act for prevailing wages and adhere to strict regulatory standards, including UFC 3-460, OSHA, EPA, and DOT requirements. Deliverables include design documents in English units, as-built drawings, and a multi-stage inspection process consisting of punch-out, pre-final, and final acceptance inspections. Performance and payment bonds are required within 10 days of award.

W071 Endist Omaha

POSTED

DEADLINE

Fuel Facilities Upgrades and Capacity Increase

Solicitation # EV9354

The Government of the Northwest Territories, through the Department of Infrastructure, is seeking submissions from qualified contractors for fuel facility upgrades and capacity increases in Sachs Harbour and Ulukhaktok. This solicitation, identified by number EV9354, focuses on critical infrastructure improvements within the Northwest Territories to enhance fuel storage and distribution capabilities. Interested parties must submit their responses by the deadline of November 26, 2026. The procurement process has included five separate addenda issued between October 15 and November 6, 2026, which provide essential updates to the project requirements. All inquiries and submissions should be directed to the designated Contract Administrator.

Government of the Northwest Territories

POSTED

DEADLINE

Hammerman Gas/Diesel Tank Replacement Gunpowder Falls State Park

Solicitation # BPM059366

This project, solicitation BPM059366, involves the removal and replacement of above-ground gasoline and diesel fuel storage systems at the Gunpowder Falls State Park Hammerman Area in Baltimore County, Maryland. The scope of work requires the contractor to provide all labor, equipment, and materials to remove existing tanks, dispensers, piping, electronic systems, concrete pads, and bollards. Key deliverables include the installation of new storage tanks, concrete pads, and side-mount dispensers, as well as the provision of temporary gasoline and diesel tanks with metered dispensers for the duration of the project. All work must adhere to strict safety and environmental standards, including NFPA 30, 30A, and 78, API standards 650 and 620, and Maryland Department of the Environment regulations, with backfill compacted to a minimum of 95 percent. The contract is a Small Business Reserve Procurement, limiting the award to certified small businesses. The basis of award is the lowest responsive and responsible total bid. Procurement goals include a 15.00% MBE and 2.0% VSBE participation rate, with liquidated damages applicable for failure to comply with MBE requirements. The state reserves the right to apply reciprocal preference for resident bidders. Final acceptance is contingent upon the approval of the Facility Manager and DNR Project Engineer, requiring the submission of an approved electrical inspection certificate, a disposal manifest for contaminated soils and equipment, and three sets of manufacturer manuals and as-built drawings. Invoices are to be submitted to the Maryland Department of Natural Resources in Annapolis, with payments typically issued within 30 days of receipt of a proper invoice.

POSTED

DEADLINE

in about 1 month

PSO CB 50110 FK - Tank Down-Fitting and Associated Mechanical Works at PSO IC Site, KRL, Islamabad Division

Solicitation # CB 50110 FK

The Pakistan State Oil Company Limited, Islamabad Divisional Office, is soliciting bids for solicitation number CB 50110 FK regarding tank down-fitting and associated mechanical works at the PSO IC Site, KRL, in the Islamabad Division. This procurement is conducted in accordance with PPRA Clause 32 (1)(b). The submission window for electronic bids via the SAP Ariba Portal runs from November 5, 2026, to November 12, 2026, with daily submission hours between 08:30 AM and 02:15 PM. Eligible bidders must demonstrate adequate past relevant experience and financial capability. Mandatory requirements include being an active taxpayer with valid NTN and GST/PST certificates, providing the CNIC of the owner or authorized representative, and certifying that the firm is not blacklisted by PSO or any other entity. Additionally, vendors must certify they have not been involved in any fatal accidents during project execution within the last five years. All requests for tender documents must be submitted through the SAP Ariba Portal with a signed and stamped request on official letterhead, and any conditional or partial proposals will be rejected.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

Publication - 100024987-26-33 - Dry Terrain - Coating Refurbishment Work on 20 KMs length of KMK Pipeline Sec III-IV

Solicitation # Doc343325638

Pak-Arab Refinery Limited has issued a sources-sought solicitation, identified by number Doc343325638, for coating refurbishment work on a 20 kilometer stretch of the KMK Pipeline Section III-IV. This project focuses on dry terrain maintenance and is located within Pakistan. The publication was posted on November 5, 2026, with a response deadline set for November 17, 2026. Interested parties can coordinate through the primary point of contact at [email hidden] or access further details via the provided Ariba portal link.

Pak-Arab Refinery Limited

POSTED

DEADLINE

Publication - 6000015179-26-32 - Water Logged - Coating Refurbishment Work on 10 KMs length of KMK Pipeline Sec II

Solicitation # Doc343322735

Pak-Arab Refinery Limited is seeking sources for coating refurbishment work on a 10 kilometer section of the KMK Pipeline Sec II in Pakistan. This sources-sought publication, identified by solicitation number Doc343322735, focuses on addressing water logged areas to ensure the integrity of the pipeline infrastructure. The solicitation was posted on November 5, 2026, with a response deadline set for November 17, 2026. Interested parties can coordinate through the primary point of contact at the provided agency email or access further details via the official Ariba portal link.

Pak-Arab Refinery Limited

POSTED

DEADLINE

WH Ford RTC Fueling System Repairs

Solicitation # W9128F27RA054

Solicitation W9128F27RA054 is a design-build, firm-fixed-price contract for fueling system repairs at the W.H. Ford Regional Training Center in Kentucky, managed by the US Army Corps of Engineers, Omaha District. This project is a total set-aside restricted to 100% small businesses under NAICS code 237120. The scope of work involves comprehensive upgrades to two 10,000-gallon above-ground storage tanks, including the installation of an emergency fuel shutoff station, leak detection equipment, and an upgraded automatic tank gauging system. Additional requirements include repairing concrete and pavement, recoating fuel system canopies and piping, replacing tank vents, and improving grounding systems and equipment access platforms. All work must adhere to EM 385-1-1 safety standards, as well as IBC, NFPA, and ADA accessibility guidelines. Proposals must be submitted electronically in two separate volumes: a technical volume covering specialized experience, a Gantt chart for the project schedule, and a technical approach, and a separate pricing volume. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process to award the contract. The proposal submission deadline has been extended to December 21, 2026, at 14:00 CST. Once awarded, the contractor must commence work within 10 days of the Notice to Proceed, with a final completion deadline of June 18, 2027. Compliance with the Davis-Bacon Act and Buy American requirements is mandatory.

W071 Endist Omaha

POSTED

DEADLINE

in about 1 month

726-6US-1330 - Leak Repair ProjectCaltrans District 7 has issued an encroachment permit to the Southern California Gas Company for a leak repair project located along State Route 150 at Rice Road in the City of Ojai, Ventura County. The scope of work involves excavation within the Caltrans right-of-way to repair and restore the affected area, which includes the implementation of necessary traffic control activities. The excavation is limited to a maximum depth of 48 inches, an average width of 24 inches, and a maximum length of 36 feet. This project will not require the relocation of any public utilities or the acquisition of new right-of-way. The initiative is managed by Caltrans in Los Angeles, with Mojgan Abbassi serving as the primary point of contact. The project is currently listed as a forecast with a posted date of November 4, 2026.

Caltrans, District 7 - Los Angeles

POSTED

DEADLINE

Raw Gas Pipeline Installation and OperationThis subcontract involves the design, installation, and operation of gathering lines and transmission pipelines for prime contractors purchasing raw gas from the Oil and Gas Development Company Limited in Rahimyar Khan, Pakistan. The scope of work encompasses comprehensive technical execution, including pipeline routing, trenching, welding, hydrostatic testing, and pipeline pigging, utilizing specialized pipeline spreads and welding rigs to deliver a fully commissioned and operational gas transmission system. All activities must strictly adhere to API standards and comply with the necessary energy regulatory permits required by Pakistani law. Interested parties should note that the response deadline for this opportunity is November 16, 2026, with the project falling under NAICS code 237120 for pipeline construction.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Natural Gas Pipeline Repair and Valve InstallationThis small business set-aside subcontract involves the repair and replacement of natural gas distribution piping and valves for prime contractors on Air Force projects at Offutt AFB. The scope of work includes repairing 6 inch HDPE lines, replacing 8 inch steel valves and flanges, and installing 2 inch isolation valves. Additionally, the contractor is responsible for performing line stops or pinching for isolation and installing necessary valve boxes and risers to deliver a fully pressure-tested gas distribution system. Technical compliance is critical, as the project requires certified welders and strict adherence to 49 CFR 192, API, ASME, and AGA standards. Managed under the Department of Defense, the opportunity falls under NAICS code 237120. Interested parties must submit responses by November 17, 2026.

FA4600 55 Cons Pkp

POSTED

DEADLINE

Gas Line Repair

Solicitation # GasLineRepair

The 55th Contracting Squadron at Offutt Air Force Base, Nebraska, is conducting a sources sought market survey to identify qualified contractors for the repair and replacement of gas distribution system components. The scope of work includes repairing gas leaks on 6 inch and 8 inch pipes and valves, as well as replacing components on 2 inch pipes and valves. Specific tasks involve repairing a 6 inch HDPE line near B479, replacing 8 inch valves and flanges near B73, and replacing a 2 inch isolation valve on the service line to B73. The project also requires the replacement or reconnection of cathodic protection and the installation of new valve boxes and risers marked for gas. The period of performance extends from the time of award until April 30, 2027. Due to base gas load requirements, the 8 inch valve replacement must be performed during warmer spring weather, specifically when temperatures show five consecutive days with lows above 40 degrees Fahrenheit and highs above 65 degrees Fahrenheit. All work must comply with 49 CFR 192, API, ASME, and American Gas Association standards, as well as ISO 9001 quality management processes. Contractors are required to provide welder certifications and perform pressure testing for at least one hour post-installation. This is a small business set-aside under NAICS code 237120. Interested parties must submit their capabilities package, including company information and socio-economic status, to the designated point of contact by 12:00 PM CST on November 17, 2026.

FA4600 55 Cons Pkp

POSTED

DEADLINE

Prepare for this forecast

Research this forecast and prepare for the solicitation

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS