Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CCTV System and Install Luke AFB

Active
FA488726Q0045Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled CCTV System and Install Luke AFB, solicited under FA488726Q0045, is a Small Business Set Aside opportunity issued by the Department of Defense through the Office of FA4887 56 Cons Cc located at Luke Air Force Base in Arizona. It requires the procurement and installation of a closed-circuit television system in strict compliance with the detailed salient characteristics and statement of work provided, ensuring the system meets all operational and technical standards for security and surveillance at the designated location. The solicitation was posted on July 30, 2026, with responses due by August 6, 2026, and is specifically reserved for small businesses as defined by the Small Business Administration. The primary point of contact for this opportunity is 2nd Lt Angelo Donisi, reachable via phone at 623-856-2732 or email at angelo.donisi.1@us.af.mil, with Jacqueline C. Aranda serving as the secondary contact. The system must be installed on-site at Luke AFB, Arizona, with a zip code of 85309, and the NAICS code 334220 specifies the industry classification related to security and surveillance systems. Interested parties are directed to the SAM.gov portal for full solicitation details and submission requirements, with all work expected to align with DoD security protocols and performance specifications outlined in the attached documentation.

General Info

Small business contract for CCTV system installation at Luke AFB, Arizona, due August 6, 2026.

Agency

Department Of Defense → FA4887 56 Cons CcView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

AZ, 85309, USA

Set-Aside

SBA

Documents

(6)

Statement_of_Work_CCTV_Installation.pdf

PDF

Solicitation+-+FA488726Q0045.pdf

PDF

Minimum+Salient+Characteristics+for+Warehouse-Storage+Lot+CCTV.pdf

PDF

WD+2015-5469+Rev+30+-+5.13.26+%281%29.pdf

PDF

Antiterrorism Pamphlet - Suspicious Activity and Force Protection

PDFpamphlet

Contractor+Access+to+Department+of+the+Air+Force+Installations.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4887 56 Cons Cc
Contacts2 people available
OfficeLUKE AFB, AZ, 85309-1217, USA
Organization / Agency
Department Of Defense → FA4887 56 Cons Cc
View Agency Profile
Office AddressLUKE AFB, AZ, 85309-1217, USA
Contacts
Jacqueline C. Aranda

Full Description

Show more

CCTV system and install in accordance with the attached salient characteristics and statement of work. 

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
ATTENUATOR ASSEMBLY
Solicitation # SPE7M5-26-T-362J
The contract is for the procurement of five attenuator assemblies identified by NSN 5985-01-602-2207 under solicitation SPE7M5-26-T-362J, with a delivery requirement of 169 days after award. The item is subject to stringent cybersecurity and export control regulations, as the contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified third-party assessment organization, and the technical data involved is controlled under either ITAR or EAR, requiring explicit authorization for any export or disclosure to foreign persons, including those within the United States. Access to this controlled technical data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have received formal approval from the Defense Logistics Agency. The contract also incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must meet DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The contracting office is part of the Department of Defense’s Active Devices Division, with performance located in Jacksonville, Florida, and inquiries directed to Matthew Stanko.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
Federal
Unify OpenScape Voice Console
Solicitation # W50S9926Q1104
The Tennessee Air National Guard at Memphis International Airport intends to award a sole-source, firm fixed-price contract to MCS of Tampa, Inc. for the replacement of its existing Unify Console System with a new Unify OpenScape Voice IP-based Command and Control Solution System Expansion. The work includes installation of necessary hardware, provision of parts, and ongoing support and maintenance services at the Memphis ANG Base located at 4593 Swinnea Rd., Memphis, TN 38118. MCS of Tampa, Inc. is identified as the exclusive distributor of Unify products and services, and the procurement will be conducted under FAR 6.302-1 and 13.106-1(b)(1) due to the necessity of maintaining compatibility with existing Unify infrastructure and the absence of other authorized distributors capable of fulfilling the requirement. The North American Industry Classification System code is 334220 with a small business size standard of 1,250 employees, and the solicitation is structured as a Small Business Set Aside with total set-aside intent. This notice is a sources-sought synopsis and not a formal solicitation; however, interested parties may submit responses by 4:00 p.m. CDT on August 11, 2026, via email to the designated Contracting Officer, Christopher Rhyne, at 164.AW.MSC.ORG@US.AF.MIL. Responses must not exceed five typewritten pages, include confirmation of SAM registration under NAICS 334220, and indicate socio-economic status and prime contractor intent, though they will not obligate the government to award a contract or provide feedback. No specific contract clauses, evaluation factors, payment details, or technical specifications beyond system compatibility and installation are provided, as this is a pre-solicitation market research effort; any formal solicitation may follow after review of submissions. The Government reserves the right to use non-proprietary information submitted and will not accept classified, confidential, or sensitive data. The contract will be administered from the Memphis ANG Base by the Department of Defense with no Contracting Officer’s Representative identified.
W7N1 Uspfo Activity Tnang 164

POSTED

about 20 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
Federal
eSports Stage Automation Equipment
Solicitation # PANMCC26P0000047018
The U.S. Army is seeking input from small businesses to determine if a small business set-aside is viable for the procurement and integration of turnkey eSports stage automation equipment at its main broadcast stage in Fort Knox, Kentucky. This notice is purely for market research and does not constitute a solicitation or commitment to award a contract. The requirement is targeted under NAICS code 334220, which covers manufacturing of broadcast and communications equipment, with a size standard of 1,250 employees. The Army encourages participation from all small business socioeconomic categories, including 8(a), HUBZone, Service-Disabled Veteran-Owned, Women-Owned Small Business, and Small Disadvantaged Business concerns, and emphasizes that a set-aside will only proceed if at least two qualified small businesses respond with sufficient information. Responses must be submitted via email to the designated Contract Specialist and Contracting Officer by August 14, 2026, and must include firm details, certifications, interest in prime or subcontracting roles, relevant past performance, commercial availability and pricing data, recommendations for structuring competition, and identification of any barriers to fair competition. Small businesses responding are required to provide comprehensive details on their capabilities, including previous experience with similar broadcast or eSports automation systems, certifications, pricing basis, delivery timelines, and warranty terms. While limitations on subcontracting do not apply to set-asides at or below the Simplified Acquisition Threshold, they do apply to 8(a), HUBZone, VOSB/SDVOSB, and WOSB/EDWOSB set-asides regardless of contract value if awarded sole source, and all firms awarded contracts above the threshold must comply with FAR 52.219-14, which caps subcontracting at specified levels with penalties for noncompliance. Firms must also be actively certified in their socioeconomic categories through the SBA’s certification portal to qualify for set-aside programs. The Army is explicitly seeking feedback to improve the draft Statement of Work and ensure the requirement is structured to maximize competition among small businesses. No cost reimbursement is provided for responses, and submissions will not be returned. Future solicitation, if issued, will be posted on the Governmentwide Point of Entry, and potential offerors are responsible for monitoring it for further updates.
W6QM Micc-Ft Knox

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
Federal
Cobra Radios
Solicitation # FA301626Q0201
The U.S. Department of Defense, through the FA3016 502 Cons Cl office at Joint Base San Antonio-Lackland, Texas, has issued a Request for Quote (FA301626Q0201) to procure 80 units of Cobra PX650 six-pack two-way radios with bulk chargers under a small business total set-aside using NAICS code 334220, which has a size standard of 1,250 employees. The solicitation requires full compliance with the salient characteristics outlined in Attachment 1 and mandates delivery to Lackland AFB, TX within 30 calendar days of contract award under FOB destination terms. The contract is strictly firm fixed price, and award will follow a lowest-priced, technically acceptable (LPTA) methodology, where technical acceptability is determined on a binary pass/fail basis without scoring or weighting of non-cost factors. All quotes must originate from small businesses registered in SAM.gov with valid Unique Entity IDs and CAGE Codes, and offerors must affirm compliance with all applicable FAR and DFARS clauses, including prohibitions on inverted domestic corporations, convict labor, child labor, human trafficking, and the use of covered telecommunications equipment. The radios must be individually marked in accordance with MIL-STD-130 using a machine-readable two-dimensional Data Matrix symbol compliant with ISO/IEC 16022 (ECC 200), containing the enterprise identifier and serial number according to ISO/IEC 15434 and ANSI MH10.8.2 standards. Shipment packaging and labeling must adhere to MIL-STD-129, and all items must be submitted for inspection and acceptance at the destination, LACKLAND AFB, TX, with receipt documented through the Wide Area WorkFlow system using approved document types. Payment will be processed via DoDAAC F87700, and invoice submission is mandated through WAWF, not IPP. The procurement is governed by numerous incorporated clauses, including 52.219-6 for small business set-aside, 52.204-13 for SAM maintenance, and 52.240-90/91 for security prohibitions, which collectively require offerors to ensure their supply chain complies with federal restrictions on prohibited technologies. No options, key personnel requirements, or additional contract clauses beyond those referenced are included, and the
FA3016 502 Cons Cl

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FA4887 56 Cons Cc

Same awarding agency

NAICS: 423690
New
Federal
Electronic Component Sourcing and Supply with Counterfeit MitigationThe contract mandates the supply of authentic, traceable military-grade electronic components with complete pedigree documentation to ensure the integrity of defense systems and eliminate the risk of counterfeit parts entering critical infrastructure. All components must meet stringent military specifications and be accompanied by verifiable sourcing records, chain-of-custody documentation, and authentication certifications to guarantee full traceability from manufacturer to end-user. The requirement is focused on preventing fraudulent or substandard components that could compromise mission-critical systems, with strict adherence to defense industry standards for part verification and provenance. This is a subcontract under the Department of Defense, with performance expected to occur in 85309, subject to the terms outlined in the solicitation, which was posted on July 24, 2026, and has a response deadline of August 7, 2026. The North American Industry Classification System code is 423690, indicating a focus on wholesale trade of electronic parts and equipment. While specific contact details are not provided, bidders must ensure compliance with defense supply chain security protocols and be prepared to demonstrate capability in sourcing and delivering components with guaranteed authenticity under tight timelines.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 316110
New
Federal
Material Supply – Shade FabricThe contract calls for the supply of high-durability architectural fabric specifically designed for replacing sunshade canopies, with stringent requirements for UV resistance, tensile strength, and fire resistance to meet industry and safety standards. The material must maintain structural integrity and aesthetic performance under prolonged exposure to harsh environmental conditions typical of outdoor military installations. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, meaning only small businesses are eligible to compete, and it is classified under NAICS code 316110, which covers textile mill products manufacturing. The solicitation was posted on July 24, 2026, with a firm response deadline of August 25, 2026, at 6:00 PM. Performance of the contract is required at Luke Air Force Base, with a zip code of 85309, indicating the fabric will be installed at a U.S. Department of Defense facility under the 56th Combat Support Group. Although no specific point of contact or office address is provided, the contracting activity is identified as FA4887 56 Cons Cc. The work involves delivering certified fabric that meets technical specifications for long-term outdoor use, ensuring safety, longevity, and compliance with federal and military-grade performance benchmarks, all while adhering to small business procurement objectives.
Leather and Hide Tanning and Finishing

POSTED

7 days ago

DEADLINE

in 25 days
View Details
NAICS: 238220
New
Federal
Coating and Paint Application (Protective)The contract entails the repainting and application of corrosion protection coatings to sunshade structures at Luke Air Force Base, with the primary goal of extending their service life through the use of weather-resistant materials designed to withstand environmental exposure. The work is classified under NAICS code 238220, indicating a specialty trade contractor scope focused on architectural coating and painting services, and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provisions, ensuring eligibility is limited to firms classified as small by federal standards. All work must comply with technical requirements for surface preparation, coating application, and durability standards specific to military infrastructure, with performance expected to maintain structural integrity and aesthetic quality under harsh operational conditions. This subcontract, posted on July 24, 2026, has a response deadline of August 25, 2026, and is managed by the Department of Defense under the FA4887 56 Cons Cc office. The place of performance is definitively located at Luke Air Force Base with a zip code of 85309, and all contractors must be prepared to meet federal defense specifications for protective coatings, including adherence to environmental, safety, and quality control protocols. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered for award under this competitively set-aside opportunity, with payment, compliance, and delivery terms governed by standard federal subcontracting regulations.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

7 days ago

DEADLINE

in 25 days
View Details
NAICS: 332312
New
Federal
Metal Fabrication and Structural RepairThe contract titled Metal Fabrication and Structural Repair pertains to the repair, refurbishment, and replacement of damaged or corroded metal components within sunshade structures at Luke Air Force Base, including frames, supports, and fasteners. The work involves specialized metal fabrication to restore structural integrity and ensure long-term durability of these components, with all activities required to meet military-grade standards for safety and performance. The scope is limited to on-site work at the designated location and demands precision in handling corroded materials while adhering to strict environmental and safety protocols. This is a total small business set-aside under the SBA, specifically designated as a FAR 19.5 set-aside, meaning only businesses certified as small by the SBA are eligible to bid. It falls under NAICS code 332312, which classifies metal fabrication services involving structural metal products. The contract was posted on July 24, 2026, with a response deadline of August 25, 2026, at 6:00 PM. The contracting activity is managed by the Department of Defense through the FA4887 56 Cons Cc office, and all work must be performed at Luke Air Force Base in Arizona, with zip code 85309. The procurement is structured as a subcontract, suggesting it may be part of a larger project, but bidders must comply fully with all applicable federal and defense contractual requirements.
Fabricated Structural Metal Manufacturing

POSTED

7 days ago

DEADLINE

in 25 days
View Details