Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

6530--Ceiling Lift Systems Installation and Removal of Existing Systems

Awarded
36C24126Q0825Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Veterans Affairs, Network Contracting Office 1, is seeking quotations for a firm fixed-price contract to remove existing lift systems and install 25 new Guldmann brand or equal ceiling lift systems at the Edith Nourse Rogers Memorial Veterans Hospital in Bedford, Massachusetts. The procurement includes various XY system configurations, including 3m x 3m, 4m x 4m, and 4m x 3m systems, as well as a specialized body-weight support rehabilitation module. All systems must feature a minimum lifting capacity of 605 lbs, integrated weighing scales, and continuous in-rail charging. The scope of work encompasses the full removal of old systems, professional installation, load testing, certification, and comprehensive operational and technical training. Technical requirements mandate that all structural drawings and calculations be signed and sealed by a licensed Professional Engineer and comply with specific VA seismic safety directives and ISO 10535:2021 standards. The installation must be performed by manufacturer-trained personnel and adhere to ICRA Level II conditions. This unrestricted solicitation, under NAICS code 339113, will be awarded based on a comparative evaluation of technical capability, past performance, price, warranty, speed of delivery, and veterans' involvement. Quotations must be submitted via email to the contracting specialist by 7 AM EST on September 22, 2026.

General Info

VA seeks installation of 25 ceiling lift systems at Bedford Hospital by September 2026.

Contract Value

$293,522

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

ME, USA

Set-Aside

NONE

Award Issued Date

Documents

2
PDF, High priority: read this firstrfq
High
DOCX, Low priority3 pages · award
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)
Contacts1 person available
OfficeTOGUS, ME, 04330, USA
Office AddressTOGUS, ME, 04330, USA
Contacts
Kurt J FritzContract Specialist

Full Description

Show more

Description


This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format Revolutionary FAR Overhaul (RFO) in Federal Acquisition Regulation (FAR) subpart 12.202, “Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued.



This solicitation is issued as an RFQ.  The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01.



This solicitation is Unrestricted.



The associated North American Industrial Classification System (NAICS) code for this procurement is 339113 - Surgical Appliance and Supplies Manufacturing, with a small business size standard of 800 Employees.



The FSC/PSC is 6530 - Hospital Furniture, Equipment, Utensils, and Supplies.



The Network Contracting Office 1 is seeking to purchase Gulmann Ceiling Lifts Upgrades at Edith Nourse Rogers Memorial Veterans' Hospital.



This is for Guldmann brand name or Equal.



All interested companies shall provide quotations for the following:



Item


Description


Quantity


Unit of Measure


Unit Price


Total Price


563355


3m x 3m System


GH3+ 275 110 F2 (605 lbs) Wifi, Scale, CLM,and service. Medium Hanger Bar. 3m x 3m XY System. Continuous In-Rail Charging. Complete System attaching to Deck


5


EA




563355


3m x 3m System


GH3+ 275 110 F2 (605 lbs) Wifi, Scale, CLM,and service. Medium Hanger Bar. 3m x 3m XY System. Continuous In-Rail Charging. New Rails and Transformer Utiizing Existing Structure.


8


EA




563355


4m x 4m System


GH3+ 275 110 F2 (605 lbs) Wifi, Scale, CLM,and service. Medium Hanger Bar. Continuous In-Rail Charging. Complete System attaching to Deck


6


EA




563355


4m x 3m System


GH3+ 275 110 F2 (605 lbs) Wifi, Scale, CLM,and service. Medium Hanger Bar. Continuous In-Rail Charging. Complete System attaching to Deck


4


EA




563361


4m x 4m System Trainer Module Motor


GH3+ 275 110 M6 (605 lbs) Wi-Fi, Trainer, Scale, CLM & Service. Medium Hanger Bar. Continuous In-Rail Charging. Complete System attaching to Deck


1





563355


4m x 3m System


GH3+ 275 110 F2 (605 lbs) Wifi, Scale, CLM,and service. Medium Hanger Bar. 3m x 3m XY System. Continuous In-Rail Charging. New Rails and Transformer Utiizing Existing Structure.


1


EA





GULDMANN CERTIFIED INSTALLATION. Non-Union Labor and hardware to install lifts in 25 rooms. Electrical work, existing structure demo, modification, or reinstallation including but not limited to ceilings, walls, tile, patching, painting, acoustic caulking, asbestos abatement, smoke/firewall repair, fireproofing reapplication, sprinkler relocation and door header modification is outside the scope of work for Guldmann installers and Guldmann is not licensed for performing such work, nor is Guldmann responsible for hiring specific contractors/trades to perform such work. ICRA up to level II provided; additional is responsibility of facility. Guldmann will perform light cleaning of the area but returning room to original condition is outside of scope of work for Guldmann installers. If an Above Ceiling Work Permit is required, facility must be provided. Weight test, certification included


1


EA





Removal of existing lift systems


25


EA





Operational Equipment Training


1


EA













**Salient Characteristics and Performance Work Statement Below**



Bedford VAMC – Performance Work Statement



1. Scope of Work


The Contractor must provide all labor, personnel, equipment, tools, materials, software, supervision, and other items and services required to remove existing lift systems and install 25 ceiling lift systems at Bedford VAMC.


2. Background


Bedford VAMC requires replacement of its existing ceiling lift systems, which have exceeded their service life. Overhead lifts are utilized to safely transport patients.


3. Objective


Establish a firm fixed‑price contract to procure and install 25 new ceiling lift systems, including all associated equipment, parts, accessories, documentation, and installation services.


4. Areas to Be Serviced


Edith Nourse Rogers Memorial Veterans Hospital
Bedford VA Medical Center
200 Springs Rd
Bedford, MA 01730


5. Specific Tasks


5.1 Structural Design Requirements


  • Designs must follow:
    1. VA Directive 7512, “Seismic Safety of VA Buildings” (AUG 2017)
    2. VA Handbook H-18-8, “Seismic Design Requirements” (NOV 2024)
    3. VA Specs Section 13 05 41, “Seismic Restraint Requirements for Non‑Structural Components” (JAN 2021)
  • Required structural drawings and calculations shall be signed and sealed by a Professional Engineer (PE) appropriately licensed for the project location.
  • Where required by applicable codes or VA requirements, provide Special Seismic Certification and supporting documentation for the applicable equipment/components.
  • Contractor must revise drawings if directed by the Medical Center.

5.2 Personnel Qualifications


  • All installation personnel must be manufacturer‑trained and fully qualified.

5.3 Waste Management


  • Contractor must provide, maintain, and dispose of all material waste and packaging.
  • Waste must be moved to a contractor‑provided container and removed from the premises.

6. Installation Requirements


Contractor must:


  • Provide all labor, materials, tools, and equipment needed for installation.
  • Coordinate installation dates in advance with Bedford VAMC Healthcare Technology Management (HTM).
  • Ensure all personnel comply with VA security management requirements and obtain VA Police authorization.
  • Communicate expected installation noise levels prior to starting work; modify work methods/timing as required.
  • Safely remove and dispose of all packing materials.

7. Training Requirements


Contractor must provide training including:


  1. Technical training
  2. Operational training
  3. Administrative training
  4. Hardware and software troubleshooting

8. Special Work Requirements


8.1 Safety, Privacy, and Security


Contractor must follow all VA standards, policies, and directives related to safety, privacy, and security while performing work.


10. Property Damage


Contractor must prevent damage to Government property and report any incidents immediately. Damaged property must be repaired or replaced at no cost to the Government unless corrective action is accepted by the Contracting Officer.


11. Site Rules


Contractor personnel must:


  • Wear visible identification at all times.
  • Park only in designated areas (no reimbursement for violations).
  • Follow VA restrictions on smoking, cellphone/two‑way radio use near medical equipment, weapon possession, and item inspection.


Salient characteristics



Patient Ceiling Lift System (QTY 25)



The contractor shall provide complete patient ceiling lift systems, including ceiling-mounted lifting units, rail/track systems, hanger/spreader bars, controls, charging equipment, mounting hardware, and other components necessary to provide fully functional systems.


All ceiling-mounted hoists, rails, and applicable components shall comply with ISO 10535:2021, as specified in the existing requirement



XY (H-Track/Traverse) Full-Room Coverage Rail System


Provide XY/traverse ceiling track systems capable of providing patient-transfer coverage throughout the designated treatment area:


  • Cover (3m x 3m area) (QTY 13)
  • Cover (4m x 4m area) (QTY 7)
  • Cover (4m x 3m area)  (QTY 5)

The system shall permit smooth multidirectional movement of a suspended patient throughout the required coverage area.


The track system shall accommodate the room configuration and shall be capable of installation using ceiling-mounted, recessed/integrated suspended-ceiling, wall-mounted, or other structurally suitable installation methods necessary for the individual room.


Final track configuration and mounting method shall be determined based on site conditions and approved design/engineering requirements.



Ceiling Lift / Hoist Motor (QTY 25)



Provide a powered ceiling-mounted patient lift/hoist capable of safely lifting and lowering a patient weighing at least 605 lb (275 kg).


The lift shall:


  • Have a rated lifting capacity of at least 605 lb (275 kg).
  • Integrated patient-weighing capability capable of measuring and displaying patient weight during use.
  • Provide smooth, controlled powered raising and lowering appropriate for patient handling
  • Be available with powered horizontal travel, where required, controllable through the system's user control.
  • Include mechanical and electrical emergency-lowering provisions, emergency stop, and overload protection.
  • Utilize a rechargeable battery system providing sufficient capacity for normal clinical operation.
  • Provide a charging system that minimizes the need for caregivers to manually position the lift at a dedicated charging location.
  • Provide appropriate visual and/or audible battery/charging status indication.
  • Automatically enter an operational state when required for use, if automatic activation is required.
  • Have an impact-resistant, flame-retardant housing suitable for repeated use and cleaning in a healthcare environment.

Hand Control (QTY 25)



  • Display the patient weight measured by the system's integrated weighing scale directly on the hand control.

Medium Hanger/Spreader Bar (QTY 25)



Provide one ceiling-lift-compatible body-weight-support system for the designated 4 m × 4 m rehabilitation area. The capability may be integrated into the ceiling lift or provided through a compatible accessory or component designed for use with the proposed ceiling-track system.


The hanger bar shall:


  • Have a rated capacity equal to or greater than the maximum rated capacity of the proposed lift system.

  • Provide four sling attachment points where required for the intended sling configuration.
  • Be constructed of durable, corrosion-resistant material suitable for healthcare environments.
  • Incorporate surfaces/materials that facilitate routine cleaning and disinfection.
  • Be appropriately sized for the intended patient population and clinical applications.
  • Be designed for safe and convenient caregiver handling.


Body-Weight Support / Rehabilitation Capability (QTY 1)



  • System shall provide adjustable partial body-weight support suitable for rehabilitation activities such as standing, sit-to-stand, stepping, balance, gait/mobility training, and similar therapeutic exercises. The capability may be integrated into the ceiling lift or provided through a compatible accessory or system.

Installation (QTY 25)


  • The contractor shall provide all labor, mounting hardware, equipment, testing, and services necessary to install and commission complete ceiling lift systems in 25 rooms.
  • Installation shall include removal of existing lift systems where required, coordination with facility requirements, support for the specified ICRA Level II conditions, and load/weight testing and certification of the completed systems.
  • Required structural or construction-trade work outside the lift installer's licensing or scope shall be identified and coordinated in accordance with the final statement of work.
  • Install the ceiling lift, track, supports, anchors, and associated components in accordance with the approved structural/seismic design and manufacturer's requirements.

Structural and Seismic Requirements (QTY 1)


  • Stamped Engineering Calculations

User Training (QTY 25)


The following solicitation provisions and clause apply to this acquisition:



ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION AUG 2025)


Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The version of FAR 52.212-1 in the addendum is tailored for Simplified Acquisition Procedures and supersedes the current version of FAR 52.212-1 contained in the FAR.


The following provision is incorporated into 52.212-1 as an addendum to this solicitation:


52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION AUG 2025)


(a) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include—


(1) The solicitation number;


(2) The name, address, telephone number of the Offeror;


(3) The Offeror’s Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator;


(4) Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation;


(5) Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and


(6) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments.


(b) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.


(c) Late submissions, modifications, revisions, and withdrawals of offers.


(1) Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation.


(2) Any offer, modification, or revision received after the time specified for receipt of offers is “late” and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted.


(3) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.


(4) Offerors may withdraw their offers by written notice to the Government received at any time before award.


(d) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror’s initial offer should contain the Offeror’s best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received.


(e) Debriefings. If a postaward debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable:


(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed Offeror’s offer.


(2) The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror.


(3) The overall ranking of all Offerors when any ranking was developed by the agency during source selection.


(4) A summary of the rationale for award.


(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror.


(6) Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities.


(End of provision)




52.252-2 Clauses Incorporated by Reference (FEB 1998)


This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):


https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 (FAR)


http://www.va.gov/oal/library/vaar/index.asp (VAAR)




52.203-17            Contractor Employee Whistleblower Rights. (NOV 2023)


52.203-19            Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. (JAN 2017)


52.209-6              Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (JAN 2025) (DEVIATION NOV 2025)


52.209-10            Prohibition on Contracting With Inverted Domestic Corporations. (NOV 2015) (DEVIATION NOV 2025)


52.222-3              Convict Labor. (JUN 2003) (DEVIATION NOV 2025)


52.222-35            Equal Opportunity for Veterans. (JUN 2020) (DEVIATION NOV 2025)


52.222-36            Equal Opportunity for Workers with Disabilities. (JUN 2020) (DEVIATION NOV 2025)


52.222-50            Combating Trafficking in Persons. (NOV 2021) (DEVIATION NOV 2025)


52.222-53            Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements. (MAY 2014) (DEVIATION NOV 2025)


52.222-54            Employment Eligibility Verification. (JAN 2025) (DEVIATION NOV 2025)


52.222-90            Addressing DEI Discrimination by Federal Contractors (APR 2026)


52.223-23            Sustainable Products. (MAY 2024) (DEVIATION NOV 2025)


52.225-5              Trade Agreements. (NOV 2023)


52.226-8              Encouraging Contractor Policies to Ban Text Messaging While Driving. (MAY 2024)


52.232-33            Payment by Electronic Funds Transfer-System for Award Management. (OCT 2018)


52.232-40            Providing Accelerated Payments to Small Business Subcontractors. (MAR 2023)


52.233-3              Protest after Award. (AUG 1996) (DEVIATION NOV 2025)


52.244-6              Subcontracts for Commercial Products and Commercial Services. (JAN 2025) (DEVIATION APR 2026)


852.203-70          Commercial Advertising (MAY 2018)


852.211-70          Equipment Operation and Maintenance Manuals (NOV 2018)


852.212-71          Gray Market and Counterfeit Items (FEB 2023)


852.215-70          Service-Disabled Veteran-Owned and Veteran-Owned Small Business Evaluation Factors (JAN 2023) (DEVIATION)


852.215-71          Evaluation Factor Commitments (OCT 2019)


852.232-72          Electronic Submission of Payment Requests (NOV 2018)



52.225-6 TRADE AGREEMENTS CERTIFICATE (FEB 2021)


  (a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."


   (b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.


Other End Products


Line item No.


Country of origin
































[List as necessary]



  (c) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for those products are insufficient to fulfill the requirements of this solicitation.


All quotes shall be sent via email to:


(End of Provision)


           


Mr. Kurt Fritz


Contract Specialist, Commercial Team 3


Veterans’ Health Administration


Regional Procurement Office East


Network Contracting Office 1 (New England)



            Email: contact@example.gov



Award will be based upon a comparative evaluation of quotes in accordance with the Simplified Acquisition Procedures of RFO FAR 12.



ADDENDUM to 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION AUG 2025)


  1. The following factors shall be used to evaluate quotations:

  1.     Technical Capability
  2. Past Performance
  3. Veterans’ Involvement
  4. Price
  5. Warranty
  6. Speed of Delivery

  1. Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process outlined in RFO 12.201-1 Simplified procedures, where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Quotations may exceed minimum requirements of the solicitation. The Government reserves the right to select a quotation that provides benefit to the Government that exceeds the minimum requirements of the solicitation but is not required to do so. Each response must meet the minimum requirements of the solicitation. The Government is not requesting or accepting alternate quotations. The evaluation will consider the following:

  1. Technical or Quality: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government’s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation.
  2. Past Performance: The past performance evaluation will assess the relative risks associated with a quoter’s likelihood of success in fulfilling the solicitation’s requirements as indicated by the quoter’s record of past performance. The past performance evaluation may be based on the contracting officer’s knowledge of and previous experience with the supply or service being acquired; Customer surveys, and past performance questionnaire replies; Contractor Performance Assessment Reporting System (CPARS) at http://www.cpars.gov/;   or any other reasonable basis.
  3. Veterans Involvement: In accordance with Veterans Affairs Acquisition Regulation (VAAR) 852.215-70 (DEVIATION), Service-Disabled Veteran-Owned and Veteran-Owned Small Business (VOSB) Evaluation Factors, the Government will assign evaluation credit for a Quoter (i.e., prime contractor) which is a Service-Disabled Veteran-Owned Small Business (SDVOSB) or a VOSB.  To receive credit, an offeror must be registered and verified in SBA.gov database at time of quotation submission and at time of award (  https://certifications.sba.gov/) and must meet federal small business size standards for the North American Industry Classification System (NAICS) code assigned to this solicitation. Non-SDVOSB/VOSB quotations that use SDVOSBs or VOSBs as subcontractors will receive some consideration under this evaluation Factor. Quoters must state in their quotations the names of the SDVOSBs and VOSBs with whom they intend to subcontract and provide a brief description of the proposed subcontracts and the approximate dollar values of the proposed subcontracts. In addition, the proposed subcontractors must be registered and verified in the SBA.gov database https://certifications.sba.gov/ and must meet federal small business size standards for the NAICS code assigned to this solicitation at time of both quotation submission and at time of award.
  4. Price: The Government will evaluate the price by adding the total of all line-item prices. The Total Evaluated Price will be that sum.



FAR 52.212-4, “Contract Terms and Conditions-Commercial Products and Commercial Services” (NOV 2023) (DEVIATION OCT 2025)



To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows:



"The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition."


OR


"The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:"


 Quoters shall list exception(s) and rationale for the exception(s), if any.



Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(c).



Submission of your response shall be received not later than 7AM EST, September 22nd, 2026.



Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed above.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Same awarding agency

NAICS: 561720
New
Federal
S201--Aseptic Janitorial/or Custodial Services WRJ White River J
Solicitation # 36C24127Q0048
The Department of Veterans Affairs, through Network Contracting Office 1, is soliciting a Firm Fixed Price contract for aseptic custodial and janitorial services at the White River Junction VA Medical Center in Vermont. This total set-aside opportunity is reserved exclusively for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The scope of work covers approximately 189,891 square feet of interior space, including public areas, offices, and clinical spaces, though in-patient care rooms and the emergency room are specifically excluded. Key responsibilities include vacuuming, mopping, restroom cleaning, linen transport, and the removal of regulated medical waste and sharps containers. The contractor must employ personnel trained in aseptic cleaning techniques and adhere to the facility's Standard of Cleanliness, as well as regulations from OSHA, The Joint Commission, and the OIG. The contract features an initial performance period of 365 calendar days with four one-year option periods, totaling a maximum duration of five years. Award will be based on a comparative evaluation of price and technical factors, including management capabilities and quality control. Personnel requirements are stringent, requiring English language proficiency and documented competency in aseptic techniques, with evaluations conducted bi-annually in April and September. Compliance with the System for Award Management (SAM) is mandatory, and the prime contractor must ensure that no more than 50 percent of the contract value is paid to firms not certified as SDVOSBs. Failure to maintain information security or misrepresenting business status may lead to the withholding of payment or debarment.
Janitorial Services

POSTED

about 11 hours ago

DEADLINE

in 29 days
View Details
NAICS: 532490
New
Federal
W038--Rental & Support Services for Wheeled Loaders w/3yard bucket
Solicitation # 36C24126Q0815
The Department of Veterans Affairs VA Maine Healthcare System Togus is soliciting quotes for the rental and support of two wheeled loaders equipped with 3-yard buckets and Fusion couplers. The equipment will be used for snow removal from parking lots at the Togus VAMC campus, with an anticipated start date of November 9, 2026. The rental is on a month-to-month basis for an undetermined duration, estimated between one and six months. Each loader must meet or exceed specifications comparable to CAT 926 or CAT 930 models, featuring 160 to 170 hp Tier 4 Final engines, ROPS/FOPS certified cabs with climate control, and four liquid-filled tires for added weight. The selected contractor must provide comprehensive 24/7 service and support, including all preventive maintenance and repairs. Repairs must be initiated within 24 hours of notification, or a replacement loader must be provided at no additional cost. This procurement is a total set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 532490. Award will be made to the technically acceptable vendor offering the lowest evaluated price, based on an evaluation of technical capability, past performance, and total price. Quotes must include a monthly rental rate and itemized delivery and pickup charges, with a submission deadline of November 2, 2026.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

4 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 238990
New
Federal
Amendment 0001- Replacement-in-Kind Repair of Existing Perimeter Security Fence (Ameristar Impasse Trident) Brand Name or Equal
Solicitation # 36C24127Q0041
The Department of Veterans Affairs VA Boston Healthcare System is soliciting quotes for a firm-fixed-price contract to perform a localized replacement-in-kind repair of the perimeter security fence at the Brockton VA Campus in Brockton, Massachusetts. The project focuses on restoring five affected fence bays and six associated post locations that were damaged by winter snow-removal activities. The benchmark product is the Ameristar Impasse Trident system, and any proposed equal must meet all salient characteristics, including the use of corrosion-resistant, tamper-resistant hardware and a uniform transition in profile, color, and finish to the existing fence. The scope is strictly limited to the damaged sections and does not authorize any redesign or expansion of the perimeter. This procurement is a total set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The period of performance is scheduled from December 1, 2026, to January 31, 2027. Award will be made to the responsible offeror determined to be most advantageous based on price, past performance, and technical capabilities. Proposals must be submitted in three separate PDF volumes covering technical approach, past performance, and pricing. Following Amendment 0001, a site visit is scheduled for November 10, 2026, and the closing date for the receipt of offers has been extended to November 13, 2026, at 1:00 PM EST.
All Other Specialty Trade Contractors

POSTED

4 days ago

DEADLINE

in 11 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS