Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Certified Material and Coating Supply

Active

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Certified Material and Coating Supply, is issued by the Department of Energy through the ORNL UT-Battelle LLC-DOE Contractor to support US ITER projects. The scope of work involves the supply of certified raw materials and alloys, as well as the execution of industrial painting and specialized coating applications using industrial coating systems for prime contractors. The contractor is required to provide comprehensive material certifications and detailed documentation verifying the specific coatings applied to all components. The final deliverables consist of certified raw materials and fully coated components, ensuring all technical specifications and certification standards are met for the project.

General Info

DOE subcontract for certified raw materials and specialized industrial coatings for US ITER.

Agency

Department Of Energy → Ornl Ut-Battelle Llc-Doe ContractorView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 1237.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

US ITER: DRGA Analysis Station Design Build

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified raw materials and applies specialized coatings for prime contractors on US ITER projects. Provides certified alloys and executes industrial painting or specialized coating applications using industrial coating systems. Requires full material certifications and documentation certifying the specific painting/coating applied. Delivers certified raw materials and coated components.

Similar Contracts

Same NAICS industry code

Supply of Industrial Grade Alloy/Steel StockThis subcontract, titled Supply of Industrial Grade Alloy/Steel Stock, is issued by the ASC Commodities Division of the Department of Defense. The contractor is responsible for sourcing, cutting to length, and delivering certified alloy steel or specialty metal bars and rods that meet RA001 technical requirements. These materials are intended for prime contractors delivering DLA supply contracts, with the place of performance located at Hill AFB. To ensure quality and adherence to aerospace or military grade material standards, the provider must supply Material Test Reports and certifications of compliance. The opportunity is categorized under NAICS code 331210, with a response deadline of September 30, 2026.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Specialized Component SupplyThis subcontract, titled Specialized Component Supply, is issued by the Strategic Acquisition Program Directorate within the Department of Defense. The contractor is responsible for providing raw materials and sub-components to prime contractors for DLA supply contracts, specifically focusing on the production of U-joints, bearings, and forged tubes for drive shaft assemblies. These components are manufactured using high-grade alloys and forged steel through processes including forging, casting, and precision machining. The scope of work specifically covers the delivery of machined sub-components for NSN 2520200005207. To ensure compliance, the contractor must provide all necessary material certifications and adhere to strict domestic origin requirements. The opportunity was posted on September 22, 2026, with a response deadline of October 7, 2026, falling under NAICS code 331210.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

Supply of Aerospace-Grade Tubing/Materials for Bleed Air SystemsThis subcontract involves the supply of aerospace-grade tubing and raw materials, including fittings and high-temperature resistant alloys such as Inconel, Titanium, and Stainless Steel. These materials are intended for prime contractors manufacturing bleed air systems for DLA Aviation. To ensure full compliance with technical specifications for NSN 1560016109884, the supplier must provide all necessary material certifications and Mill Test Reports upon delivery to the manufacturer. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base. Operating under NAICS code 331210, the opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-431U

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

TUBE AND FITTINGS, META

Solicitation # SPE4A5-26-T-412S

This contract, solicitation number SPE4A5-26-T-412S, is issued by the Department of Defense ASC Supplier OEM Division for the procurement of four metallic tubes and fittings, identified by NSN 4710-01-290-3531 and Sikorsky Aircraft Corporation part number 70307-83008-049. This is a critical application item with a required delivery date of June 4, 2028, and a delivery window of 171 days after receipt of order. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement incorporates several stringent quality and security requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and tailored higher level contract quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Sampling for acceptance is governed by Sikorsky Corporation's alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Item Unique Identification is not required per the service customer's request.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Metallic Tube Supplier

Department of National Defence

POSTED

DEADLINE

Supply of 3/8" Galvanized Steel Guy WireThis subcontract involves the supply of 30,000 feet of 3/8 inch galvanized steel guy wire for prime contractors working on Nashville Electric Service utility projects in Nashville. The required material must be seven-strand, preformed, Class A, Extra High Strength grade wire sourced from approved manufacturers including Amerstrand, Bekaert, Emcobls, National, or Rohm. The wire must be delivered on nonreturnable reels of 5,000 feet each, featuring metal center hub collars and adhering to specific diameter and width constraints. The solicitation was posted on September 22, 2026, with a response deadline of September 28, 2026.

Nashville Electric Service

POSTED

DEADLINE

Solicitation # W8482-275677/A

Department of National Defence

POSTED

DEADLINE

Steel and Plastic Pipe SupplyThis subcontract agreement involves the procurement and delivery of industrial steel and HDPE plastic piping materials for EPCOR Canada utility infrastructure projects located in Ontario. The selected provider will be responsible for supplying these materials to prime contractors across various project sites, ensuring that all delivered piping is fully compliant with both EPCOR standards and Ontario provincial codes. The solicitation for this supply contract was posted on September 21, 2026, with a response deadline of October 16, 2026. Classified under NAICS code 331210, the contract focuses on the essential logistics and material supply chain necessary to support large-scale utility infrastructure development within the region.

POSTED

DEADLINE

Supply of Conduit (NSN 5975-01-062-2174)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Certified Raw Material Supply for CSI ComponentThis subcontract involves the supply of certified raw materials for prime contractors working on US Navy projects, specifically for CSI Components. The provider is responsible for sourcing and delivering high-grade aerospace or military-spec alloys that strictly adhere to technical data package specifications. A critical requirement of the contract is the provision of full material certifications and traceability documentation to ensure quality and compliance. The performance of this contract takes place in San Diego, California, under the oversight of the Department of Defense. All packages must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Interested parties must respond by September 28, 2026, for this opportunity categorized under NAICS code 331210.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Raw Material Supply for NSN 0133-41-882This subcontract involves the supply of certified raw materials required for prime contractors to manufacture NSN 0133-41-882 under DLA supply contracts. The scope of work includes sourcing aerospace-grade metals, alloys, or polymers and ensuring all materials are accompanied by necessary Material Test Reports and Certificates of Conformance. Additionally, the provider is responsible for identifying and documenting any hazardous materials in accordance with solicitation requirements, which includes the provision of Safety Data Sheets. The contract is managed by the Department of Defense through the ASC Commodities Division, with the place of performance designated at Hill AFB. The procurement falls under NAICS code 331210 and requires the delivery of both the certified materials and all relevant safety documentation. Interested parties must adhere to the response deadline of September 28, 2026, to be considered for this requirement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Energy → Ornl Ut-Battelle Llc-Doe Contractor

Same awarding agency

Installation of Modular Hot Cells (MHCs)This subcontract involves the on-site installation and integration of up to 14 Modular Hot Cells within the Radioisotope Processing Facility at Oak Ridge National Laboratory. The selected provider will be responsible for aligning and interfacing these units for prime contractors on Department of Energy projects, ensuring the delivery of fully installed and interfaced cells. All work must be performed in strict accordance with Hazard Category 2 nuclear facility safety requirements and comprehensive ESH&Q compliance standards. The project is managed by Ornl Ut-Battelle Llc-Doe Contractor under NAICS code 238290.

Other Building Equipment Contractors

POSTED

about 10 hours ago

DEADLINE

Shipment of Shielded Modular Hot CellsThis subcontract involves providing specialized transportation and rigging services for prime contractors delivering equipment to the Oak Ridge National Laboratory. The primary scope of work focuses on the hauling of oversized and overweight shielded modular hot cells from fabrication shops to the Radioisotope Processing Facility site. The contractor will utilize heavy-haul trailers and specialized rigging equipment specifically designed for nuclear components to ensure the safe delivery of these structures to the designated site. This project is managed under the Department of Energy through the ORNL UT-Battelle LLC contractor.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

Fabrication of Modular Hot Cells (MHCs)This subcontract involves the fabrication of high-precision, shielded modular hot cells for prime contractors supporting Department of Energy projects at Oak Ridge National Laboratory. The scope of work focuses on manufacturing primary radiological confinement structures utilizing heavy shielding materials such as lead, steel, and concrete, while ensuring all units integrate strict ESH&Q standards for nuclear environments. The project requires the delivery of up to 14 completed Modular Hot Cell units ready for shipment. Managed by ORNL UT-Battelle LLC, the contract falls under NAICS code 332999 and is specifically designed to support the infrastructure of radioisotope processing facilities.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Modular Hot Cell (MHC) Conceptual and Detailed DesignThis subcontract involves the conceptual and detailed engineering design of Transloading and Processing Modular Hot Cells for prime contractors operating at the Oak Ridge National Laboratory. The scope of work focuses on developing comprehensive design packages and blueprints for cells that interface with shielded shipping casks specifically for irradiated HFIR targets. All engineering must adhere to Hazard Category 2 nuclear facility standards to ensure primary radiological confinement and shielding. The project is managed under the Department of Energy through the Ornl Ut-Battelle Llc-Doe Contractor, falling under NAICS code 541330 for engineering services.

Engineering Services

POSTED

about 10 hours ago

DEADLINE

Request for Information: Radioisotope Processing Facility Modular Hot Cells

Solicitation # 1238

UT-Battelle is issuing a Request for Information to identify industry capabilities for the design and fabrication of Modular Hot Cells (MHCs) for the Radioisotope Processing Facility (RPF), a Hazard Category 2 nuclear facility at Oak Ridge National Laboratory. The scope includes the design of both Transloading and Processing MHCs, with the initial requirement being the fabrication, shipment, and installation of one Transloading MHC. Transloading units are intended to interface with shielded shipping casks for the transfer of irradiated HFIR targets, while Processing units are designed for chemical, mechanical, and thermal processing, glovebox integration, and waste management. The agency may exercise future options for an additional six Transloading MHCs and seven Processing MHCs. The future award is intended to be a competitive Basic Ordering Agreement utilizing fixed price and time and material task orders, with an anticipated start in late 2027. Technical requirements specify that installation must be compatible with air-skate transfer over reinforced floors due to the absence of overhead cranes in the process bays. Interested respondents must provide a narrative summary detailing their company capabilities, DOE or federal work experience, and two examples of similar projects. Additionally, submissions must include a methodology for environment, safety, health, and quality (ESH&Q) principles, an estimated proposal development timeline, and a budgetary cost range. The response deadline is October 23, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

ISPM-15 Compliant Packaging and Export PreparationThis subcontract with ORNL UT-Battelle LLC involves the supply and execution of specialized packaging and export preparation for prime contractors on US ITER projects destined for Cadarache, France. The scope of work includes the design and implementation of shock, impact, and weather-protected packaging systems utilizing cargo securement and ISPM-15 compliant wood materials. The contractor is responsible for delivering packaged analysis stations, comprehensive package design documents, and detailed packing lists, including Declarations of Integrity. Strict adherence to ISPM-15 and CE mark compliance is required to ensure all shipments meet international shipping and regulatory standards.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

NDE and Quality Inspection ServicesThis subcontract for NDE and Quality Inspection Services, managed by ORNL UT-Battelle LLC for the Department of Energy, focuses on performing non-destructive testing and dimensional inspections for prime contractors on US ITER projects. The primary objective is to verify hardware and welding integrity against technical drawings using Visual, Magnetic, Ultrasonic, and Radiographic testing methods. The selected provider must utilize specialized UT, RT, and MT inspection equipment and ensure all personnel hold the necessary NDE inspector qualifications. Compliance with the project Inspection Plan is mandatory, and the contractor is responsible for delivering all required quality assurance records and seller inspection reports.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Magnetic Shielding Engineering and ValidationThis subcontract with the Department of Energy, managed by ORNL UT-Battelle LLC, focuses on the engineering and validation of magnetic shielding for US ITER projects. The primary objective is to design and validate shielding that ensures internal magnetic fields remain at or below 25 mT when exposed to an external field of 175 mT. The scope of work includes developing compliance plans, performing static magnetic field testing, and fabricating prototype shields using high-permeability alloys such as Mu-metal. The contractor is required to utilize high-field magnetic testing equipment and strictly adhere to the US ITER Design Analyses and Calculations Procedure. Key deliverables for this engagement include comprehensive shielding designs, detailed test plans, and the delivery of validated prototypes. The project is categorized under NAICS code 541330 for engineering services.

Engineering Services

POSTED

about 10 hours ago

DEADLINE

DRGA Analysis Station Fabrication and AssemblyThis subcontract with the Department of Energy, managed by ORNL UT-Battelle LLC, involves the fabrication and assembly of two DRGA Analysis Stations for the EP11 and LP12 systems supporting US ITER projects. The scope of work includes precision machining, assembly, and welding operations conducted in accordance with the Code of Construction, as well as the application of specific painting and coatings. The contractor must utilize high-precision tools and welding equipment that comply with PQR and WPS standards. Strict adherence to ASME, AWS, ASTM, and CE standards is required, and all welding personnel must hold the necessary certifications. The final deliverable consists of two fully completed analysis stations.

POSTED

about 10 hours ago

DEADLINE

US ITER: DRGA Analysis Station Design Build

Solicitation # 1237

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

High Voltage Cabinet

Solicitation # 1230

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 10 hours ago

DEADLINE

Government Computing Facility

Solicitation # 1229

UT-Battelle is seeking partners for the Government Computing Facility, a state-of-the-art project at ORNL. This multi-level facility will encompass approximately 329,000 gross square feet and feature a two-story data center with two distinct data halls located on the second level. The project falls under NAICS code 236220 and is managed by the Department of Energy through Ornl Ut-Battelle Llc-Doe Contractor. A presolicitation meeting will be held via Microsoft Teams on Thursday, May 21 at 1 p.m. EST to provide a brief overview of the facility. Interested parties should contact Leah Swaggerty at swaggertylb@ornl.gov to receive a meeting invitation. Additional inquiries can be directed to the primary point of contact, Kyle Young.

Commercial and Institutional Building Construction

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS