Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Certified Production and Repair Welding

Active

Federal

Response Deadline11/06/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Certified Production and Repair Welding supports Navsup Weapon Systems Support Mech projects for the Department of Defense. The selected contractor will perform production and repair welding on connector components, specifically executing tack and spot welds in accordance with S9074-AR-GIB-010A/278. Key deliverables include the finished welded components and corresponding Certificates of Conformance for consumed weld metal. To ensure compliance, the contractor must submit all welding procedures and qualification data for official Navy approval. The project requires strict adherence to Navy-approved welding qualifications. Interested parties should note the response deadline of November 6, 2026, and the classification under NAICS code 238320.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFF51.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR,THRU-HULL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 08:30:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs production and repair welding for prime contractors on Navsup Weapon Systems Support Mech projects. Executes welding on connector components per S9074-AR-GIB-010A/278 for tack/spot welds. Submits welding procedures and qualification data for Navy approval. Requires Navy-approved welding qualifications and provision of Consumed Weld Metal Certificates of Conformance. Delivers welded components and C of C documentation.

Similar Contracts

Same NAICS industry code

Painting and Fireproofing ServicesThis subcontract for Painting and Fireproofing Services involves the application of protective and decorative coatings as well as fire-rated materials for prime contractors working on City of Grande Prairie projects. The scope of work includes general painting for renovation projects and the application of specialized fireproofing to ensure certified safety standards are met across all designated areas. Interested parties must hold a valid COR, COREL, or SECOR safety certification to be eligible. The solicitation was posted on October 16, 2026, with a response deadline set for November 6, 2026. This opportunity falls under NAICS code 238320 and is managed by the City of Grande Prairie.

City of Grande Prairie

POSTED

about 10 hours ago

DEADLINE

Steel Surface Preparation and Industrial CoatingThis subcontract for the City of Chattahoochee Hills involves specialized steel surface preparation and industrial coating for bridge projects. The scope of work requires the contractor to grind existing I-beams to eliminate rust and old paint, followed by the application of multi-coat systems consisting of primers and water-based alkyd urethanes. To ensure environmental safety and site cleanliness, the contractor must utilize plastic sheeting for the full capture and containment of all debris during the process. The primary objective is the delivery of fully prepped and coated structural steel bridge components. This opportunity falls under NAICS code 238320 and was posted on October 16, 2026, with a response deadline of November 19, 2026.

City of Chattahoochee Hills

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Industrial Pipe Identification and LabelingThis subcontract for Industrial Pipe Identification and Labeling involves performing color-coding and labeling of interior piping systems for prime contractors on Greater Dayton RTA facility projects. The scope of work requires the application of content-specific colors and identification labels using industrial enamel paints and standardized labels, ensuring all work adheres to ANSI/ASME A13.1 standards and safety regulations. The project is categorized under NAICS code 238320 and is managed by the Capital Management/Executive agency in Ohio. Interested parties must submit their responses by the deadline of December 1, 2026.

Capital Management/Executive

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Industrial Interior and Exterior PaintingThis subcontract for Industrial Interior and Exterior Painting involves providing specialized coating services for Greater Dayton RTA facility projects. The scope of work includes comprehensive surface preparation to remove grease, diesel soot, and loose coatings, followed by the application of primers and finish coatings to masonry, structural steel, and bus garages. All work must be performed in accordance with MPI and SSPC/AMPP standards, and the contractor is responsible for providing necessary aerial lifts and scaffolding to complete the project and deliver warranted coatings. To ensure safety and quality, all personnel are required to have at least five years of industrial experience and specific LOTO safety training for overhead traction power. This opportunity is categorized under NAICS code 238320 and is managed by Capital Management/Executive in Ohio. Interested parties must submit their responses by the deadline of December 1, 2026.

Capital Management/Executive

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Maintenance Facility Painting Project

Solicitation # GD 26-53

Capital Management/Executive

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Certified Welding Services for Pressure-Proof AssembliesThis subcontract for Certified Welding Services for Pressure-Proof Assemblies supports NAVSUP Weapon Systems Support projects by providing critical welding for high-pressure naval hull components. The scope of work involves executing specialized welds on pressure-proof assemblies for prime contractors and developing comprehensive weld procedures subject to review and acceptance by the Portsmouth Naval Shipyard. The selected provider is responsible for delivering fully welded components along with a certified Weld Procedure and Qualification Data package. Key deliverables include certified weld qualification data and Certification Contract Data Requirements Lists to ensure all naval standards are met. This Department of Defense requirement falls under NAICS code 238320.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Specialized Marine Coating and Corrosion ControlThis subcontract involves the supply and application of high-performance marine coatings designed to prevent corrosion for prime contractors supporting NAVSUP Fleet Logistics Center Yokosuka CVN projects. The scope of work encompasses comprehensive surface preparation, the application of primers and topcoats, and the execution of non-destructive testing to ensure all surfaces meet strict Navy specifications. The project requires specialized certification in military-grade coating systems under NAICS code 238320. Interested parties must respond by October 31, 2026, to provide these critical corrosion control services for the Department of Defense.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

Protective Coating Maintenance IDIQ

Solicitation # FA302026Q0104

Solicitation FA302026Q0104 is a request for quotes for a single-award, Firm Fixed Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract to provide Protective Coating Maintenance (PCM) services at Sheppard Air Force Base, Texas. The scope of work includes interior and exterior painting, surface preparation, floor refinishing, pavement markings, and the fabrication and installation of signage in accordance with base and federal standards. The contract features a five-year ordering period from November 1, 2026, to September 30, 2031, with a minimum contract value of 50,000 dollars and a maximum ceiling of 9,000,000 dollars. This requirement is 100 percent set aside for SBA Certified Economically Disadvantaged Women-Owned Small Business (EDWOSB) concerns under NAICS code 238320. Award will be based on best value, evaluating technical acceptability, price, and past performance, with past performance weighted slightly more than price for technically acceptable quotes. Technical requirements include a minimum of five years of federal experience in protective coatings and a scalable manning plan capable of handling surge requirements, such as working in two large dormitory facilities simultaneously. Offerors must submit their quotes via the PIEE solicitation module in three distinct volumes covering technical acceptability, price, and past performance. Key administrative requirements include the provision of performance and payment bonds, compliance with prevailing wage determinations for Grayson, Wichita, and Tillman/Washita counties, and the use of the Wide Area WorkFlow (WAWF) system for invoicing.

FA3020 82 Cons Lgc

POSTED

about 14 hours ago

DEADLINE

Dispensing Unit PaintingThis subcontract for Dispensing Unit Painting involves providing industrial painting services for prime contractors working on Pakistan State Oil Company Ltd fuel station projects within the Sahiwal Division. The scope of work includes the preparation of metal surfaces on dispensing units and the application of industrial-grade primers and finish coats that adhere to specific corporate branding colors. The contractor is responsible for providing all necessary industrial spray equipment and masking materials to deliver fully painted units. To be eligible, applicants must be active taxpayers and maintain a safety record with no fatal accidents over the previous two years. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026. This opportunity falls under NAICS code 238320 and is managed by Pakistan State Oil Company Ltd.

Pakistan State Oil Company Ltd

POSTED

about 19 hours ago

DEADLINE

RFP RF-32060-AS (Dispensing Unit Painting and Graphic Work at NVROs of Sahiwal Division)

Solicitation # Doc341256454

Pakistan State Oil Company Limited has issued solicitation RF-32060-AS for dispensing unit painting and graphic work at NVRs within the Sahiwal Division. This procurement is conducted in accordance with PPRA Clause 42 b, with e-bids submitted through the SAP Ariba portal. The submission deadline is October 22, 2026, at 2:15 PM, with bid opening scheduled for 2:30 PM on the same day. Administrative oversight is managed by the PSO Regional Office located in Gulberg III, Lahore. Eligible bidders must be active taxpayers and provide scanned copies of a valid NTN, GST/PST certificates, and the CNIC of the owner or authorized representative. To request tender documents, bidders must upload a signed and stamped request on official letterhead to the SAP Ariba portal. Qualification requirements include adequate past relevant experience and financial capabilities. Additionally, vendors must certify that they have not been blacklisted by PSO or any other public or private entity and have not been involved in any fatal accidents during project execution within the last two years. Conditional or partial proposals will be rejected, and any incomplete or false information will lead to immediate disqualification.

Pakistan State Oil Company Ltd

POSTED

about 19 hours ago

DEADLINE

Flooring and FinishesThis subcontract agreement involves the supply and installation of floor coverings and wall finishes for a Texas Department of Transportation facility project, specifically focusing on a training room renovation in Wichita Falls. The scope of work requires the contractor to install commercial carpet, luxury vinyl tile, and interior paint to deliver fully finished floors and painted walls. The project is categorized under NAICS code 238320 and is managed through the Texas Department of Transportation. Interested parties must note that the response deadline for this opportunity is December 1, 2026.

Texas Department of Transportation

POSTED

about 20 hours ago

DEADLINE

in about 2 months

Painting & FinishesThis subcontract opportunity is for painting and finishes services to support prime contractors on public works projects within the City of Imperial Beach, California. The scope of work involves applying interior and exterior surface coatings to achieve professional finished surfaces. Qualified applicants must hold a valid C-10 Painting license and provide verification from the Contractors State License Board. Additionally, registration with the Department of Industrial Relations is required in accordance with California Labor Code section 1725.5. The response deadline for this opportunity is January 1, 2027.

City of Imperial Beach, California

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Manufacturing of Special Emphasis Heavy Hex NutsThis subcontract involves the manufacturing of high-criticality Heavy Hex Nuts for prime contractors supporting NAVSUP Weapon Systems Support shipboard projects. The scope of work requires the fabrication of nuts according to Leslie Controls drawings 38650N, 36938N, and 38980N, utilizing either ASTM-A194 Grade 2H or Grade 7 steel. Deliverables include the finished hardware accompanied by Certificates of Compliance. Strict quality and technical standards must be maintained, including thread inspection per FED-STD-H28 and packaging in accordance with MIL-STD-2073. The performing entity must maintain an ISO 9001 quality system and ensure compliance with ANSI/ASQ Z1.4. This opportunity is categorized under NAICS code 332722 for the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-STD-2073 Packaging and Marking ServicesThis subcontract involves providing specialized preservation, packaging, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The scope of work requires strict adherence to MIL-STD-2073 packaging standards and the application of Item Unique Identification markings using laser etchers or equivalent equipment to ensure the durability of Special Emphasis material. The selected provider is responsible for delivering all finished products fully packaged and marked for FOB Destination shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Production Lot Destructive Testing for Shipboard NutsThis subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Manufacture of Special Emphasis Plain Round Nuts (NIIN 013397780 & 013397781)This subcontract involves the manufacture of high-precision plain round nuts, specifically NIIN 013397780 and 013397781, for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is required to fabricate the components according to NAVSEA Drawing 6602371 and TDP Version 003, while adhering to FED-STD-H28 for thread inspection and MIL-DTL-24252 to ensure zero weld repairs. Eligible providers must possess precision machining equipment and hold either ISO-9001 or MIL-I-45208 certification. Final deliverables must include the finished nuts accompanied by comprehensive certification data and DD Form 1423. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of Specialized Check Valves (VALVE, CHK SPCL42X46)This subcontract involves the manufacture of 10 specialized check valves, specifically model VALVE, CHK SPCL42X46 with NIIN 016665954, for prime contractors supporting Navsup Weapon Systems Support Mech. The fabrication process must strictly adhere to Cage Code IM994 and reference 2648038, utilizing precision machining equipment to ensure technical specifications are met. The contractor is responsible for full compliance with several military standards, including MIL-STD-130 REV N for marking and MIL-STD-2073 and MIL-STD-129 for packaging. Additionally, the project requires adherence to DFARS 252.204-7012 regulations. All units must be fully marked and inspected prior to delivery.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Manufacture of MIL-SPEC Electrical Plug ConnectorsThis subcontract involves the manufacture of high-reliability electrical plug connectors for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is responsible for fabricating connectors with NIIN 010463755, adhering strictly to TDP Version O04 and MIL-DTL-24231 specifications. Production requires the use of precision machining and molding equipment, and the contractor must maintain Special Emphasis Level I capability. All finished products must comply with MIL-STD-2073 packaging standards and be delivered FOB Destination to the Portsmouth Naval Shipyard. This Department of Defense requirement falls under NAICS code 335931, with a response deadline set for October 30, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 14 hours ago

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the preservation, packaging, and marking of finished subassemblies for prime contractors. All deliverables must be shipping-ready containers that strictly adhere to Navy standards, specifically utilizing MIL-SPEC materials and industrial marking equipment. Technical execution requires strict compliance with MIL-STD-2073 for packaging and MIL-STD-129 for marking, with a specific requirement for LEVEL 1 red markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS