Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CHANNEL, STRUCTURAL

Active
SPE8E4-26-T-1919Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of CHANNEL STRUCTURAL items with part number 6736828-1 and NSN 9520-01-570-4645, for a quantity of 18 units under solicitation SPE8E4-26-T-1919. The acquisition is governed by stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation issue date. Cybersecurity compliance is mandated at CMMC Level 2, requiring the vendor to be certified as a Third-Party Assessment Organization. The item involves technical data subject to export controls under either ITAR or EAR, restricting its disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies, and only contractors with JCP certification, completed DLA export control training, and approved access may handle the data. Distribution of government-identifiable information is restricted on non-accepted supplies, and removal protocols must be followed. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and delivery is required within 167 days after order. Performance is located in Tracy, California, 95304-5000. The NAICS code is 332312, classifying the acquisition under fabricated metal product manufacturing. The contracting office is DLA Dist San Joaquin under the Department of Defense, with Pamela Duffey as the primary point of contact, reachable via phone and email. The procurement is for a federal agency, with no set-aside designation. Access to detailed requirements and compliance documentation must be obtained through the official DLA eProcurement portal, and all contractors must adhere to the DLA export-controlled technical data protocols before engaging with the technical specifications.

General Info

Procure 18 CHANNEL STRUCTURAL units, CMMC Level 2 certified, ITAR/EAR controlled, JCP certified, delivery in 167 days, Tracy, CA.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE8E4-26-T-1919.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS

Full Description

Show more
CHANNEL,STRUCTURAL
CHANNEL<(>,<)> STRUCTURAL
53711 NAVAL SEA SYSTEMS COMMAND
P/N 6736828-1
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 9520-01-570-4645 Quantity: 18 EA Purchase Request: 7017585243QTY: 18 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

New
DIBBS
LIFE PRESERVER, VESTThe contract specifies the procurement of 2,300 life preserver vests, identified by NSN 4220-01-113-8665, under solicitation SPE8E6-26-Q-0584, issued by the Defense Logistics Agency Dist San Joaquin. This is a critical safety item designated by the Air Force, requiring strict adherence to all technical and quality standards, including SAE AS9100 for manufacturers and non-manufacturers. All items must be marked in accordance with MIL-STD-129, including the contractor’s and actual manufacturer’s CAGE codes, part number, lot number, and serial number if available. The vests are classified as a critical application item, and no waivers or deviations are permitted without explicit approval from the DSC contracting officer. The contract imposes a firm fixed price with zero variance in quantity, and inspection and acceptance occur at origin. Delivery is required within 90 days after award date, with packaging compliant to MIL-STD-2073-1E and special handling procedures for hazardous materials as outlined in STO ZD072. Compliance with updated federal hazard communication standards is mandatory, requiring suppliers to provide Safety Data Sheets (SDS) and labels conforming to 29 C.F.R. 1910.1200, replacing prior MSDS requirements. Suppliers must also ensure employee training on these updated hazardous communication protocols. Documentation for source approval, inspection, and removal of government identification from non-accepted items must be submitted per specified requirements. The item is governed by multiple referenced technical data packages, including revisions tied to CID A-A-50652, QAP 13873, and drawing number 98752 200415485. The delivery destination is the DLA warehouse in Tracy, CA, and all shipments must align with DLA transportation procedures. The contract was posted on July 22, 2026, with proposals due August 3, 2026, and the material is needed no later than July 27, 2026, for federal use.

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGALThe contract is for the procurement of 11 centrifugal fans under NSN 4140-01-174-4368 and part number C7V181Q-8CC, issued by DLA Dist San Joaquin under solicitation SPE8E7-26-T-3376. The requirement mandates strict adherence to DLA’s technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with packaging governed by MIL-STD-2073-1E and MIL-STD-129 for marking, while prohibiting plastic wrapping, cushioning, or dunnage wherever permissible. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA, and the goods must be delivered within 167 days of contract award, with an original required delivery date of December 24, 2026, and a need ship date of January 18, 2027. The unit of issue is each, with a fixed unit price of $11.00 and zero tolerance for quantity variance. The contract incorporates all applicable DLA packaging and documentation requirements, including the removal of government identification from non-accepted supplies and compliance with specified unit of issue codes. Packaging must align with RP001 and palletization standards, with no special marking required beyond standard MIL-STD-129 compliance. Transportation instructions reference DLAD Proc Notes C19 and C20, and the consignee address is clearly defined for delivery. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 333413 for industrial machinery manufacturing. The primary point of contact is Kelly Mitchell of DLA, reachable by phone or email, and all technical and quality clauses are bound by the version of the DLA Master List in effect on the solicitation issue date.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIALThis contract specifies the procurement of one axial fan impeller with part number 505551-1503 and NSN 4140-01-421-3618 under solicitation SPE8E7-26-T-3382, issued by the Defense Logistics Agency Distribution San Joaquin. The item must be delivered in a single unit within 167 days from the date of award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129, and must be palletized as specified. No mercury or mercury-containing compounds may be intentionally added to the product or come into direct contact with it, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals explicitly authorized by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the revision in effect at the solicitation issue date governs compliance. The unit of issue is each, the price is specified per unit, and the total contract value is based on the single unit quantity. The supplier must meet all special handling, packaging, and labeling guidelines, and the delivery must be completed no later than January 18, 2027, with the original required delivery date set for May 21, 2027. All transportation and shipping instructions must follow DLAD procedural notes C19 and C20, and the point of contact for inquiries is Kelly Mitchell of the DLA.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
VALVE PLATE ASSEMBLThe contract pertains to the procurement of a Valve Plate Assembly identified by NSN 4130-00-830-7676 and Part Number 5H40-120A, with a quantity of 26 units to be delivered FOB origin within 167 days of contract award. The item is subject to strict packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container types, with all marking required to comply with MIL-STD-129 and no special marking codes applied. Delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California, and inspection and acceptance occur at the destination. The contract prohibits any intentional introduction of mercury or mercury-containing compounds into the hardware except under narrowly defined exceptions such as functional uses in batteries, lighting, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendment dates. The purchase request number is 7017585202, unit price is $26.00, and total contract value is $676.00. The solicitation was issued under contract number SPE8E8-26-T-4830 with a response deadline of August 3, 2026, and is classified under NAICS code 333415. All materials must adhere to DoD unit of issue standards and government identification removal protocols for non-accepted supplies.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
MANIFOLD, CHARGING AThe contract pertains to the procurement of a MANIFOLD, CHARGING A with NSN 4130-00-814-0142 and part number AC855, under solicitation SPE8E8-26-T-4780, with a quantity of 26 units at a unit price of $26.00, totaling $676.00. Delivery is required FOB origin within 167 days of contract award, with a required ship date of January 18, 2027, and original delivery deadline of October 12, 2026. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements. All DLA Master List of Technical and Quality Requirements supersede any conflicting standards. The item must not contain intentionally added mercury or mercury compounds except in specific exempted uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals designated by NAVSEA; portable mercury-containing devices must be shockproof and include a secondary containment per NAVSEA 5100-003D. The delivery address is DLA DIST SAN JOAQUIN, REC WHSE 57, Tracy, CA 95304-5000. Transportation and freight specifications follow DLAD PROC NOTES C19 and C20. The contract enforces zero variance in quantity, and the unit of issue is each (EA). Technical and quality requirements are governed by the DLA Master List effective on the solicitation issuance date, with designated points of contact and compliance obligations outlined for the supplier.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
LIFE PRESERVER, UNDEThis contract is for the procurement of 81 units of the UNDERARM LIFE PRESERVER, identified by NSN 4220-01-524-5323 and part number TFSS-5326-C/GN, supplied by PECI FLOATATION LLC. The item is classified as a commercial product and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and hazardous material handling procedures outlined in RP001 and IP025, including special requirements tied to STO ZD072 for hazmat. The delivery is FOB destination with no variance allowed in quantity, and the contract requires delivery within 58 days to the designated receiving warehouse in Tracy, California. All hazardous materials associated with this item must be accompanied by Safety Data Sheets formatted in compliance with 29 C.F.R. 1910.1200 and OSHA’s Globally Harmonized System, along with approved HCS labels. Suppliers are required to train employees on these regulations and must not include asbestos as defined in FED-STD-313 or intentionally add mercury or mercury-containing compounds, except for specified functional uses in batteries, instruments, or weapon systems, where secondary containment and shockproofing are mandatory per NAVSEA 5100-003D. The contract mandates submission of documentation for source approval, and all supplies must eliminate government identification if rejected. The original required delivery date is October 31, 2026, with a need ship date of March 27, 2026, and the solicitation closed on August 3, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURALThis contract specifies the procurement of structural steel angle shapes with exact dimensions of 3.000 inches in height and width, 0.375 inches in thickness, and lengths ranging from 30 to 40 feet, weighing approximately 7.200 pounds per foot. The material is identified as steel UNS K02600 and must comply with ASTM A6 Table A2.7 for equal-legged L-shapes, with all requirements aligned to ASTM A6/A6M-24B and ASTM A36/A36M-19. Material must be supplied in whole-foot lengths only and marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination, and adhesive labels are required for items under 0.250 inches nominal OD. Certification of quality compliance, including mill material certification, is mandatory with each shipment, and copies must be forwarded to the DLA Troop Support Contracting Officer. The procurement is governed by strict compliance with the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official QSLD to be considered for award; any deviation constitutes an exception and must be explicitly declared. The government waives source inspection requirements for qualified suppliers, and failure to comply with QSLD terms may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and palletization must meet DLA packaging requirements. The item is designated a critical application, and the total quantity is 768 linear feet to be delivered within 69 days FOB origin to Tracy, CA, with a permitted quantity variance of plus or minus 10 percent. The contract references multiple technical data packages and quality assurance protocols, including CDRL-METALSCERT, and requires strict adherence to all DLA procurement notes and technical requirements as published in official DLA documentation.
Iron and Steel Forging

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDINGThe contract specifies the procurement of welding electrodes conforming to AWS A5.10 ER5356 specifications, with a nominal diameter of 0.030 inches, supplied on 1-pound rolls, packaged horizontally, and designed for direct current reverse polarity shielded arc welding. The item is identified by NSN 3439-00-892-4382 and a unit of issue of RL, with a total quantity of 307 rolls required. The product is classified as a commercial item and is procured under a military specification without shelf life restrictions. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The material must not contain intentionally added mercury or mercury compounds, except for specific exempted uses such as batteries or instruments, and any portable devices containing mercury must meet shock-proof and secondary containment criteria per NAVSEA 5100-003D. All hazardous materials supplied must be accompanied by Safety Data Sheets compliant with OSHA’s revised Hazard Communication Standard, including GHS-aligned labeling, and suppliers are required to submit both SDS and labels for contracting officer approval prior to award. Employee training on the updated hazard communication standards is mandatory. The contract solicitation number is SPE8E5-26-T-3670, issued by DLA Dist San Joaquin, with a response deadline of August 3, 2026, and delivery expected within 167 days after order. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Ira Hedgepeth.
Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details