Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Chem lab equipment maintenance

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Transportation, specifically the FAA William J. Hughes Technical Center, is forecasting a contract for the calibration and maintenance of analytical laboratory equipment. This requirement falls under NAICS code 811210 and is intended to ensure the operational accuracy and reliability of chemical laboratory instrumentation. The opportunity was posted on September 29, 2025, and is currently listed as a forecast. Interested parties may coordinate with Jeff Warner as the primary point of contact or Deborah Hemphill, the Small Business Specialist, for further information regarding this procurement.

General Info

FAA forecast for calibration and maintenance of analytical laboratory equipment under NAICS 811210.

Agency

Department of Transportation → FAA - William J. Hughes Technical Center

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

NJ, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 29

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of Transportation → FAA - William J. Hughes Technical Center

Contacts2 people available

OfficeN/A

Organization / AgencyDepartment of Transportation → FAA - William J. Hughes Technical Center

Office AddressN/A

Contacts

Jeff Warner

contact@example.gov

Deborah Hemphill

contact@example.gov

Full Description

Show more

Calibration & maintenance of analytical laboratory equipment

Similar Contracts

Same NAICS industry code

Electrical Equipment Acceptance Testing & Special InspectionsThis subcontract for Electrical Equipment Acceptance Testing and Special Inspections involves providing technical acceptance testing and IBC special inspections for prime contractors working on Tarrant Regional Water District industrial electrical equipment. The scope of work includes testing medium voltage cables, transformers, switchgear, VFDs, and MCCs, as well as performing settings coordination. The selected provider is responsible for delivering certified acceptance testing reports and IBC inspection certificates. To qualify for this engagement, personnel must hold NETA certification and IBC Special Inspector certification. The opportunity is categorized under NAICS code 811210 and is associated with Infrastructure Engineering in Texas. Interested parties must submit their responses by the deadline of November 19, 2026.

Infrastructure Engineering

POSTED

about 18 hours ago

DEADLINE

in about 1 month

LIPTM00415, RCIPT, FY25024-09, NECC PRP/FSR SPPT, NICHE SACThis new IDIQ contract, managed by NIWC Atlantic under the Naval Information Warfare Systems, seeks to provide technical support services for the Navy Expeditionary Combat Command. The primary objective is to deliver specialized support for fielded tactical radio systems, specifically focusing on NECC PRP/FSR support within the NICHE SAC framework. The performance of these services is designated for Norfolk, and the requirement is categorized under NAICS code 811210. Martha Leya serves as the primary point of contact for this forecast, which is intended to ensure the operational readiness and technical maintenance of critical communication systems.

POSTED

DEADLINE

RISO Certified Maintenance and Technical SupportThe RISO Certified Maintenance and Technical Support subcontract provides essential technical services for prime contractors working on California Department of Social Services projects. The scope of work includes performing quarterly preventive maintenance, executing firmware updates, and replacing original equipment manufacturer parts. To ensure operational continuity, the contractor must provide a 48-hour on-site response time for priority repairs and deliver detailed quarterly maintenance logs and support activity reports. Compliance requirements for this contract are stringent, necessitating that the provider holds RISO manufacturer certification. Additionally, all personnel must undergo vetting in accordance with SSA CSCRA requirements. This opportunity falls under NAICS code 811210 and is associated with the state of California, with a response deadline set for October 27, 2026.

California Department of Social Services

POSTED

DEADLINE

RISO Certified Installation and Network IntegrationThis subcontract involves the physical installation and network integration of RISO production printers for prime contractors supporting the California Department of Social Services. The scope of work includes hardware installation, the configuration of Fiery controllers, and the seamless integration of these units into the DDSD network environment. To ensure quality and security, the project requires manufacturer-certified technicians and strict adherence to the SSA Cybersecurity Supply Chain Risk Assessment standards. The selected provider is responsible for delivering comprehensive installation and performance test reports upon completion. This opportunity falls under NAICS code 811210 and is associated with a response deadline of October 27, 2026.

California Department of Social Services

POSTED

DEADLINE

Systems Maintenance and Warranty SupportThis subcontract for Systems Maintenance and Warranty Support involves providing essential technical services for cabling and Video Surveillance Systems (VSS) at Texas Department of Criminal Justice facility projects. The scope of work includes performing routine maintenance, troubleshooting, replacing faulty cameras and cables, and executing VSS software updates to ensure continuous system uptime and strict warranty compliance. Due to the sensitive nature of the work locations, all assigned personnel must successfully pass rigorous background checks to gain facility access. The selected provider is responsible for delivering detailed maintenance logs and ensuring all systems remain operational according to the established standards. The response deadline for this opportunity is November 9, 2026.

Texas Department of Criminal Justice

POSTED

DEADLINE

Replacement of Submersible Level Transducers

Solicitation # 27-0428-0508

The City of Newport News Public Works department is soliciting bids for the replacement of three submersible level transducers at its closed landfill located at 530 Atkinson Blvd, Virginia. The project requires the contractor to furnish, install, configure, calibrate, and test three new units, specifically the Dwyer/Mercoid Model SELTX-5-470 or an approved equal. These instruments must feature a 0 to 5 psi pressure range, a 470-foot integral shielded and vented cable, and a 4 to 20 mA direct-current two-wire output. The contractor is responsible for removing the existing end-of-life units and ensuring the new installations include necessary cable supports, desiccant, and vent protection labels. Final acceptance is contingent upon all three locations providing stable and reasonable readings and the submission of comprehensive documentation, including calibration records, warranty information, and test results. The contract will be awarded to the lowest responsive and responsible bidder based on the total quote. Performance must occur during normal City business hours, Monday through Saturday, and will continue until the project is complete. Payment terms are Net 30 days, and all deliveries are F.O.B. Destination. Contractors must maintain significant insurance coverage, including 1 million dollars for general and automobile liability and a 2 million dollar umbrella policy, with the City named as an additional insured. Additionally, bidders must provide a completed W-9, certify their business authorization in Virginia, and disclose their status regarding the Small, Women-Owned, Minority-Owned, and Service Disabled Veteran-Owned Business program.

POSTED

DEADLINE

Two-Way Radio Equipment Maintenance and RepairThis subcontract for Two-Way Radio Equipment Maintenance and Repair involves providing preventative maintenance and corrective repairs for emergency communication systems and radio hardware. Supporting prime contractors on City of Worcester projects, the selected provider will perform diagnostic testing, replace defective internal components, and execute firmware updates and calibrations to meet FCC standards using RF analyzers and signal generators. The final deliverables include fully operational radio equipment and detailed maintenance logs. The project is managed by the Massachusetts Purchasing Department and will be performed in Worcester, Massachusetts. Qualified candidates must hold valid FCC licensing and manufacturer-authorized service certifications. The solicitation was posted on October 9, 2026, with a response deadline of November 4, 2026.

PUR001 - Purchasing Department

POSTED

DEADLINE

Maintenance & Repair - Two-Way Radio Equipment / Emergency Communications

Solicitation # BD-23-1172-PUR00-PUR01-134368

The City of Worcester Purchasing Department is soliciting bids for the maintenance and repair of two-way radio equipment and emergency communications under solicitation number BD-23-1172-PUR00-PUR01-134368, also referenced as bid CR-8845-J7. This open market procurement is categorized under NAICS code 811210 and UNSPSC code 83-11-19 for radio services. The scope of work focuses on providing essential maintenance and repair services to ensure the functionality of emergency communication systems within Worcester, Massachusetts. The bid was posted on October 9, 2026, with a response deadline and bid opening scheduled for November 4, 2026, at 10:00 AM. Electronic quotes are not permitted for this solicitation. Jerry Kucera serves as the primary purchaser, while Chris Gagliastro is the designated contact for shipping and billing at City Hall. While the solicitation establishes the requirement for these services, specific pricing, contract value, and detailed performance periods are not provided in the available documentation.

PUR001 - Purchasing Department

POSTED

DEADLINE

REBUILT, LOGIC I/F PANEL (B-EN | 2101327

Solicitation # 2101327

Solicitation 2101327 is issued by the Dallas Area Rapid Transit Authority for the procurement of a rebuilt logic interface panel. The solicitation was posted on October 9, 2026, with a response deadline of October 16, 2026. All bids must reflect FOB Destination shipping terms with freight costs included in the overall price, as the Authority typically rejects FOB Origin or Prepay and Add terms. Delivery timing and rates are considered critical, and failure to meet specified schedules may result in rejection or termination for default. The contract is governed by the Authority's proprietary Purchase Order Terms and Conditions rather than standard FAR clauses. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate and include detailed information such as the purchase order number, item descriptions, quantities, and unit prices. Sellers must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have not provided gratuities to Authority officials. Additionally, the Seller is required to adhere to equal opportunity employment practices and warrants that all provided supplies are of merchantable quality and suitable for their intended purpose.

Dallas Area Rapid Transit

POSTED

DEADLINE

Dimensional Tool Calibration (Gauges, Calipers, UCAD)This subcontract involves providing high-precision dimensional calibration services for measurement tools used by prime contractors on Mississippi Department of Public Safety projects. The scope of work includes the calibration of seven gauge blocks, three calipers, and four to five UCAD units utilizing specialized equipment such as laser interferometers, optical flats, or high-precision surface plates. To qualify for this engagement, the service provider must hold ISO/IEC 17025 accreditation specifically covering dimensional metrology. The primary deliverable for these services is the provision of formal calibration certificates. The solicitation was posted on October 9, 2026, with a response deadline of November 10, 2026, under NAICS code 811210.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Centrifuge, Autoclave, and Pressure/Flow CalibrationThis subcontract involves the calibration and certification of mechanical laboratory equipment and pressure and temperature tools for prime contractors supporting the Mississippi Department of Public Safety. The scope of work includes the calibration of 36 centrifuges, 6 autoclaves, pressure gauges, flow meters, and thermometer eutectics utilizing tachometers and pressure calibrators. The selected provider must deliver detailed calibration certificates and performance reports upon completion. A critical requirement for this engagement is that the contractor must hold ISO/IEC 17025 accreditation for the specific equipment types being serviced. The project falls under NAICS code 811210, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Balance, Pipette, and Volumetric Glassware CalibrationThis subcontract for the Mississippi Department of Public Safety involves the precision calibration of weighing and liquid handling equipment for prime contractors. The scope of work includes the calibration of 70 balances, 11 scales, 162 pipettes, and 32 graduated cylinders. All services must be performed using NIST-traceable weights and gravimetric testing equipment, with the final delivery requiring individual calibration certificates for every instrument. To be eligible, the provider must hold ISO/IEC 17025 accreditation specifically covering mass and volume calibration. The project falls under NAICS code 811210, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

More opportunities from Department of Transportation → FAA - William J. Hughes Technical Center

Same awarding agency

Graphics and Multimedia Production Contract The Department of Transportation, specifically the FAA William J. Hughes Technical Center, is forecasting a contract for comprehensive graphic arts, multimedia design, and photography services. This procurement is categorized under NAICS code 541430 and is designated as a set-aside for the Women-Owned Small Business Program. The opportunity was posted on March 20, 2026, and is currently listed as a forecast. Interested parties may coordinate with point of contact Ken Hitchens or Small Business Specialist Deborah Hemphill for further information regarding this requirement.

Graphic Design Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS