Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHEST, TOOL KIT

Active
SPE4A7-26-T-578EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of five Chest, Tool Kit units from PELICAN PRODUCTS, INC. with part number 0450SD4 and NSN 5140016993716, at a unit price of $5.00 for a total value of $25.00. Delivery is required within 81 days FOB origin, with inspection and acceptance occurring at the destination. The items must be packaged and preserved in strict compliance with MIL-STD-2073-1E, Appendix D for kits, including proper cushioning, prevention of internal movement, and inclusion of a detailed contents list per kit. Packaging must conform to MIL-STD-129 for marking and barcoding, with no special marking required. Palletization and overall packaging follow DLA’s official requirements, and each unit must be contained in a single, robust box sufficient to prevent damage. The delivery address is the DLA Distribution facility in New Cumberland, PA, with the original and needed ship date set for October 14, 2026. The contract incorporates technical and quality requirements identified by R and I numbers from the DLA Master List, and sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. All units are subject to the specified quality assurance provisions, with attributes assigned verification levels or AQLs as defined. The solicitation number is SPE4A7-26-T-578E, issued under a federal procurement framework with no set-aside classification.

General Info

Procure five Chest Tool Kits, part 0450SD4, $5 each, deliver by Oct 14, 2026, to New Cumberland, PA, per MIL-STD-2073-1E and MIL-STD-129.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-578E DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Hannah Leonard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHEST,TOOL KIT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CHEST,TOOL KIT
PELICAN PRODUCTS, INC. 65442 P/N 0450SD4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528398 0001 EA 5.000
NSN/MATERIAL:5140016993716
DELIVERY (IN DAYS):0081
DELIVER FOB: ORIGIN
SPE4A7-26-T-578E
SECTION B
PR: 7017528398 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW NSN PACKAGING REQUIREMENTS, THEN MARKED IAW MIL-STD-129. PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT. CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH BOXED KIT MUST CONTAIN A CONTENTS LIST CONSISTING OF COMPONENT PART NSNS, PART NUMBER AND QUANTITY PER KIT. BOX SHALL BE MARKED AND BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/14/2026 Original Required Delivery Date:10/14/2026
SPE4A7-26-T-578E
SECTION B
PR: 7017528398 PRLI: 0001 CONT’D

SPE4A7-26-T-578E NSN/Part Number: 5140-01-699-3716 Quantity: 5 EA Purchase Request: 7017528398QTY: 5 Delivery: 81 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
WINDOW, DIALThe contract involves the procurement of six WINDOW DIAL units under NSN 5355-01-654-5859, with a delivery requirement within 31 days of award. The solicitation number is SPE7L5-26-T-4310, issued on July 17, 2026, with responses due by July 22, 2026, and is managed by the Department of Defense under the Land Supplier Ops Engines organization. The place of performance is identified as New Cumberland, Pennsylvania with a zip code of 17070-5002, and the primary point of contact is Paul Doerfler, reachable via email and phone. This procurement operates under the DLA Packaging Requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which are accessible online; the applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The NAICS code is 332119 and the acquisition type is federal, with no set-aside designation. The contract mandates the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS ENGINES

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332119
New
Federal
PLUG,MACHINE THREADThis contract pertains to the procurement of a machine thread plug designated as SPECIAL EMPHASIS material (Level I), critical to a shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The item must be manufactured strictly in accordance with Naval Sea Systems Command drawing 6758076 and associated liability ER2643-820-23C4, with material specified as ASTM-B139, UNS C51000, Temper H04. All materials require full traceability from raw stock to finished component, with mandatory heat-lot or traceability markings permanently affixed in compliance with MIL-STD-792, and must be accompanied by certified chemical and mechanical test reports that meet exacting standards. Electronic submission of Objective Quality Evidence (OQE), including certifications and test data, is required via the Wide Area WorkFlow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286 for shipping, inspection, and acceptance, with a mandatory notification email to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped until formal acceptance is granted. The contract mandates a comprehensive quality assurance program requiring ISO-9001 with ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025 compliance, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662, with all processes subject to government inspection at source. Welding and brazing must follow S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with prior submission and approval of weld procedures and qualification data. All weld filler metals require certification of LOT numbers and conformity to specification, and electronic signatures on documentation are permitted with strict controls to ensure authenticity and prevent tampering. Final inspection demands 100% verification of traceability, certification legibility, and compliance with zero defect acceptance criteria, with sampling guided by ANSI/ASQ Z1.4 unless otherwise specified. The order is DO-rated under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, and subject to a one-year warranty from date of delivery. The contract also enforces Buy American Act compliance, mercury-free requirements, and strict configuration control, requiring Engineering Change Proposals for any modifications impacting form,
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332119
New
DIBBS
Precision Spacer Sleeve SupplyThe contract requires the manufacture or supply of 16 precision spacer sleeves identified by NSN 5365017364566, engineered to meet exact federal specifications for form, fit, and function, ensuring seamless integration into military systems. Full compliance documentation must be provided to verify adherence to all technical and quality standards, with no deviations permitted. The work is classified as a subcontract under NAICS code 332119, indicating it falls within miscellaneous fabricated metal product manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is designated for New Cumberland, Pennsylvania, with the zip code 17070-5002 as the sole place of delivery or execution. All bids must be submitted by the response deadline of July 24, 2026, with the solicitation posted on July 16, 2026, allowing potential suppliers a precise eight-day window to prepare and respond. The contract does not specify a set-aside type, meaning it is open to all qualified vendors regardless of business size or ownership status. There is no designated point of contact listed, and the official solicitation details can be accessed via the provided DIBBS link, which serves as the authoritative source for submission instructions and technical requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
Manufacture and Supply of Straight Spacer ComponentsThe contract requires the manufacture, packaging, and delivery of 2,381 straight spacer components that must fully comply with Department of Defense military standards and technical specifications. These components are intended for use in defense-related applications and must be produced to exacting quality and performance criteria. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002 serving as the official place of performance. The contract is classified as a subcontract under the NAICS code 332119, indicating it falls within the category of other fabricated metal product manufacturing. All submissions must be received by the deadline of July 24, 2026, with the solicitation posted on July 16, 2026, providing a limited eight-day window for potential suppliers to respond. The awarding organization is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with no specific point of contact listed for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
Precision Metal Component SupplyThe contract involves the manufacture and supply of a precision metal knob identified by NSN 5355014413961, adhering strictly to military specifications and federal supply chain requirements. The component must comply with all applicable packaging, labeling, and marking standards mandated for defense logistics, ensuring full traceability and readiness for military deployment. Performance of the work is designated for Tracy, California, with a delivery schedule aligned to the Defense Logistics Agency’s operational needs. The solicitation is structured as a subcontract under NAICS code 332119, indicating it pertains to other fabricated metal product manufacturing, and was posted on July 16, 2026, with responses due by July 27, 2026. All parties must meet Defense Department compliance protocols, including quality assurance, documentation, and supply chain integrity, and the award will be managed under the Land Supply Chain organization within the Department of Defense.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract solicitation SPE4A7-26-T-578P issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV requires the supply of nine spacer sleeve units with NSN 5365-01-733-6668, priced at $9.000 per unit for a total contract value of $81.00. Delivery is mandated to occur no later than 250 days after order issuance, with an original required delivery date of April 1, 2027, under FOB origin terms, meaning title and risk of loss transfer to the Government upon delivery to the carrier at the contractor’s location. All items must be shipped to the designated destination at DDSP New Cumberland Facility in New Cumberland, PA, where government inspection and acceptance will occur. Packaging must strictly conform to MIL-STD-2073-1E with specified preservation, wrapping, and container codes, and palletization must meet DLA’s RP001 requirements. Marking and labeling adhere to MIL-STD-129, with no special marking required and bare item identification complying with RQ017. Sampling and inspection protocols require compliance with MIL-STD-1916 or comparable zero-based sampling plans, with acceptance criteria mandating zero non-conformances in sampled lots unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The contract includes numerous FAR and DFARS clauses addressing cybersecurity safeguards including NIST SP 800-171 compliance and safeguarding covered defense information, prohibitions on hexavalent chromium and forced labor, trafficking in persons, employment eligibility verification, sustainable product use, and hazardous material handling under 29 CFR 1910.1200. Transportation by sea is subject to the use of U.S.-flag vessels under DFARS clause 252.247-7023, and electronic invoicing is required through WAWF. Offerors must possess a valid UEI and CAGE code, provide socioeconomic certifications including HUBZone, SDVOSB, or WOSB status where applicable, and disclose use of covered defense telecommunications equipment. The solicitation emphasizes automated acquisition under simplified procedures and appears structured for a Lowest Price Technically Acceptable award, with full compliance with DLA technical and
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract pertains to the procurement of 2,381 units of SPACER, STRAIGHT with NSN 5365-01-643-8595 under solicitation SPE4A7-26-T-578D, issued by the Department of Defense’s DLA Aviation ASC Supplier Operations AE and AF Division. The item must be delivered FOB origin within 126 days of the as-directed order, with an original required delivery date of October 14, 2026, and a need ship date of November 28, 2026. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The total estimated contract value is $5,668,561 at a unit price of $2,381.000 per unit, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including preservation method 33 (cling/dry), no wrap or cushioning materials, and unit container BL. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging requirements. All items must be permanently and legibly marked per RQ017 for bare item identification. Quality assurance requires sampling to be conducted using MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with acceptance criteria mandating zero non-conformances unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. The supplier must comply with DLA’s Master List of Technical and Quality Requirements referenced via the provided web link, and revisions in effect on the solicitation issue date control for simplified acquisitions. The contract incorporates multiple FAR and DFARS clauses covering equal opportunity, combating human trafficking, employment eligibility, hazardous material identification, sustainable products, safeguarding information systems, changes, transportation by sea, export controls, and NIST SP 800-171 compliance. Contractors must submit Safety Data Sheets pre-award and notify the government of any changes in material composition. Hazardous materials must be labeled per OSHA Hazard Communication Standard, and
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract is for one spacer plate identified by NSN 5365-01-716-1120 and part number 752-7068505-108, with a required delivery within five days of contract award and a specified original delivery date of May 21, 2026. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for packaging, marking, and inspection including compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-1916 or ASQ H1331 for sampling, where acceptance requires zero non-conformances unless otherwise stated. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, and unspecified attributes default to major. The item must be delivered FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must follow DLA packaging requirements and palletization standards, with no special marking required. Shipping must be by the fastest traceable means, explicitly prohibiting parcel post, and is directed to the Electric Boat Corporation facility in N Stonington, CT. The contract is issued under solicitation SPE4A7-26-T-576S, with the unit of issue as a single piece, a total price of one dollar, and government-specific identifiers for tracking, including a supplier address code, project code, and delivery instructions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract pertains to the procurement of a BUSHING, SLEEVE with NSN 5365-01-703-2625 and part number NAS77C14-030, manufactured in accordance with the basic non-government standard NAS77 Revision 16 dated 12/31/2025. A total of 58 units are required at a unit price of $58.00, resulting in a total contract value of $3,364.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings required. Palletization adheres to DLA standards and units are to be delivered FOB origin with zero tolerance for quantity variance. Inspection and acceptance occur at the destination. The delivery window is 71 days, with a need ship date of October 4, 2026, and original required delivery by January 14, 2027. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. Primary point of contact is Tasia Carney at DLA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract is for a single spacer plate identified by NSN 5365-01-715-1767 with a delivery requirement of five days after order award. It is issued under solicitation SPE4A7-26-T-575U by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in N Stonington, Connecticut. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons anywhere, including U.S. subsidiaries and employees; compliance with DFARS 252.225-7048 is required. Contractors must hold a valid US/Canada Joint Certification Program credential, complete DLA’s mandatory training on handling export-controlled data, and gain formal approval from the DLA controlling authority to access such data. Additional requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of the bare item, and a CMMC Level 2 self-assessment or certified third-party assessment. The solicitation closes on July 24, 2026, with the response deadline set at 17:00 UTC, and the primary point of contact is Renee Bynum at renee.bynum@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract pertains to the procurement of one spacer ring with NSN 5365-01-667-0920 under solicitation SPE4A0-26-T-3901, requiring delivery within five days to Camp Pendleton, California, FOB destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which take precedence over other standards like ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with all items marked and labeled according to specified government standards, including physical identification of bare items. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. The unit of issue is each, with no tolerance for quantity variance. Shipment must be sent via fastest traceable means, excluding parcel post, to the designated freight address, and the item is subject to inspection and acceptance at the point of delivery. The contract specifies a required delivery date of July 13, 2026, and includes government-only codes for tracking and distribution management.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAININGThis contract is for the procurement of one retaining ring, identified by NSN 5325-01-705-5595 and part number 18923-ITEM-4, issued under solicitation SPE4A6-26-T-06XN by the Department of Defense’s ASC Commodities Division. The item must be delivered within 20 days to FPO AE 09592-1200, with delivery terms FOB origin and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and no special marking. All packaging, preservation, and marking materials must be free of mercury or mercury compounds, with exceptions narrowly limited to functional uses in batteries, fluorescent lights, sensors, weapon systems, or Navy-specified reagents, and portable mercury-containing devices must have shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise specified. The contractor must adhere to DLA packaging requirements, and the item is subject to technical and quality requirements referenced via R and I numbers from the DLA Master List. The shipment must be sent via the fastest traceable method, not parcel post, and transportation instructions follow DLAD procedural notes C19 and C20. The contract includes government-only fields for tracking and logistics, with the original delivery requirement set for June 10, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.
Engineering Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Government Surplus Property Handling & Repackaging ServicesThe contract seeks services to inspect, validate, repack, and document surplus government property for reuse or resale, ensuring strict adherence to federal labeling standards and chain-of-custody requirements. All activities must maintain regulatory compliance throughout the handling process, with a focus on preserving the integrity and traceability of items from intake to final disposition. This includes accurate documentation and proper packaging to meet federal guidelines, enabling seamless transition of materials into secondary markets or internal reuse programs. The solicitation falls under NAICS code 493190 and is classified as a subcontract, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 17, 2026, with responses due by July 29, 2026. While specific location details for performance or contact points are not provided, bidders must be prepared to support operations in alignment with DOD protocols and ensure full transparency in all handling procedures. The work is critical to maximizing the value of surplus assets while maintaining accountability across the federal supply chain.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Fuel Line ComponentsThe contract involves the precision machining of a slider block intended for use in a fuel line assembly, requiring strict adherence to military specifications, approved technical data packages, and established quality standards. The component must be manufactured to exacting tolerances to ensure reliability and performance in demanding operational environments, with all processes and materials subject to rigorous inspection and documentation protocols. This subcontract falls under NAICS code 332613, indicating it is for other machine shop services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided, suggesting the contractor will coordinate directly with the procuring activity to finalize logistics and deliverables. Full compliance with technical requirements and quality assurance measures is mandatory, and failure to meet these standards may result in rejection or contract termination.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.
All Other Plastics Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details