Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

CHIP, VINYL CHLORIDE

Active
SPE2DS-26-T-220SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a single unit of CHIP, VINYL CHLORIDE containing ten measurement capillaries pre-filled with a reagent detection system designed for use with the CMS analyzer, with a measurable range of 10.0 to 250 ppm and intended for ten tests. It is identified by NSN 6550-01-530-8344 and is subject to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed in a container that protects against damage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the designated delivery point. Labeling must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number. This item has a non-extendable shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Shelf-life markings must conform to the latest revision of MMS1C. The procurement is governed by solicitation SPE2DS-26-T-220S, with a response deadline of July 15, 2026, and a required delivery within 20 days of award. The item falls under NAICS code 621410 and is managed by the Department of Defense's Medical Supply Chain, with deliveries to APO, zip code 09094-3219. Covered defense information may apply, and government identification must be removed from non-accepted supplies. Packaging requirements are defined by DLA standards, and technical documentation referenced through R or I numbers is fully incorporated by reference from the DLA website.

General Info

One unit of VINYL CHLORIDE procured by DLA under solicitation SPE2DS-26-T-220S, NSN 6550-01-530-8344.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

UNIT 2497 CP 011 496 371 46 2418, APO, AE, 09094-3219, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-220S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS

Full Description

Show more
CHIP,VINYL CHLORIDE
CHIP, VINYL CHLORIDE
CONTAINS TEN MEASUREMENT CAPILLARIES FILLED WITH A SUBSTANCE-SPECIFIC
REAGENT DETECTION SYSTEM, MEASURING RANGE 10.0-250 PPM, 10 TESTS; FOR
CMS ANALYZER
UNIT OF ISSUE EA (EACH)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DS-26-T-220S
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-530-8344 Quantity: 1 EA Purchase Request: 7017434742QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 621410
New
DIBBS
CHIP, HYDROCHLORIC AThe item is a CHIP, HYDROCHLORIC A, containing ten measurement capillaries pre-filled with a reagent specific for hydrochloric acid testing, designed for use with the CMS analyzer and capable of performing ten tests within a measurement range of 20.0 to 500 PPM. Each unit is sold individually and must be packaged in commercial-grade sealed containers that protect against damage or breakage, with exterior shipping containers meeting commercial standards to ensure safe and cost-effective delivery to the specified point of delivery in APO, 09094-3219. All packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must include the date of manufacture, expiration or retest date, and the contract or lot number, adhering to MMS1C labeling requirements. The item is classified as a TYPE I (CODE M) medical supply with a non-extendable shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of government delivery. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, and covered defense information provisions apply. Packaging must meet DLA procurement standards, and government identification must be removed from non-accepted supplies. This solicitation, issued under SPE2DS-26-T-220Y, targets a single unit delivery within five days of award, with a NAICS code of 621410 and is managed by the Department of Defense's Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 621410
New
DIBBS
CHIP, SULFUR DIOXIDEThe contract is for a single unit of a CHIP containing ten measurement capillaries, each pre-filled with a sulfur dioxide-specific reagent detection system designed for use with the CMS analyzer, capable of measuring concentrations from 5.0 to 150 parts per million. This item is classified as a Type I (Code M) medical supply with a non-extendable shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must clearly display the date of manufacture, expiration or retest date, contract number, and lot number. The product must be packaged in sealed unit containers that prevent damage or breakage and shipped in commercial exterior containers suitable for safe delivery by common carrier at the lowest cost, with export packaging applied as necessary. The item is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under RA001, and the packaging is subject to DLA packaging requirements under RP001. Government identification must be removed from non-accepted supplies as per RQ011, and the item is subject to Covered Defense Information provisions under RD003. The solicitation number is SPE2DS-26-T-221C, with a response deadline of July 15, 2026, and delivery required within five days of award to APO 09094-3219. The NSN is 6550-01-530-8357, and the point of contact is Tiffany Parker of the Department of Defense, Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details