This Solicitation opportunity from Department Of Defense was posted on July 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CHUTE, AMMUNITION

Closed

SPE7L1-26-T-798RFederal

Submission Closed07/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332994

New

DIBBS

Supply of FN Herstal Gun Mount PedestalThis subcontract involves the procurement and delivery of one FN Herstal S.A. gun mount pedestal, specifically part number 3634200650 and NSN 1010131231283, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the contractor to perform marking and labeling according to MIL-STD-129 and provide comprehensive quality assurance documentation to meet Critical Application Item standards. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 332994. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Warning Streamer / Ground Safety PinsThis subcontract involves the manufacture of 56 Warning Streamer Pins, identified by NSN 1730-00-784-9258, for prime contractors supporting Department of Defense DLA supply contracts. The fabrication process must strictly adhere to Reference Drawing 76823 10Y203 Revision D, with identification markings applied according to MIL-STD-130N. Quality assurance is managed through zero-based sampling plans as specified in MIL-STD-1916 or ASQ H1331. The performing entity must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The work is categorized under NAICS code 332994 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Automatic Gun Barrels (NSN 1005-00-787-9802)This subcontract involves the supply of 225 automatic gun barrels, identified by part number 1005-00-787-9802, for prime contractors working on Department of Defense procurement projects. Managed by the DLA Weapons Support Land Supply Chain, the contract requires the manufacturer to utilize precision machining to ensure all units strictly adhere to Form, Fit, and Function technical data requirements and government military hardware packaging standards. Eligible suppliers must possess a valid CAGE code and maintain full compliance with FAR 52.222-20. The procurement falls under NAICS code 332994, with a response deadline set for November 9, 2026. Performance of the contract will be centered in the 17070-5002 zip code area.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Small Arms Cartridge FollowerThis subcontract involves the manufacturing of small arms cartridge followers for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for fabricating components that strictly adhere to NSN 1005013589718 specifications and DLA Master List technical requirements. Production must be carried out using precision machining, as the use of additive manufacturing is explicitly prohibited for this project. Compliance requirements are stringent, necessitating a CMMC Level 2 self-assessment and adherence to the Buy American Act, the Berry Amendment, and Category I Demilitarization standards. The performance of the contract will take place in Austin, Texas, with a response deadline set for November 9, 2026. The final deliverable is the completed cartridge follower meeting all specified defense standards.

Defense Logistics Agency

POSTED

DEADLINE

Supply of XM40 Riot Control Agent Simulator DispersersThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture or procurement of 229 XM40 Riot Control Agent Simulator Dispersers for Department of Defense prime contractors. The provider must ensure all hardware meets NSN 1040-01-501-4423 specifications, conduct origin inspections, and coordinate testing witnessed by government representatives. Performance will take place in New Cumberland, Pennsylvania. Strict regulatory and security standards apply to this engagement, including mandatory CMMC Level 2 certification and full compliance with ITAR, EAR, and the Buy American Act. Additionally, the contractor is responsible for the specialized handling of UN1950 hazardous materials. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fiberlock (NSN 5342-01-052-1023)This subcontract involves the manufacture or procurement of 313 Fiberlock hardware units under NSN 5342-01-052-1023 for prime contractors supporting the DLA Weapons Support ASC. The selected provider must ensure all items are inspected according to MIL-STD-1916 or ASQ H1331 and adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packing and marking. Final delivery of the inspected units is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To qualify for this contract, the supplier must maintain SAE AS9003 or ISO 9001 certification and demonstrate full compliance with ITAR and EAR regulations. The project falls under NAICS code 332994 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Small Arms Storage Rack ManufacturingThis subcontract involves the manufacture and supply of a single small arms storage rack for prime contractors supporting DLA Weapons Support. The fabrication must strictly adhere to the technical and quality requirements specified under NSN 1095-01-561-5431 and RA001. To ensure regulatory compliance, the provider must follow the Buy American Act and the Berry Amendment, and the use of additive manufacturing is prohibited without explicit authorization. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this requirement categorized under NAICS code 332994.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Combat Knife Production and SupplyThis subcontract involves the manufacture and supply of 2,580 combat knives for prime contractors supporting the Department of Defense DLA Weapons Support Strategic Acq Program Directorate. The required products must meet NSN 1095-01-466-8569 and correspond to specific part numbers from Benchmade, Fiskars, or Hogue. The contractor is responsible for ensuring strict adherence to RA001 technical requirements and DLAD Procurement Note C03 for supply chain traceability. This opportunity falls under NAICS code 332994, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1562

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2273

Solicitation SPE4A7-27-T-2273 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 313 units of Fiberlock, identified by NSN 5342-01-052-1023. The contract is established as FOB Origin with a required delivery date of December 31, 2026, and a need ship date of February 12, 2027, for delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and inspection standards, requiring inspection and acceptance at the origin. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling shall follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. The contract includes significant regulatory requirements, including export controls under ITAR and EAR, and prohibits the use of additive manufacturing unless specifically authorized. Environmental compliance is mandatory, specifically the prohibition of mercury or mercury-containing compounds in hardware and packaging per IP056. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. Administrative processes, including invoicing and receiving reports, are to be managed through the Wide Area WorkFlow system. Additionally, the solicitation incorporates the Buy American Act and DFARS regulations regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2897

Solicitation SPE7L1-27-T-2897 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 20 ammunition chutes, identified by NSN 1005-01-646-5943. The items must be manufactured in accordance with Basic Drawing NR 30003 3392AS622, Revision dated November 25, 2014. Delivery is required within 178 days after receipt of order, with a specified need ship date of May 7, 2027. The place of performance and delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, utilizing First Destination Transportation to optimize shipping costs. This contract contains stringent regulatory requirements, including demilitarization standards for small arms weapons and parts under DODM 4160.28-Vol.3 and export controls governed by ITAR and EAR. Technical data access is restricted to DLA contractors with approved US/Canada Joint Certification Program certification and completed export-control training. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging and marking must adhere to ASTM D3951 and MIL-STD-129, while electronic invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2894

Solicitation SPE7L1-27-T-2894 is a request for quotations from the DLA Weapons Support Land Supply Chain for 153 units of trigger extensions (NSN 1005-01-040-8836). Designated as a critical gun part, the item is classified as a defense article subject to ITAR and the Arms Export Control Act, requiring manufacturers to register with the Directorate of Defense Trade Controls. The procurement is a total small business set-aside with a delivery deadline of February 14, 2028, shipping FOB Origin to Tracy, California. Technical requirements specify the use of manganese coating if an option for zinc is provided and prohibit the use of Class I ozone-depleting chemicals. Quality assurance is stringent, requiring contractor first article testing and product inspection by the DCMA QAR at the manufacturer's facility. Certificates of conformance are not authorized, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract incorporates various FAR and DFARS clauses, including CMMC Level 2 certification, Wide Area WorkFlow for invoicing, and strict adherence to the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract pertains to the procurement of five units of a chute designated for ammunition handling, identified by the NSN 1005-01-221-0428. This solicitation, issued under number SPE7L1-26-T-798R by the Defense Logistics Agency on behalf of the Department of Defense, was posted on July 6, 2026, with a response deadline of July 17, 2026. The acquisition is classified as a federal solicitation with no specified set-aside provisions or NAICS code, indicating it is open to general competition without restrictions based on business size or classification. The place of performance and office address details are unspecified, but the contracting authority is based in the United States. Interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered for award.