Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CIRCUIT BREAKER

Active
SPE7M5-26-T-366JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits five circuit breakers identified by NSN 5925-01-019-0980 under solicitation number SPE7M5-26-T-366J, with a delivery deadline of 157 days after award. The item is governed by source-controlled technical data, specifically Drawing 204-15847 Revision G dated 04/08/1997, and must strictly comply with its requirements regardless of part number listings. Only approved sources listed on the drawing may supply the item, though additional approved sources not yet reflected on the drawing may be considered. The use of any Class I ozone-depleting substances in any phase of design, manufacturing, or testing is prohibited unless explicit written approval from the contracting officer is obtained, and this restriction overrides any conflicting specification requirements without waiving performance standards. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and prior authorization from DLA. The contractor must also be certified under Cybersecurity Maturity Model Certification (CMMC) Level 2. All technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The solicitation closes on August 14, 2026, and the point of contact for inquiries is Matthew Stanko at the Defense Logistics Agency’s Active Devices Division.

General Info

Five circuit breakers due in 157 days, must comply with Drawing 204-15847 Rev G, ITAR/EAR controlled, CMMC Level 2 certified, no ozone-depleting substances.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335313 - Switchgear and Switchboard Apparatus ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-366J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT BREAKER
CIRCUIT BREAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Source Control Item. Cage 82647. Drawing 204-15847. Revision G. Revision Date 04/08/1997. NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBEREDONLY ITEMS. SOURCE CONTROL THE TECHNICAL DATA CITED IN THIS SOLICITATION IS NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST MEET THE REQUIREMENTS OF THE CITED TECHNICAL DATA IN ADDITION TO THE REQUIREMENTS OF THE PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2
SPE7M5-26-T-366J
SECTION B
Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5925-01-019-0980 Quantity: 5 EA Purchase Request: 7017602948QTY: 5 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335313
New
DIBBS
High-Reliability Motor Starter Supply for Naval VesselThe contract specifies the supply of a single high-reliability motor starter, identified by NSN 6110012999272 and part number CR306B004ZABB, intended for use aboard the USNS COMFORT. The item must meet all applicable military standards for packaging, labeling, and hazardous materials handling to ensure safe transport and operational readiness in naval environments. The requirement is issued under a subcontract mechanism with a NAICS code of 335313, indicating it falls within the category of electric lighting and electrical equipment manufacturing. Performance is designated to occur at FPO, with the zip code 09566, reflecting a military postal address associated with overseas or shipboard delivery. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the procuring agency listed as the Maritime Supply Chain under the Department of Defense. All deliverables must comply fully with defense logistics and regulatory frameworks without exception.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M0-26-T-015K
The contract is for a single rotary switch with NSN 5930-01-619-0800, under purchase request 7017559756, requiring delivery within five days after award. The solicitation number is SPE7M0-26-T-015K, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item is to be delivered to FPO, ZIP 34094, and the contracting office is the Maritime Supply Chain ESOC Buys under the Department of Defense. Primary point of contact is Laurie Wassmuth, reachable via email or phone. The NAICS code is 335313, and the solicitation is classified as federal with no set-aside designation.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
HANDLE, MANUAL CHARG
Solicitation # SPE7M2-26-T-5981
The contract pertains to the supply of 21 units of a manual charge handle with NSN 5925-00-622-2294 under solicitation SPE7M2-26-T-5981, issued by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 157 days after award, and responses must be submitted by August 14, 2026. The procurement is governed by DLA packaging requirements and incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except in specific exempted cases such as functional uses in batteries, fluorescent lights, instrument sensors, weapon systems, or chemical reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. The offeror must provide a complete data package covering both the approved and alternate parts, as no data is currently available for this item. The place of performance is designated as New Cumberland, PA, with David Larsen as the primary point of contact for inquiries.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-326C
The contract is for the procurement of circuit breakers with NSN 5925012256809 and part numbers L454C2001-3-010 and L454C2001-3-022 from The Boeing Company and 2TC61-10 from Sensata Technologies Inc., totaling seven units. Delivery is required within 14 days of award, shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing them over ASTM D3951. Nonhazardous items must be commercially packaged per ASTM D3951, while hazardous items must follow Fed-Std-313 and TQ requirement IP025. All packaging and labeling must conform to MIL-STD-129 and DLA Packaging Requirements RP001, with unit of issue as EA and quantity per unit pack specified. Palletization must adhere to RP001 standards. The delivery address is DLA Distribution Depot Oklahoma at Tinker AFB, and the required ship date is March 3, 2026, with an original delivery date of January 28, 2026. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-T-326C, with a response deadline of August 6, 2026, and the NAICS code is 335313. Primary point of contact is Matthew Stanko at fmtewiq@dla.mil.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TRIGGER
Solicitation # SPE7M0-26-T-014P
The contract pertains to the procurement of one SWITCH, TRIGGER with NSN 5930-01-177-5707 under solicitation SPE7M0-26-T-014P, with a required delivery within five days of award. The procurement is governed by DLA packaging requirements and includes the application of Covered Defense Information under RD002, alongside mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 through a self-assessment. All technical and quality requirements referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The government mandates the removal of any government identification from non-accepted supplies. The solicitation was posted on July 21, 2026, with responses due by August 3, 2026, and is classified under NAICS code 335313 for electrical equipment manufacturing. The contracting activity is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with performance required in Lexington, Kentucky, 40516-9723. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, SOLID STATE
Solicitation # SPE7M8-26-T-5694
The contract pertains to the procurement of one solid state switch with NSN 5930-15-013-3178, issued under solicitation SPE7M8-26-T-5694 by the Department of Defense’s Electrical Devices Division. Delivery is required within 20 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The quantity is strictly fixed at one unit with no variance allowed. Packaging must adhere to DLA’s master technical and quality requirements, with hazardous materials complying with TQ requirement IP025 and non-hazardous items packaged per ASTM D3951, though DLA requirements supersede all others. All packaging and labeling must follow MIL-STD-129, and palletization must conform to DLA Packaging Requirements for Procurement. The destination is the USNS MIGUEL KEITH T-ESB #5 in San Diego, CA, with specific transportation protocols outlined in DLAD PROC NOTES C19 and C20. The required delivery date is July 23, 2026, and the point of contact is Dondiego Boler, with additional government tracking codes and identifiers provided for logistics and accountability.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
COVER, ELECTRICAL SW
Solicitation # SPE7M8-26-T-5481
JAL Enterprises, Inc. is contracted to supply one unit of Electrical Switch Cover with NSN 5930-01-653-9597 under solicitation SPE7M8-26-T-5481, with delivery required within 10 days of award to the forwarding unit at 3106 Pierce Parkway, Suite A, Springfield, OR 97477-7909. The item is to be shipped FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E, including PRES MTHD:10 and CLNG/DRY:1 requirements, and marking must follow MIL-STD-129 with no special marking codes. Palletization adheres to DLA packaging requirements, and shipment must use traceable freight methods—parcel post is prohibited. The material has no shelf life and is not classified as hazardous, though it may involve covered defense information. The contract references technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date governing compliance. The required delivery date is July 20, 2026, and the point of contact is Dondiego Boler, with additional government-specific identifiers and logistics codes included for tracking and accountability.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5502
This contract pertains to the procurement of a PUSH SWITCH with NSN 5930-01-715-0401 and part number 95-46-41-H6-56040, under solicitation SPE7M8-26-T-5502, for a quantity of eight units at a unit price of $8.00, totaling $64.00. Delivery is required within 49 days from the contract award, with shipment FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-28786 for preservation and packaging of switches, along with DLA’s packaging requirements, marking standards per MIL-STD-129, and palletization guidelines. No special marking is required. The supply is prohibited from containing Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly permitted by the specification. The item has no shelf life requirement, and covered defense information may apply. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for September 22, 2026, despite the original delivery requirement being July 29, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled based on acquisition type and amendment dates. The unit of issue is each, aligned with DoD standards, and the purchase request number is 7016090372. All performance is bound by the contract terms outlined, including zero variance in quantity and no tolerance for deviations.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7L5-26-T-4545
The contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-480-7049 and part number 9HB630, under solicitation SPE7L5-26-T-4545, requiring exact delivery of 67 units within 168 days from the contract award. All items must be packaged in strict accordance with DLA’s Packaging Requirements for Procurement, prioritizing the DLA Master List of Technical and Quality Requirements over ASTM D3951. If the item is classified as hazardous under Fed-Std-313, packaging must comply with TQ requirement IP025; otherwise, it must be commercially packaged per ASTM D3951, with all packaging and labeling conforming to MIL-STD-129. The Unit of Issue is each (EA), with no tolerance for variance in quantity, and delivery is FOB origin. Inspection and acceptance occur at the destination. The deliverable must be palletized as specified in RP001 and shipped to the designated DLA Distribution facility in New Cumberland, PA. The required ship date is January 19, 2027, with an original delivery deadline of January 21, 2027. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and all documentation must reference the official DLA Unit of Issue standards. The point of contact for this solicitation is Bradley Evans, and responses are due by August 3, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
MOTOR MECHANISM
Solicitation # SPE7M1-26-Q-1317
The contract pertains to the procurement of a MOTOR MECHANISM with NSN/Part Number 5925-01-479-0213, for a quantity of three units, under Purchase Request 7013880785. Delivery is required within 168 days after order, and the solicitation number is SPE7M1-26-Q-1317, with a response deadline of August 18, 2026. The solicitation was posted on August 3, 2026, and is classified under NAICS code 335313, indicating it falls within the Electrical Equipment and Component Manufacturing sector. The purchasing agency is the Department of Defense through the Maritime Supply Chain, with performance to occur at New Cumberland, Pennsylvania, 17070-5002. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions unless amended. The alternate offeror must submit a complete data package including details for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and all submissions must meet the full compliance standards specified. Point of contact for inquiries is Alivia Hatzer, reachable via email and phone.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5693
The contract specifies the procurement of a push switch with part number 47250-6273 and NSN 5930016612935, requiring one unit to be delivered within 20 days to a U.S. military installation in Joint Base McGuire-Dix-Lakehurst, New Jersey, with delivery terms FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application and must comply with stringent technical and quality standards, including compliance with MIL-STD-130 for Item Unique Identification, MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-28786 for preservation and packaging of switches. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 from August 2016, and all packaging and marking must adhere to DLA-specific requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise stated, and attributes are to be verified at predefined quality levels. The switch must also meet FAA airworthiness approval requirements and bare item marking specifications, and shipment must be made via traceable freight methods—parcel post is prohibited. The contract data requirements include compliance with federal acquisition regulations, unit of issue alignment, and adherence to the latest revisions of applicable military standards referenced in the DLA Master List.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-340N
The contract specifies the procurement of 73 units of fuse cartridges identified by NSN 5920-00-121-5497 and part number F09B32V25A, manufactured in strict compliance with MIL-PRF-15160J Rev 1 Supplement and MIL-PRF-15160L, with no commercial substitutes permitted without prior written government approval. The item is listed on a qualified products list and must be sourced exclusively from qualified manufacturers under the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Use of ozone-depleting substances in any phase of production is strictly prohibited unless explicit written authorization from the contracting officer is obtained. Packaging must adhere to DLA requirements including MIL-STD-129 for marking, with hazardous materials following FED-STD-313 and TQ requirement IP025, and non-hazardous items packed per ASTM D3951 only if not overridden by DLA mandates. Unit of issue is 1FV equaling five units, and all packaging and palletization must comply with RP001. Delivery is FOB origin with zero variance allowed, inspection and acceptance occurring at destination after a 168-day delivery window, with a required ship date of January 19, 2027. All shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLAD procedures C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
Electrical Grounding Strip Manufacturing and SupplyThe contract entails the manufacture and delivery of a single electrical grounding strip identified by NSN 5999-01-738-6818, which must adhere strictly to all applicable military standards for packaging, marking, and documentation. Delivery is required within 20 days after contract award, with terms specified as FOB Destination, meaning the supplier assumes responsibility for all costs and risks until the item reaches the designated delivery point. The item is classified under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing, and the solicitation is structured as a subcontract under the Department of Defense, specifically managed by the Active Devices Division. The place of performance is listed as FPO with a ZIP code of 34091, suggesting delivery to a military postal address, likely for overseas or deployed operations. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, leaving a two-week window for offer submission.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the provision of comprehensive regulatory compliance services for hazardous materials, with a primary focus on the preparation, validation, and ongoing maintenance of Safety Data Sheets in strict alignment with OSHA 29 CFR 1910.1200, DFARS 252.223-7001, and MIL-STD-129 standards. This includes ensuring all documentation meets federal requirements for hazard communication, material handling, and labeling, particularly for defense-related operations and supply chains. The work must support accurate, current, and compliant SDS documentation across all phases of product lifecycle management, with an emphasis on regulatory accuracy and audit readiness. The contract is classified as a subcontract under NAICS code 541690, with a response deadline of August 14, 2026, and performance to be conducted at a designated location in Dulles, Virginia, with a zip code of 20166-7629. It is issued by the Active Devices Division under the Department of Defense, indicating a direct connection to defense logistics and procurement activities. The services are critical to ensuring compliance across military and civilian supply chains, and contractors must demonstrate expertise in federal hazardous materials regulations and experience with DoD-specific documentation protocols.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488999
New
DIBBS
International Freight and Delivery Logistics (FOB Origin)The contract entails the coordination and execution of international freight and delivery logistics for shipments destined to Israel, with all responsibilities beginning at the origin point under FOB terms. The contractor is required to manage comprehensive export documentation and strictly adhere to Department of Defense compliance requirements throughout the transportation process. This subcontract is classified under NAICS code 488999, indicating it involves other support activities for air, rail, and water transportation, and is issued by the Active Devices Division of the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the place of performance is tied to the origin point of shipment and final delivery in Israel, with no specific location details provided beyond the destination country. The contract does not specify a set-aside type or point of contact, and all participation must align with DOD regulatory and security protocols.
All Other Support Activities for Transportation

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable DFARS clauses for the identification, classification, and labeling of hazardous components. The work involves ensuring all chemical substances and mixtures used or handled under the subcontract are accurately assessed for health and physical hazards, properly classified according to GHS standards, and labeled with standardized hazard statements, pictograms, and precautionary information. The contractor must maintain documentation that supports the classification process and aligns with federal regulatory requirements for defense-related supply chains. The contract is issued under NAICS code 541690 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Active Devices Division. It is open for response until August 14, 2026, with the solicitation posted on August 3, 2026. Performance location details are unspecified, but the work is expected to support defense material handling and supply chain integrity. All deliverables must meet stringent compliance benchmarks to ensure workplace safety and regulatory alignment across DoD operations.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military Marking and Labeling ServicesThe contract pertains to the application of military-compliant markings and labels in accordance with MIL-STD-129, requiring precise implementation of data matrix barcodes, handling instructions, and hazardous material warnings to ensure proper identification and safety throughout the supply chain. This work is essential for compliance with Department of Defense standards and must be executed with accuracy to support logistics, storage, and transportation of military equipment and supplies. The solicitation is issued as a subcontract under NAICS code 561910, indicating it falls within miscellaneous business support services, and is managed by the Active Devices Division within the Department of Defense. The opportunity was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and performance will occur at an unspecified location governed by defense logistics requirements. Although no specific place of performance or point of contact is provided, the work will be conducted under the auspices of the Defense Logistics Agency and must adhere to all regulatory and technical specifications tied to military labeling protocols. Interested parties are directed to the DIBBS portal for full solicitation details.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires the packaging of delivered connectors in strict compliance with MIL-STD-2073-1E standards for preservation, handling, and transport, ensuring all materials and methods used are officially approved for military applications. This effort is focused on maintaining the integrity and functionality of the connectors throughout storage and transit by adhering to rigorous environmental and procedural controls outlined in the standard. The work must be performed under the specifications mandated by the Department of Defense’s Active Devices Division and is classified as a subcontract under NAICS code 561910, which covers support services for packaging and preservation. Proposals must be submitted by the stated deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. There are no set-aside designations or specified geographic restrictions for performance, and the physical location of performance is not defined in the provided details. The contract is accessible through the DIBBS platform under solicitation number SPE7M526T365U, and while no point of contact is listed, bidders are expected to follow all federal and military packaging protocols without deviation. The success of this contract hinges on flawless execution of preservation techniques and documentation aligned with military-grade logistics requirements.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Manufacturing of Electrical Receptacle ConnectorsThe contract requires the fabrication and assembly of ten units of military-spec electrical receptacle connectors meeting the National Stock Number 5935016645750 and all associated technical and performance standards. These connectors must adhere to stringent defense-grade specifications to ensure reliability, durability, and interoperability in operational environments. The work is structured as a subcontract under the NAICS code 335312, which classifies it within the electrical equipment manufacturing sector, and is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, giving potential bidders a defined window to submit proposals. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS portal for full documentation and submission. There is no set-aside designation or procurement preference indicated, meaning the opportunity is open to all qualified suppliers capable of meeting the technical and production requirements.
Motor and Generator Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to DLAThe contract requires the final shipment and delivery of packaged resistors to the Defense Logistics Agency through established logistics channels, utilizing DLA’s Vendor Shipment Module and AMPS registration to ensure compliance with federal supply protocols. All deliveries must be routed to Hill Air Force Base, specifically to the zip code 84056-5734, and must adhere strictly to DLA’s procedural and documentation standards to facilitate seamless receipt and inventory integration. This subcontract, classified under NAICS code 484220 for truck transportation, is issued by the Active Devices Division within the Department of Defense and carries a response deadline of August 14, 2026, with the solicitation posted on August 3, 2026. Contractors must confirm their AMPS registration status and validate logistics pathways in advance to avoid delivery delays or contract noncompliance.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561990
New
DIBBS
Packaging and Labeling Services for Defense ElectronicsThe contract requires the provision of packaging and labeling services for resistor units in strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring all units meet Department of Defense standards for durability, traceability, and uniformity. Hazard communication labels and Safety Data Sheets must be included wherever applicable, aligning with regulatory requirements for safe handling and transport of defense electronics components. The work is to be performed at Hill Air Force Base with a zip code of 84056-5734, and all deliverables must be ready to support military logistics and inventory systems without deviation. This subcontract is issued under NAICS code 561990 and is managed by the Active Devices Division under the Department of Defense. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 14, 2026. All proposers must demonstrate full capability to meet the technical specifications, including compliance with military standards for both internal packaging integrity and external labeling accuracy. Failure to adhere to any requirement may result in rejection, and successful contractors must be prepared to support ongoing defense supply chain operations with consistent, auditable quality.
All Other Support Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Manufacture and Supply of Fixed Wire ResistorsThe contract calls for the manufacture and delivery of seven fixed wire resistors with the National Stock Number 5905010619055, manufactured to meet the technical, packaging, and marking standards set by the Defense Logistics Agency, including adherence to J-STD-609 and RP001 specifications. All units must be produced and packaged in strict compliance with these military-grade requirements to ensure interoperability and quality assurance for defense applications. The place of performance is designated as Hill Air Force Base with ZIP code 84056-5734, indicating where the finished product must be delivered or where operational integration is expected. The solicitation, issued under the NAICS code 334418 for other electronic component manufacturing, is classified as a subcontract and was posted on August 3, 2026, with responses due by August 14, 2026. The contracting activity is managed by the Active Devices Division within the Department of Defense, and the opportunity is accessible through the DIBBS platform under solicitation reference SPE7M526T365M.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication & SDS Compliance SupportThe contract requires the preparation and submission of Safety Data Sheets and hazard warning labels for electronic components, ensuring full compliance with OSHA 29 CFR 1910.1200, DFARS, and Federal Standard No. 313. This work involves accurately documenting chemical hazards, proper classification, and clear labeling of materials to meet federal regulatory standards for workplace and defense supply chain safety. All deliverables must align with the specific formatting, content, and dissemination requirements mandated by these regulations to support safe handling, storage, and usage across military and contractor environments. This subcontract is issued by the Active Devices Division under the Department of Defense with a place of performance designated as FPO, ZIP 96663. It is classified under NAICS code 541690 for other scientific and technical consulting services, indicating a need for specialized regulatory and technical expertise. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is available through the DIBBS system. While no set-aside type is specified, the contract is intended for qualified subcontractors capable of delivering compliant hazard communication documentation under defense supply chain requirements.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488999
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThis contract requires the provision of military-compliant packaging, preservation, kitting, palletization, and labeling services for electronic components in accordance with DLA RP001, MIL-STD-129, and MIL-STD-2073-1E standards to support military logistics operations. All work must adhere strictly to Department of Defense specifications to ensure compatibility with military supply chain requirements, including proper labeling, unitization, and environmental protection of sensitive electronic parts during transit and storage. The services are intended for shipment via military channels and must meet rigorous durability, traceability, and compliance benchmarks to facilitate seamless handling at military facilities. The contract is classified as a subcontract with a NAICS code of 488999 and is being managed by the Active Devices Division under the Department of Defense. The place of performance is designated as FPO with a ZIP code of 96663, indicating delivery to a military post office location, typically for overseas or expeditionary use. Responses are due by August 14, 2026, with the solicitation posted on August 3, 2026. Interested parties must submit proposals through the DIBBS platform using the provided link to be considered for award, and compliance with all military packaging and labeling regulations is non-negotiable for contract fulfillment.
All Other Support Activities for Transportation

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details