Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CIRCUIT CARD ASSEMB

Active
SPE7M1-26-T-246DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four circuit card assemblies identified by NSN 5998-01-707-9985, with a delivery requirement of 20 days after award. The solicitation number is SPE7M1-26-T-246D, issued on August 2, 2026, with responses due by August 13, 2026, and falls under NAICS code 334412, indicating classification within electronics manufacturing. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed per specified directives. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applying equally to foreign national employees and foreign subsidiaries of U.S. companies. DFARS 252.225-7048 governs this data, and only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on export-controlled technical data and been formally approved by DLA, may access it. Performance is to be conducted at Fort Bragg, North Carolina, with Ryan Snyder of the Department of Defense's Maritime Supply Chain as the primary point of contact. The contract type is a solicitation with no set-aside designation, and all compliance obligations are tied to DLA’s regulatory and security protocols.

General Info

Procure four circuit card assemblies by August 20, 2026, under export-controlled DLA protocols at Fort Bragg.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

BLDG A 3434 KEERANS STREET, FORT BRAGG, NC, 28310-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-246D for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Ryan Snyder
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5998-01-707-9985 Quantity: 4 EA Purchase Request: 7017688298QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
AC V MEASMT MODULE
Solicitation # SPE7M0-26-T-025L
The contract pertains to the procurement of an AC V MEASMT MODULE with NSN 5998015179282 and part number P/N 9011A0512-101 from L-3 Communications Westwood, with an alternate part number P/N PL708701 ITEM 288. The requirement is for one unit to be delivered within five days FOB destination, with no tolerance for quantity variance. The item is subject to Item Unique Identification (IUID) compliance per MIL-STD-130 and DFARS 252.211-7003. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliant to MIL-STD-129 and special ESD-sensitive labeling code 39. The unit must be palletized according to DLA standards and shipped to USS SAN ANTONIO LPD 17 at FPO AE 09587. Transportation logistics follow DLAD procedure notes C19 and C20, with the shipment flagged as a vessel or RDD 999/NMCS delivery. The contract is issued under solicitation SPE7M0-26-T-25L, with a required delivery date of July 30, 2026, and technical and quality requirements referenced from the DLA Master List. The purchase request number is 7017688258, and the point of contact is Audrey Acuna of the Department of Defense Maritime Supply Chain ESOc Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
CONTROL, ELECTRIC LI
Solicitation # SPE4A6-26-T-11CN
This contract specifies the procurement of a circuit card assembly identified by NSN 6220-01-710-4814 and part number 15-9-15-110-0FL, with a quantity of 11 units to be delivered FOB origin within 136 days of contract award. The unit price is $11.00 per unit, resulting in a total contract value of $121.00. All items must comply with DLA packaging requirements as outlined in RP001 and be packed in accordance with MIL-STD-2073-1E, using packaging method 10, with no cleaning or drying required. Marking must adhere to MIL-STD-129, including the special fragile marking code 01. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. No quantity variance is permitted. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The item is subject to demilitarization guidelines for Category I munitions. Transportation details reference DLAD Proc Notes C19 and C20, and the contract requires compliance with all specified packaging, marking, and handling standards without exception. The solicitation number is SPE4A6-26-T-11CN, issued on August 2, 2026, with responses due by August 10, 2026, under a NASIC code of 334412, managed by the Department of Defense's ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M0-26-T-025B
The contract specifies the procurement of a single circuit card assembly with part number 14024-0021-01 and NSN 5998016815590 under solicitation SPE7M0-26-T-025B, requiring delivery within five days FOB origin with no variance allowed in quantity. The item must be packaged in compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, using packaging code U and E5 unit containers, with all palletization following DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Documentation for source approval is required under RC001, and special marking code ZZ indicates unique contractual requirements. Market research is mandated due to the absence of available technical data; the supplier must provide sufficient information to verify ESD/EMI sensitivity so appropriate packaging protocols can be confirmed. The delivery point is in Pascagoula, Mississippi, with inspection and acceptance occurring at destination, and the point of contact is Audrey Acuna of the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMBLY
Solicitation # SPRDL1-26-R-0100
DLA Land Warren

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
DIBBS
ELECTRICAL STANDARD
Solicitation # SPE7M1-26-T-219R
The contract pertains to the procurement of a single unit of an electrical standard item, identified by NSN 6625013663837 and part number 85056A from Hewlett-Packard Company DBA HP 28480, under solicitation SPE7M1-26-T-219R. Delivery is required within 20 days after award, with FOB Origin terms applying, and the designated delivery location is the Distribution Management Office at Twentynine Palms, California. The item must be packaged in strict compliance with DLA standards, where non-hazardous materials follow ASTM D3951 and hazardous materials adhere to TQ Requirement IP025 and FED-STD-313, with the DLA Master List of Technical and Quality Requirements taking precedence over all other standards. Packaging and labeling must conform to MIL-STD-129, including proper Unit of Issue and Quantity per Unit Pack, and palletization must follow RP001. All hazardous materials must be accompanied by a fully completed Safety Data Sheet compliant with FED-STD-313 and an OSHA 29 CFR 1910.1200-compliant hazard communication label, and the offeror must determine and disclose any hazardous content per FAR 52.223-3 and DFARS 252.223-7001. The contract mandates electronic submission of all documentation through DIBBS and requires all invoicing and receiving reports to be submitted via WAWF. Delivery must be made by traceable freight, excluding parcel post. The contract incorporates multiple FAR and DFARS clauses, including those addressing trafficking in persons, employment eligibility, sustainable products, hazardous material identification, data rights, and NIST SP 800-171 cybersecurity requirements, with several deviations authorized. The offeror must provide a Unique Entity ID and CAGE code, along with representations regarding small business status and socioeconomic categories, and must notify the contracting officer in advance of any delivery containing radioactive materials above specified thresholds. Despite the structural presence of pricing lines, no unit or total contract value is specified, suggesting this is a simplified acquisition with pricing determined post-award or based on pre-established pricing mechanisms. The evaluation criteria, source selection methodology, and specific award basis are not delineated in the available documentation.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334412
New
Federal
CARD CAGE ASSY
Solicitation # N0010426QTB86
The solicitation seeks repair services for the CARD CAGE ASSY under a firm-fixed-price contract with a required Repair Turnaround Time of 229 days, though accelerated delivery is encouraged. The Government requires full compliance with MIL-STD-129 for marking and MIL-STD-2073 for packaging, and mandates strict adherence to approved technical procedures, drawings, and manufacturer directives. All repair work must meet operational and functional specifications tied to the CAGE code 04804 and reference number 6D29167G01. Any design, material, or part number changes require written approval and classification under specific Code designations, with Code 1 exceptions permitted for identical part substitutions. Mercury contamination is strictly prohibited; the contractor must ensure no metallic mercury or mercury compounds are used in manufacturing or testing, and any intentional use requires prior written approval, detailed justification, and inclusion of a warning plate. The contractor is responsible for all inspection and testing in accordance with original manufacturer specifications and must maintain complete records for 365 days after final delivery. Government Source Inspection is mandatory, and all freight is FOB Origin, with the Navy handling logistics. The contract includes a mandatory option to increase quantities at the original unit price, exercisable by the Contracting Officer within FAR-specified timeframes. Compliance with Buy American, small business subcontracting, cybersecurity maturity certification, and the mandatory use of Workflow Pro (WFP) Mod Assist Module are required. The contractor must submit a quote detailing unit and total price, RTAT, and comparison to new unit price and lead time. Non-compliance with the required RTAT must be explicitly explained. The awardee must provide CAGE codes for the facility performing the repair and for inspection, with the Government retaining rights to audit quality records and inspect work. The contractor must also ensure subcontractors adhere to all terms, including mercury safety and inspection obligations. All documentation and compliance must be submitted via the designated Navy point of contact, Rebecca A. Rainey, and the contract is governed by a range of applicable Department of Defense directives, deviation notices, and procedural standards issued through 2026.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAE5
This contract pertains to the manufacture and delivery of a CIRCUIT CARD ASSEMBLY under emergency acquisition flexibilities, with immediate bilateral execution upon contractor acceptance. The item must conform to stringent military standards including MIL-STD-973 for configuration control, MIL-STD-130 for item marking, and ANSI/ESD S20.20 for electrostatic discharge protection. All components must be mercury-free and free from contamination, with explicit prohibitions on mercury use unless prior written approval is obtained through detailed documentation. The contractor is responsible for ensuring quality through an inspection system compliant with MIL-I-45208 and must maintain complete inspection records for four years after final delivery. Configuration changes require explicit Government approval, and only approved drawing revisions may be used, with notification required for any prior authorizations carried over from previous contracts. The item must be produced under a DPAS-rated order and delivered with proper packaging per MIL-STD-2073. The contractor must be the Original Equipment Manufacturer or provide a signed letter of authorization from the OEM if acting as a distributor. All materials must be labeled with the specified CAGE code 96169 and reference number 263501706-001CE. Shipping and receiving must follow Wide Area Workflow payment instructions and require a standalone receiving report. Warranty is one year from delivery date. Compliance with security prohibitions, annual certifications, and mandatory use of Workflow Pro’s Assist Module is required. The contract is administered by NAVICP-MECH in Mechanicsburg, PA, with sole point of contact at the provided Navy email address. Solicitation responses are due by September 9, 2026, under NAICS code 334412, and all contractual documents are deemed issued upon electronic transmission.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QDB40
This contract pertains to the repair and modification of circuit card assemblies under solicitation N0010426QDB40, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement mandates a strict Repair Turnaround Time (RTAT) of 227 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system, to final government acceptance. All pricing is firm-fixed-price with no allowances for cost escalation, and contractors must account for all costs associated with repairing items in unwhole, damaged, or incomplete condition, including missing parts and wear. Government Source Inspection is required, and freight is handled by the Navy under CAV protocols with FOB Origin terms. The contract enforces compliance with MIL-STD-130 for marking and mandates adherence to manufacturer specifications and approved repair procedures under the contractor’s quality system, with all inspection records retained for 365 days post-delivery. The solicitation requires proof of authorized distributor status for the original manufacturer’s items, and any substitutions or design changes must be approved in writing by the contracting officer, classified under specific code designations ranging from part number-only changes to non-interchangeable redesigns. Contractual obligations include compliance with the Buy American Act, the Small Business Subcontracting Plan, cybersecurity maturity model certification requirements, and mandatory use of Workflow Pro for payment and receiving. Additionally, the contract incorporates clauses on security prohibitions, annual representations and certifications, and priority ratings for national defense. All repair awards are pre-populated with RTAT, throughput constraints, and induction expiration dates limited to 365 days. Contractors must submit a detailed quote including unit price, total price, RTAT, and, if unable to meet the required timeframe, documentation of capacity limitations. Tear-down and evaluation fees are capped at a negotiated not-to-exceed amount if the item is deemed beyond repair, and all submissions must align with the specified NAICS code 334412 and respond to the deadline of August 17, 2026.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # SPRMM126QHE37
The contract pertains to the manufacture and delivery of a CIRCUIT CARD ASSEMB, governed by strict quality, inspection, and packaging standards including MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging, with all inspections to be performed by the contractor unless otherwise directed by the government. The item must conform to the specified CAGE code 53711 and reference number 5788042-0005, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with substitution codes clearly indicated. The contract mandates strict adherence to federal acquisition regulations under Emergency Acquisition Flexibilities, evaluated under the Lowest Price Technically Acceptable (LPTA) method, and requires electronic submission of invoices and receiving reports through PIEE-WAWF. Contractors must register for EDA on PIEE to access order information and comply with mandatory use of WFP Mod Assist, with all communications routed through designated government points of contact. All offers must include evidence that the vendor is an authorized distributor of the original equipment manufacturer, with full identification of the OEM including CAGE code and part number if not the manufacturer. Inspection and acceptance occur at source at the designated CAGE address, and the contractor retains responsibility for maintaining inspection records for 365 days post-delivery. Delivery and offer validity periods are unspecified, but electronic submissions via EDI require explicit notification of any deviations; otherwise, awards will be based strictly on solicitation terms. The government reserves the right to deny facility changes even if prerequisites are met, and unauthorized changes incur cost deductions. Compliance with distribution statements and access controls for technical data is mandatory, particularly for documents marked NOFORN or restricted to U.S. government use. Contractors are encouraged to register with NAVSUP Weapon System Support to receive automated notifications regarding contract awards and modifications through NECO and PIEE, and all documentation must align with the specified government procurement notes and federal acquisition policies.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
CNTRL CARD,MTX-MR
Solicitation # N0010426QND98
This contract pertains to the manufacture and delivery of the CNTRL CARD, MTX-MR under solicitation N0010426QND98, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement is governed by emergency procurement flexibilities and will be awarded bilaterally upon contractor acceptance. Key technical specifications mandate compliance with MIL-STD-130 for marking, MIL-STD-461 for electromagnetic interference, and ANSI/ESD S20.20 for electrostatic discharge control. The item must be mercury-free and free from contamination, with any intentional use of mercury requiring prior written approval and the inclusion of a warning plate. Quality assurance must adhere to MIL-I-45208 or ISO 9001, with all inspection responsibilities resting with the contractor unless otherwise directed by the government. The contractor must maintain inspection records for four years after final delivery. All contractual obligations are subject to federal acquisition regulations and specific defense directives, including the Buy American Act, Small Business Subcontracting Plan, and Security Prohibitions. The contractor must certify compliance with veteran and disability workplace equity requirements and submit a Small Business Program Representation. Packaging must follow MIL-STD-2073, and the item is subject to Defense Priorities and Allocations System certification. The contractor must notify the contracting officer of any design, material, or part number changes and provide documentation for approval. Subcontractors are bound by the same mercury, quality, and inspection requirements. The requirement is supported by emergency procurement authority, with all documents deemed officially issued upon electronic transmission. The offeror must be the original manufacturer or provide authorized distributor documentation, and if final packaging occurs elsewhere, the facility details must be disclosed. The contract is tied to national defense systems aboard submarines and surface ships, making compliance with contamination controls and material integrity critical.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
Circuit Card Assembly ManufacturingThe contract requires the manufacture and delivery of a single circuit card assembly with part number HMUM-DSDC-7003 and NSN 5998-01-498-0335, ensuring full compliance with all technical, quality, packaging, and shipping standards set by the Defense Logistics Agency. This subcontract is part of a broader Department of Defense procurement effort under the Maritime Supply Chain, with performance obligated at Tracy, California, specifically at the zip code 95304-5000. All work must meet stringent DLA specifications to ensure operational readiness and compatibility within military systems. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the NAICS code 334412 indicating classification within electronic component manufacturing. The contract is issued under a DLA RFQ system and requires precise execution to meet defense supply chain requirements.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
Electronic Component Manufacturing and AssemblySeven defense-grade electronic components, identified by NSN 5998016088630, must be manufactured, configured, and assembled in full compliance with military and source-controlled drawings, with rigorous configuration control maintained throughout the production process. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the contract is classified as a subcontract under NAICS code 334412. This procurement falls under the purview of the Department of Defense through the Maritime Supply Chain organization, and all deliverables must meet exacting defense standards with no deviations permitted without formal authorization.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M1-26-T-245Y
The contract specifies the procurement of a solenoid, electrical component identified by NSN 5945-01-293-2059 and part numbers 654VE7513-1 from Lockheed Martin and H-3289-030 from SAIA-BURGESS INC. A total of fifteen units are required at a unit price of $15.00, with delivery due within 53 days FOB origin. The item is classified as a critical application item, and all supplies must comply with DLA packaging requirements under MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 and IPC/JEDEC J-STD-609, requiring Pb and Pb-free attribute labels on each individual unit package per defined placement guidelines. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, assigning verification levels or AQLs based on attribute criticality, with zero non-conformances required unless otherwise stated. Inspection and acceptance occur at the destination, requiring strict adherence to zero variance in quantity. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of May 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with compliance controlled by the revision in effect at the solicitation or award date. All documentation and procedures must align with DLA’s authorized units of issue and transportation directives.
Relay and Industrial Control Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-244M
The contract pertains to the procurement of three alternating current motors identified by NSN 6105-01-508-7921 under solicitation SPE7M1-26-T-244M, with a required delivery within 144 days of award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware unless specifically exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The alternate offeror is required to submit a complete data package detailing both the primary and alternate parts, as no data is currently available. The contract is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with solicitation issued on August 2, 2026, and responses due by August 13, 2026. Performance is to occur in San Diego, California, and inquiries may be directed to Michael Reese at the provided contact information.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, WAVEGUIDE
Solicitation # SPE7M1-26-T-243Y
The contract pertains to the procurement of two waveguide adapters, identified by NSN 5985-00-752-5826 and part numbers HX-170A and HX292B, under solicitation SPE7M1-26-T-243Y. Delivery is required within five days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. The items are subject to stringent cybersecurity requirements under CMMC Level 2 self-assessment and the handling of covered defense information. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The contract mandates adherence to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. Shipment is directed to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, via freight forwarder A.J. Worldwide Services Inc., with the original delivery date set for December 2, 2025. The item falls under NAICS code 334220 and is managed by the Department of Defense’s Maritime Supply Chain.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-246G
The contract specifies the procurement of 3,500 feet of electrical wire under NSN 6145-00-578-6594, with delivery required within 158 days from the contract date, FOB origin, and a permissible quantity variance of plus or minus 5 percent. The wire must comply with technical standards SAE AS50861/2A and SAE AS50861 Revision B, and all components must originate from sources listed on the Qualified Products List or Qualified Manufacturers List, as this NSN is designated as a primary QPL/QML item. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-12000, with marking conforming to MIL-STD-129 and palletization following DLA packaging requirements. The wire must be furnished in continuous length if the advice code is 2N, 28, or 34; if the code is 2P or 39, multiple unit packs are acceptable, with the advice code taking precedence over any conflicting schedule information. Mercury and mercury-containing compounds are strictly prohibited unless expressly exempted for approved applications such as batteries, fluorescent lights, instrument sensors, weapon systems, or specified chemical reagents, and any portable devices containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The solicitation number is SPE7M1-26-T-246G, with a response deadline of August 13, 2026, and the contracting office is part of the Department of Defense’s Maritime Supply Chain under full and open competition with no set-aside.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
ACTUATOR, DIAPHRAGM
Solicitation # SPE7M1-26-T-245F
The contract is for the procurement of three diaphragm actuators with part number 4310-01-289-1658 under solicitation SPE7M1-26-T-245F, issued as a total small business set-aside with NAICS code 333912. Delivery is required within 158 days of award, with a firm delivery deadline of January 19, 2027, and the items must be shipped FOB origin. The product is classified as a critical application item manufactured by Curtiss-Wright Electro-Mechanical Corp. Compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-C-3600, is mandatory, with preservation method ZZ requiring Level A preservation. Packaging and marking must adhere strictly to MIL-STD-129 and RP001 requirements, with no special marking codes applied. The contract prohibits the use of Class I ozone-depleting chemicals in any component and bans the intentional addition of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, sensors, and authorized instruments under NAVSEA 5100-003D, which must include a second boundary of containment. All deliveries must be inspected and accepted at the destination, with zero variance allowed in quantity. The designated delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLAD procedural notes C19 and C20. The solicitation was issued on August 2, 2026, with a response deadline of August 13, 2026, and the point of contact is Michael Reese of the Department of Defense Maritime Supply Chain.
Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7M1-26-T-244V
The contract pertains to the procurement of COVER, ACCESS under solicitation SPE7M1-26-T-244V, with a requirement for two units to be delivered within 77 days of award to Tracy, California, 95304-5000. The item is identified by NSN 5340-01-516-4047 and is part of purchase request 7012381335. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment later updates it. Strict prohibitions against intentional addition of mercury or mercury-containing compounds apply to all supplied hardware or materials, except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable items containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Identification marking must comply with MIL-STD-130N dated November 16, 2012. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Haley Clark as the primary point of contact, and responses are due by August 13, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M1-26-T-245K
The contract specifies the procurement of 3,000 feet of special purpose electrical cable, designated by NSN 6145-01-224-2081, to be delivered in continuous length with a 5% variance allowed in quantity. Delivery is required within 158 days from the award date, with shipment to be made FOB origin and inspected and accepted at the destination. The cable must comply with MIL-STD-2073-1E for packaging and MIL-DTL-12000 for preservation, with markings conforming to MIL-STD-129. The product must not contain intentionally added mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or specified chemical reagents; portable devices containing mercury must have shock-proof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. Packaging must adhere to DLA’s requirements and be palletized per RP001. Only specific approved suppliers are listed, including Aerospace Wire & Cable, Belden, Eaton Aeroquip, and others, each with their respective part numbers. The advice code determines packaging form—continuous length is mandatory for codes 2N, 28, or 34, while 2P or 39 allow multiple unit packs, with the advice code overriding any conflicting schedule data. The delivery destination is Tinker AFB, Oklahoma, and the contract is issued under solicitation SPE7M1-26-T-245K, with technical and quality requirements referenced from the DLA Master List. The required delivery date was originally October 7, 2026, with a need ship date of January 19, 2027.
Other Communication and Energy Wire Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-244D
The contract pertains to the procurement of four safety relief valves identified by NSN 4820-99-373-6251 and part numbers G406/8058 and G406/8058/1611, supplied by KNDS Defence UK Limited and BOSCH REXROTH LTD. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must comply strictly with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 requirements. Shipping must be via the fastest traceable means, excluding parcel post, to the designated DLA depot in Texarkana, Texas. The contract is issued under solicitation SPE7M1-26-T-244D with an original required delivery date of June 29, 2026, and the unit of issue is each, priced at $4.00 per unit. The item is designated as critical for application, and all markings and documentation must include the government-controlled identifiers and codes provided in the contract.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-244E
This contract specifies the procurement of four safety relief valves with NSN 4820-99-225-8756 under solicitation SPE7M1-26-T-244E, with a required delivery within five days of award. The valves are classified as critical application items and must be supplied by approved vendors, including BOSCH REXROTH LTD and KNDS DEFENCE UK LIMITED with designated part numbers. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements, and mandates that any substitute chemicals be pre-approved unless explicitly authorized. All packaging, marking, and labeling must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements and the DLA Master List of Technical and Quality Requirements taking absolute precedence. The item must be shipped FOB origin using the fastest traceable means, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 in Texarkana, Texas. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination. The contract reference includes a purchase request number, unit price of $4.00 per unit, and total price of $16.00, with a required delivery date of June 29, 2026. All documentation must include the prescribed government markings, shipping identifiers, and project codes, and the point of contact for inquiries is Misty Eckard with the Department of Defense’s Maritime Supply Chain.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
RESERVOIR, HYDRAULIC
Solicitation # SPE7M1-26-T-245U
This contract is for the procurement of a hydraulic reservoir identified by NSN 4320014860184 and part number 100894, with a quantity of four units to be delivered under solicitation SPE7M1-26-T-245U. The item is subject to strict packaging and marking requirements aligned with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment codes, and the prohibition of mercury or mercury-containing compounds unless explicitly exempted for functional components like batteries, fluorescent lamps, or weapon systems, which must still meet additional safety standards. Delivery is FOB origin with no variance allowed in quantity, and the item must arrive at the designated receipt warehouse in Tracy, California, within 158 days of the contract award, with an original required delivery date of January 31, 2027. Transportation and shipping instructions adhere to DLA procedural notes C19 and C20, and the unit of issue is AY as defined by DLA standards. The contract is issued under a total small business set-aside classification, with the NAICS code 333996, and is managed by the Department of Defense’s Maritime Supply Chain office. All technical and quality specifications referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition size and solicitation timeline. The supplier must comply with all DLA packaging and labeling directives, including the use of approved containment materials and palletization standards. The point of contact for inquiries is Michael Reese, and all documentation, including unit of issue conversions, must be referenced through official DLA portals. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and a ship date of January 19, 2027, for fulfillment planning.
Fluid Power Pump and Motor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
HOUSING, FILTER
Solicitation # SPE7M1-26-T-245L
Offerors responding to solicitation SPE7M1-26-T-245L for 39 filter housings must adhere to strict compliance requirements covering domestic sourcing, telecommunications restrictions, and procurement protocols. The Berry Amendment and Buy American Act apply with a reduced threshold of $150,000, requiring full disclosure of any non-domestic materials used in the product, and failure to comply may disqualify the quotation. Offerors are prohibited from supplying covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016, and must affirmatively represent they will not provide such items in performance of any award. Additive manufacturing is not permitted unless explicitly approved by the contracting officer, and any offer including AM-produced items will be deemed non-responsive. Due to fluctuating demand, offerors are strongly encouraged to submit price quotations as ranges rather than fixed quantities to facilitate award flexibility without administrative delays. Small business joint ventures must submit required certifications under FAR provisions 52.212-3 and 52.219-1 for applicable set-aside categories. All vendors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to gain access to the Vendor Shipment Module, with critical schema updates required for WebServices users to maintain shipping functionality. Failure to register or update schemas will result in loss of shipping privileges. Vendors unable to quote by the closing date must still submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid unnecessary requirement cancellations. Fast Pay is not applicable, and all submissions must be made through DIBBS with precise compliance to the listed NSN, delivery timeline of 99 days ADO, and point of contact at Michael Reese, DLA Maritime Supply Chain.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
FILTER ASSEMBLY, FLU
Solicitation # SPE7M1-26-T-243W
The contract pertains to the procurement of one FILTER ASSEMBLY, FLU with NSN 4310-01-711-7657 and part number A77-19021, supplied by RIX INDUSTRIES, under solicitation SPE7M1-26-T-243W. Delivery is required within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. The item must be delivered to the specified destination, where inspection and acceptance occur, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. Ozone-depleting chemicals are strictly prohibited in manufacturing or incorporation, necessitating approved substitutes whenever specifications permit. The unit of issue is each, and shipment must be sent via the fastest traceable means, excluding parcel post, with delivery directed to the submarine base in Groton, CT, and final destination at FPO AE 09592-1200. The required delivery date is July 29, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List, with revisions controlled by the solicitation issue date. Government-use identifiers are restricted to authorized documentation only.
Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details