Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

CIRCUIT CARD ASSEMB

Awarded

SPRMMI26QMH80Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, solicitation number SPRMMI26Q0MH80, is a justification for other than full and open competition for the procurement of 39 Circuit Card Assembly units, identified by NSN 5998 016098683 and Part Number 300983-2-2. The acquisition is being managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg office, with the place of performance located in Morristown, New Jersey. The procurement falls under NAICS code 334412. Under the authority of 10 USC 3204(A)(1), Tri-Tec Manufacturing, CAGE code 98032, has been identified as the sole source for this requirement due to proprietary data rights. This determination follows market research and a sources sought notice, which confirmed that no other viable sources are available to provide the necessary components.

General Info

DoD sole source contract with Tri-Tec Manufacturing for 39 Circuit Card Assembly units.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

Morristown, NJ, 07960, USA

Set-Aside

NONE

Documents

1

J&A for CIRCOUT CARD ASSEMBLY - DLA Maritime

justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 22

Justification (J&A)

AwardedOct 28

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Contacts1 person available

OfficeMECHANICSBURG, PA, 17055-0788, USA

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressMECHANICSBURG, PA, 17055-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

NSN: 5998 016098683, Part # 300983-2-2

Similar Contracts

Same NAICS industry code

PRINTED CIRCUIT BOA

Solicitation # SPE7M5-27-T-1591

Solicitation SPE7M5-27-T-1591 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of five printed circuit boards, identified by NSN 5998016434816. The required delivery date is March 2, 2027, with a delivery window of 112 days after the award. Shipping is FOB Origin, and the destination for both inspection and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including CMMC Level 2 Self-Assessment and the prohibition of intentionally added mercury. Packaging is a critical requirement, necessitating DOD qualified Electrostatic Discharge and Electromagnetic Interference protective materials per MIL-PRF-81705 and MIL-STD-2073-1E to prevent damage to leads and terminals. Marking must comply with MIL-STD-129, specifically using special marking code 39 for ESD sensitive electronic devices. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0840

Solicitation SPE7M1-27-T-0840 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of eight GE FANUC Embedded Systems Inc. circuit card assemblies, part number PMC942RC, under NSN 5998-01-628-2855. The requirement falls under NAICS code 334412. The need ship date is June 12, 2027, with an original required delivery date of June 6, 2027. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements listed in the DLA Master List, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special safety and security provisions apply, including a prohibition on intentionally added mercury per NAVSEA 5100-003D, a requirement for CMMC Level 2 Self-Assessment, and compliance with Covered Defense Information standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. All quotations must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M5-27-T-1585

Solicitation SPE7M5-27-T-1585 is a federal procurement issued by the DLA Weapons Support Active Devices Division for the acquisition of five circuit card assemblies. The required items are identified by NSN 5998016919292 and part number 9800-96605-0002 from DRS Network and Imaging Systems LLC. These components are designated as critical application items. The contract specifies a delivery timeline of 56 days after receipt of order, with a need ship date of January 5, 2027, and an original required delivery date of May 29, 2027. Shipping is established as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The procurement is governed by several technical and quality standards, including RA001 for general requirements, RQ002 for configuration change management, and RQ011 for the removal of government identification from non-accepted supplies. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, specifically those regarding cybersecurity safeguarding, the Buy American Act, and prohibitions on the acquisition of certain telecommunications equipment.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-1665

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies to support DLA supply contracts for the Department of Defense, specifically through the Pa DLA Aviation At Philadelphia. The scope of work includes fabricating printed circuit boards, sourcing and populating components using SMT or through-hole assembly, and performing functional verification with testing equipment. The primary deliverable consists of three units of NSN 5998-01-462-4333. The contractor must ensure strict compliance with the Buy American Act regarding domestic origin requirements. Additionally, the provider is responsible for reporting end items via IUID through the IUID Registry or WAWF. This opportunity falls under NAICS code 334412, with a response deadline set for November 6, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAJB

Solicitation N0010426QYAJB is a fixed-price request for quotations issued by the Navsup Weapon Systems Support Mech for the teardown, evaluation, repair, and modification of a circuit card assembly, NSN 5998-01-577-3864. The contractor is required to perform all work in accordance with original manufacturer specifications and drawings, adhering to strict quality standards including ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent contamination on submarines and surface ships. Delivery is required within 111 days on a FOB Destination basis, with all items physically identified and packaged according to MIL-STD-129, MIL-STD-130, and MIL-STD-2073. Due to the nature of the equipment, the contractor must possess a government security clearance and authorized access to Secret level classified documents as detailed in DD Form 254. Award evaluations will be based on Supplier Performance Risk System assessments regarding item, price, and supplier risk. The contractor must maintain inspection records for 365 days following final delivery and utilize the Wide Area Workflow system for electronic invoicing. Additional compliance is required for cybersecurity maturity model certification and the detection and avoidance of counterfeit electronic parts.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF8

Solicitation N0010426QYAF8, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a request for quotations for the manufacture and delivery of a Circuit Card Assembly (NSN 5998-01-616-3772). The procurement requires strict adherence to Technical Data Package version 002 and mandates that the supplier maintain a quality system compliant with ISO 9001 or MIL-I-45208. Key technical requirements include compliance with ANSI/ESD S20.20 for electrostatic discharge control and a strict mercury-free mandate for use on submarines and surface ships. The contract includes an option for additional quantities up to 100 percent for 365 days after receipt of the order. The government will evaluate offers based on the Supplier Performance Risk System, focusing on item, price, and supplier risk, while prioritizing U.S.-made or qualifying country end products. Award consideration is limited to original equipment manufacturers or authorized distributors who can provide a signed letter of authorization. Deliverables must be marked per MIL-STD-129 and packaged according to MIL-STD-2073-1, with specific packing levels based on the destination. Inspection and acceptance will occur at the origin, and all payment requests must be processed electronically through the Wide Area Workflow system. Following two amendments, the final response deadline for offers is October 28, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAES

Solicitation NO0104-26-Q-YAES is a small business set-aside request for quotations issued by the Department of the Navy, NAVSUP Weapon Systems Support Mech, for the manufacture and delivery of circuit card assemblies (NSN 5998-01-577-3862). The required items must conform to the design represented by Cage Code 03538 and reference number 77C733426G1, utilizing TDP Version 002. Key technical requirements include strict adherence to ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent corrosion and toxicity on submarines and surface ships. The contract specifies a delivery timeline of 180 days with FOB Destination terms and requires a one-year warranty from the date of delivery. The procurement process includes several critical compliance and quality standards. Items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073, with specific labeling requirements for Depot Level Repairable items. Inspection and acceptance will occur at the origin, with the contractor holding primary responsibility for quality assurance. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on OEM letterhead. Evaluation of quotes will be based on Supplier Performance Risk System assessments, focusing on item, price, and supplier risk. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF9

Solicitation N00104-26-Q-YAF9, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks quotations for the manufacture and delivery of a circuit card assembly, identified by NSN 5998-01-680-8202 and Cage Code 03538. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense. The government maintains an option to order an additional quantity of up to 100 percent of the original order at the same price for 365 days after receipt of order. The closing date for the receipt of offers has been extended to November 05, 2026. The contractor must adhere to strict quality and technical standards, including ISO 9001 quality system requirements and ANSI/ESD S20.20 for electrostatic discharge control. Supplies must be mercury-free and packaged according to MIL-STD-2073-1 and marked per MIL-STD-129. Delivery is required within 180 days, FOB Destination, with inspection and acceptance occurring at the origin. A one-year warranty from the date of delivery is required for these noncomplex supplies. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization on the OEM's letterhead to be considered for award. Invoicing and payment will be processed electronically via Wide Area Workflow.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRPA127QZA36

Solicitation SPRPA127QZA36, issued by DLA Aviation at Philadelphia, is a request for quotations for five newly manufactured Circuit Card Assemblies (NSN 5998-01-728-8235). This procurement is designated for Critical Safety Items (CSI) and Critical Application Items (CAI), requiring strict adherence to quality management standards such as AS/EN/JISQ 9100 or an equivalent system. The government will make a single award based on the most advantageous offer, with past performance weighted as more important than price. Proposals are due by November 6, 2026, and must be submitted to the primary point of contact, Naseem Aoun. The contract mandates that all supplies be newly manufactured; refurbished or repaired materials are ineligible for award. Offerors must be government-approved sources of supply, and authorized distributors must provide a formal authorization letter on the source's letterhead at the time of proposal. Technical requirements include strict packaging and marking standards per MIL-STD-2073 and MIL-STD-129, with specific electrostatic discharge protection required for sensitive items. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and receiving reports, with delivery terms set as FOB Destination.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAEQ

This solicitation, issued by NAVSUP Weapon Systems Support, is for the manufacture and procurement of a circuit card assembly under NAICS code 334412. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The government maintains an option to order an additional quantity of up to 100 percent for 365 days after receipt of the order at the same price. The resultant award will be issued bilaterally, requiring written acceptance from the contractor. Key technical requirements include strict adherence to electrostatic discharge control standards and a total prohibition of metallic mercury contamination, as the items are intended for use on submarines and surface ships. Quality assurance must comply with MIL-I-45208 or ISO 9001 standards, and the contractor is responsible for all inspection requirements. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization from the OEM to be considered. The solicitation closing date was extended via Amendment 0001 to September 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QLA02

Solicitation NO00104-27-Q-LA02 is a Request for Quotations issued by the NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of a Computer CCA (NSN 5998-01-600-9910). The contractor is required to ensure the repaired item meets all operational and functional requirements using approved repair standards and manuals. Key performance metrics include a required Repair Turnaround Time (RTAT) of 170 days, measured from the physical receipt of the asset to final government acceptance. The contract mandates Government Source Inspection (GSI) and requires the contractor to maintain inspection records for 365 days following final delivery. Compliance requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-129 and MIL-STD-2073-1 for packaging and marking. All shipments are FOB Origin, and electronic invoicing must be processed through the Wide Area Workflow system. Award consideration is limited to authorized distributors of the original manufacturer, with evaluations based on price and past performance as tracked via the DoD Supplier Performance Risk System. Additionally, offerors must provide CMMC unique identifiers and comply with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

MIL-SPEC Packaging and Preservation for Mechanical AssembliesThis subcontract involves providing specialized preservation, packaging, and marking services for mechanical conduit assemblies supporting prime contractors on DLA Mechanicsburg supply contracts. The scope of work requires the use of industrial marking and labeling equipment to ensure all items are processed and delivered ready for FOB Destination shipment. Compliance is mandatory with specific military standards, including MIL-STD-2073 for packing and preservation, as well as MIL-STD-129 and SPI 03950-10184 for package marking. This Department of Defense requirement falls under NAICS code 488410 and is managed by the SPRMM1 DLA Mechanicsburg agency.

Motor Vehicle Towing

POSTED

DEADLINE

Manufacture of Mechanical Conduit AssembliesThis subcontract involves the manufacture of custom mechanical conduit assemblies for prime contractors supporting DLA Mechanicsburg. The scope of work requires the fabrication of three specific assemblies identified by NIINs 017027712, 017027714, and 017027719. All production must strictly adhere to TDP Version 002 and specified CAGE codes, with physical identification meeting MIL-STD-130, Rev N standards. To qualify, the provider must possess precision machining equipment and maintain CMMC certification. It is explicitly noted that additive manufacturing is prohibited for these components. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.

POSTED

DEADLINE

Supply of Flat Panel Monitors (NSN 7025-01-738-4182)This subcontract involves the procurement and delivery of 20 flat panel monitors, identified by NSN 7025-01-738-4182, to support prime contractors for DLA Mechanicsburg. The selected provider is responsible for manufacturing or procuring the monitors according to specified Cage Codes, ensuring all items undergo quality assurance and are marked in accordance with MIL-STD-130, REV N. Additionally, all products must be preserved and packed following MIL-STD-2073 guidelines before being delivered to destination PA5CTQ. To qualify, the contractor must provide proof of being an OEM CAGE code holder or an authorized distributor and must maintain CMMC Level 1 self-certification. This requirement falls under NAICS code 334111 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.

Electronic Computer Manufacturing

POSTED

DEADLINE

MIL-STD-2073 Packaging and FulfillmentThis subcontract, managed by the Department of Defense through DLA Mechanicsburg, involves specialized military packaging and fulfillment services for prime contractors. The scope of work focuses on the preparation of VME chassis units, requiring strict adherence to MIL-STD-2073 packaging standards and the application of hazard warning labels in accordance with DFARS 252.223-7001. To ensure the protection of sensitive electronics, the contractor must utilize moisture barriers and anti-static bags. The final deliverable consists of five fully packaged units prepared for shipment to designated points of delivery V21948 and W25G1U. This requirement falls under NAICS code 488410, with a response deadline set for November 25, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

VME Chassis Manufacturing (12-Slot)This subcontract with the Department of Defense, managed by DLA Mechanicsburg, involves the manufacture of five 12-slot VME chassis structures for prime contractors. The project requires the fabrication of enclosures based on design reference 63E920406P3 and the integration of 12 VME card slots. All units must be marked according to MIL-STD-130, REV N standards. The production process necessitates the use of military-grade materials and precision CNC milling and bending equipment. This effort falls under NAICS code 334419, with a response deadline set for November 25, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

CONDUIT ASSEMBLY,ME

Solicitation # SPRMM127QGA28

Solicitation SPRMM1-27-Q-GA28, issued by DLA Mechanicsburg on October 27, 2026, seeks quotes for the manufacture and supply of multiple Conduit Assembly, ME units. The requirement includes specific National Item Identification Numbers (NIINs) and requires the items to be physically identified according to MIL-STD-130, Rev N. The procurement is issued under SEPA-EAF Authority, with delivery expected as soon as possible on a FOB Destination basis. Inspection and acceptance are both designated to occur at the origin. The contract mandates strict adherence to quality and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Offerors must be authorized distributors of the original manufacturer and must provide the Original Equipment Manufacturer (OEM) CAGE code and part number if they are not the manufacturer. Technical acceptability is the primary evaluation factor, with a prohibition on additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with cybersecurity standards under DFARS 252.204-7012 and CMMC certification levels.

POSTED

DEADLINE

CHASSIS,VME,12 SLOT

Solicitation # SPRMM126QMB73

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of five VME 12-slot chassis (NIIN 016433096) based on the design from Cage Code 16331, reference number 63E920406P3. The requirement is split between two delivery locations: one unit for CLIN 0001AA shipping to USS MCFAUL (V21948) and four units for CLIN 0001AB shipping to the DLA Distribution New Cumberland facility (W25G1U). The response deadline has been extended to November 25, 2026, and delivery days have been increased from 30 to 60. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. The contract mandates strict adherence to quality and packaging standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. Inspection and acceptance are designated at the origin, specifically at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically through the Wide Area WorkFlow (WAWF) system. Offerors must be registered in the System for Award Management (SAM) and, if they are not the original equipment manufacturer, must provide the OEM's Cage code and part number. The procurement also includes standard FAR and DFARS clauses regarding the Buy American Act, cybersecurity incident reporting, and the prohibition of certain telecommunications equipment.

POSTED

DEADLINE

MONITOR,FLAT PANEL

Solicitation # SPRMM126QKH35

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of 20 flat panel monitors (NSN 7025-01-738-4182). The procurement will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must provide the Original Equipment Manufacturer (OEM) CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. Technical acceptability may be verified through original quotations, invoices, or contractual agreements from approved sources. The contract requires strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with specific DLR labeling requirements for applicable items. Inspection and acceptance will occur at the origin, and the contractor is responsible for all quality assurance and the maintenance of inspection records for 365 days post-delivery. Payment and invoicing must be processed electronically via PIEE-WAWF using the SPRMM1 DoDAAC. Additionally, the contractor must comply with CMMC Level 1 self-certification and various cybersecurity and trade agreement certifications, including the Buy American Act.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

48--VALVE,REGULATING,FL

Solicitation # SPRMM126QKJ13

The Department of Defense, through DLA Maritime Mechanicsburg, is conducting a sources sought market survey under solicitation SPRMM126QKJ13 for the procurement of 13 regulating valves. The required items are identified by NSN 7H-4820-011728194 and part number 73850-2MOD1. This is a Foreign Military Sales requirement, and the final destination will be provided upon request. The government has determined that it is uneconomical to purchase the data rights or reverse engineer the part, and as such, it does not own the technical data required for the repair or purchase of this item from additional sources. The government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1, though it is currently seeking capability statements and interest from all responsible sources to determine if a competitive procurement is warranted. This action is designated as a total small business set-aside. Interested parties must submit their responses by December 11, 2026. The government is specifically requesting information regarding the commercial status of the item per FAR 2.101(b), typical delivery lead times, and whether FOB Origin and Inspection/Acceptance Origin terms are acceptable. All inquiries and submissions should be directed to Alexander Davies.

POSTED

DEADLINE

in about 1 month

MIL-SPEC Marking and DLR PackagingThis subcontract, titled MIL-SPEC Marking and DLR Packaging, involves providing specialized marking and packaging services for prime contractors under DLA/NAVSUP supply contracts. The scope of work focuses on the physical identification of IMU-NT3 units in accordance with MIL-STD-130 and the application of DLR labels featuring yellow text on a blue background per MIL-STD-129. Additionally, the contractor is responsible for applying specific color-coded SMIC code markings, including L1, S1, and D4/D5/D7. The project requires the execution of palletization and final packaging following MIL-STD-1330 standards to ensure units are ready for transport. Managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the opportunity falls under NAICS code 339999. The response deadline for this requirement is November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Manufacture of Inertial Measurement Unit (IMU-NT3)This subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the precision manufacture of Inertial Measurement Unit (IMU-NT3) hardware components for prime contractors on DLA/NAVSUP supply contracts. The scope of work requires the fabrication and assembly of units in strict accordance with TDP Version 002 and design reference DTS10095-01-002. The contractor must adhere to rigorous quality and regulatory standards, including MIL-STD-130 and MIL-STD-129, while implementing a comprehensive Counterfeit Detection and Avoidance Program (CDAP) to ensure supply chain traceability. Final deliverables consist of completed IMU-NT3 hardware units accompanied by full traceability documentation. The opportunity is categorized under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Solicitation # SPRMM127QGA27

This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture of the IMU-NT3 (NIIN: 016939087) in accordance with the design represented by Cage Code 34NS0 and Technical Data Package version 002. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contract requires strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging, with specific requirements for domestic and overseas shipments. Inspection and acceptance will occur at the origin, with the contractor maintaining primary responsibility for quality assurance and record retention for 365 days following final delivery. The procurement mandates the use of PIEE-WAWF for electronic submission of invoices and receiving reports. Offerors who are not the original equipment manufacturer must identify the OEM and, if acting as a distributor, provide signed proof of authorization on company letterhead. Additionally, any hazardous materials delivered under this contract require the submission of GHS-compliant labels and Safety Data Sheets to NAVSUP WS Code N242 prior to award. The solicitation also incorporates the Federal Acquisition Supply Chain Security Act prohibitions and requires offerors to certify their tax liability and criminal conviction status.

Electronic Connector Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QKG33

SPRMM1 DLA Mechanicsburg

POSTED

about 1 month ago

DEADLINE

N0038326PR0R799_FMS

Solicitation # N0038326QN134

Navsup Weapon Systems Support

POSTED

about 1 month ago

CLOSED

LOS CONTROL ASSEMBL

Solicitation # SPRMM126QKE10

SPRMM1 DLA Mechanicsburg

POSTED

about 1 month ago

DEADLINE

F-16 Recorder Subassembly

Solicitation # SPRHA4-26-C-0046

Ut DLA Aviation At Ogden

POSTED

about 1 month ago

DEADLINE

Supply of Circuit Card Assemblies (NSN 5998-01-533-7722)

MARITIME SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Circuit Card Assembly (NSN: 5998016282855) Supply

MARITIME SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Circuit Card Assembly (CCA) Supplier

MARITIME SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Printed Circuit Board (PCB) Manufacturing

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Electronic Components Supplier

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 month ago

CLOSED

Supply of Fault Locating Indicators (NSN 6625-01-454-5100)

MARITIME SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Circuit Card Assembly (NSN 5998991318340) Production

MARITIME SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Circuit Card Assembly Fabrication and Assembly

MARITIME SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS