This Government Contract opportunity from Department Of Defense was posted on August 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Circuit Card Assembly (CCA) Manufacturing

Closed

Federal

Submission Closed08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418

New

SLED

Manufacturing and Supply of 93.3mm² Static/Ground/Earth WireThis subcontract involves the manufacture and supply of 217,754 units of 93.3mm² Aluminum-Steel static, ground, and earth wire for prime contractors working on California High-Speed Rail Authority projects. The fabrication of these conductors must strictly adhere to SNCF reference 0.841.6742 and IGTE 21461/200014 standards in accordance with EN 50182:2001. To ensure quality and regulatory adherence, the provider is required to perform qualification tests and issue Certificates of Compliance. A critical requirement of this agreement is full Buy America Compliance pursuant to 49 U.S.C § 22905. The performance of the contract is centered in Wasco, California. Interested parties must note the response deadline of November 19, 2026, for this procurement effort categorized under NAICS code 334418.

California High-Speed Rail Authority

POSTED

DEADLINE

Supplier of Telematics Fuel Monitoring Device Kits (Master-System-A)This subcontract, issued by Federal Prison Industries under the Department of Justice, requires the supply of 300 Telematics Fuel Monitoring Device Kits, specifically Part Number KITO759 Master-System-A. Each kit must be complete with fill rings, RFID modules, base modules, 15-foot extension cables, OBD11 cables, wake-up wires, installation hardware, and instructions. All provided equipment must comply with the Buy American, Free Trade Agreements, and Israeli Trade Act regulations. The completed kits are to be delivered to Bastrop, Texas, to support prime contractors on UNICOR Bastrop AIMS Units projects. This opportunity is designated as a total Small Business Set Aside under NAICS code 334418. The response deadline for this requirement is November 4, 2026.

Inc Federal Prison Industries

POSTED

DEADLINE

Circuit Card Assembly Repair and Overhaul ServicesThis subcontract for Navsup Weapon Systems Support involves the overhaul, upgrade, and repair of circuit card assemblies for prime contractors. The scope of work includes detailed inspections, component-level repairs, and the replacement of defective parts for specific NIINs 015123463, 015215180, 016194547, and 016201746. All work must be performed using precision soldering and testing tools in accordance with TDP Versions 001 and 004 to ensure all assemblies are delivered in Ready for Issue condition. The project falls under NAICS code 334418 and requires strict compliance with DFARS Buy American certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 27, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Manufacture of Controller Circuit Card Assemblies (CCA)This subcontract involves the manufacture of Controller Circuit Card Assemblies for prime contractors supporting NAVSUP Weapon System Support projects under the Department of Defense. The selected provider will be responsible for fabricating circuit cards according to CAGE code 305S9 specifications, assembling electronic components using both SMT and through-hole equipment, and ensuring all physical marking adheres to MIL-STD-130, REV N. A critical requirement of the contract is the implementation of counterfeit detection and avoidance protocols to ensure component integrity. The project falls under NAICS code 334418 and is managed by the SPRMM1 DLA Mechanicsburg agency. Responses for this opportunity are due by November 30, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Instrumentation Component SupplyThis subcontract for Instrumentation Component Supply involves the sourcing and procurement of miscellaneous instrumentation spare parts for prime contractors serving the Oil and Gas Development Company Limited (OGDCL) KPD TAY PLANT in Pakistan. The scope of work includes providing OEM or approved equivalent sensors, transmitters, gauges, controllers, and valves, ensuring that all supplied components adhere to plant technical specifications and PPRA rules. The contractor is responsible for the complete delivery of the shipment to the designated OGDC facility. Interested parties must submit their responses by the deadline of November 11, 2026, for this project categorized under NAICS code 334418.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Circuit Card Assembly (CCA) Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies for the MD-1286/SPN-43C Radar Modulator, supporting NAVSUP Weapons Systems Support radar projects for the Department of the Navy. The contractor is responsible for fabricating PCBs and assembling electronic components in strict accordance with TDP Version 007. The project requires the delivery of three completed assemblies, emphasizing rigorous quality control through 100% material traceability and UID markings as mandated by DFARS 252.211-7003. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 334418, with all final deliveries requiring comprehensive traceability documentation.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Circuit Card Assembly Repair and Modification ServicesThis subcontract for Circuit Card Assembly Repair and Modification Services supports NAVSUP Weapon Systems Support projects for the Department of the Navy. The scope of work involves the teardown, evaluation, repair, and modification of specific Circuit Card Assemblies, identified by NIIN 200098692. The selected provider will be responsible for disassembling assemblies to locate failed components, performing repairs according to technical orders and manufacturer specifications, and conducting final inspection and testing to deliver fully functional units. Performance will take place in Mechanicsburg, Pennsylvania, and requires the use of electronics diagnostic equipment and precision soldering stations. To be eligible, the contractor must meet CMMC requirements. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 334418.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of Special Purpose Electrical Cable AssembliesThis subcontract involves the manufacturing of high-precision, special-purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the fabrication of assemblies specifically to NSN 5995-01-693-3733 and Kongsberg P/N 60269836-02 specifications. All deliverables must adhere to Critical Application Item quality standards and DLA Master List requirements, with the final delivery consisting of completed and warranted cable assemblies. To be eligible for this contract, providers must hold approved source status or possess written authority from Kongsberg. The opportunity is categorized under NAICS code 334418 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electronics Fabrication of Frequency Module AssembliesThis subcontract, managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, involves the precision assembly and fabrication of frequency module assemblies. The scope of work specifically includes PCB assembly and component integration for Hamilton Sundstrand part number 690416. All deliverables must undergo rigorous testing and quality sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure compliance and security, the contractor must maintain CMMC Level 2 certification and adhere to MIL-STD-129 and ASTM D3951 for packaging and marking. The final deliverables consist of completed, tested, and packaged Frequency Module Assemblies to be performed at Hill AFB. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Circuit Card Assembly (P/N 9800-96605-0002) SupplyThis subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the supply of five units of Circuit Card Assembly, part number 9800-96605-0002. These assemblies, identified by NSN 5998016919292, are intended for prime contractors working on DoD and MARAD projects. The selected provider must utilize appropriate circuit board fabrication and assembly equipment to manufacture or source the units. The contract mandates strict adherence to Critical Application Item quality standards and requires compliance with specific defense telecommunications equipment restrictions. Performance for this requirement is located in Tracy, California, under NAICS code 334418. Responses to this solicitation are due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of three special purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to produce the assemblies according to NSN 5995-01-545-7010 and Amentum P/N 127267-10, ensuring all items are marked per RQ017. Quality assurance must be maintained through sampling and inspection conducted in accordance with MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and maintain compliance with DFARS Buy American regulations. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flame Retardant Tape (4 Inch 398FR)This subcontract involves the supply of 8,000 rolls of 4-inch flame retardant tape for prime contractors supporting the Department of Defense. The materials must strictly adhere to the 398FR flame retardancy specification and correspond to NSN 7018900979. The final order is to be delivered to the designated DLA destination in Cherry Point, North Carolina. Eligible providers must maintain an active SAM registration, including a valid Unique Entity ID and CAGE code. This opportunity is managed by the DLA Fleet Readiness Center DLA PSC under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 24 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract requires the manufacture, testing, and delivery of three circuit card assemblies identified by NSN 5998-01-609-8286, with strict adherence to military performance and quality standards and full compliance with U.S. export control regulations. The work must be performed to meet the technical and procedural requirements expected for defense-related electronic components, ensuring reliability and interoperability within military systems. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where the components will be produced and verified. This is a subcontract solicitation issued under NAICS code 334418, which covers other electronic component manufacturing, and is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 11, 2026, indicating a tight timeline for proposers to submit technical and business offers. The contract is not subject to a specific set-aside designation, making it open to all qualified subcontractors, and must comply with all applicable federal defense contracting requirements, including supply chain security and data handling protocols associated with defense electronics.

General Info

Manufacture, test, and deliver three military-grade circuit card assemblies in New Cumberland, Pennsylvania, complying with defense and export regulations.

Agency

Department Of Defense → ACTIVE DEVICES DIVISION

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE