Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

CIRCUIT CARD ASSEMBLY

Active
SPE7M1-27-T-1094Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M1-27-T-1094 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for four units of a Circuit Card Assembly, identified by NSN 5998015458347. The approved source is 0BXF1 A-57211-1. Quotes must be submitted electronically via DIBBS by October 30, 2026, and are evaluated under NAICS code 334418. The procurement may be a candidate for automated award, and the government will not consider items produced using additive manufacturing. The contract requires strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, with mandatory DOD qualified ESD and EMI protective materials per MIL-PRF-81705. Delivery is set for 157 days after award, with inspection and acceptance occurring at the destination. Compliance with the Buy American Act and Berry Amendment is required for quotes exceeding the micro-purchase threshold. Invoicing must be processed through the Wide Area WorkFlow system. Primary administration is handled by Ryan Snyder at the DLA Weapons Support Maritime Supply Chain office in Columbus, Ohio.

General Info

Fixed-price procurement for four circuit card assemblies for DLA Weapons Support Maritime.

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE7M1-27-T-1094

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA

Full Description

Show more
CIRCUIT CARD ASSEMBLY
CIRCUIT CARD ASSEMBLY
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
BOGUE SYSTEMS INC 0BXF1 P/N A-57211-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018677313 0001 EA 4.000
NSN/MATERIAL:5998015458347
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
SPE7M1-27-T-1094
SECTION B
PR: 7018677313 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:K3 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE7M1-27-T-1094
SECTION B
PR: 7018677313 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/06/2027 Original Required Delivery Date:05/09/2027
SPE7M1-27-T-1094 NSN/Part Number: 5998-01-545-8347 Quantity: 4 EA Purchase Request: 7018677313QTY: 4 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, STAN
Solicitation # SPE7M5-27-T-0997
Solicitation SPE7M5-27-T-0997, issued by the DLA Weapons Support Active Devices Division, is for the procurement of one standardized electronic module, identified by NSN 5963013531602 and Key Code CZJ. The requirement specifies a delivery timeline of 20 days with a required delivery date of October 13, 2026, shipped FOB Destination to the USS SEAWOLF SSN 21. The procurement is subject to strict quality and environmental standards, including a prohibition on Class I ozone-depleting substances and the intentional addition of mercury. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and acceptance is based on zero non-conformances using sampling methods per MIL-STD-1916 or ASQ H1331. Critical technical requirements include mandatory DOD qualified Electrostatic Discharge and Electromagnetic Interference protective packaging per MIL-PRF-81705, with specific barrier materials from QPL-81705 manufacturers to prevent damage to leads and terminals. Marking must adhere to MIL-STD-129 with special marking code 39 for ESD sensitivity. Administratively, the contract requires CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for invoicing. Quotations are due by October 26, 2026, and must be submitted to the issuing office in Columbus, Ohio.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-27-T-1005
Solicitation SPE7M1-27-T-1005 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 13 spring-loaded shaft seal assemblies, identified by NSN 4320-01-439-0131. This is a restricted source, critical application item requiring engineering source approval from the government design control activity, specifically referencing Shapes Group Ltd Co. part number 5750008-003. The required delivery date is October 17, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 168 days. Delivery is to be made to DLA Distribution San Diego, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specifies packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with various FAR and DFARS clauses, including those regarding cybersecurity (DFARS 252.204-7012), the Buy American Act, and the Berry Amendment. Quotations must be submitted through the DIBBS portal by October 26, 2026.
Fluid Power Pump and Motor Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS