Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CIRCUIT CARD ASSEMBLY

Active
SPE7L4-26-T-6669Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as solicitation SPE7L4-26-T-6669, is issued by the Department of Defense LSO Combat Vehicles and Armament for the procurement of two circuit card assemblies, part number 92469 from Stewart and Stevenson Power Products LLC. The items are identified by NSN 5998-01-415-5158 and are destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Delivery is required within five days after receipt of order, with an original required delivery date of September 2, 2026. The contract mandates strict adherence to DLA packaging requirements, specifically emphasizing electrostatic discharge and electromagnetic interference protection in accordance with MIL-PRF-81705. It incorporates technical and quality requirements from the DLA Master List and specifies that MIL-PRF-31032 should be utilized for printed circuit boards. Additionally, the contract requires a Cybersecurity Maturity Model Certification Level 2 self-assessment and the application of covered defense information protocols. Inspection and acceptance are to take place at the point of origin, with shipping handled as FOB Origin.

General Info

DoD buys two circuit card assemblies from Stewart and Stevenson for delivery in Taiwan.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-6669 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUSA
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT CARD ASSEMBLY
CIRCUIT CARD ASSEMB
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING
BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110)
OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT
MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS
PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN
REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL
BECOME INACTIVE FOR NEW DESIGNS AND REPLACED
BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO
EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S
13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS
THAT THE CONTRACTOR HAVE A METHOD OF ASSURING
THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH
DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY
AND RELIABILITY TO THAT WHICH WAS AVAILABLE
PRIOR TO THE CANCELLATION OF MIL-S-13949 ON
NOVEMBER 30, 1998.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
STEWART & STEVENSON POWER PRODUCTS LLC 81381 P/N 92469
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018112963 0001 EA 2.000
SPE7L4-26-T-6669
SECTION B
PR: 7018112963 PRLI: 0001 CONT’D
NSN/MATERIAL:5998014155158
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
PTWB00
GENERAL DEPOT OF NAVAL SUPPLIES
SPE7L4-26-T-6669
SECTION B
PR: 7018112963 PRLI: 0001 CONT’D
NO.2186, CUIHUA RD., ZUOYING DIST
E-6, XIE,YUN-DA 886-7-5874861
KAOHSIUNG CITY
TW
MARKFOR
PTWB00
GENERAL DEPOT OF NAVAL SUPPLIES
NO.2186, CUIHUA RD., ZUOYING DIST
E-6, XIE,YUN-DA 886-7-5874861
KAOHSIUNG CITY
TW
M/F: (TCN) PTWB5V62390111
RDD:
PROJ: TP 1
SUPP ADD: PA4KNC SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026
SPE7L4-26-T-6669 NSN/Part Number: 5998-01-415-5158 Quantity: 2 EA Purchase Request: 7018112963QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M2-26-T-6579
This contract is for the procurement of 37 units of a circuit card assembly, specifically Rockwell Automation part number 1769-IF8 (NSN 5998-01-537-0016). The order is designated as a critical application item with a delivery timeline of 166 days after receipt of order, with a required delivery date of May 26, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including a prohibition on the intentional addition of mercury. There are extensive requirements for electrostatic discharge and electromagnetic interference protective packaging in accordance with MIL-PRF-81705 to prevent damage to leads and terminals. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the supplier is responsible for ensuring all barrier materials are sourced from qualified manufacturers on the QPL-81705 list.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-6360
This contract, identified as SPE7M8-26-T-6360, is a solicitation for the procurement of five flow switches under NSN 5930-00-315-2625. The requirement is designated as a critical application item and lists several approved manufacturers and part numbers, including Thales SA, L3Harris Technologies, Rockwell Collins, and Alcatel-Lucent International. The delivery is required within 20 days after order, with a final required delivery date of March 3, 2026, shipping FOB Origin to Cavalier SFS in North Dakota. The agreement incorporates specific DLA technical and quality requirements, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. It strictly prohibits the use of Class I ozone-depleting chemicals and mandates that packaging comply with MIL-STD-129 and ASTM D3951, unless otherwise specified by DLA master lists. The contract specifies a zero percent quantity variance and designates both the inspection and acceptance points at the destination.
ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
PRINTED CIRCUIT BOARD
Solicitation # SPE7M0-26-T-064Y
This contract is for the procurement of two printed circuit boards, part number 4220P087-1, under solicitation number SPE7M0-26-T-064Y. The agreement requires strict adherence to DLA packaging standards, including specific electrostatic discharge and electromagnetic interference protections using MIL-PRF-81705 materials. Technical specifications recommend the use of MIL-PRF-31032 for new designs and prohibit the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. The contract mandates compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and the handling of covered defense information. Delivery is set for five days after receipt of order, with the shipping destination designated as the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance will occur at the point of origin, and all marking must comply with MIL-STD-129.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
ELECTRONIC COMPONENTS
Solicitation # SPE7M0-26-T-065A
This contract, identified as SPE7M0-26-T-065A, is for the procurement of one electronic component assembly, part number 511-01209-60, with NSN 5998-01-335-4451. The order is issued by the Department of Defense under the Maritime Supply Chain ESOC Buys agency. Delivery is required within five days after receipt of the order, with a required delivery date of September 2, 2026. The item is to be delivered FOB Origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and the prohibition of intentionally added mercury. Specific packaging standards are required, emphasizing electrostatic discharge and electromagnetic interference protection in accordance with MIL-PRF-81705. The supplier must ensure that all barrier materials are sourced from qualified manufacturers on the QPL-81705 list to prevent damage to the component's leads and terminals.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M0-26-T-065H
This contract, solicitation number SPE7M0-26-T-065H, is issued by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one circuit card assembly, identified by NSN 5998-01-529-6913. The requirement specifies parts from Furuno U.S.A Inc, specifically part numbers 001-191-680-00 and 004-655-910. Delivery is required within five days after receipt of the order, with the destination set as the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The contract is governed by NAICS code 334418 and requires compliance with CMMC Level 2 self-assessment and the handling of covered defense information. Strict technical and quality standards apply, including DLA packaging requirements and the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required. Because the item is an electrostatic discharge sensitive electronic device, it must be packaged using DOD qualified ESD and EMI protective materials in accordance with MIL-PRF-81705 and MIL-STD-129. Inspection and acceptance will occur at the point of origin, and the supplier must ensure all barrier materials are sourced from a qualified manufacturer on the QPL-81705 list.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M1-26-U-5610
This contract, identified as SPE7M1-26-U-5610, is for the procurement of 83 units of pressure switches under NSN 5930-01-168-0775. The items are designated as critical application components and must adhere to the Qualified Products List or Qualified Manufacturers List. Technical specifications are governed by MIL-DTL-9395/40E and MIL-DTL-9395L, with a specific part piece number of M9395/40-AQ9MQ. Delivery is required within 158 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 or non-hazardous materials following ASTM D3951. The contract also mandates strict adherence to configuration change management and the removal of government identification from non-accepted supplies.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
DIBBS
CYLINDER
Solicitation # SPE7M4-26-T-374V
This solicitation, identified as SPE7M4-26-T-374V, is issued by the Department of Defense Fluid Handling Division for the procurement of 13 cylinders under NSN 2040-00-385-8944. The contract is a Foreign Military Sales requirement for the Government of Israel Ministry of Defense. Delivery is required within 20 days after receipt of the order, with an original required delivery date of September 2, 2026. The procurement falls under NAICS code 334418 and specifies that inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, emphasizing the avoidance of plastics for wrapping and cushioning where possible. It includes specific environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds, except for specified functional components. Technical and quality requirements are governed by the DLA Master List, and the solicitation requires quotes to be submitted via the DLA Internet Bid Board System.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
Federal
LIPTM00149 - ASE - ASE-25-021 - SSEE REDWOOD Peregrine - SEWP V (C)The SSEE Redwood Peregrine contract, identified as LIPTM00149, is a forecast opportunity issued by the Naval Information Warfare Systems under the Niwc Atlantic agency. This procurement is associated with the SEWP V vehicle and falls under NAICS code 334418. The primary place of performance for this project is located in Charleston. Administrative oversight for the contract is managed by Contracting Officer Martha Leya, with Michelle Pierce serving as the secondary point of contact. The forecast was posted on August 30, 2026, as part of the agency's long range acquisition planning.
Niwc Atlantic

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 334418
New
DIBBS
Domestic Supply of Raw Materials or Components
ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 334418
New
DIBBS
High-Reliability Electronic Component ManufacturingThis subcontract involves the manufacture and delivery of six high-reliability electronic components under NSN 5895-01-447-6061 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The components must strictly adhere to military specifications, packaging standards, and origin inspection requirements. The opportunity was posted on August 28, 2026, with a response deadline of September 17, 2026. Classified under NAICS code 334418, the contract focuses on specialized electronic component manufacturing to meet rigorous defense standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 18 days
View Details
NAICS: 334418
New
DIBBS
Supply of Electronic Component (NSN 5965004216440)
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334418
New
DIBBS
Component and Raw Material Supply for Power Units
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
ADAPTER, TOWBAR, VEHI
Solicitation # SPE7L4-26-T-6648
This contract is for the procurement of one vehicle towbar adapter, identified by NSN 2540016897844 and Mack Defense LLC part number 23931396. The order is issued under solicitation SPE7L4-26-T-6648 with a required delivery date of August 27, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin, with inspection and acceptance occurring at the destination in Prince Sultan Air Base, Saudi Arabia. The agreement mandates strict adherence to DLA technical and quality requirements, specifically prohibiting the use of Class I ozone-depleting chemicals. Packaging must comply with RP001 and MIL-STD-129, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-6654
This contract is a solicitation for the procurement of seven bracket assemblies for the Department of Defense, specifically the LSO Combat Vehicles and Armament agency. The order requires delivery within 386 days after order and is subject to strict technical and quality standards, including the use of qualified products or manufacturers lists and specific phosphate coating supplier certifications. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and the contract prohibits the use of class I ozone depleting chemicals. Security and regulatory compliance are central to this agreement, requiring CMMC Level 2 certification and adherence to covered defense information protocols. The items are subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, the contract mandates specific protocols for demilitarization of small arms parts, configuration change management, and the use of approved measuring and test equipment.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
REGULATOR, ENGINE
Solicitation # SPE7L4-26-U-1177
This solicitation from the Department of Defense, specifically the LSO Combat Vehicles and Armament agency, is for the procurement of six engine regulators under NSN 2920-01-175-8904. The contract requires delivery within 69 days after the order is placed and falls under NAICS code 336320. The agreement is subject to several strict technical and quality requirements, including specific DLA packaging standards, configuration change management, and physical item marking. Notably, the technical data for this item is subject to ITAR or EAR export controls, meaning access is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
ROD, DOOR CHECK, VEHI
Solicitation # SPE7L4-26-T-6662
This contract, identified as SPE7L4-26-T-6662, is a solicitation for the procurement of 26 vehicle door check rods under NSN 2510-01-675-0382. The items are associated with Oshkosh Defense LLC part number 12609788. Delivery is required within 153 days, with a required delivery date of February 11, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the manufacturing of these items. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
MOTOR, WINDSHIELD WIPER
Solicitation # SPE7L4-26-U-1178
This contract, identified as SPE7L4-26-U-1178, is a solicitation for the procurement of 83 electric windshield wiper motors, specifically part number A22-45492-001 from Daimler Truck North America LLC. The items are identified by NSN 2540-01-479-1522 and are to be delivered within 80 days. The agreement is a total small business set-aside under NAICS code 336390, with the Department of Defense's LSO Combat Vehicles and Armament serving as the agency. The contract mandates strict adherence to DLA packaging requirements and technical quality standards, including the prohibition of Class I ozone-depleting chemicals. Delivery is set as FOB Origin, while both inspection and acceptance will occur at the destination. Packaging must comply with MIL-STD-129 and ASTM D3951, unless the material is deemed hazardous, in which case specific technical requirement IP025 applies.
Other Motor Vehicle Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
DIBBS
RESERVOIR, HYDRAULIC
Solicitation # SPE7L4-26-T-6653
This solicitation, issued by the Department of Defense under the agency LSO Combat Vehicles and Armament, is for the procurement of 10 hydraulic reservoirs identified by NSN 4320-01-422-2579. The contract is a total small business set-aside under NAICS code 333914, with a required delivery timeframe of 165 days after the order is placed. The agreement is subject to strict technical and quality requirements, including DLA packaging standards, configuration change management, and inspection at origin. Notably, the item contains components that must adhere to Qualified Products Lists or Qualified Manufacturers Lists. Furthermore, the contract involves covered defense information and technical data subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and completed specific DOD training to access the data.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
INSERT, PULLEY
Solicitation # SPE7L4-26-T-6649
This contract is for the procurement of one pulley insert, identified by NSN 3020015159838, under solicitation number SPE7L4-26-T-6649. The item must adhere to technical specifications MIL-DTL-25988/3A Revision A and MIL-DTL-25988D, with a required delivery date of July 31, 2026, and a delivery window of 20 days after the order. Inspection and acceptance will occur at the point of origin. The agreement mandates strict compliance with DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the production or delivery of the items. Shipping must be handled via traceable means to the designated medical company address in Centreville, Alabama, and must not be sent via parcel post.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SPECIAL
Solicitation # SPE7L4-26-T-6656
This contract is a solicitation for the procurement of 21 special bolts, identified by NSN 5306013082363 and BAE Systems part number 100559-1. The requirement is issued by the Department of Defense under solicitation number SPE7L4-26-T-6656. Delivery is required within 158 days, with a need ship date of February 16, 2027, and an original required delivery date of February 16, 2028. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required per RQ011. Inspection and acceptance will take place at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CHAIN, ROLLER
Solicitation # SPE7L4-26-T-6655
This contract is for the procurement of 58 packages of steel roller chain, identified by NSN 3020-00-252-7349 and part number 50-2. The chain features a 0.625 inch pitch, flat link, double strand, and single pitch design, conforming to American National Standards for precision power transmission. Each package consists of 132 pitches, and the material must be issued in 10 foot increments without being spooled. This is designated as a critical application item. Delivery is required within 115 days, with a need ship date of January 4, 2027, and a final required delivery date of February 6, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. Additionally, the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging, except for specific functional exceptions.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-6670
This solicitation is for the procurement of 212 right-hand black rearview mirror assemblies under NSN 0001S00000053. Issued by the Department of Defense through the LSO Combat Vehicles and Armament agency, the contract is a total small business set-aside with a delivery requirement of 244 days after receipt of order. Performance is designated for Tracy, California. The contract mandates strict adherence to DLA master technical and quality requirements, including specific packaging standards and inspection at origin. It requires compliance with Covered Defense Information and export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, the item may contain components requiring Qualified Products List or Qualified Manufacturers List certification.
Other Motor Vehicle Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
PARTS KIT, SEAT, VEHI
Solicitation # SPE7L4-26-T-6663
This solicitation, identified as SPE7L4-26-T-6663, is issued by the Defense Logistics Agency for the procurement of one vehicle seat parts kit under NSN 2540-01-702-5750. The contract requires delivery within 158 days after the order is placed and falls under NAICS code 336360. Performance is designated for New Cumberland, Pennsylvania. The contract mandates strict adherence to several technical and quality standards, including CMMC Level 2 certification and DLA packaging and inspection requirements. A certificate of conformance is required, and the supplier must comply with configuration change management and qualified products list regulations. Additionally, the contract is subject to stringent export controls under ITAR and EAR, requiring contractors to have approved JCP certification and completed specific Department of Defense training to access technical data.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
TARPAULIN
Solicitation # SPE7L4-26-T-6660
This contract is for the procurement of six tarpaulins, identified by NSN 2540017104922 and part number 15664 from Transhield, Inc. The agreement is managed by the Department of Defense under solicitation SPE7L4-26-T-6660, with a required delivery date of February 21, 2027. Delivery is set for 163 days after order, with shipping and acceptance occurring at the destination in Jacksonville, Florida. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. All shipments must comply with RP001 packaging requirements and are to be delivered to DLA Distribution Jacksonville.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details