Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Civil and Structural Steel Erection

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Civil and Structural Steel Erection, issued by the Department of Defense through the W076 Endist Tulsa agency, focuses on the installation of critical infrastructure for Tainter gates. The scope of work includes the erection of support frames, anchorages, and guide structures, as well as essential preparatory and finishing tasks such as foundation preparation, grouting, and alignment verification. The project is categorized under NAICS code 238120 and is scheduled for posting on April 1, 2026. Performance of the contract will take place in the 74470 zip code area, ensuring the structural integrity and precise positioning of the gate systems.

General Info

DoD subcontract for civil and structural steel erection of Tainter gate infrastructure.

Agency

Department Of Defense → W076 Endist Tulsa

NAICS

238120 - Structural Steel and Precast Concrete Contractors

Place of Performance

OK, 74470

Set-Aside

NONE

Documents

This scope was carved out of W912BV25RA018.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Webbers Falls Tainter Gate Replacement and Repair

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 1

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W076 Endist Tulsa

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W076 Endist Tulsa

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Erection of support frames, anchorages, and guide structures for Tainter gates, including foundation preparation, grouting, and alignment verification.

Similar Contracts

Same NAICS industry code

Structural and Architectural MetalsThis subcontract for Structural and Architectural Metals involves the fabrication and installation of structural steel and decorative metal deterrents for facility projects at the University of Baltimore. The selected contractor will work under prime contractors to deliver steel framing and architectural metalwork, ensuring all installations comply with Division 05 and Division 05 70 30 standards. The opportunity was posted on October 28, 2026, with a response deadline of December 2, 2026. Classified under NAICS code 238120, the project focuses on essential metal infrastructure and specialized deterrents across the university campus in Maryland.

University of Baltimore

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Structural Steel ErectionThis subcontract for structural steel erection involves the supply and installation of the structural steel frame for an athletic performance addition at the Mississippi Gulf Coast Community College in Perkinston, MS. The selected contractor will be responsible for the hoisting, bolting, and welding of all structural members in strict accordance with engineering specifications to deliver the completed structural skeleton of the facility. The project is categorized under NAICS code 238120 and is managed through MPTAP. Interested parties should note the tight turnaround for responses, with the solicitation posted on October 28, 2026, and the response deadline set for October 29, 2026.

POSTED

about 10 hours ago

DEADLINE

in about 15 hours

Provision of Structural Repairs and Planned Maintenance to Blackpool Tower Winter 2026/7 and Summer 2027

Solicitation # ocds-h6vhtk-078f6c

Blackpool Borough Council is seeking a qualified Remedial Works Supplier to provide structural repairs and planned maintenance for Blackpool Tower, with an estimated total value of 4,000,000 GBP including VAT. The project is divided into three phases: a Winter Works package from November 2026 to March 2027 during operational closure, a Summer Works package from April 2027 to November 2027 during the operating season, and ongoing ad-hoc maintenance beyond November 2027 based on annual surveys. The initial period of performance runs from November 30, 2026, to November 29, 2027, with a possible one-year extension to November 29, 2028. The contract is an open competition with award criteria weighted at 50 percent Quality, 40 percent Price, and 10 percent Social Value. Mandatory requirements include IRATA level 3 qualified supervisors, IRATA level 1 or 2 technicians, and project managers who are Chartered Members of the Institution of Civil Engineers or Institution of Structural Engineers. Suppliers must maintain insurance coverage of 10 million GBP for Employer's Liability and Public Liability, and 5 million GBP for Professional Indemnity. All work must adhere to strict technical and safety standards, including BS EN 1090 Execution Class 3 for steel structures, CDM 2015, and the Work at Height Regulations 2005. The deadline for tender submissions is November 20, 2026.

Blackpool Borough Council

POSTED

about 12 hours ago

DEADLINE

Certified Welder / Steel Repair ContractorThis subcontract opportunity is for a Certified Welder or Steel Repair Contractor to perform specialized welding repairs for the Town of Hopkinton DPW tank projects. The selected contractor will work under prime contractors to remediate corrosion and metal loss on welded steel tank bodies and related components. The scope of work specifically requires the execution of pit and fill welding using AWS-certified methods to ensure all repaired surfaces are free of structural defects and corrosion pits. Strict adherence to safety regulations is mandatory, including OSHA standards for confined spaces and welding safety. Interested parties must submit their responses by November 18, 2026. This project falls under NAICS code 238120 and is focused on delivering high-quality structural remediation for municipal infrastructure in Massachusetts.

Town of Hopkinton

POSTED

about 14 hours ago

DEADLINE

Structural Steel and MetalsThis subcontract for Structural Steel and Metals involves the fabrication and erection of a structural steel frame for a school addition project under the Henry County Board of Education in Georgia. The selected contractor will be responsible for installing essential components, including steel beams, columns, joists, and metal decking, to deliver a completed structural steel skeleton for the prime contractor. The opportunity was posted on October 28, 2026, with a response deadline of December 3, 2026. Classified under NAICS code 238120, this project focuses on specialized structural steel work to support the expansion of educational facilities within Henry County.

Henry County Board of Education

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Marine Metal Fabrications & Mooring SystemsThis small business set-aside subcontract, titled Marine Metal Fabrications and Mooring Systems, involves the fabrication and installation of structural metal components for prime contractors working on USACE Detroit District marine projects. The scope of work specifically includes the delivery and installation of mooring bollards, bollard anchors, metal ladders, and grab rails. Due to the nature of the installation, the contractor must provide certified welding services and utilize heavy lifting equipment for the precise placement of bollards. Managed by the Department of Defense under the W072 Endist Detroit agency, the project falls under NAICS code 238120. The solicitation was posted on October 28, 2026, with a response deadline of December 1, 2026. Performance of the contract is centered in the 55802 zip code area, focusing on the delivery of critical mooring and safety hardware.

W072 Endist Detroit

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Metal and Wood Structural FramingThis subcontract opportunity involves the fabrication and installation of metal and wood structural elements for prime contractors working on United States Air Force facility projects at Wright-Patterson Air Force Base. The scope of work specifically covers cold-formed metal framing under Division 05 40 00 and rough carpentry and wood framing under Division 06 10 00, with a primary focus on delivering structural framing and interior wall supports. Managed by the Department of Defense under the AFLCMC PZIO agency, this project is designated as a total Small Business Set Aside under NAICS code 238120. The solicitation was posted on October 28, 2026, with a response deadline set for December 11, 2026. Performance of the contract will take place within the 45433 zip code area.

FA8601 Aflcmc Pzio

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Structural Metals and RailingsThis 8(a) set-aside subcontract, managed by Navfacsyscom Mid-Atlantic for the Department of Defense, involves the fabrication and installation of structural steel and metal railings at Building 592 in Philadelphia. The scope of work requires the delivery of installed structural steel frames and safety railings, utilizing carbon structural steel, zinc-coated pipe, and hot-dip galvanized coatings. All welding and installation must strictly adhere to AISC and AWS D1.1 standards. The opportunity is categorized under NAICS code 238120. Interested parties should note that the response deadline is December 1, 2026. The project focuses on providing high-quality metal components for prime contractors operating on USACE/NAVFAC facility projects.

Navfacsyscom Mid-Atlantic

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Pre-Engineered Metal Buildings (PEMB) Fabrication & ErectionThis subcontract opportunity involves the fabrication and erection of pre-engineered long-span metal buildings for prime contractors supporting NAVFAC Mid-Atlantic projects. The scope of work specifically requires the installation of low-rise structures and structural columns for the GSE Warehouse and the MSU Compound at MCAS Cherry Point, with the final deliverable being the completed structural shells. The project falls under NAICS code 238120 and is associated with the Department of Defense. Interested parties should note that the response deadline is November 12, 2026, for work to be performed in Cherry Point, North Carolina.

Navfacsyscom Mid-Atlantic

POSTED

about 16 hours ago

DEADLINE

Corpyard Phase II Connex Structural Anchoring & Welding: (Rebid)

Solicitation # 26-091-ITB

The City of West Sacramento has issued solicitation 26-091-ITB for the Corpyard Phase II project, which requires the structural anchoring and welding of 14 existing shipping containers to a cement-treated asphalt surface. The scope of work includes container pre-checks, drilling and hole cleaning, the installation of Bolthold asphalt substrate, bolting down ASTMA36 plates using epoxied steel rods, and performing AWS welding to secure the plates to the container framing. To prevent corrosion, the contractor must apply a zinc-rich cold galvanizing rust-inhibiting coating. All work must be performed by a licensed contractor holding a current California C-51 or C-60 license and must adhere to PSE stamped drawings, structural calculations, and standards including ASCE 7-22, CBC 2022, and AISC 360-16. Final acceptance is contingent upon a successful inspection by the City's Building department. The estimated project value is 35,000 dollars, and the contract will be awarded to the lowest responsive and responsible bidder. Bids must be submitted electronically via the OpenGov portal by November 10, 2026, at 1:00 pm, and must include a bid security of at least 10 percent of the total bid price. The successful bidder is required to provide performance and payment bonds equal to 100 percent of the contract price and must comply with California prevailing wage requirements and DIR registration. Additionally, the contractor must utilize the Virtual Project Manager system for submittals and maintain comprehensive insurance coverage, including Commercial General Liability and Workers Compensation. As a federal-aid construction project, the contract mandates strict adherence to FHWA-1273 provisions, including nondiscrimination and equal employment opportunity policies.

Capital Projects - Construction

POSTED

about 16 hours ago

DEADLINE

EVA DELL BARRIER ACCESS GATES

Solicitation # MS27-052

The City of Victorville is soliciting competitive bids under solicitation MS27-052 for the fabrication and installation of four steel barrier access gates at Eva Dell Park. The project requires a licensed C-13 contractor to provide all labor and materials to install one 31-foot gate, one 35-foot gate, and two 37-foot gates, all constructed from Schedule 40 steel pipe. The contract will be awarded to the lowest responsible bidder who attends the mandatory pre-bid meeting and site walk held on November 10, 2026. Final responses are due by December 3, 2026. As a project funded by the Community Development Block Grant (CDBG) program, strict compliance with the Davis-Bacon Act and California state prevailing wage laws is required, with the higher of the two rates applying. Contractors must submit weekly certified payroll reports using Form WH-347 and adhere to Build America, Buy America (BABA) provisions and California Air Resources Board regulations. Additionally, the successful bidder must divert at least 65 percent of non-hazardous construction and demolition debris from landfills. Financial security requirements include a bid guarantee of at least 10 percent of the total proposal amount, with the winning contractor required to provide Faithful Performance and Payment Bonds for 100 percent of the contract price. The contractor must also provide a guaranty bond covering defective materials or workmanship for twelve months following City acceptance. Compliance with the Americans with Disabilities Act (ADA) and various federal and state non-discrimination and affirmative action policies is mandatory.

City of Victorville

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Pipe and Tube Railing InstallationThis subcontract agreement involves the supply and installation of pipe and tube railings for DPA Capital Construction projects located in Denver, Colorado. The selected contractor is responsible for delivering and installing safety railings at the entrance area in strict accordance with Section 05 52 13 and all applicable ADA accessibility requirements. The opportunity is categorized under NAICS code 238120 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 6, 2026.

DPA - Capital Construction/controlled Maintenance

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → W076 Endist Tulsa

Same awarding agency

Electrical Engineering and As-Built DraftingThis subcontract opportunity, titled Electrical Engineering and As-Built Drafting, is issued by the Department of Defense for the USACE Tulsa District. The project focuses on providing prime contractors with final record drawings and comprehensive technical documentation for facility projects. The primary scope of work involves drafting final record drawings that accurately reflect field changes made to electrical infrastructure. The contract is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must submit their responses by the deadline of December 3, 2026. The ultimate goal of the engagement is the successful delivery of finalized Record Drawings to ensure accurate facility documentation.

Engineering Services

POSTED

DEADLINE

in about 1 month

Electrical Testing and CommissioningThis subcontract opportunity, titled Electrical Testing and Commissioning, is issued by the Department of Defense for the USACE Tulsa District. The selected contractor will provide independent testing and verification of electrical systems for prime contractors, specifically focusing on the commissioning of transformers and switchgear. Key responsibilities include managing outage sequencing and ensuring all work adheres to NETA ATS and IEEE 1248 standards, culminating in the delivery of final system verification and commissioning reports. The project is designated as a total Small Business Set Aside under NAICS code 238210. Interested parties must submit their responses by the deadline of December 3, 2026. This engagement is critical for ensuring the operational integrity and safety of electrical infrastructure within the Tulsa District facility projects.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Specialized Electrical Installation and CablingThis small business set-aside subcontract involves specialized electrical installation and cabling for the Department of Defense under the USACE Tulsa District. The selected contractor will be responsible for installing medium-voltage cables, terminations, and grounding systems for prime contractors on facility projects. Specific technical requirements include the installation of 15kV 2,750 kcmil solid dielectric cables, potheads, and cable trays in strict accordance with NFPA 70 and NECA 101 standards. To qualify for this project, the contractor must hold NETA ATS certification to ensure the delivery of a fully installed and terminated 15kV cabling and grounding system. The opportunity is categorized under NAICS code 238210, with a response deadline set for December 3, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Low-Voltage Switchgear and Grounding EquipmentThis small business set-aside subcontract involves the manufacture and supply of low-voltage switchgear and grounding equipment for prime contractors working on USACE Tulsa District facility projects. The scope of work specifically includes the production of 480VAC switchgear equipped with relays and metering, as well as high-resistance grounding cabinets designed for diesel generators. All equipment must be manufactured in strict compliance with ANSI C12.1 and C39.1 standards. Managed under the Department of Defense for the W076 Endist Tulsa agency, the contract falls under NAICS code 238210. Interested parties must adhere to the response deadline of December 3, 2026. The primary objective is the successful delivery of specialized electrical infrastructure to support critical facility operations within the Tulsa District.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Dry-Type Transformer ManufacturingThis small business set-aside subcontract involves the manufacturing and delivery of two 13,800/480VAC station service transformers for prime contractors working on USACE Tulsa District facility projects. The equipment must be produced in compliance with IEEE C57.12.01 Table 13 and must feature cast bronze or stainless nameplates along with temperature monitors equipped with programmable Form C contacts. The project is managed under the Department of Defense through the W076 Endist Tulsa agency. Interested parties should note that the response deadline for this opportunity is December 3, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 1 month

Medium-Voltage Switchgear ManufacturingThis subcontract opportunity is for the manufacturing and delivery of 15kV medium-voltage switchgear lineups intended for prime contractors working on USACE Tulsa District facility projects. The scope of work includes the production of the switchgear along with all necessary bus modifications and associated control cables. All deliverables must strictly adhere to IEEE and ANSI standards to ensure technical compliance and safety. Managed under the Department of Defense for the W076 Endist Tulsa agency, this procurement is designated as a total Small Business Set Aside under NAICS code 335313. Interested parties must submit their responses by the deadline of December 3, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

in about 1 month

Concrete Demolition and Foundation RepairThis subcontract opportunity is for concrete demolition and foundation repair services supporting prime contractors on USACE Tulsa District facility projects. The scope of work includes the demolition of existing pads, the repair of concrete surfaces, and the construction of minor equipment foundations. All deliverables must be level, properly cured, and strictly adhere to the seismic withstand requirements specified in Section 03 60 00.01. Managed by the Department of Defense under the W076 Endist Tulsa agency, this project is designated as a total Small Business Set Aside under NAICS code 238110. Interested parties must submit their responses by the deadline of December 3, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 1 month

Asbestos and Hazardous Material AbatementThis small business set-aside subcontract, titled Asbestos and Hazardous Material Abatement, involves the removal and legal disposal of hazardous materials for prime contractors working on USACE Tulsa District facility projects. The scope of work specifically focuses on the removal of asbestos cable trays and potheads within the switchyard, requiring the contractor to hold a certified asbestos abatement license. The selected contractor must ensure strict adherence to EPA, DOT, and OSHA labeling standards for all hazardous waste. Final deliverables include the provision of certified disposal manifests and the delivery of a clean project site. This opportunity is managed under the Department of Defense for the W076 Endist Tulsa agency.

Remediation Services

POSTED

DEADLINE

in about 1 month

Generator Commissioning and Efficiency TestingThis subcontract for the Department of Defense, specifically the USACE Tulsa District, involves providing specialized electrical testing and system commissioning for hydroelectric projects in Eufaula. The scope of work includes executing commissioning for new MCM systems, performing generator efficiency testing, and conducting model validation tests across three units. To ensure accuracy, the contractor must utilize power quality analyzers and validation software to deliver comprehensive commissioning and validation documentation. A critical requirement for this engagement is that all final reports must be signed off by a Professional Engineer (PE) to ensure technical compliance and certification. The project falls under NAICS code 541330 and is designed to support prime contractors in the final validation and efficiency testing phases of these critical energy infrastructure assets.

Engineering Services

POSTED

DEADLINE

Hydroelectric Generator Field Mechanical & Electrical ServicesThis subcontract for Hydroelectric Generator Field Mechanical and Electrical Services involves providing specialized technical support for prime contractors on USACE Tulsa District hydroelectric projects located in Eufaula. The scope of work focuses on the comprehensive disassembly, inspection, and reassembly of generating units, utilizing heavy rigging and precision alignment tools to ensure operational integrity. Key technical requirements include performing pre-disassembly electrical testing, alignment checks, and the disassembly of rotors, air housings, and exciters. Additionally, the contractor is responsible for cleaning stator cores and inspecting turbine and generator guide bearings to deliver fully reassembled and aligned units. The opportunity is categorized under NAICS code 238210 and is associated with the Department of Defense.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Stator Core Lamination FabricationThis subcontract involves the design, manufacture, and testing of stator core laminations and core clamping systems for Unit 1 of USACE Tulsa District hydroelectric projects. The scope of work includes precision engineering and fabrication of specialized steel laminations and clamping hardware, followed by rigorous structural and electrical integrity testing to ensure compliance with USACE specifications. The project requires the delivery of one complete stator core lamination and clamping system. Managed under the Department of Defense through the W076 Endist Tulsa agency, the performance of the contract is centered in Eufaula. The solicitation is categorized under NAICS code 332312, with a response deadline set for November 13, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Stator Coil Fabrication and TestingThis subcontract involves the design, manufacture, and testing of stator coils and accessories for prime contractors working on USACE Tulsa District hydroelectric projects. The scope of work includes prototype design, voltage endurance testing, and thermal cycle testing to ensure operational integrity. Specifically, the contractor is responsible for producing three complete sets of stator coils for 13,800 V generators with a capacity of 31,579 kVA, utilizing large-scale winding machinery and high-voltage insulation. The project is managed under the Department of Defense through the W076 Endist Tulsa agency, with performance taking place in Eufaula. All shop-tested coils and accessories must be delivered F.O.B. destination. The procurement falls under NAICS code 335311, with a response deadline set for November 13, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Micro Surfacing Application

690567 Western Federal Lands Division

POSTED

DEADLINE

Asphalt Concrete Pavement Placement

690567 Western Federal Lands Division

POSTED

DEADLINE

Pre-Engineered Metal Building (PEMB) Supply and Installation

FA8227 Afsc Ol H Pzim

POSTED

CLOSED

Structural Steel Erection

248-NETWORK Contract Office 8 (36C248)

POSTED

CLOSED

95--Supply/deliver Rainbow Bridge repair materials.

Solicitation # 140P8326Q0003

Pwr Olym MABO(83000)

POSTED

DEADLINE

Bridge Railing Installation

690567 Western Federal Lands Division

POSTED

DEADLINE

Open Grid Steel Deck Installation

690567 Western Federal Lands Division

POSTED

DEADLINE

RFI for MAGIS-100 Access Platforms

Solicitation # AD_MAGIS-100_DA

Fermilab - DOE Contractor

POSTED

CLOSED

Structural Reinforcement and Framing

Battelle Energy Alliance–doe Cntr

POSTED

CLOSED

about 2 months ago

FA2823 Aftc Pzio

POSTED

DEADLINE

Structural Steel Erection

Csa Southwest 7 Usda-Fs

POSTED

CLOSED

Drainage System Installation

690567 Western Federal Lands Division

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS