CLAMP, CABLE, ELECTRICAL CONNECTOR

The contract pertains to the procurement of 17 units of a clamp cable electrical connector with NSN 5935-01-350-9521, supplied under solicitation SPE7M5-26-T-315S. The item is designated as a critical application component, with two approved part numbers: GLENAIR INC P/N 450HA005NF09 and NORTHROP GRUMMAN SYSTEMS CORPORATION P/N GA801MW09D3C. Delivery is required within 168 days of contract award, with the original deadline set for November 5, 2026, and a needed ship date of January 5, 2027. Each unit is priced at $17.00, with no tolerance for quantity variance. All items must be delivered FOB origin and inspected and accepted at the destination, with packaging strictly governed by DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. If non-hazardous, commercial packaging compliant with ASTM D3951 is acceptable; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025. All packaging must be labeled and marked per MIL-STD-129, palletized per RP001, and include the specified Unit of Issue and Quantity per Unit Pack. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at level VII with an AQL of 0.1. The delivery address is DLA Distribution Jacksonville, with transportation handled per DLAD Proc Notes C19 and C20. The point of contact is Margaret Smith, and the contract is issued under the Department of Defense’s Active Devices Division.