Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

CLAMP, ELECTRICAL

Awarded
SPE7M126PZ076Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded Contract SPE7M126PZ076 on July 13, 2026, to CAGE code 19207 for the procurement of a single electrical clamp item identified by NSN 5999010095459, with a total contract value of $150,925.00. The award was processed as a unilateral modification under simplified acquisition procedures, referencing FAR 13.302(a) or 12.303(a), and administered through the DIBBS portal. The contract does not include detailed line-item pricing, quantities, delivery schedules, or FOB terms, and no specific packaging, inspection, or technical specifications are documented. The only explicitly incorporated clause is FAR 52.222-90, addressing discrimination based on diversity, equity, and inclusion, which was added via deviation 2026-00040, Revision 1, and applies to the contractor’s compliance obligations. The contractor is required to submit a Post-Award Request through DIBBS, and all communications must reference the amendment number P00001. The contracting officer is Jeremiah Young, reachable through the DLA Land and Maritime office, with payment issued by DLA Land and Maritime in Columbus, Ohio, and potential delivery originating from the U.S. Army Tank Automotive Command in Warren, Michigan. No contract type is specified, socioeconomic status or small business designation is stated, and no Contracting Officer’s Representative or quality inspection standards are identified. The entire award is structured as a minimal administrative modification with no options, performance metrics, or cost breakdowns documented beyond the total dollar amount.

General Info

DLA awarded $150,925 unilateral contract for electrical clamp NSN 5999010095459 to CAGE 19207 via DIBBS under simplified procedures.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335991 - Carbon and Graphite Product ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(1)

SPE7M126PZ076_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
DLA award SPE7M126PZ076 posted on DIBBS. Awardee: CAGE 19207 Total Contract Price: $150,925.00 Award Date: 07-13-2026 Line items: - CLAMP, ELECTRICAL (NSN/Part 5999010095459, PR 7015123202)

Similar Contracts

NAICS: 335991
New
DIBBS
BRUSH, ELECTRICAL COThe contract pertains to the procurement of 21 electrical brush units with part number 806780-0-01 and NSN 5977-01-487-4875, to be delivered FOB origin with no variance in quantity. Delivery is required within 169 days, with an original due date of September 23, 2026, and a need ship date of January 3, 2027. The item is designated as a critical application and must comply with stringent quality and packaging standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special marking required. All packaging must adhere to DLA’s packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking processes, with limited exceptions for functional uses in fluorescent lamps or instruments, which must include a secondary containment boundary as specified by NAVSEA 5100-003D. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and inspection and acceptance occur at origin. Documentation must include a Certificate of Conformance unless withheld by a Quality Assurance Letter of Instruction, and all technical and quality requirements are incorporated by reference from the DLA Master List. The item is to be delivered to the specified warehouse in Tracy, CA, and transportation is subject to DLAD procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 335991
DIBBS
ADAPTER, POWER SUPPLThe contract is for the procurement of 26 power supply adapters under solicitation SPE7L7-26-T-4145, issued by the Department of Defense through DLA Land and Maritime with delivery to the DDSP New Cumberland Facility in Pennsylvania. The item is identified by NSN 6130017072857 and part number 17019A0009-01, with a delivery timeline of 127 days as directed, and a required delivery date of May 2, 2026. The contract requires full and open competition with no set-asides, and pricing is to be submitted by offerors as the unit price and total price are not pre-determined. Deliveries are FOB origin, with inspection and acceptance occurring at the destination, and packaging must conform to ASTM D3951 while adhering to the higher precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, including barcoding and unit of issue specifications, and palletization must meet DLA Packaging Requirements RP001. Sampling for quality control follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The contract incorporates stringent safety and compliance mandates including the prohibition of intentional mercury addition in products except for specific exempted applications such as batteries, fluorescent lamps, sensors, and weapon systems, with mercury-containing portable devices required to have shock-proof construction and a secondary containment per NAVSEA 5100-003D. Hazard communication standards under 29 CFR 1910.1200 are enforced, and all hazardous materials must be labeled accordingly with submission of exemption tables for regulated substances. Cybersecurity requirements include compliance with NIST SP 800-171 and safeguarding of covered defense information under FAR 52.204-7012, with mandatory cyber incident reporting. The contractor must use WAWF for electronic invoicing, comply with employment eligibility verification and anti-trafficking provisions, and adhere to restrictions on covered defense telecommunications equipment and services. Small business representation and socioeconomic certifications are required, and offerors must disclose UEI and CAGE codes if providing covered telecommunications equipment. The
Defense Logistics Agency

POSTED

9 days ago

DEADLINE

in 2 days
View Details