Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLAMP, LOOP

Active
SPE7L1-26-T-943FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of four CLAMP, LOOP units with NSN 5340-01-091-6833 under solicitation SPE7L1-26-T-943F, with a delivery requirement of five days after award. The technical data associated with this item is subject to stringent export controls under either ITAR or EAR, meaning any disclosure—whether to foreign persons within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332510. Performance is directed to Chambersburg, Pennsylvania, and all inquiries must be directed to Michael Nordahl at the provided DLA contact information.

General Info

Procure four CLAMP, LOOP units with strict ITAR/EAR controls, restricted to certified DLA contractors, delivery in five days.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

1 OVERCASH AVENUE BLDG 9950, CHAMBERSBURG, PA, 17201-4150, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-943F for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,LOOP
CLAMP,LOOP
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-091-6833 Quantity: 4 EA Purchase Request: 7017784153QTY: 4 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7L1-26-T-943Q
The contract is for two resilient general mounts identified by NSN 5340-01-501-4392, with a delivery requirement of 20 days after award. It is issued under solicitation number SPE7L1-26-T-943Q, posted on August 9, 2026, with responses due by August 20, 2026. Full and open competition applies, and the NAICS code is 332510 under the Department of Defense’s Land Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. Export control regulations apply to technical data, making it subject to ITAR or EAR, with access restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training, and received explicit authorization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-946C
The contract pertains to the procurement of five turnbuckle bodies with NSN/Part Number 5340-01-517-0385 under solicitation SPE7L1-26-T-946C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 165 days of award, and the item is subject to stringent cybersecurity compliance requirements including CMMC Level 2 certification for the assessing organization. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is limited strictly to DLA contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from DLA to access the information. The contract is open for response until August 20, 2026, with performance to be delivered to New Cumberland, Pennsylvania, 17070-5002, and all inquiries should be directed to Isabelle Szulewski at the designated DLA point of contact.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-944G
The contract is for the procurement of 250 mounting plates with NSN 5340-01-623-8342 under solicitation SPE7L1-26-T-944G, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery requirement is set for 165 days after award, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. The NAICS code is 332510, and the place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Michael Nordahl via email and phone provided. This procurement is open to federal suppliers under an unrestricted competition category.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1257
The contract pertains to the procurement of a single unit of an infrared viewer with part number CC-3917EK and NSN 8145-01-606-1140, awarded under solicitation SPE8ED-26-T-1257. Delivery is required within twenty days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at Camp Lejeune, North Carolina, and the item must be packaged per ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence. Packaging and labeling must conform to MIL-STD-129, and palletization follows DLA’s RP001 procurement packaging standards. The item must be shipped via traceable means, explicitly prohibiting parcel post, with delivery directed to the Distribution Management Office at Building 1012, O Street Bay #8. The contractor must comply with all applicable technical and quality specifications referenced by R and I numbers from the DLA Master List, and documentation requirements for source approval and covered defense information are applicable. The contract stipulates that government identification must be removed from non-accepted supplies and data provided is proprietary or insufficient for competitive procurement, restricting full disclosure. The required delivery date is August 5, 2026, with a primary point of contact listed as Ogden Howard at DLA, and all logistics are tied to project TP 3 under the military freight designation M21625.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-946R
The contract pertains to the procurement of a COLLAR, SHAFT with NSN 5340017206077, issued under solicitation SPE7L1-26-T-946R by the Department of Defense’s Land Supply Chain. A total of 18 units are required at a unit price of $18.00, with the delivery window set at 165 days and delivery terms designated as FOB origin. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. The product is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstance, overriding any conflicting specification provisions unless authorized substitutes receive prior approval. Packaging must adhere to DLA’s packaging requirements and palletization guidelines, with the consignment destined for the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and quantity variance is strictly zero percent. The item is sourced exclusively from Vega Americas Inc under part numbers 2.44484 and KMB0556-180, and procurement must align with the designated DoD unit of issue. The original required delivery date is April 27, 2027, with a need ship date of February 2, 2027, and the contract was issued with a solicitation response deadline of August 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9350
The contract is for the procurement of 29 units of webbing strap identified by NSN 5340-00-868-9610 under solicitation SPE7LX-26-U-9350, with a response deadline of August 24, 2026, and a delivery requirement of 115 days after award. The item falls under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. This procurement is subject to full and open competition, and the technical data associated with the item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without authorization. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaire, and received formal approval from DLA. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14LH
The contract pertains to the procurement of 395 straight headless pins identified by NSN 5315-01-269-9299 under solicitation SPE4A6-26-T-14LH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 155 days after award, and responses must be submitted by August 17, 2026. The item falls under NAICS code 332510 and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Cybersecurity compliance is mandated through CMMC Level 2 certification for third-party assessors, and packaging must adhere to DLA standards. Inspection and acceptance occur at the origin, and non-accepted supplies must have all government identification removed. Physical marking of the bare items is required, and export control regulations under ITAR or EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract enforces tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with additional provisions for the safeguarding of covered defense information. Technical data governing the item cannot be disclosed to foreign persons, including employees of U.S. companies or subsidiaries, without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to controlled data is limited to contractors who have successfully completed the DLA Export-Controlled Technical Data Questionnaire and training via the designated DLA website. The place of performance is Tinker Air Force Base, Oklahoma, with Summer Allen as the primary point of contact for inquiries. The procurement is classified as federal and does not specify a set-aside type, and all documentation must be submitted via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-943E
The contract pertains to a non-NSN item with part number 5GQU3FMRB1003N1820A3E10B3SSP1P8 sourced from COTTERMAN CO USA located in Croswell, Michigan, with a total quantity of two units to be delivered in 20 days. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA’s RP001 packaging requirements, and packaging unit quantity specified as one per unit pack. The destination for delivery and marking is Camp Carroll, Waegwan, Korea, under the W50YED code, with transportation governed by DLAD Proc Notes C19 and C20. The contract reference is SPE7L1-26-T-943E, with an original required delivery date of August 7, 2026, and a purchase request number of 7017798068. The unit price is not provided but the total cost is implied as two units at the listed price line, with government use indicators and procurement details including the DLA point of contact and contract type classified as a solicitation.
All Other Miscellaneous Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L1-26-T-944L
This contract specifies the procurement of one unit of a box and accessories identified by NSN 2540015981937 under solicitation SPE7L1-26-T-944L, with a required delivery within five days of award and a firm delivery date of August 4, 2026. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements, with hazardous materials packaged according to TQ requirement IP025 if classified per FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. The item is to be delivered FOB origin with no quantity variance permitted, inspected and accepted at destination, and must be shipped via the fastest traceable means, excluding parcel post. Shipping instructions direct delivery to the DLA Distribution Management Office in Yermo, California, with an alternate parcel post address in Barstow, California. The unit of issue is each, priced at $1.00, with total value of $1.00, and the contract includes strict government-use identifiers and tracking data for logistics coordination.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
DISK ASSEMBLY
Solicitation # SPE7L1-26-T-945B
The item under contract is a disk assembly manufactured through a forging process, with stringent technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. Critical welding per Drawing 10861595 must meet specifications outlined in Drawing 12479550, including mandatory preproduction submission of the contractor’s welding procedure specification. Inspection and acceptance must occur at the manufacturer’s facility, with technical verification required—count, kind, and condition inspections are prohibited. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. The product is classified as a critical application item and must not contain Class I ozone-depleting chemicals; any substitutes require prior approval. Configuration changes require formal engineering change proposals or variance requests. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129, with specific materials and methods detailed, and palletization aligned with DLA requirements. Final delivery is FOB origin, with no tolerance for quantity variance, and the item must be delivered by January 11, 2027, to the DLA distribution facility in New Cumberland, Pennsylvania. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 336350, with unit price of $58.00 for a total of 58 units, and the contract data references the full technical documentation controlled by multiple drawing revisions dating back to 1965 and updated through 2022.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
The contract pertains to the procurement of a power supply with part number TH-4322, supplied by Arnold Magnetics Corporation under solicitation SPE7L1-26-U-0557, with a total quantity of 10 units at a unit price of $10.00, delivered FOB origin within 127 days. The item is covered under a Total Small Business Set-Aside and is classified as a critical application item. It must comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, and all bare items must be marked with the contract number, NAWC CAGE code, and part number unless superseded by technical drawings. Technical and quality requirements are incorporated by reference from the DLA Master List, and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical analysis reagents specified by NAVSEA, and any portable items containing mercury must include shockproof construction and secondary containment per NAVSEA 5100-003D. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The NSN is 6130014614336, the unit of issue is EA, and the inspection and acceptance points are at destination with zero variance allowed on quantity.
Motor and Generator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-26-T-946Y
The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.
Iron and Steel Forging

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-944M
The contract pertains to the procurement of a propeller shaft with a universal joint, identified by NSN 3010-01-122-5657 and part number 13026540, supplied by GE Aviation Systems LLC and Whippany Actuation Systems LLC. Eight units are required to be delivered within 165 days from the order date, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must follow RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. The contract includes mandatory compliance with CMMC Level 2 cybersecurity self-assessment and applies to covered defense information as outlined in RD002. Pricing is fixed at $8.00 per unit for a total of $64.00, with zero variance allowed in quantity. The delivery destination is DLA Distribution Red River in Texarkana, TX, with the required ship date set for February 2, 2027. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, whose controlling revision depends on the acquisition type and solicitation amendment dates. The contract is issued under solicitation SPE7L1-26-T-944M, with a primary point of contact at DLA for inquiries.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 322219
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-944J
This contract under solicitation SPE7L1-26-T-944J specifies the procurement of 52 units of a COVER, ACCESS item with NSN 5340-01-322-3592, to be delivered FOB origin within 74 days of contract award with no variance allowed in quantity. All items must comply with strict technical, quality, and packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special markings required. The product is classified as a critical application item and must adhere to the technical drawing revision B dated 01/20/2023. Zero tolerance is enforced for non-conformances in sampling, requiring zero defects under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any part of the product, preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, all of which must incorporate secondary containment if used. Packaging must meet DLA’s requirements including palletization and shipping standards, with delivery directed to the specified warehouse in Tracy, CA. The contract enforces configuration change management and requires formal requests for any deviations or waivers. Quality assurance allows for a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. This is a total small business set-aside under NAICS 322219 with full and open competition, and all documentation references the DLA Master List of Technical and Quality Requirements. The delivery deadline is December 6, 2026, with an original ship date of November 3, 2026.
Other Paperboard Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-943J
The contract is for a single O-RING with NSN 5331-01-378-8578, required for delivery within 20 days ADO under solicitation SPE7L1-26-T-943J, issued on August 9, 2026, with proposals due by August 20, 2026. The item is to be delivered to Fort Bragg, North Carolina, and the solicitation is managed by the Department of Defense’s Land Supply Chain through Kristina Derry at DLA. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, where technical specifications referenced by R or I numbers are incorporated by full text from the DLA website. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved functional uses such as batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All non-accepted supplies must have government identification removed prior to return, and the NAICS code 339991 applies to this procurement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
Spring Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-945T
This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details