Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CLAMP, PIPE, ANCHOR A

Active
SPE7M3-26-T-7401Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 17 units of CLAMP, PIPE, ANCHOR A with NSN 4730-01-565-2664 under solicitation SPE7M3-26-T-7401. Delivery is required within 315 days from the award date, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at DLA Distribution Warner Robins in Robins AFB, Georgia. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 packaging guidelines, with no use of Class I ozone-depleting chemicals permitted under any circumstances. Substitutes must be pre-approved unless explicitly authorized by the specification. The unit of issue is each, with a total contract value of $289.00 at $17.00 per unit. The item must be palletized as specified, with parcel post and shipping addresses clearly identified, and the required ship date is June 1, 2027, with the original delivery deadline set for June 7, 2027. The contract falls under NAICS code 332919 and is managed by the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.

General Info

Procurement of 17 pipe clamp units via DIBBS under SPE7M3-26-T-7401, due July 20, 2026, for federal use.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-7401.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,PIPE,ANCHOR A
CLAMP,PIPE,ANCHOR A
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
V I J CORP 94581 P/N 3063ER
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439809 0001 EA 17.000
NSN/MATERIAL:4730015652664
DELIVERY (IN DAYS):0315
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7M3-26-T-7401
SECTION B
PR: 7017439809 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:06/01/2027 Original Required Delivery Date:06/07/2027
SPE7M3-26-T-7401 NSN/Part Number: 4730-01-565-2664 Quantity: 17 EA Purchase Request: 7017439809QTY: 17 Delivery: 315 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
Supply of TEE, BOSS (NSN 4730-01-708-1342) Metal FittingThe contract entails the manufacture, packaging, and delivery of three military-specification fabricated metal fittings designated as TEE, BOSS with National Stock Number 4730-01-708-1342, produced to meet stringent defense standards including MIL-STD-129, ASTM D3951, and DLA packaging requirements. These components are critical for military logistics and must be fabricated with precision to ensure compatibility and durability under operational conditions. The work is being executed under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with all items required to comply fully with federal packaging and labeling mandates to enable seamless integration into the military supply chain. The contract was posted on July 20, 2026, and falls under NAICS code 332919, which classifies it within the Other Fabricated Metal Product Manufacturing sector. While specific performance locations and point of contact details are not provided, the delivery and packaging must adhere strictly to DLA regulations to satisfy audit and inventory control protocols. The subcontract is managed through the DIBBS system with a reference ID of SPE7M426P4122, indicating its formal placement within the Department of Defense procurement framework. Compliance with all technical and procedural specifications is mandatory, as deviations could result in rejection of the units and disruption of critical supply operations.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332919
New
DIBBS
Metal Hose Assembly Supply and DeliveryThe contract entails the supply, packaging, labeling, and delivery of two metal hose assemblies identified by NSN 4720-01-115-9803, fully compliant with military specifications and Defense Logistics Agency requirements. The work falls under the NAICS code 332919 and is structured as a subcontract within the Department of Defense procurement framework, with the Defense Logistics Agency serving as the overseeing agency. All deliverables must adhere strictly to technical and logistical standards mandated by DLA, including proper documentation, packaging protocols, and labeling for military use. The contract was posted on July 20, 2026, and is associated with the award number SPE7M126P8914, indicating it is a finalized procurement action. The place of performance and specific office location are not provided, suggesting the work may be performed at any qualified vendor facility, with delivery directed to designated military locations. While the point of contact and set-aside details are not specified, the contract emphasizes full compliance with federal defense logistics protocols, ensuring timely and accurate fulfillment of mission-critical components.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332919
New
DIBBS
VALVE, FLOATThe contract specifies the procurement of a single float valve with NSN 4820016078750 and part number 207957-01D from Griswold Industries, to be delivered in one unit under FOB Destination terms with a 20-day delivery window from the as-directed order. All packaging and labeling must strictly comply with ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence over any conflicting standards; palletization must adhere to RP001 requirements, and each unit pack must be marked with the correct Unit of Issue and Quantity per Unit Pack as defined in the contract. The delivery destination is the USS ZUMWALT DDG 1000 at FPO AP 96693, and shipments must use traceable transportation methods with no parcel post allowed; all hazardous materials, including mercury or mercury-containing compounds, are prohibited except in specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and portable mercury-containing devices must have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination under FAR 52.246-2, and the contractor must comply with multiple security, cybersecurity, and supply chain integrity clauses, including 252.204-7012 for safeguarding defense information, 252.204-7018 prohibiting acquisition of covered telecommunication equipment, and 252.223-7006 and 252.223-7008 prohibiting toxic chemicals and hexavalent chromium. The contractor must provide a Unique Entity Identifier and CAGE code, represent size and socioeconomic status, and comply with trafficking in persons, equal opportunity, employment eligibility verification, and sustainable product requirements. Electronic invoicing via WAWF is mandatory, and all submissions must conform to DLA’s technical and quality requirements from their master list, with the solicitation issued under SPE7MC-26-T-131W and managed by the Defense Logistics Agency’s Federal procurement system.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
THREAD PIECE, UNIONThis contract is for the procurement of 35 units of a thread piece, union with NSN 4730-01-473-4659, under solicitation SPE7M2-26-T-5580, issued by the Department of Defense’s Nuclear Reactor Program. The item must be delivered FOB origin within 168 days, with zero variance permitted in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and unit packaging codes, while marking follows MIL-STD-129 without special identifiers. The item is designated as a critical application, with approved suppliers listed, and mercury or mercury-containing compounds are strictly prohibited unless exempted for functional uses in batteries, lamps, instruments, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable mercury devices. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. The contract enforces DLA packaging requirements and transportation protocols per DLAD notes C19 and C20, with the original delivery deadline set for March 6, 2027, and a need ship date of January 5, 2027. Unit of issue is each (EA) at a price of $35.00, totaling a contract value of $1,225.00.
NUCLEAR REACTOR PROGRAM

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
NOZZLE, FIRE EQUIPMEThe contract specifies the procurement of a fire hose nozzle identified by part number M24408-T1-2 and NSN 4210006010986, with a required quantity of 500 units to be delivered within 244 days. Manufacturing must follow a metal casting process requiring specialized tooling, and all items must comply with MIL-N-24408E specifications, including first article testing involving four samples witnessed by a Government Quality Assurance Representative. The first article test report must be submitted within 90 days of contract award, and approved test samples may be delivered as part of the final shipment. Quality conformance inspections are mandatory and must adhere to MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, and II respectively. All items must be marked per MIL-STD-130N and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements, with shipping and delivery addressed to the DDSP New Cumberland Facility in Pennsylvania under FOB origin terms. The item is designated as a critical application, subject to cybersecurity maturity model certification level 2 self-assessment, and must not contain intentionally added mercury except in limited, approved exceptions such as functional components in batteries or instruments, with portable mercury-containing devices requiring dual containment per NAVSEA standards. The contract is a service-disabled veteran-owned small business set-aside under NAICS code 332919, with a separate line item for the first article test requiring one unit priced at $1.00, though no separate charge is assumed unless otherwise cited.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
HEAT GUN, ELECTRICThe contract is for the procurement of 58 electric heat guns under the NSN 4940-00-438-1606, with a delivery requirement of 168 days after award. The solicitation, identified as SPE7M4-26-T-242X, was posted on July 20, 2026, and responses are due by July 23, 2026. Full and open competition is authorized, and the product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date. The specification prohibits the use of Class I ozone-depleting chemicals in any component or packaging, overriding any conflicting specification language while maintaining all product performance standards. Substitute chemicals require prior approval unless explicitly authorized. Acceptable part numbers include EP-7 from CAGE 59164 and HG-751B from CAGE 83284. The contractor must also provide one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repairs with each unit. The place of performance is New Cumberland, Pennsylvania, with the contract managed by the Department of Defense’s Fluid Handling Division, and primary point of contact is Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
MANIFOLD, HYDRAULICThe contract is for the procurement of a hydraulic manifold, part number 22948-900 with NSN 4730015692161, under solicitation SPE7M3-26-T-7390, issued as a total small business set-aside by the Department of Defense’s Fluid Handling Division. A total of 14 units are required, each priced at $14.00, with delivery due in 227 days from the award date, FOB origin, and inspection and acceptance to occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements, and the unit of issue is each. The item must be delivered to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a required ship date of March 5, 2027, and original delivery date of March 21, 2027. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and the contract incorporates federal technical and quality specifications referenced in the DLA Master List. The point of contact is William Cain, and the solicitation response deadline was July 20, 2026, with posting on July 9, 2026.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, TUBE TO BOSSThe contract specifies the procurement of a steel elbow fitting with a 3/8 inch nominal tube outside diameter, designated as a commercial item and identified by NSN 4730-01-054-6023, with a total quantity of 374 units. The item must conform to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing SAE AS1040G Revision G and SAE AS4841 Revision D, and is subject to Class 3 threads and critical application standards. Manufacturing and assembly must be performed exclusively by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible via eAuditNet. The product is prohibited from containing mercury or mercury-containing compounds except under narrowly defined exceptions for functional components like batteries, sensors, or instruments, and portable mercury-containing devices must include a secondary containment and be shockproof in compliance with NAVSEA 5100-003D. Ozone-depleting chemicals are strictly banned, and any substitute materials require prior approval. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging protocols. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the shipment must be delivered within 173 days to the DLA Distribution Depot Hill in Hill AFB, Utah. The contract includes a zero variance tolerance on quantity, and the required delivery date is August 3, 2027, with a need ship date of January 10, 2027.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSEThe contract pertains to the procurement of one elbow hose component identified by NSN 4730-01-617-7242 and part number FS6802-06-10-NWO-FG, supplied by Brennan Industries. Delivery is required within ten days to the military facility in Beaufort, South Carolina, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination point, and all packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. The item must be shipped via traceable freight methods, not parcel post, to the designated distribution management office, with the shipment tied to a specific RDD, project code, and military freight control number. Technical and quality standards referenced in the DLA Master List govern the item’s specifications, and compliance with the revision in effect on the solicitation issue date is mandatory. The solicitation, issued under contract number SPE7M3-26-T-7560, has a response deadline of July 31, 2026, with an original required delivery date of November 28, 2025, and is managed by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
Federal
VALVE,REGULATING,FLThis contract pertains to the repair and refurbishment of a regulating valve critical to a shipboard system, designated as SPECIAL EMPHASIS material due to its direct impact on safety, reliability, and operational integrity of naval vessels. The work requires strict adherence to referenced military and commercial specifications including ASTM-A581, ASTM-A582, SAE AMS 5643, MIL-STD-2035, MIL-STD-792, and multiple NAVSEA and S9074 series standards for welding, brazing, material certification, and nondestructive testing. All components must be refurbished to comply with specific drawings including V3D10233 and WI-S1E10035, with traceability maintained from raw material through final assembly using approved markings, heat lot codes, and validated certifications. The contract mandates that all materials be traceable to chemical and mechanical test reports, and any processed or repaired components must undergo re-certification if their properties are altered. The contractor must submit comprehensive documentation including Welding Procedure Specifications, Procedure Qualification Records, Consumed Weld Metal Certificates, and Final Certificates of Compliance through the Wide Area WorkFlow system, with final acceptance required prior to shipment. The contractor must operate under a quality system certified to ISO-9001 with supporting calibration controls per ISO-10012 or ANSI-Z540.3, and is subject to Government Quality Assurance at source by DCMA personnel. All subcontractors must be vetted for capability, and their work must conform to the same rigorous standards. For repair work, the vendor has 180 days from receipt of the carcass to perform a teardown and evaluation and submit a Firm-Fixed Price quote that includes all labor, materials, and handling costs. A mandatory Repair Turn Around Time of 365 days applies, with price reductions imposed for failure to meet deadlines and potential termination for default. No mercury may be present in components, and marking of materials is strictly controlled to avoid improper identification. All waivers and deviations—classified as Critical, Major, or Minor—require prior written approval by the Contracting Officer and must be submitted via ECDS. Certifications must be complete, unqualified, and directly linked to physical markings on each part; missing, incomplete, or ambiguous documentation results in rejection. The contract operates under Emergency Acquisition Flexibilities, is rated under DPAS, and requires bilateral acceptance before execution. All documentation must be submitted electronically via WAWF with designated
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 332919
New
Federal
VALVE, GLOBEThis contract pertains to the procurement of a 1/2 inch socket weld in-line stop valve with backseat, manufactured in strict accordance with NAVSHIPS drawing 803-2177525, assembly C3A1AF, for use in critical shipboard systems where failure could result in catastrophic consequences including loss of life or the vessel itself. The item is designated as SPECIAL EMPHASIS MATERIAL (Level I), requiring exhaustive control procedures from raw material sourcing through final inspection. All materials must conform to precise specifications including ASTM-A105, ASTM-A182, MIL-S-24093, ASTM-A193, ASTM-A194, and others, with mandatory chemical and mechanical analysis traceable to heat lot numbers marked directly on components. Hardness, pressure testing, non-destructive inspections, and hydrogen embrittlement relief treatments are required and certified, with acceptance criteria tied directly to drawing notes and referenced standards. First Article Testing is mandatory, and all welding, brazing, and hardfacing must be performed by qualified personnel using approved procedures documented under S9074-AQ-GIB-010/248 and 0900-LP-001-7000, with full submission of weld procedure qualifications and consumed weld metal certifications before production begins. The contractor must maintain and operate a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or as an alternative, MIL-I-45208 with MIL-STD-45662 calibration standards, subject to government quality assurance inspection at source. Traceability is absolute—every material lot, component, and test result must be permanently and legibly marked, with documentation linking inspection data to individual items through unique traceability codes maintained across all subcontracted operations. Certifications, especially for chemical composition, mechanical properties, and non-destructive testing, must be 100% verified, signed electronically with controlled and auditable methods, and free of disclaimers. Final acceptance is zero-defect: one nonconformity triggers lot rejection. All fasteners must be marked per MIL-DTL-1222 with manufacturer ID, material symbol, and traceability number, and coatings must be applied after proper heat treatment and baking cycles. The contract mandates strict configuration control, requiring Engineering Change Proposals for any modifications and prohibits unapproved deviations. Deliver
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 332919
New
Federal
UNION,PIPEThis contract, issued under solicitation N0010426QFF66 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, requires the furnishing of a 1-inch NPS Union Assembly designated as SPECIAL EMPHASIS Level I material due to its critical use in shipboard systems, where failure could result in catastrophic loss of life or vessel. The item must conform precisely to Naval Ship Systems Command Drawing 803-1385946, with specific prohibitions against welding on UNS C92200 and UNS C90300 materials, and mandatory pressure ratings corrected to 1500 WOG for 1/8 to 2-inch NPS and 800 WOG for 2-1/2 inch NPS. All components must be traceable from raw material through final assembly to certified test reports, with permanent markings applied per MIL-STD-792. Chemical and mechanical analysis is required for critical parts, and material certifications must include full, unqualified declarations of compliance with no disclaimers. Each union assembly must pass hydrostatic and underwater or soapsuds tests in accordance with specified notes in the drawing, with strict pressure and time tolerances applied. Certification of compliance must be submitted via WAWF prior to delivery, with all data referencing contract N00104 and directed to Portsmouth Naval Shipyard’s updated DODAAC N50286, and no material may be shipped without prior written acceptance. The contract mandates a quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO/IEC-17025, or alternately MIL-I-45208 and MIL-STD-45662, subject to government audit at any time during production. All subcontractors must be evaluated and their work controlled to ensure conformance, with traceability preserved throughout every processing step, including subcontracted operations. The contract explicitly prohibits mercury contamination and unauthorized marking of materials, except for fasteners, and requires all thread inspections to follow FED-STD-H28 System 21 or 22 as applicable, with exacting standards for O-ring groove inspection using the General Acceptance Criteria CSD008 where no explicit defect criteria exist. Final acceptance requires 100% inspection of traceability markings, certification documents, and test reports, with zero-defect lot
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

New
DIBBS
Unable to Decompose Subcontract OpportunitiesThe contract pertains to a subcontract opportunity under the Fluid Handling Division of the Department of Defense, with a posting date of July 20, 2026, and a response deadline of July 31, 2026. The place of performance is listed as Jacksonville with a zip code of 28545-6070, though the state and other address details are unavailable. The solicitation number is SPE7M426T271E, accessible via the provided DIBBS link, but no NAICS code, set-aside type, organization type, or point of contact information is provided. The system was unable to decompose any sub-opportunities, and key details such as the contract type specification, funding source, or award criteria remain unidentified due to incomplete metadata.

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Ocean Transportation of SuppliesThe contract entails the arrangement of ocean freight services using U.S.-flag vessels to transport supplies for the Department of Defense in full compliance with the Buy American Act and MARAD regulatory requirements. All transportation must be executed through vessels that are U.S.-owned, U.S.-crewed, and U.S.-built, ensuring adherence to federal mandates designed to support domestic maritime capabilities and national security interests. The procurement is specifically designated as a subcontract under NAICS code 483111, which classifies it as ocean transportation of freight, and it is directed by the Fluid Handling Division of the DoD. Performance is required to be completed in support of operations at Hill Air Force Base, Utah, with an address of 84056-5734 serving as the designated place of performance. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a tight timeline for interested parties to submit proposals. Participation is limited to entities capable of meeting stringent regulatory and operational standards, including documentation of vessel ownership, crew nationality, and compliance with all applicable defense logistics protocols. While no set-aside designation is specified, the nature of the work inherently favors contractors with established experience in military logistics and maritime shipping under federal oversight. Contractors must be prepared to provide evidence of compliance with U.S. maritime laws and demonstrate capacity to move defense-related cargo efficiently and securely through international waterways under the authority of the Department of Defense.
Deep Sea Freight Transportation

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Identification and LabelingThe contract pertains to the identification, classification, and labeling of hazardous materials linked to a component or its packaging, requiring full compliance with OSHA regulations and the preparation of Material Safety Data Sheets. The work demands accurate determination of chemical hazards, proper labeling in accordance with federal standards, and thorough documentation to ensure safe handling, storage, and transportation of hazardous substances. All activities must align with current regulatory frameworks to mitigate risks and maintain workplace safety. This is a subcontract under the NAICS code 541690, issued by the Fluid Handling Division of the Department of Defense, with performance required at Hill Air Force Base, Utah, zip code 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. Interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Military-Standard Marking and Bar-CodingThis contract requires the application of permanent labels and data matrix barcodes to packaging and units in strict accordance with MIL-STD-129 standards to ensure full compliance with Department of Defense logistics traceability requirements. The work involves precise labeling procedures that enable accurate identification, tracking, and inventory management of military supplies throughout the supply chain, from procurement to field deployment. All markings must meet DoD-specified durability, readability, and placement criteria to support automated scanning and data integration across defense logistics systems. The contract is designated as a subcontract under NAICS code 541380 and is issued by the Fluid Handling Division of the Department of Defense. Performance is required at Hill Air Force Base, Utah, with a zip code of 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. While the specific contracting office and point of contact are not provided, the requirement is critical for maintaining end-to-end visibility of military assets and must be executed with rigorous attention to technical specifications and compliance timelines.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires specialized packaging, preservation, and palletization of aerospace components in full compliance with military standards to ensure long-term storage and secure transport. This includes the mandatory use of desiccants, vapor corrosion inhibitors, and sealed containment methods to protect sensitive hardware from environmental damage, moisture, and corrosion during extended periods. Work must adhere to stringent military specifications governing material selection, application techniques, and documentation to maintain operational readiness upon deployment. Performance is centered at Hill Air Force Base with a zip code designation of 84056-5734, indicating a critical defense logistics location. The solicitation is classified as a subcontract under NAICS code 561910, reflecting its alignment with support activities for military operations. The contracting entity is the Fluid Handling Division within the Department of Defense, signaling a high-priority procurement tied to defense infrastructure and readiness. Interested parties must submit responses by the deadline of July 31, 2026, with the opportunity announced on July 20, 2026. While no set-aside details are provided, the nature of the work and its placement within a defense agency suggest a focus on qualified, certified subcontractors with proven expertise in military-grade packaging and preservation of aerospace assets.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Aerospace Component ManufacturingThe contract pertains to the precision manufacturing of a high-integrity aerospace actuator clamp and band assembly specifically designed for use on the main landing gear of military aircraft. It demands stringent adherence to military quality standards, with all components requiring exacting machining tolerances and full material traceability from raw stock through final assembly. The work must be performed to ensure structural reliability and operational safety under extreme conditions, consistent with the rigorous demands of defense aerospace applications. All production processes, inspections, and documentation must align with defense-grade quality control protocols to meet certification and audit requirements. Performance of this subcontract is set for Hill Air Force Base, Utah, with an official response deadline of July 31, 2026, and a posted date of July 20, 2026. The North American Industry Classification System code 332999 indicates the work falls under other fabricated metal product manufacturing, underscoring the specialized nature of the components involved. The contracting entity is the Fluid Handling Division under the Department of Defense, which requires vendors to demonstrate proven capability in high-reliability aerospace subsystems. No set-aside provisions are specified, meaning all eligible contractors may respond, but compliance with defense logistics standards and end-use specifications is mandatory for award consideration.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity for Covered Defense InformationThe contract requires implementation of NIST SP 800-171 security controls to safeguard covered defense information as mandated by DFARS 252.204-7012 and 252.240-7997, ensuring compliance with federal cybersecurity standards for sensitive defense data. This is a subcontract under the Department of Defense, specifically managed by the Fluid Handling Division, with performance expected at the facility located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation is categorized under NAICS code 541512, indicating it relates to computer systems design services, and the response deadline is July 31, 2026, with the posting date listed as July 20, 2026. All proposers must align their cybersecurity posture with the outlined NIST controls to meet the contractual obligations for protecting controlled unclassified information within the defense supply chain.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Export-Controlled Items HandlingThe contract requires management of documentation and compliance for export-controlled items under the International Traffic in Arms Regulations and the Export Administration Regulations, as mandated by DFARS 252.225-7048. This subcontract is centered on ensuring all procedures adhere to strict federal export control standards, particularly for items subject to ITAR or EAR restrictions, with full accountability for recordkeeping, reporting, and personnel training to maintain regulatory compliance. The work must be performed at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all activities must align with the requirements outlined under NAICS code 541611. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The contracting office is the Fluid Handling Division within the Department of Defense, and this opportunity is structured as a subcontract, indicating that the awarded entity will be supporting a prime contractor or larger program under the DOD's supply chain infrastructure. No set-aside classification is specified, and while the point of contact details are not provided, all proposals must demonstrate proven capability in handling sensitive defense-related export controls with precision and consistency. The official link for submission and reference is accessible through the DIBBS system.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and ComplianceThis contract requires strict adherence to hazardous materials regulations during all packaging operations, with particular emphasis on proper hazard labeling and the complete prohibition of hexavalent chromium in accordance with DFARS clauses. All activities must ensure compliance with federal standards for handling, storing, and transporting regulated substances to avoid violations and maintain safety integrity. The work is to be performed at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, under the oversight of the Fluid Handling Division within the Department of Defense. The contract is classified as a subcontract under NAICS code 541690 and was posted on July 20, 2026, with a firm deadline for responses on July 31, 2026. No set-aside designation is specified, and all interested parties must meet the regulatory requirements outlined in the solicitation, particularly regarding materials and labeling. Interested contractors must access the full solicitation details via the provided DIBBS link to ensure full understanding of compliance obligations and submission requirements.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Defense-Compliant Packaging and PalletizationThe contract requires full compliance with military-standard procedures for packaging, palletizing, and labeling hose assemblies using fiberboard boxes, approved preservation techniques, and markings that meet MIL-STD specifications. All work must ensure the integrity and readiness of hose assemblies during storage and transportation under defense logistics requirements, with strict adherence to dimensional, protective, and标识 protocols. The materials and methods used must be certified to withstand environmental stressors and maintain operational readiness throughout the supply chain. Performance is required at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 484220, indicating a focus on support activities for transportation. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is managed by the Fluid Handling Division within the Department of Defense. Participation requires the ability to meet exacting military packaging standards without deviation, ensuring seamless integration into defense logistics networks.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose Assembly ManufacturingThe contract entails the manufacture of 19 nonmetallic hose assemblies designated by NSN 4720013173556 and part number JCM-16464-001, specifically for use in strike weapons and unmanned systems. All units must fully comply with Defense Logistics Agency and Defense Federal Acquisition Regulation Supplement standards to ensure operational reliability and regulatory alignment within the Department of Defense supply chain. The work is structured as a subcontract under NAICS code 326220 and is managed by the Fluid Handling Division of the Department of Defense, with performance required at the specified location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with no set-aside classification indicated, leaving eligibility open to all qualified vendors. All deliveries must meet exacting technical specifications to support critical military platforms.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Prohibited Telecommunications Equipment ComplianceThis contract requires strict compliance with Section 889 of the National Defense Authorization Act, mandating that no covered telecommunications equipment or services from specified foreign sources be used within the supply chain. The subcontractor must provide comprehensive verification and attestation that all components, systems, and services delivered are free from prohibited equipment, ensuring alignment with U.S. federal security mandates. The requirement applies across the entire procurement and delivery process, with failure to comply potentially resulting in contract termination or legal consequences. The solicitation is issued by the Fluid Handling Division of the Department of Defense under NAICS code 541611, with performance centered in New Cumberland, Pennsylvania, at zip code 17070-5002. Responses are due by July 31, 2026, and the contract is classified as a subcontract, indicating it supports a larger federal procurement effort. The deadline and compliance criteria underscore the urgency and importance of supply chain integrity, requiring documented proof and ongoing adherence to security protocols throughout the contract period.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details