Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CLAMP, TUBING, REGULATIN

Active
SPE2DS-26-T-294FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for 8 packages of ratcheting plastic tubing clamps, each package containing 25 units, for a total of 200 clamps. Each clamp is 4.3 inches long, non-sterile, disposable, and designed to occlude tubing with an outer diameter between 1 and 8 mm, featuring smooth jaws and finger rings for easy handling. The item is identified by NSN 6515-01-614-0551 and must be supplied with the source and part number clearly specified by the bidder. Packaging requirements mandate that each unit be sealed in a protective container to prevent damage and that all shipments be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the delivery point at Fort Hood, Texas. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of the standard are available through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-294F, incorporates technical and quality requirements from the DLA Master List, and the revision in effect at the solicitation issue date controls compliance. The contract was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must be completed within 20 days of award. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Michael Small as the primary point of contact.

General Info

200 non-sterile plastic tubing clamps, 4.3 inches, 1–8 mm tubing, delivered to Fort Hood by August 30, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-294F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Michael Small
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,TUBING,REGULATING-SHUTOFF
CLAMP, TUBING, RATCHETING, PLASTIC, BLUE,
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
4.3 INCH LONG, DISPOSABLE, NON-STERILE, 25s: OCCLUDES TUBING FROM 1 TO 8 mm O.D.; INCLUDES SMOOTH JAWS AND FINGER RINGS. . UNIT OF ISSUE IS A PACKAGE(PG) OF 25. . BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED. .
SPE2DS-26-T-294F
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-614-0551 Quantity: 8 PG Purchase Request: 7017684204QTY: 8 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-244U
The contract is for the procurement of 30 gas detectors identified by NSN 6665-01-723-2328 and part number MBB3-00C105E-020 under solicitation SPE7M1-26-T-244U, issued by the Department of Defense through the Maritime Supply Chain. The unit of issue is each, with a total contract value of $30.00 per unit, delivered FOB origin within 25 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including special marking code ZZ indicating the item is a delicate instrument and open only for inspection or use. The item must be labeled per MIL-STD-129, palletized according to DLA standards, and shipped to the receiving warehouse in Tracy, California. Technical and quality requirements are governed by the DLA Master List, with revisions effective as of the solicitation issue date. This is a total small business set-aside under NAICS code 334511, with a response deadline of August 13, 2026, and an original required delivery date of November 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-245M
The contract specifies the procurement of 58 kits of a gas detector identified by NSN 6665016908588 and part number HU-X1W1H1M1Q1-Y-NV from Honeywell Analytics Inc., under solicitation SPE7M1-26-T-245M. Delivery is required within 158 days FOB destination, with zero tolerance for quantity variance. All items must comply with stringent packaging and preservation standards per MIL-STD-2073-1E Appendix D for kits, requiring each kit to include a parts list with part names, numbers, and quantities, and all loose hardware must be sealed in individual containers using the highest applicable preservation method to prevent corrosion or damage. Packaging must conform to MIL-STD-129 for marking, with serial numbers mandated on unit, intermediate, and shipping containers, and packing lists must reflect these serial numbers per specified paragraphs. The preservation method must protect the most critical item within each kit, and no bulk shipping of hardware is permitted. Mercury and mercury compounds are strictly prohibited in any preservation, packaging, or marking materials. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications follow predefined verification levels or AQLs. Sampling may use attribute or variable inspection methods at the manufacturer’s discretion unless contractually directed. The contract invokes DLA’s Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Special marking requirements are denoted as ZZ and must align with MIL-STD-129. The unit of issue is KT (kit), and items must be palletized per RP001 DLA packaging requirements. Compliance with IP025 for hazardous materials and IP056 prohibiting mercury compounds is mandatory. Final inspection and acceptance occur at destination, and all items must arrive fully serviceable without requiring further sorting or repackaging by the recipient. The point of contact for inquiries is Michael Reese of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-298Q
The contract is for the procurement of invasive blood pressure transducer interface cables with a right-angle Edwards connector, specified as a single unit of issue per item. The item is regulated by the FDA, requiring confirmation from a product specialist through EBS with detailed manufacturer and part number information. Two approved suppliers are listed—McKesson Medical-Surgical and ZOLL Medical Corporation—with specific part numbers corresponding to the NSN 6515-01-615-0921. The order requires delivery of two units within twenty days, with FOB destination, zero variance allowed in quantity, and inspection and acceptance occurring at the delivery point. Packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in commercial containers suitable for protection and safe transport via common carrier at the lowest cost. Palletization, packaging, and labeling must adhere to DLA’s packaging requirements and ASTM D3951, though DLA’s technical and quality standards take precedence. The shipment must not use parcel post and must be sent by traceable means to two designated military addresses in Oklahoma and Okinawa, Japan. The contract references the DLA Master List of Technical and Quality Requirements and specifies stringent compliance with medical procurement standards.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CONTROL, INFRARED SE
Solicitation # SPE4A7-26-T-606E
The contract pertains to the procurement of two units of Control, Infrared SE with NSN 5850-01-595-9396 under solicitation SPE4A7-26-T-606E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of contract award, shipped FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization adhering to DLA’s packaging standards. The item must be shipped using the fastest traceable means and is explicitly excluded from parcel post delivery; the freight shipping address is in San Diego, California, with a designated hazmat receiving location. The required delivery date is July 27, 2026, and the solicitation response deadline was August 10, 2026, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Special marking is not required, and the unit of issue is each, priced at $2.00 per unit for a total of $4.00. Government-specific identifiers such as IPD, DIC, and ADV codes are included for internal use.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
SUTURE, ABSORBABLE, SURG
Solicitation # SPE2DS-26-T-295Y
This contract pertains to the procurement of absorbable surgical sutures designated as SUTURE, ABSORBABLE, SURGICAL, with specific product identifiers including NSN 6515-01-604-1426, part number FS-2/C-13/CE-4/C6/DS18, size 4-0, length 27 inches, and a needle length of 18.690 mm. The sutures are undyed, braided, and supplied in boxes of 36, with a total order quantity of three boxes. The item has a non-extendable shelf life of 60 months under shelf-life requirement RS001 for a TYPE I (CODE S) designation. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or RFP issue date, unless amended. Packaging must comply with DLA procurement standards, and government identification must be removed from non-accepted supplies. The item is classified as potentially containing covered defense information, and bidders are required to clearly specify the source and part number being submitted. The solicitation, identified as SPE2DS-26-T-295Y, was posted on August 2, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. The primary point of contact is Patrick Esposito, reachable via email and phone, and the place of performance is specified as Suffolk, Virginia, with a ZIP code of 23435-5000. Delivery must be completed within five days after delivery order authorization. The procurement falls under NAICS code 334511, indicating manufacturing of surgical and medical instruments, and is a federal solicitation with no set-aside designation. Bidders must ensure full compliance with all referenced technical, quality, packaging, and identification requirements, and provide accurate supply source and part details to meet contract obligations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
INTRODUCER, ENDOTRACHEA
Solicitation # SPE2DS-26-T-294J
The item is a disposable, sterile, single-use endotracheal tube introducer specifically designed for adult use with a coudé tip, graduated markings, and a 15 FR diameter with a 70 cm length, intended for use with endotracheal tubes ranging from 6.0 mm to 11 mm in diameter. Constructed from medical-grade plastic, it is supplied in packages of ten units per package, with a total quantity of six packages required for delivery. The product must maintain a shelf life of 60 months from the manufacturer’s date, with no more than nine months elapsed between manufacturing and delivery to the government. All labeling must conform to MMS1A standards and clearly display the manufacturer date, expiration or retest date, contract number, and lot number. The procurement is governed by DLA technical and quality requirements referenced in the Master List, and packaging must meet DLA standards. Government identification must be removed from non-accepted supplies. Bidders are required to specify the source and part number being offered. The NSN is 6515-01-600-1648, with a solicitation number of SPE2DS-26-T-294J, issued on August 2, 2026, with responses due by August 10, 2026. Delivery is to be completed within 20 days after award to Scott AFB, 62225-5219, under the Department of Defense’s Medical Supply Chain. The contracting officer is Michael Small, reachable at the provided contact details.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
INSERT, FEED
Solicitation # SPE7M5-26-T-364R
This contract, issued under solicitation number SPE7M5-26-T-364R by the Department of Defense’s Active Devices Division, requires the delivery of one unit of a specific item identified by NSN 5999-01-588-5553 and part number 4241071-1. Delivery is due within 10 days of contract award, FOB origin, with no variance allowed in quantity. The item must be packaged in strict adherence to DLA’s Packaging Requirements for Procurement, including compliance with MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All technical and quality requirements referenced by R or I numbers in the contract are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any industry standards. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The item must be shipped via the fastest traceable means, excluding parcel post, to the specified delivery address in Eastover, South Carolina, with all packaging clearly marked for W81BDW. The unit of issue is each, and the contract specifies no pricing details beyond a nominal quantity with a total price of $1.00, indicating this may be a nominal or administrative fulfillment. The original required delivery date is July 28, 2026, and all government-specific identifiers and data codes are included for internal tracking purposes only.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-298T
The contract specifies the supply of disposable adult electrocardiograph electrodes with a nominal diameter of 2.000 inches, designed for use with defibrillator/monitor-recorder systems identified by NSNs 6515-01-582-4060 and 6515-01-582-4072. Each electrode is radiolucent, features a high-tack foam backing, and uses wet gel with silver/silver chloride sensor technology. The product is packaged in units of 300 electrodes per case, with five electrodes per package and sixty packages per case. The unit of issue is PG/300EACH and the NSN for the item is 6515-01-592-7774. The contract requires compliance with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, and packaging must meet DLA specifications. Government identification must be removed from non-accepted supplies, and the contract includes provisions for covered defense information. Bidders must state the source and part number being offered, with a single package required for delivery within 20 days of award. The solicitation number is SPE2DS-26-T-298T, issued on August 2, 2026, with a response deadline of August 10, 2026, under the NAICS code 334511 for medical electrical equipment manufacturing, and is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
VALVE, RESUSCITATOR
Solicitation # SPE2DS-26-T-297V
The valve, resuscitator is a multi-layered barrier system featuring three distinct filtration layers and a one-way duck bill valve designed for use in resuscitation procedures. It includes top and bottom ports with an adjustable pressure range from 5 to 20 cm H2O and features a standardized 22 mm internal diameter ISO connector, enabling compatibility with any resuscitation bag flow diverter using the same connection size. Each unit is individually packaged and supplied in boxes of ten, ensuring sterility and readiness for immediate use. The product has a 60-month shelf life, with the condition that no more than nine months may have passed between the manufacturer’s date and the delivery date to the government, ensuring freshness and reliability in critical care environments. The item is identified by NSN 6515-01-620-0444 with a procurement quantity of two boxes under purchase request 7017693334, requiring delivery within 20 days of award. The solicitation, issued under SPE2DS-26-T-297V on August 2, 2026, with a response deadline of August 10, 2026, adheres to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including packaging standards and procedures for the removal of government identification from non-accepted supplies. The contract is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, with performance directed to APO 09094-3219 and primary point of contact Elizabeth Cruz. The NAICS code 334511 confirms classification under medical appliance and equipment manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CONNECTOR, TUBING, BRANC
Solicitation # SPE2DS-26-T-297Z
The contract specifies the procurement of a Y-type tubing connector with a 0.5 inch internal diameter, barbed ends, made of autoclavable polypropylene, delivered in dozens. The item is identified by NSN 6515-01-597-2727 and is supplied by Cardinal Health 200, LLC under part number F196180000. All materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and packaging must meet commercial standards as outlined in the procurement document, ensuring protection against damage and safe transportation via common carriers. Each unit must be sealed and packed in suitable exterior containers for delivery to the destination FOB point with no variance in quantity allowed. The item is regulated by the FDA and requires referral through EBS for confirmation by the product specialist, including detailed manufacturer and bidder information. Delivery is required within 20 days of contract award, with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E guidelines, and all marking must be in full compliance with the updated Medical Marking Standard No. 1, obtainable through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-297Z, is part of a broader defense medical supply initiative and includes technical and quality requirements referenced from the DLA Master List, governed by the revision in effect on the solicitation issue date. The contract is for a single dozen unit with a total price to be determined at award, and the delivery date is specified as August 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
SUPPORT, PELVIC
Solicitation # SPE2DS-26-T-294E
This contract specifies the procurement of a pelvic support device with Velcro and shoelace fastener, color green, designated as a temporary pelvic stabilization aid that must be cut to fit each individual patient. The item is regulated by the FDA and requires confirmation via a referral in EBS, including bidder and manufacturer details, part number, and product description. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be sealed in protective containers suitable for safe transport via common carriers under the lowest cost shipment method. The device must be marked and labeled per DLA requirements and palletized according to RP001 packaging standards, with strict adherence to ASTM D3951 unless overridden by higher-priority DLA technical or quality requirements. The National Stock Number is 6515-01-559-5855, and the manufacturer part number is GC-2000, with a single unit required and delivery due within 20 days FOB destination. The item must be shipped by traceable means, explicitly excluding parcel post, to the designated military facility in San Antonio, Texas. All documentation, identification, and compliance must align with DLA’s Master List of Technical and Quality Requirements, and the solicitation is governed by specifications effective as of the issue date. The contracting office is the Department of Defense, under Medical Supply Chain MD Surg FSF, with a required delivery date of August 3, 2026, and a response deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
SUTURE, ABSORBABLE, SURG
Solicitation # SPE2DS-26-T-294U
The contract is for absorbable surgical sutures composed of plastic glycolide-lactide copolymer, sized 5-0, 18 inches in length, with a 3/8 circle taper point, packaged in boxes of 36 units each. The item is classified under NSN 6515-01-604-0118 and has a non-extendable shelf life of 60 months, requiring strict adherence to storage and handling standards per RS023 and RS001 requirements. All supplies must comply with DLA packaging standards and include removal of government identification from non-accepted items, as outlined in RP001 and RQ011. The technical and quality criteria referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to potential covered defense information requirements under RD003, and bidders must clearly specify the source and part number being offered. The solicitation, identified as SPE2DS-26-T-294U, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days of award under purchase request 7017684473 for a single box.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
TAPE, ATHLETIC
Solicitation # SPE2DS-26-T-299M
Athletic tape, 2.75 inches wide and 30 yards long, in beige color, made with breathable foam and nonsterile, is being procured under NSN 6515-01-714-2078 with a quantity of two boxes, each containing twelve units. The product must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DS-26-T-299M, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within twenty days after order. The purchase request is 7017609499, and the place of performance is Fort Bragg, North Carolina, under the Department of Defense’s Medical Supply Chain. The NAICS code is 339112, and the procurement is managed by the Federal agency for medical surgical supply.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF SET, SPHYGMOMANOME
Solicitation # SPE2DS-26-T-294Y
The contract is for the procurement of four small adult aneroid sphygmomanometer cuff sets, each fully equipped with an inflation bulb, valve, one-piece inflation tube, and a shock-resistant, gear-free, latex-free reusable cuff-mounted aneroid gauge certified to an accuracy of ±3 mm Hg with a five-year warranty. The device must withstand drops from a height of 30 inches in compliance with AAMI standards and is designed for durability and reliability in clinical use. All components are specified to meet exact technical and quality criteria outlined in the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and requirements for removal of government identification from non-accepted supplies. The unit of issue is each, and bidders must clearly state the source and part number being offered. The item is identified by NSN 6515-01-648-3774 under solicitation SPE2DS-26-T-294Y, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF for delivery to Fort Hood, Texas, with a required delivery timeline of 20 days after order. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 339112 applies to medical equipment manufacturing, reflecting the specification and procurement intent under federal acquisition regulations. Bidders are expected to comply with all DLA packaging, identification, and technical compliance requirements as referenced in the solicitation, and no set-asides are indicated for this procurement.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 622110
New
DIBBS
PAPER, ELECTROCARDIO
Solicitation # SPE2DS-26-T-296Q
The contract is for the procurement of electrocardiogram recording paper, specifically a 19.6-foot roll with a red grid pattern, designated by NSN 6515-01-586-1986 and manufacturer part number 989803138171 from Philips Medical Systems. The unit of issue is the package (PG), with each package containing ten individual rolls, and the total quantity required is three packages, equivalent to thirty rolls. Delivery is required within five days to the U.S. Naval Hospital in Guam, FOB destination, with no variance allowed in quantity. The product is regulated by the FDA, and bidders must clearly indicate the country of origin and part number being supplied. All packaging must comply with commercial standards as specified in the procurement document, including sealed unit containers to prevent damage and commercial shipping containers suitable for safe transport at the lowest cost. Medical Marking Standard No. 1 supersedes MIL-STD-129 and must be followed for labeling, with copies available through DLA Troop Support. The item is intended for use with the 6515-01-582-4072 defibrillator/monitor-recorder system. Technical and quality requirements referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract also includes specific transportation instructions, government-use identifiers, and procurement details tied to the solicitation number SPE2DS-26-T-296Q, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
General Medical and Surgical Hospitals

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-298Z
The nonpneumatic tourniquet is a medically validated device designed to completely occlude blood flow in upper and lower extremities, verified through scientific methods at the U.S. Army Institute for Surgical Research. It features a one-handed, single-route buckle system with a reinforced windless and windless clip mechanism to ensure secure and rapid application. A reinforced stabilization plate with a beveled contact bar minimizes skin pinching, while a grey time tape and Velcro secure strap provide additional functionality and ease of use. The device is black in color with a red elliptical tip to assist users in locating and threading the strap during emergency application, and once applied, it locks in place via multiple clips for fail-safe retention. It is issued as a single unit and meets strict technical and quality standards as defined by the DLA Master List of Technical and Quality Requirements. This procurement under contract solicitation SPE2DS-26-T-298Z requires two units with delivery expected within five days of award, performed at Fort Bliss, Texas. The National Stock Number is 6515-01-521-7976 and the purchase request number is 7017693171. Bidders must clearly state the source and part number being offered. The solicitation is governed by DLA packaging requirements, applies to covered defense information, and mandates removal of government identification from non-accepted supplies. The contract falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain, and the primary point of contact is Olusola Emmanuel. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SHEARS, TRAUMA
Solicitation # SPE2DS-26-T-296C
The contract calls for two units of trauma shears, specifically 7.5 inch models with coyote brown handles and black titanium coated stainless steel blades featuring a blunt tip, designed for heavy-duty use. These shears are designated under NSN 6515-01-702-8905 and must be supplied with clear identification of the source and part number as required by the bidder. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue or award date depending on procurement scale. The item falls under packaging requirements specified by DLA and is subject to protocols for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-296C, was posted on August 2, 2026, with a response deadline of August 10, 2026. Delivery must be completed within 20 days after delivery order, to Fort Campbell, 42223-5000, under the Department of Defense’s Medical Supply Chain. The primary point of contact for inquiries is Dorothy Marquis, reachable via email or phone as listed.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL PREPARA
Solicitation # SPE2DS-26-T-300K
The contract pertains to the procurement of surgical preparation blades made of carbon steel, specifically single-edge, straight, 50S type, sourced from Pilling Surgical, Inc. (part number 450205) and American Safety Razor Co. (part number 74-0001), with the unit of issue being a package (PG) of 50 blades. The item is regulated by the FDA, requiring the contracting official to submit a referral in EBS to the product specialist, including manufacturer details, part number, and bidder information. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, with containers required to protect against damage and ensure safe delivery via common carrier at the lowest cost. All packaging and marking must meet DLA requirements, and the material is subject to Covered Defense Information provisions. The NSN is 6515-01-147-0210, with a single package quantity of 1 PG under purchase request 7017701239. Delivery is mandated within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DS-26-T-300K, with a response deadline of August 10, 2026, and the place of performance is WaterVliet, NY, 12189-5000. The NAICS code is 339112, and the procurement is for the Department of Defense through its Medical Supply Chain division.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-297M
The contract specifies the procurement of surgical sponges that are radiopaque, white, gauged, and sized at 4 inches by 8 inches, with ten sponges per container and a unit of issue of 800 sponges per package. These sponges are intended for use in operating rooms and must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Strict labeling requirements mandate that all packaging include the manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to protect contents from damage, and shipped in suitable exterior containers that ensure safe delivery at the lowest possible freight rate to the designated delivery point in APO, 09094-3219. If the product is not stored in a climate-controlled environment for a month or longer, the shelf life counter must be halved. All products must adhere to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and bidders must provide the source and part number. The solicitation was issued under contract number SPE2DS-26-T-297M with a deadline for response on August 10, 2026, and requires delivery within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTI
Solicitation # SPE2DS-26-T-297C
The contract specifies the procurement of Culture Medium for Motility Determination, identified by NSN 6550-01-732-8840, in a format of 15mm x 103mm tubes containing TTC indicator, with each package comprising twenty 5 mL units. The unit of issue is PG, and the order quantity is two PG. The item must have a shelf life of twelve months, non-extendable, with no more than one month elapsed between the date of manufacture and the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C revision. The product requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Packaging must be commercial-grade, sealed, and designed to prevent damage during transit, with shipping containers chosen to ensure safe and cost-effective delivery to the specified point of performance in Williamsburg, Virginia. The item is subject to Defense Logistics Agency packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date. Bidders must provide the source and part number of the item being offered, and the response deadline is August 10, 2026, with delivery required within five days after order award.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
All Other Health and Personal Care Retailers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGI
Solicitation # SPE2DS-26-T-294A
The contract specifies the procurement of 4 packaging groups, each containing 10 sterile, disposable thoracic drainage tubes, totaling 40 units. Each tube is 28 FR, radiopaque, straight, and designed for surgical use, with a required shelf life of 60 months that cannot be extended. The item is identified by NSN 6515-00-763-7367 and must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers. Packaging must adhere to DLA specifications, and all non-accepted supplies must have government identification removed prior to return. The contract includes provisions for covered defense information and requires bidders to clearly specify the manufacturer’s core and part numbers. The solicitation, issued under SPE2DS-26-T-294A, was posted on August 2, 2026, with responses due by August 10, 2026. Delivery is due within 20 days of award, with performance located at Fort Hood, Texas. The procurement falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain, with Chandler Alvarez as the point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-299S
The contract solicits adhesive bandages specified as BANDAID 1 inch by 3 inches flesh sterile and elastic adhesive bandages with a central gauze pad, with a unit of issue of a package containing 100 each. The National Stock Number is 6510-00-761-5062, and the quantity required is three packages, to be delivered within 20 days of award to Fort Bliss, Texas, with the delivery address ending in 79918-2527. All medical acquisitions under this solicitation must comply with commercial packaging standards, requiring each unit to be sealed in a container that protects against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support or their website. Bidders must specify the source and part number being supplied to ensure compliance with the technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, where revisions effective on the solicitation issue date or award date govern. The solicitation, identified as SPE2DS-26-T-299S, was posted on August 2, 2026, with a response deadline of August 10, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with Tiffany Parker as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-299V
The contract is for the procurement of two adult thigh sphygmomanometer cuffs, each including a compression bag, tubing, and connector, with nonconductive materials designated by NSN 6515-01-121-6480 and part number 0661-1884. The item is subject to FDA regulation and requires confirmation via EBS referral by the contracting official, including bidder and manufacturer details. The units must be supplied in compliance with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards, and packaged according to ASTM D3951 and Medical Marking Standard No. 1, superseding MIL-STD-129. Packaging must ensure protection from damage and be suitable for commercial shipping, with palletization following DLA packaging requirements. Delivery is FOB destination within 20 days of contract award, with strict 0% quantity variance and inspection and acceptance occurring at the delivery point. Shipment is directed to USS Tulsa (LCS-16), FPO AP 96691, under vessel shipment guidelines, and must be marked and labeled per specified protocols. The required delivery date is August 4, 2026, and bids must be submitted by August 10, 2026, under solicitation SPE2DS-26-T-299V, with pricing set at $2.00 per unit for a total of $4.00. Only approved vendors may submit, and the supplier must identify the source and part number being offered.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details