Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Cleaning Solvents Notice of Award

Awarded

2031ZA26A00017Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Bureau of Engraving and Printing awarded Blanket Purchase Agreement No. 2031ZA26A00017 to Miles Ahead Distribution, Inc. for the procurement of cleaning solvents. Awarded on August 31, 2026, the contract has a total estimated value of 496,594.00 dollars and is structured across five twelve-month ordering periods. This requirement was managed by the Department of the Treasury's Office of the Chief Procurement Officer and competed as a Total Small Business Set-Aside. The selection was finalized using the Lowest-Priced Technically Acceptable evaluation methodology after reviewing four submitted quotations. Performance for this contract is based in Washington, DC.

General Info

BEP awarded Miles Ahead Distribution $496,594 for cleaning solvents in Washington, DC.

Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

Contract Value

$0

NAICS

325199 - All Other Basic Organic Chemical Manufacturing

Place of Performance

Washington, DC, 20228, USA

Set-Aside

SBA

Awardee

MILES AHEAD DISTRIBUTION, INC.

Award Issued Date

09/01/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedOct 7

Award Notice

AwardedSep 1

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Contacts2 people available

OfficeWASHINGTON, DC, 20228, USA

Organization / AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Office AddressWASHINGTON, DC, 20228, USA

Contacts

Kendra Napper

contact@example.gov

Jason Roberts

contact@example.gov

Full Description

Show more

The Bureau of Engraving and Printing (BEP) awarded Blanket Purchase Agreement (BPA) No. 2031ZA26A00017 to Miles Ahead Distribution, Inc. in response to Solicitation No. 2031ZA26Q00086.

The BPA was awarded on August 31, 2026, with a total estimated value of $496,594.00, spanning five (5) twelve-month ordering periods. The requirement was competed as a Total Small Business Set-Aside, and four quotations were received in response to the solicitation.

Award was made using the Lowest-Priced Technically Acceptable (LPTA) evaluation methodology in accordance with the evaluation criteria established in the solicitation.

Similar Contracts

Same NAICS industry code

Certified Standard Gas Supplier (Analytical Grade)This subcontract, managed by the Technical Services Group in Ohio, establishes a partnership for the supply of analytical grade certified standard calibration gases. The scope of work involves providing high-purity gas mixtures, including UHP Helium, UHP Oxygen, Zero Air, and certified standards for Carbon Monoxide and Oxygen balance nitrogen, to support prime contractors working on NEORSD laboratory and analytical services projects. To maintain strict laboratory accuracy, the supplier must provide NIST-traceable Certificates of Analysis for every cylinder delivered. The opportunity is categorized under NAICS code 325199 and was posted on October 8, 2026. Interested parties must submit their responses by the deadline of November 3, 2026. This contract ensures that critical analytical services have access to the specialized, certified materials necessary for precise calibration and testing.

Technical Services Group

POSTED

DEADLINE

Fuel Additive SupplierThis subcontract agreement establishes a partnership for a Fuel Additive Supplier to provide winter blend additives for prime contractors working on Salt Lake County Division of Fleet Management projects. The supplier is responsible for delivering additives that are integrated into bulk fuel deliveries, ensuring that all products strictly adhere to Utah State governmental and industry specifications to maintain fuel performance during winter conditions. The opportunity is managed by the state of Utah under NAICS code 325199. Interested parties must submit their responses by the deadline of December 31, 2026. This contract focuses on the seamless integration of chemical additives into the existing fuel supply chain to support regional fleet operations.

POSTED

DEADLINE

Supplier of Electrical Insulating Compound (NSN 5970-01-013-8611)This subcontract involves the supply of nine quarts of electrical insulating compound, specifically COTS product NSN 5970-01-013-8611 Type I, for prime contractors working on DLA Weapons Support ASC projects. The material must comply with MIL-I-46058C and QPL-46058-87 standards and be delivered to Tinker AFB. The supplier is required to be compliant with the Buy American Act and possess the necessary capabilities to handle and ship DOT Class 3 hazardous materials, specifically Resin Solution UN1866 PG III. All packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 regulations.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Calibration Sodium Chloride Screw Cap VialsThis subcontract involves the supply of calibration vials containing sodium chloride for prime contractors working on DLA Troop Support Medical Supply Chain projects. The specific requirement is for NSN 6640-01-670-2305 vials featuring screw cap closures. All items must be packaged in sealed unit containers in accordance with Medical Marking Standard No. 1 and either ASTM D3951 or FED-STD-313. The Department of Defense requires the completed vials to be delivered FOB Destination to the ASD Norfolk Supply Department in Norfolk. The opportunity is categorized under NAICS code 325199, with a response deadline set for October 14, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Hazardous Chemical Reagent SupplyThis subcontract for the Defense Logistics Agency involves the supply of chemical indicators and reagents to prime contractors working on DLA Troop Support projects. The scope of work includes packaging specific boiler water analysis indicators in dropper bottles and providing all necessary Safety Data Sheets. All deliverables must be shipped in HazMat compliant packaging to ensure safety and regulatory adherence. The contractor must maintain strict compliance with the Hazard Communication Standard 29 CFR 1910.1200, the Buy American Act, and the Berry Amendment. This requirement falls under NAICS code 325199. Interested parties should note the response deadline of October 19, 2026.

Defense Logistics Agency

POSTED

DEADLINE

High-Purity Precursor and Reagent SupplyThis subcontract involves the sourcing and delivery of aerospace-grade high-purity chemical precursors and reagents to support Air Force Research Laboratory polymer synthesis projects. The selected provider must possess specialized capabilities for the storage and transport of high-purity chemicals and is required to provide Certificates of Analysis to ensure all materials meet strict purity targets for delivery to the production facility. The opportunity is a total small business set-aside under NAICS code 325199, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Managed under the United States Air Force and the Department of Defense, the solicitation was posted on October 7, 2026, with a response deadline of October 28, 2026.

United States Air Force

POSTED

DEADLINE

Specialized Fluid and Component SupplyThis subcontract, titled Specialized Fluid and Component Supply, involves the procurement of technical-grade liquids, seals, and lenses to support prime contractors under the DLA Weapons Support Strategic Acquisition Program Directorate. The scope of work focuses on sourcing high-visibility indicator fluids, precision-molded transparent housings, and high-pressure gaskets, which serve as the essential raw materials and components for constructing Liquid Sight Indicators. Managed by the Department of Defense, the contract requires strict adherence to the Buy American Act and the Berry Amendment. Interested parties must note the response deadline of October 21, 2026, for this requirement categorized under NAICS code 325199.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Bulk Potassium Carbonate (Liquid) SupplierThis subcontract agreement establishes a partnership for the supply of bulk liquid potassium carbonate to prime contractors working on water treatment projects for the Region of Halton. The supplier is responsible for manufacturing or sourcing the liquid at a 47 percent concentration by weight, ensuring all materials conform to NSF/ANSI Standard 60. To maintain quality control, the provider must furnish Certificates of Analysis along with comprehensive data regarding the origin and nature of the raw materials. The operational scope requires the delivery of 12,000 cubic feet of the chemical per month to a designated facility. Interested parties must submit their responses by November 5, 2026, in accordance with the solicitation posted on October 6, 2026. This procurement falls under NAICS code 325199 and is managed through the Region of Halton's bidding system.

Region of Halton

POSTED

DEADLINE

Bagged De-Icing Agent SupplierThis subcontract agreement establishes a partnership for the supply and delivery of bagged de-icing agents to prime contractors working on New York State agency projects. The scope of work specifically covers the provision of Calcium Chloride Flake Type S Class A and Pellet Type S Grade 2 Class B, both packaged in 50lb moisture-proof bags. The supplier is responsible for the palletization and delivery of these materials, ensuring that each pallet does not exceed 2000 lbs or 40 bags. This contract is managed under the New York State Office of General Services and falls under NAICS code 325199.

New York State Office of General Services

POSTED

DEADLINE

Gas Indicator Tube (Detector Tube) SupplyThis subcontract with the Department of Defense Active Devices Division involves the supply of 1,620 gas indicator detector tubes under NSN 6665-01-054-8160. The contractor is responsible for delivering these items to prime contractors fulfilling DLA supply contracts, with performance taking place in Tracy, California. All deliverables must strictly adhere to MIL-STD-2073-IE and RP001 packaging requirements, as well as MIL-STD-129 marking standards. The agreement mandates full compliance with the Buy American Act per DFARS 252.225-7001. Because the supplies involve hazardous materials, the contractor must follow IP025 and OSHA Hazard Communication Standards, ensuring that Safety Data Sheets are provided in accordance with Federal Standard No. 313-E. The opportunity is categorized under NAICS code 325199.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Membrane Filter Cleaning ChemicalsThis subcontract involves the supply of specialized membrane filter cleaning chemicals for prime contractors working on City of St. John's water treatment projects. The scope of work requires the manufacture or sourcing of Citric Acid at 50 percent, Sodium Bisulfite at 38 percent, and Sodium Hydroxide at 25 percent. All provided chemicals must strictly adhere to AWWA Standards and ANSI Standard NSF 60 to ensure safety and quality. The supplier is responsible for delivering the chemicals in 55 US Gallon drums with a UN Rating 1H1. Each delivery must be accompanied by a Certificate of Analysis and WHMIS 2015 Safety Data Sheets. The solicitation was posted on October 5, 2026, with a response deadline set for November 2, 2026.

City of St. John's

POSTED

DEADLINE

Soldering Flux and Solder Wiping Pads SupplierThis subcontract involves the supply of 309 units of soldering flux and solder wiping pads, identified by NSN 3439015102558, to support prime contractors delivering to the DLA Distribution DDSP New Cumberland Facility. The materials must be packaged according to ASTM-D-3951-98 standards and maintain a non-extendable shelf life of 24 months. The agreement requires strict adherence to FAR 52.223-3 regarding the identification of hazardous materials and the provision of Safety Data Sheets. Managed under NAICS code 325199 for the Department of Defense, the contract specifies delivery to New Cumberland, Pennsylvania, with a response deadline of October 15, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

Offset Blankets

Solicitation # 2031ZA26N00069

The Bureau of Engraving and Printing Office of Product Development intends to award a noncompetitive, Firm-Fixed-Price Indefinite Delivery / Indefinite Quantity (IDIQ) contract to I.T.G.-GmbH Graphic Products for the supply of offset and collector blankets. These specialized blankets are used for waterless offset printing on sheet-fed Simultan offset presses and as collector cylinder blankets on Super Orlof Intaglio presses for the production of U.S. currency at the DC and Western Currency Facilities. The contract is structured with five 12-month ordering periods and is being pursued under FAR 13.106-1(b) because only one source is reasonably available to meet the government's needs. Technical requirements are governed by BEP Specification B: OPP-2, Revision 2, which mandates that blankets be non-tacky, resistant to mineral oil-based inks, and possess a minimum service life of 200,000 impressions. Compliance is measured through rigorous standards, including ISO 12636-2018 for impression depth and ISO 13934-1 for elongation and tensile strength. Deliveries are to be made to facilities in Landover, Maryland, and Fort Worth, Texas, with strict packaging requirements involving wooden boxes and pallets that conform to Department of Transportation and OSHA Hazard Communication standards. The contractor must provide electronic inspection results, control charts for thickness, length, and width, and written certifications of compliance for each delivery. Due to the nature of the work, the contractor is required to sign a non-disclosure agreement regarding the manufacture of U.S. currency and must adhere to FAR Subpart 9.5 regarding Organizational Conflicts of Interest.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Cooling Tower, Roofing, and Structural Construction

Solicitation # 2031ZA26R00027

Solicitation 2031ZA26R00027 is a design-build project issued by the Bureau of Engraving and Printing for the assessment, demolition, and replacement of cooling towers and associated infrastructure at the District Currency Facility Main Building in Washington, DC. The scope of work includes replacing two Evapco cooling towers and one BAC tower, along with the associated structural steel platforms, roofing, mechanical, electrical, and SCADA control systems. The project requires lead-based paint abatement and adherence to IPC, ASHRAE, ASME, and National Electrical Code standards. The estimated contract value ranges between 1 million and 5 million dollars, with a performance period not to exceed 730 calendar days from the notice to proceed. This is a total small business set-aside under NAICS 236220. The government will utilize a best value trade-off methodology for award, where non-price factors—specifically corporate experience and past performance—are weighted more heavily than the technical approach, key personnel, project plan, and price. Proposals must be submitted in two separate volumes, with the technical volume limited to 15 pages. Per Amendment 0001, the response deadline has been extended to November 9, 2026. Awarded contractors must provide a performance bond for 10 percent of the contract amount and comply with Davis-Bacon Wage Determinations.

Commercial and Institutional Building Construction

POSTED

DEADLINE

WASTEWATER PRETREATMENT PLANT OPERATION AND MAINTENANCE SERVICES

Solicitation # 2031ZA26R00023

The Bureau of Engraving and Printing is soliciting firm-fixed-price contractor services for the 24/7 management, operation, and maintenance of the Industrial Wastewater Pretreatment Plant at its Washington, DC facility. The scope of work encompasses four primary systems: the Wiping Solution Wastewater Pretreatment Plant, the Plating Wastewater Pretreatment Plant, the Grease Trap Wastewater Pretreatment Plant, and the Wiping Solution Recycling Plant, as well as an on-site laboratory and materials storage area. The contractor is responsible for technical support, storm water activities, and the procurement of specific process chemicals and materials, including sodium hydroxide, sulfuric acid, and sodium bisulfite, while adhering to strict environmental, health, and safety standards and DC Water discharge permits. This 8(a) set-aside procurement features a performance period consisting of a phase-in period, a 12-month base year starting November 1, 2026, and four optional 12-month extension years, with a total potential contract value estimated between 8.1 million and 9.1 million dollars. Award evaluation may be based on either a trade-off method, prioritizing technical capability and past performance over price, or a lowest price technically acceptable basis. Key requirements include the provision of a certified monthly workforce report to verify small business performance and the implementation of a Quality Management System meeting ISO9001:2015 standards for chemical supplies.

Facilities Support Services

POSTED

DEADLINE

DCF Snow and Ice Removal Services

Solicitation # 2031ZA27Q00002

Landscaping Services

POSTED

DEADLINE

Maintenance Service for Portable Fire Extinguishers

Solicitation # 2031ZA27Q00001

Solicitation 2031ZA27Q00001 is a request for quotation issued by the Department of the Treasury, Bureau of Engraving and Printing, for portable fire extinguisher maintenance services at the DC Facility. This is a 100 percent small business set-aside under NAICS 541990. The contract is a firm-fixed-price purchase order consisting of a one year base period starting in December 2026 and four subsequent one year option periods, for a total duration not to exceed 60 months. The scope of work involves the annual inspection, testing, repair, and replacement of approximately 1,000 portable fire extinguishers in accordance with NFPA-10 and OSHA 29 CFR Part 1910 standards. Key requirements include annual tagging every December, six year teardowns for dry chemical extinguishers, and hydrostatic testing every five to twelve years depending on the extinguisher type. The government will award the contract to the lowest priced, technically acceptable offeror with no adverse past performance. Offerors must submit quotes in two separate volumes: a technical capability volume limited to 10 pages and a pricing volume. To be eligible, contractors must be ICC/NAFED certified and provide evidence of required hydrostatic testing records. An optional site visit is scheduled for October 15, 2026, and the final deadline for quote submission is October 22, 2026, at 3:00 PM ET. Awardees will be required to maintain worker's compensation, general liability, and automobile liability insurance and must submit electronic payment requests via the Invoice Processing Platform.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Fire Extinguisher Replacement Parts and Materials SupplyThis subcontract, managed by the Department of the Treasury's Office of the Chief Procurement Officer, involves the supply of essential materials, parts, and consumables required for the maintenance of portable fire extinguishers at Bureau of Engraving and Printing facilities in Washington. The scope of work includes providing annual plastic seals, color-coded inspection tags, valves, gauges, and various charging agents such as CO2 and ABC powder. All supplied items must strictly adhere to manufacturer specifications and NFPA-10 standards, with deliveries made directly to the BEP facility or designated maintenance subcontractors. The opportunity is designated as a total Small Business Set Aside under NAICS code 423450. Interested parties must submit their responses by October 19, 2026, following the posting date of October 1, 2026. This contract ensures that prime contractors have the necessary components to maintain fire safety equipment in compliance with federal and industry safety regulations.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Portable Fire Extinguisher Inspection and Maintenance ServicesThis subcontract opportunity is for the provision of inspection, maintenance, testing, and repair services for approximately 1,000 portable fire extinguishers at Bureau of Engraving and Printing facilities in Washington. The scope of work includes the servicing and tagging of ABC, BC/CO2, and Type K units in strict accordance with NFPA-10 standards. The selected contractor is responsible for delivering certified and tagged equipment along with a comprehensive annual Equipment Report. The project is designated as a total Small Business Set Aside under NAICS code 561790. To ensure quality and compliance, the contract requires technicians who are ICC/NAFED trained with a minimum of three years of professional experience. Interested parties must submit their responses by October 19, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Industrial Wooden Packaging SupplierThis subcontract opportunity, managed by the Department of the Treasury's Office of the Chief Procurement Officer, seeks a supplier to provide industrial-grade wooden packaging for prime contractors supporting the Bureau of Engraving and Printing. The selected provider will be responsible for the construction and delivery of specialized wooden crates designed to protect high-precision printing blankets during storage, handling, and shipping, ensuring all products meet strict BEP packaging and preservation standards. The project falls under NAICS code 321920 and is scheduled for performance in the 20228 zip code area. Interested parties must submit their responses by October 16, 2026, following the posting date of September 29, 2026.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE

Offset and Intaglio Collector Blanket SupplierThis subcontract, managed by the Department of the Treasury's Office of the Chief Procurement Officer, involves the supply of specialized conventional printing blankets for prime contractors working on Bureau of Engraving and Printing currency projects. The supplier is responsible for manufacturing blankets according to BEP Specification B: OPP-2, ensuring precise cuts perpendicular to the warp to prevent fraying. Rigorous quality control is required, with testing conducted per various ISO and ASTM standards, and finished products must be delivered in wooden boxes accompanied by electronic inspection reports. Compliance requirements for this engagement include signed non-disclosure agreements and adherence to organizational conflict of interest regulations. The opportunity is categorized under NAICS code 326199, with a response deadline of October 16, 2026. Performance of the contract is centered in the 20228 zip code area.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply Chain Strategy & Diversification ConsultantThe Supply Chain Strategy and Diversification Consultant subcontract, issued by the Department of the Treasury's Office of the Chief Procurement Officer, focuses on enhancing the resilience of currency production projects for the Bureau of Engraving and Printing. The selected consultant will perform detailed supply chain analyses for prime contractors, specifically mapping global fiber supply chains and utilizing market intelligence tools to identify alternative raw material sources. The primary objective is to mitigate risks associated with single-source dependency. Qualified candidates are expected to hold professional procurement certifications, such as the CPSM, to ensure high-level strategic execution. The final deliverables for this engagement include a comprehensive supply chain diversification report and a set of formal procurement strategy recommendations. This opportunity falls under NAICS code 541611, with a response deadline set for December 11, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 2 months

Substrate Technical Testing & Certification ServicesThe Substrate Technical Testing and Certification Services subcontract supports the Department of the Treasury's Bureau of Engraving and Printing by providing essential laboratory testing and technical analysis for currency projects. The selected provider will perform durability, wear-and-tear, and security feature integration testing utilizing chemical analysis and specialized stress-testing equipment. To ensure the highest standards of quality and accuracy, the contractor must maintain ISO/IEC 17025 certification. Managed by the Office of the Chief Procurement Officer under NAICS code 541380, the contract requires the delivery of comprehensive technical reports, validation data, and official certification documents. The solicitation was posted on September 28, 2026, with a response deadline of December 11, 2026. Performance of these technical services will take place in the 77416 zip code area.

Testing Laboratories and Services

POSTED

DEADLINE

in about 2 months

Alternative Fiber Substrate SupplierThis subcontract opportunity, managed by the Department of the Treasury's Office of the Chief Procurement Officer, seeks a supplier for alternative fiber substrates used in currency production for the Bureau of Engraving and Printing. The selected provider will manufacture high-durability, specialized fiber-based materials utilizing proprietary blends and sustainable bio-based sources to enhance the security and overall lifespan of the currency. The supplier is responsible for providing technical substrate specifications and physical material samples for government evaluation. Interested parties must submit their responses by December 11, 2026, under NAICS code 322120. Performance for this contract will take place in the 77416 zip code area.

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS