This Solicitation opportunity from Department Of Defense was posted on September 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CLIP, ELECTRICAL

Closed

SPE7M1-26-U-5751Federal

Submission Closed09/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334413

New

DIBBS

Supply of Insulator Plate (NSN 5970004232896)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Semiconductor Device, Diode (NSN 5961-01-026-2577)This subcontract, issued by the Department of Defense DLA Weapons Support Active Devices Division, requires the supply of two semiconductor diode units under NSN 5961-01-026-2577. The hardware must be delivered to Tobyhanna, Pennsylvania, and the supplier is required to hold qualifications for FSC 5961 and 5962. Strict adherence to military standards is mandatory, including packaging per MIL-STD-2073-1E and MIL-DTL-19491, and marking per MIL-STD-129 and IPC/JEDEC J-STD-609. Additionally, the provider must maintain full supply chain traceability in accordance with DLAD Procurement Note C03. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905-01-063-8462)This subcontract involves the supply of 5,000 fixed wire wound resistors for prime contractors supporting DLA supply contracts. The components must be manufactured or sourced to meet NSN 5905-01-063-8462 specifications. All items require strict adherence to marking standards MIL-STD-129 and IPC/JEDEC J-STD-609, with packaging performed according to MIL-STD-2073-1E and RP001. The contract is managed by the Department of Defense under the DLA Weapons Support Active Devices Division, with performance taking place at Hill AFB. Compliance with the Buy American Act and DFARS 252.204-7012 is mandatory. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Flashlights (NSN 6230014688129)This subcontract involves the procurement or manufacture of 457 flashlights for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. All units must strictly adhere to the technical specifications for NSN 6230014688129, with detailed technical data accessible via the DLA portal. The contractor is responsible for packaging the items according to MIL-STD-2073-1E standards and shipping them FOB Origin to the place of performance in Tracy, California. The opportunity is categorized under NAICS code 334413, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Fluorescent Lamp Supplier (NSN 6240-01-317-1381)This subcontract through the Defense Logistics Agency requires a supplier to provide 926 fluorescent lamps meeting NSN 6240-01-317-1381 specifications for Department of Defense prime contractors. The selected vendor must maintain an active SAM registration and ensure all materials are packaged according to ASTM D3951 and labeled in compliance with MIL-STD-129. The performance of this contract will take place in Phoenix, Arizona, under NAICS code 334413. Interested parties must submit their responses by the deadline of November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Push Switches (NSN 5930-01-062-4904)This subcontract involves the supply of push switches identified by NSN 5930-01-062-4904 for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The selected source or manufacturer must provide one unit of the specified switch, ensuring compliance with RP001 packaging requirements and strict mercury-free material restrictions. The use of approved additive manufacturing processes is permitted to meet the technical specifications. The opportunity is categorized under NAICS code 334413 and was posted on October 28, 2026, with a response deadline of November 9, 2026. All deliverables must be packaged according to DLA specifications to ensure successful integration into the maritime supply chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Air Transducer Assembly ManufacturingThis subcontract involves the manufacture and assembly of 115 calibrated air transducer units for prime contractors supporting DLA Troop Support supply contracts. The scope of work includes precision machining, assembly, and calibration of the transducer sensor and housing in strict accordance with NSN 4930-01-535-7810. Performance must adhere to the RA001 DLA Master List and the Buy American Act, with a specific prohibition against the use of additive manufacturing. The project is managed under NAICS code 334413 for the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this specialized production requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Fixed Wire Wound Noninductive ResistorsThis subcontract involves the supply of fixed, wire wound, noninductive resistors to prime contractors for DLA and Army electronic component contracts. The scope of work requires the manufacture or procurement of one unit of NSN 5905-01-106-7481, specifically Part RE80N38R3, in strict accordance with MIL-PRF-18546/2C(4) specifications. All deliverables must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 and IPC/JEDEC J-STD-609 for marking requirements. Managed by the Department of Defense under the DLA Weapons Support Active Devices Division, the contract is categorized under NAICS code 334413. The delivery terms are established as FOB Origin, with the place of performance located at Fort Bliss, Texas. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Film Resistor Networks (NSN 5905-01-351-3639)This subcontract involves the supply of two fixed film resistor networks, identified by NSN 5905013513639, for prime contractors supporting the DLA Weapons Support Active Devices Division. The performance of this contract takes place in Fort Bliss, Texas, and requires strict adherence to RP001 packaging, RA001 quality requirements, and MIL-STD-129 marking standards. To be eligible, providers must maintain quality systems certified under SAE AS9003 or ISO 9001. Additionally, the contract mandates cybersecurity compliance in accordance with DFARS 252.204-7012 and NIST SP 800-171. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Electronic Plug-in Sockets (NSN 5935-01-237-3880)This subcontract involves the supply of 150 electronic plug-in sockets, specifically TE Connectivity part 8-1437531-4 under NSN 5935-01-237-3880, to support prime contractors for the DLA Weapons Support Active Devices Division. The scope of work includes the manufacture or procurement of these components, with performance taking place in New Cumberland. Strict quality and logistical standards are required for this engagement. The provider must ensure packaging adheres to RP001 and marking follows MIL-STD-129. Furthermore, the contract mandates sampling compliance with MIL-STD-1916 or ASQ H1331, while requiring zero-nonconformance in accordance with MIL-STD-105/ASQ Z1.4.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Push Switch Supplier (NSN 5930-01-236-5641)This subcontract involves the manufacture or sourcing of a specific push switch for prime contractors supporting DLA supply contracts. The required component must conform to MIL-DTL-28786 and NSN 5930-01-236-5641. The scope of work includes the delivery of one push switch, which must be packaged and marked according to MIL-STD-129, with hazard labels applied per 29 CFR 1910.1200 where applicable. The contract is issued by the Department of Defense under the DLA Weapons Support Electrical Devices Division, with performance taking place in Ft Riley. Compliance with NIST SP 800-171 is mandatory for the supplier. Interested parties must respond by November 9, 2026, under NAICS code 334413.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Fixed Film Chip Resistors (NSN 5905014826118)This subcontract involves the procurement and manufacture of fixed film chip resistors for prime contractors supporting the DLA Weapons Support Active Devices Division. The contractor is responsible for providing resistors that strictly adhere to Part Number M55342M06B270JP and comply with MIL-PRF-55342/6H and MIL-PRF-55342J(2) SUP 1 standards. Additionally, the work requires lead finish identification according to IPC/JEDEC J-STD-609 and packaging that meets MIL-STD-2073-1E and MIL-STD-129 specifications. The project falls under NAICS code 334413 and requires full compliance with the Buy American Act. Performance of the contract is centered in Fort Bragg, with a response deadline set for November 9, 2026. The final deliverable is the completed resistor meeting all specified military and industry quality standards.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days

AI Contract Overview

Solicitation SPE7M1-26-U-5751 is a total small business set-aside issued by DLA Land and Maritime for the procurement of electrical clips, identified by NSN 5999002301212 and part piece number AA59466-007. This is a critical application item with an estimated quantity of 910 units. The requirement may result in a fixed-price, indefinite-quantity contract for a one-year period, with a maximum contract value of 350,000 dollars. Delivery is required within 69 days after receipt of order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and palletization must comply with RP001 and MIL-STD-2073-1E, while marking must follow MIL-STD-129. Environmental restrictions are in place, prohibiting the intentional addition of mercury or the use of Class I ozone-depleting substances. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. The procurement is managed by Bryan Fair of the Maritime Supply Chain office.

General Info

DLA small business set-aside for 910 electrical clips, max value 350,000 dollars.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN

NAICS

334413 - Semiconductor and Related Device Manufacturing

Place of Performance

OH, USA

Set-Aside

SBA

Documents

SPE7M1-26-U-5751 Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 9

Combined Synopsis

Deadline changedSep 24

Response deadline changed from Sep 24, 2026 to Sep 29, 2026.

Response DeadlineSep 29

Deadline has passed

Submission Closed

09/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Office AddressUSA

Contacts

Bryan Fair

contact@example.gov

+1 (555) 000-0000

Full Description

CLIP,ELECTRICAL
CLIP, ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
SPE7M1-26-U-5751
SECTION B
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FULL AND OPEN COMPETITION APPLIES.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-59466E REVISION NR E DTD 12/09/2025 PART PIECE NUMBER: AA59466-007
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000242949 0001 EA 910.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5999002301212
DELIVERY (IN DAYS):0069
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:010 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D1 OPI:M INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

SPE7M1-26-U-5751
SECTION B
PR: 1000242949 PRLI: 0001 CONT’D
SPE7M1-26-U-5751 NSN/Part Number: 5999-00-230-1212 Quantity: 910 EA Purchase Request: 1000242949QTY: 910 Delivery: 69 days ADO