This Solicitation opportunity from Department Of Defense was posted on April 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CLOTH, DUCK
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicitation SPE1C1-26-Q-0234 calls for the procurement of 100 yards of nylon duck cloth, designated by NSN 8305-00-926-6870 and part number PIA-C-7219, manufactured in strict compliance with Military Specification PIA-C-7219C dated April 9, 2013. The cloth must be 45 inches wide, weigh no more than 7.25 ounces per square yard before treatment, and feature a plain weave with a water-repellent finish classified as Class 3, intended for use in parachute packs and other military gear. The color must be Field Green, per ANA 627, ID: 34097, in accordance with SAE AMS-STD-595, replacing the canceled FED-STD-595C. Each roll must be a minimum of 40 yards, marked with the finisher’s roll number and date of manufacture, and labeled with fiber content per the Textile Fiber Products Identification Act. Certificates of Compliance must be submitted as outlined in TABLE III of PIA-C-7219C, supported by verifiable test data, and all lots must include test reports and component certifications aligned with DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements, Revision 1, dated August 2021. Full traceability of component materials is required, and the government reserves the right to conduct inspection and testing upon delivery. Packaging and marking adhere to MIL-STD-2073-1E Change 4 and MIL-STD-129R Change 2, requiring individual rolls to be in vendor-provided bags, with exterior containers as double-wall corrugated fiberboard meeting ASTM standards for strength and sealing. Palletization must comply with MIL-STD-147E Change 2, using four-way entry pallets with ISPM-15 compliant wood packaging bearing ALSC certification marks. All containers must include Data Matrix and linear barcodes containing NSN, CAGE code, PO number, and lot/batch identifiers. Delivery is due 120 days after award, with FOB Destination terms placing transportation responsibility and risk on the contractor until receipt at the designated location. Inspection and acceptance occur at destination, with the contractor solely responsible for meeting all quality and compliance obligations, though the government retains rights
General Info
Agency
NAICS
Place of Performance
515 N 51ST AVENUE NUMBER 130 DOCK 1, PHOENIX, AZ, 85043, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL NSN DATA
.
NSN 8305-00-926-6870; PGC90124
.
ITEM NAME: ,,CLOTH,DUCK
PART NUMBER: ,,PIA-C-7219
CAGE CODE: ,,1HHQ4 (Parachute Industry Association, Inc.) . Shall be in accordance with (IAW) Military Specification PIA-C-7219C, CLOTH, DUCK, NYLON dated 9 April 2013. . . The cloth is intended for use in the manufacture of parachute packs and other military items. . Width: 45 inches nominal Environmental protection: Water repellent Cloth Weight: 7.25 ounces per square yard maximum Weave Type: Plain, 1 up and 1 down Special features: Cloth weight represents weight before treatment Fiber material: Nylon basic Color: Field Green, ANA 627, ID: 34097, IAW AMS-STD-595; corresponds to Olive Green #106 according to e-mail & 6.3 of PIA-C-7219C Procurement Group Code (PGC): 90124 Type: III (7.25 oz./sq. yd. maximum) Class: 3 (Durable water repellent treated) Roll length: 40 yards minimum . Unit of issue is a YARD (YD). . Each roll of finished cloth shall be marked for identification in accordance with good commercial practice. Each roll shall be clearly and legibly marked with the finisher’s roll number or code, and each roll shall have attached a durable tag on which the finisher’s roll number or code is listed. The date of manufacture (see 3.12.1 of PIA-C-7219C) of the cloth shall be included on the tag attached to each roll. . Each roll of nylon cloth shall be labeled, ticketed, or invoiced for fiber content in accordance with the Textile Fiber Products Identification Act. . Certificates of Compliance shall be submitted in accordance with TABLE III of PIA-C-7219C and shall contain verifiable actual test and inspection data. The Government reserves the right to inspect and test the cloth to verify the validity of the Certification. . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH Revision 1 of the DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS dated August 2021 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)>
SPE1C1-26-Q-0234
SECTION B
SUPPLY/SERVICE: PGC: 90124 CONT'D
INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT
BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT
WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP
SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION
TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS
RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)>
EXAMINATION, AND TEST REQUIREMENTS SPECIFIED
HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT.
THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY
OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS
DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES
CONFORM TO PRESCRIBED REQUIREMENTS.
.
.
RT001: MEASURING AND TEST EQUIPMENT
.
FED-STD-595C, COLORS USED IN GOVERNMENT PROCUREMENT, AND ALL ASSOCIATED
SLASH SHEETS HAVE BEEN CANCELLED (FEBRUARY 14, 2017) AND SUPERSEDED BY
SAE AMS-STD-595.
ADDITIONAL INFORMATION FOR SAE AMS-STD-595:
COPIES OF SAE AMS-STD-595 CAN BE OBTAINED FROM:
WEBSITE: STORE.SAE.ORG/EA/
TELEPHONE: 877-606-7323 (INSIDE USA AND CANADA)
+1 724-776-4970 (OUTSIDE USA)
MAIL: SAE CUSTOMER SERVICE
400 COMMONWEALTH DRIVE
WARRENDALE, PA 15096-0001
.
.
.
LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS
a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. . 52.246-15 CERTIFICATE OF CONFORMANCE
. . SHADE NSN/Part Number: 8305-00-445-7825 Quantity: 100 YD Purchase Request: 7016514883QTY: 100 Delivery: 120 days ADO
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS