This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CLOTH, PARACHUTE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the procurement of 38,000 yards of parachute cloth, designated by NSN 8305-01-115-9168 and part number PIA-C-7020, sourced from CAGE Code 1HHQ4, the Parachute Industry Association, Inc. The material must conform strictly to PIA-C-7020E dated 19 June 2013, featuring a solid-color, nylon ripstop and twill weave with a maximum weight of 1.10 ounces per square yard and a maximum thickness of 0.003 inches. The fabric is heat-set, environmentally protected, and must be field green in color, matching ANA 627 per AMS-STD-595, which supersedes the canceled FED-STD-595C. Each roll must be between 50 and 100 yards minimum, with no more than two splices per shipper’s roll and no more than 10 percent of the total yards containing splices. The date of manufacture must be clearly marked on durable tags attached to each roll, and labeling must comply with the Textile Fiber Products Identification Act, including fiber content disclosure. Packaging must adhere to MIL-STD-2073-1E Change 4 and MIL-STD-129R Change 2, with each roll individually bagged and shipped in double-wall corrugated fiberboard boxes meeting ASTM D5118M standards. Palletization requires four-way entry pallets as defined in MIL-STD-147E Change 2, bonded with approved commercial materials, and wood packaging must comply with ISPM-15 and ALSC certification. All shipments are FOB destination to Zona Industries for the Blind in Phoenix, Arizona, with delivery required within 155 days of award. The cloth has a total shelf life of 60 months, with a minimum of 51 months remaining at government receipt. The contractor is fully responsible for meeting all inspection, testing, and quality assurance requirements as outlined in Revision 1 of the DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements dated August 2021, which mandates test reports and component certifications for each lot. Supply chain traceability must be retained per C03 clause, and sources of all component materials are locked in unless modified by official contract amendment. The contract incorporates
General Info
Agency
NAICS
Place of Performance
515 N 51ST AVENUE NUMBER 130 DOCK 1, PHOENIX, AZ, 85043, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL NSN DATA
.
NSN 8305-01-115-9168, PGC17566
.
ITEM NAME: ,,CLOTH,PARACHUTE
PART NUMBER: ,,PIA-C-7020
CAGE CODE: ,,1HHQ4 (Parachute Industry Association, Inc.) . Shall be in accordance with (IAW) Parachute Industry Association PIA-C-7020E, CLOTH, PARACHUTE, NYLON-RIP STOP AND TWILL WEAVE dated 19 June 2013. . The primary use of this cloth is in the manufacture of ejection and nonejection parachutes for personnel, cargo parachutes and other types of deceleration devices. However, it may be used as a base cloth in coated fabrics for other applications. . Width,,,,,,,,,, 60.5 inches to 72 inches Maximum Environmental Protection Heat resistant Weave Type,,,,,,,,Plain Cloth Weight,,,,,,,,1.10 ounces per square yard maximum Thickness: ,,,,,,,,0.003 inches maximum Features Provided,,,,,,Heat set Fabric Design,,,,,,,,Solid color-woven ripstop pattern Fiber Material,,,,,,,,Nylon basic Procurement Group Code,,,,17566 Type,,,,,,,,,,,,I (1.10 oz./sq. yd., Rip Stop Weave) Color: Field Green, ANA 627, ID: 34097, IAW AMS-STD-595; corresponds to Olive Green #106 according to e-mail & 6.3 of PIA-C-7219E . Length and put up: A shipper's roll shall be a minimum of 100 yards with a minimum piece size of 50 yards. A shipper's roll shall have a maximum of two splices with no more than 10 percent of the yards ordered containing splices. . The date of manufacture shall be included on the tag attached to each roll. . Each roll of the finished cloth shall be labeled or ticketed and invoiced for fiber content in accordance with the Rules and Regulations Under the Textile Fiber Products Identification Act. . Each roll of finished cloth shall be marked for identification in accordance with good commercial practice. In addition, each piece of cloth in each finisher's roll shall be clearly and legibly marked with the finisher's roll number or code,as specified in 4.4 of PIA-C-7020E, and each roll shall have attached a durable tag on which the finisher's roll number or code is listed. The date of manufacture (see 3.7) shall be included on the tag attachedto each roll. .
SPE1C1-26-Q-0295
SECTION B
SUPPLY/SERVICE: PGC: 17566 CONT'D
Unit of issue is a YARD (YD). . Total shelf life is 60 months (Code 9-Extendible) . There shall be a minimum of 51 months of shelf-life At the time of receipt from the first Government activity. . . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH Revision 1 of the DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS dated August 2021 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . . RT001: MEASURING AND TEST EQUIPMENT
.
FED-STD-595C, COLORS USED IN GOVERNMENT PROCUREMENT, AND ALL ASSOCIATED
SLASH SHEETS HAVE BEEN CANCELLED (FEBRUARY 14, 2017) AND SUPERSEDED BY
SAE AMS-STD-595.
ADDITIONAL INFORMATION FOR SAE AMS-STD-595:
COPIES OF SAE AMS-STD-595 CAN BE OBTAINED FROM:
WEBSITE: STORE.SAE.ORG/EA/
TELEPHONE: 877-606-7323 (INSIDE USA AND CANADA)
+1 724-776-4970 (OUTSIDE USA)
MAIL: SAE CUSTOMER SERVICE
400 COMMONWEALTH DRIVE
WARRENDALE, PA 15096-0001
.
.
.
LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS
a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. . 52.246-15 CERTIFICATE OF CONFORMANCE
. . SHADE NSN/Part Number: 8305-01-115-9168 Quantity: 38,000 YD Purchase Request: 7016929993QTY: 38000 Delivery: 155 days ADO
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS