Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Coaxial Cable

Active
Z5442State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service has issued solicitation Z5442 for the procurement of Type N female connectors for 7/8 inch foil and radiating coaxial cables, specifically part number NF-RA78-016. These connectors must be compatible with RLF, RLK, and RAY78-50A series, featuring a 50 ohm nominal impedance, a maximum frequency of 3.7 GHz, and an IP68 waterproof rating. Technical specifications require a brass body with tri-metal plating and silver-plated copper for both inner and outer contacts. The connectors are straight-sealing with a shrinking sleeve, measuring 78.4 mm in length with an outer diameter of 34 mm and a weight of 0.18 kg. Bids must be submitted through the Bid Center by 2:00 pm local time on November 3, 2026. The award process will strictly prohibit alternate brands, and bidders are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award. It is the vendor's responsibility to resolve any discrepancies between the part number and description with the procurement contact, Alan Martinez, prior to the closing date. Performance and delivery will take place in Nashville, Tennessee.

General Info

Nashville Electric Service is soliciting bids for specific Type N female connectors.

Agency

Tennessee → Nashville Electric Service

NAICS

334417 - Electronic Connector Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

Nashville Electric Service RFB Z5442 - Coaxial Connectors

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Alan MartinezProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
EA CONN TYPE N FEMALE FOR 7/8 FOIL COAX CONN TYPE N FEMALE FOR 7/8 RADIATING COAX (FOILSHIELD). TRANSMISSION LINE TYPE COAXIAL CABLE, SIZE 7/8". CABLETYPE RADIATING. MODELSERIES ALL RLF, RLK, AND RAY78-50A-SERIES CONNECTOR INTERFACE N NOMINAL IMPEDANCE,OHMS 50 CONNECTOR TYPE STRAIGHT SEALING METHOD SHRINKING SLEEVE GENDER FEMALE LENGTH, MM (IN) 78.4 (3.09) OUTERDIAMETER, MM (IN) 34 (1.33) WEIGHT, KG (LB) 0.18 (0.4) BODY MATERIAL BRASS/ PLATING: TRI METAL INNERCONTACT MATERIAL COPPER / PLATING: SILVER INNERCONTACT ATTACHMENTSPRING FINGER / PLATING: SILVER OUTERCONTACT ATTACHMENTSPRING LOOP / PLATING: SILVER MAXIMUM FREQUENCY,GHZ 3.7 WATERPROOFLEVELIP68 RADIOFR NF-RA78-016 Stateyour earliest delivery IN CALENDAR DAYS: _ DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the RFB: Close Date: Z544211/3/2026 Page: 2 of 2 published CLOSE DATE. _

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
Supply of Electrical Plug Connectors (MS3476W14-18S)This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the supply of 124 electrical plug connectors, part number MS3476W14-18S. These components are designated as critical application items and must be delivered to San Diego within 14 days of the contract award. The contractor is required to adhere to strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, CAGE code registration is mandatory for these Qualified Products List items. The procurement falls under NAICS code 334417 and supports prime contractors fulfilling DLA supply contracts.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Fiber Optic Plug Connector Supplier (NSN 6060-01-469-9707)This subcontract involves the supply of 692 fiber optic plug connectors for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The supplier is responsible for manufacturing or sourcing connectors that strictly conform to MIL-DTL-83522F and MIL-DTL-83522/16C specifications. All deliverables must adhere to the Buy American Act, the Berry Amendment, and mercury-free requirements, with packaging and marking performed according to MIL-STD-2073-1E and MIL-STD-129 standards. The project falls under NAICS code 334417 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this specific requirement associated with NSN 6060-01-469-9707.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
QPL Electrical Plug Connector SupplierThis subcontract involves the manufacture or procurement of 52 electrical plug connectors under NSN 5935010966194 for the DLA Weapons Support Nuclear Reactor Program. The components must be produced in strict accordance with MIL-DTL-55302/63H(2) and MIL-DTL-55302G(4) specifications. Performance will take place at Robins Air Force Base, with the primary objective of supplying these units to prime contractors. To be eligible, suppliers must hold QPL certification for Federal Stock Class 5935 and maintain compliance with NIST SP 800-171 standards. The opportunity is categorized under NAICS code 334417 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 9, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Qualified Manufacturer of MIL-DTL-38999 Electrical Receptacle ConnectorsThis subcontract involves the procurement of 156 electrical receptacle connectors to support prime contractors under the DLA Weapons Support Nuclear Reactor Program. The selected provider is responsible for manufacturing or sourcing these components from the Qualified Products List in strict accordance with MIL-DTL-38999/20H(1) Revision H and MIL-DTL-38999N(1) Revision N specifications. The contract mandates rigorous quality control and marking standards, specifically requiring adherence to MIL-STD-1916 or ASQ H1331 and MIL-STD-129. Additionally, the contractor must maintain NIST SP 800-171 compliance for cybersecurity. Performance for this requirement is centered at Robins Air Force Base, with the project falling under NAICS code 334417.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Supply of Electrical Plug Connectors (NSN 5935014321720)This subcontract involves the manufacture and supply of 3,729 electrical plug connectors under NSN 5935014321720 for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The project requires strict adherence to MIL-STD-129 marking standards and DFARS Buy American requirements, while maintaining compliance with prohibitions regarding Hexavalent Chromium and Communist Chinese Military Companies. The contract is categorized under NAICS code 334417 and specifies a place of performance in New Cumberland. Interested parties must note the response deadline of November 9, 2026, to provide the necessary components meeting all specified Department of Defense technical and regulatory standards.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Fiber Optic Connector Cable Clamp SupplyThis subcontract opportunity is for the manufacture or procurement of 6,235 fiber optic connector cable clamps under NSN 6060-01-467-9527 to support the DLA Weapons Support Nuclear Reactor Program. The contractor must ensure all units meet DLA Master List technical requirements and adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All deliverables must be shipped FOB Origin to New Cumberland, Pennsylvania. The project is designated as a Total Small Business Set-Aside under NAICS code 334417 and requires strict compliance with the Berry Amendment and the Buy American Act. Interested parties must submit their responses by November 9, 2026, to provide these essential components for prime contractors working with the Department of Defense.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Supply of Electrical Connector Covers (NSN 5935-01-388-5584)This subcontract involves the supply of 40 electrical connector covers, specifically Molded Devices, Inc. part number 901200-20-22, for the DLA Weapons Support Active Devices Division. The items, identified by NSN 5935-01-388-5584, are to be delivered to the Naval Undersea Warfare Center Division Keyport. All deliverables must adhere to MIL-STD-129 marking requirements and FED-STD-313/ASTM D3951 packaging standards. The contractor is required to maintain compliance with the Buy American Act and must undergo a NIST SP 800-171 cybersecurity assessment. This procurement falls under NAICS code 334417 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
Supply of Electrical Plug Connectors (NSN 5935-01-114-7025)This subcontract involves the supply of 29 specialized electrical plug connectors under NSN 5935-01-114-7025 for the DLA Weapons Support Nuclear Reactor Program. The components must strictly adhere to SAE AS34061 Revision B and SAE AS50151 Revision E standards. Additionally, the provider must ensure QPL/QML approval and maintain full compliance with the Buy American Act. Logistical requirements include packaging and marking according to MIL-DTL-55330, MIL-STD-2073-1E, and MIL-STD-129. The items are to be delivered FOB Origin to Tracy, California. This procurement falls under NAICS code 334417 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-27-T-0439
Solicitation SPE7M2-27-T-0439 is a small business set-aside issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 52 electrical plug connectors, identified by NSN 5935010966194. This is a qualified item requiring adherence to the Qualified Products List (QPL) for Federal Stock Class 5935 and must comply with technical specifications MIL-DTL-55302/63H(2) and MIL-DTL-55302G(4). The contract mandates strict adherence to preservation and packaging standards per MIL-DTL-55330 and MIL-STD-2073-1E, with marking requirements following MIL-STD-129. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware, except where functionally required and permitted by NAVSEA. Delivery is required within 167 days after order, with a need ship date of April 26, 2027, and a final required delivery date of June 25, 2027. The items are to be delivered to DLA Distribution Warner Robins in Georgia, with inspection and acceptance occurring at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is subject to various federal regulations, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements, as well as specific prohibitions on covered defense telecommunications equipment.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
MOLD, POTTING, ELECTRICA
Solicitation # SPE7M5-27-Q-0120
Solicitation SPE7M5-27-Q-0120 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 29 electrical connector potting molds (NSN 5935-01-488-7418). The items must be manufactured in accordance with basic specification MIL-DTL-24231/29A, reference specification MIL-DTL-24231E, and quality assurance provision QAP 16236 SQAP014887418. The contract is a firm fixed price award based on best value, evaluating past performance, offered delivery, and price. A critical requirement is the prohibition of Class I ozone-depleting substances in the manufacturing and testing processes unless written approval is granted by the contracting officer. The delivery process involves a mandatory First Article Testing (FAT) phase, requiring the contractor to test one unit and submit a report to DLA Maritime FMSE within 120 calendar days of the contract date. Final production delivery is required 438 days after the approval of the FAT report, resulting in a total delivery timeline of 678 days. Inspection for FAT is conducted at the source, while final acceptance and FOB point are at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Quality control must adhere to MIL-STD-1916 or ASQ H1331 zero-based sampling plans, and all packaging and marking must comply with MIL-STD-129 and RP001 requirements. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
SOCKET, PLUG-IN ELECTRO
Solicitation # SPE7M5-27-T-1650
Solicitation SPE7M5-27-T-1650 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of one plug-in electronic component socket. The required item is identified as TE Connectivity Corporation part number 4-1393159-8 with NSN 5935-01-659-5789. The contract specifies a delivery timeline of 20 days after award, with an original required delivery date of October 26, 2026. Delivery is FOB Origin, and the shipment must be sent via the fastest traceable means to the freight shipping address at Fort Riley, Kansas. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must maintain current representations in the System for Award Management and certify that they do not provide covered defense telecommunications equipment or services.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CONNE
Solicitation # SPE7M0-27-T-0818
Solicitation SPE7M0-27-T-0818 is issued by the Defense Logistics Agency for the procurement of one electrical connector cover, identified by NSN 5935-01-492-4938. The requirement is for a quantity of one unit to be delivered to Fort Riley, Kansas, with an original required delivery date of September 24, 2026. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes a price evaluation preference for HUBZone small business concerns. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards per MIL-STD-129, including specific physical identification and bare item marking. Significant regulatory requirements are in place, including CMMC Level 2 certification, safeguarding of covered defense information, and strict export controls under ITAR and EAR. Additionally, the contractor must comply with the Buy American Act and various DFARS prohibitions, including those against the acquisition of covered defense telecommunications equipment and the use of hexavalent chromium. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 423610
New
SLED
Supply of DPST Heavy-Duty Toggle SwitchesThis subcontract involves the procurement and delivery of 20 heavy-duty DPST two-position on-off toggle switches for prime contractors working on Nashville Electric Service projects. The required switches must feature screw terminals and meet minimum electrical ratings of 15A/120VAC and 10A/250VAC. Acceptable hardware is limited to specific manufacturer part numbers, including CarlingT EK204-73, Arrow HA 80421-U, or TE Connect 7402K4. The contract is categorized under NAICS code 423610 and requires the final delivery of units to Nashville, Tennessee. Interested parties must submit their responses by the deadline of November 4, 2026, at 8:00 PM.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
SLED
Type N Female Connectors for 7/8" Coaxial CableThis subcontract involves the supply of 12 specialized Type N female connectors, part number NF-RA78-016, for prime contractors working on Nashville Electric Service projects. These connectors must be compatible with RLF, RLK, and RAY78-50A series cables and feature specific technical requirements, including brass bodies with tri-metal plating, silver-plated copper contacts, 50 ohm impedance, and an IP68 waterproof rating. The order consists of straight-sealing connectors equipped with shrinking sleeves. The deliverables are to be shipped to Nashville, Tennessee. The opportunity was posted on October 28, 2026, with a response deadline of November 3, 2026. This procurement falls under NAICS code 334417.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423610
New
SLED
Supply of Solderless Ring-Tongue TerminalsThis subcontract involves the procurement and delivery of 8,000 solderless, ring-tongue, vinyl insulated electrical terminals for prime contractors working on Nashville Electric Service projects. The required specifications are #12-10 AWG with a #10 stud, and the items must be packaged in quantities of 500 per box. Eligible suppliers must be authorized distributors of either Panduit or Mecatrac brands, specifically providing part numbers PV10-10R-L, PV1010RD, or BE6M53D. The performance of this contract will take place in Nashville, Tennessee, with a response deadline set for November 4, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423610
New
SLED
Solderless Terminal
Solicitation # Z5437
Nashville Electric Service has issued Request For Bid Z5437 for the procurement of 8,000 solderless, ring-tongue, vinyl insulated terminals. The required specifications include a wire gauge of #12-10 AWG and a #10 stud, with items packaged at 500 per box. Acceptable products are strictly limited to Panduit part numbers PV10-10R-L or PV1010RD, and Mecatrac part number BE6M53D. Alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on November 4, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk. Performance and delivery will take place in Nashville, Tennessee.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
New
SLED
Toggle Switch
Solicitation # Z5440
Nashville Electric Service is issuing solicitation Z5440 for the procurement of heavy-duty DPST two-position on-off toggle switches with screw terminals. The required switches must meet minimum performance ratings of 15A/120VAC and 10A/250VAC. Only specific manufacturer part numbers are acceptable, including CarlingT EK204-73, Arrow HA 80421-U, and TE Connect 7402K4, as alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on November 4, 2026. Offerors are required to state their earliest delivery time in calendar days, which may be a factor in the award decision. For any discrepancies between part numbers and descriptions, vendors must contact the procurement officer, Shanna Faulk, for clarification prior to the closing date. Performance and delivery will take place in Nashville, Tennessee.

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423610
New
SLED
Supplier of 10-Pole Test Switches (C-C C-C C-C C-C P-P)This subcontract agreement involves the procurement and delivery of 20 units of 10-pole test switches for prime contractors working on Nashville Electric Service projects in Nashville. The required hardware must be back-connected switches featuring plastic covers and compatibility with a 1 1/2 inch panel, specifically configured in a C-C C-C C-C C-C P-P arrangement. To ensure technical compliance, the supplier must provide approved part numbers from MEGA BT701, STATES FMS-10ER, or ABB AUTO 837A407G01. The contract is categorized under NAICS code 423610, with a response deadline set for October 30, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 423610
New
SLED
Supplier of 10-Pole Test Switches (P P P P P P P P T T)This subcontract agreement involves the procurement and delivery of 30 units of 10-pole test switches for prime contractors working on Nashville Electric Service projects in Nashville. The required hardware must be back-connected switches featuring plastic covers and compatibility with a 1 1/2 inch panel, specifically configured in a P P P P P P P P T T arrangement. To ensure technical compliance, the supplier must provide approved part numbers from MEGA BT103, ABB AUTO 1586C42G23, or STATES FMS-10FC. The contract is categorized under NAICS code 423610 and was posted on October 27, 2026, with a response deadline of October 30, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423610
New
SLED
Supply of 2-Bolt Straight Suspension Cable ClampsThis subcontract involves the procurement and delivery of 200 specialized 2-bolt straight suspension cable clamps for prime contractors working on Nashville Electric Service projects. The required hardware must be 5-3/4 inches in length with a strand diameter ranging from 1/4 to 7/16 inches. To ensure quality and compatibility, the clamps must be sourced from approved manufacturers, specifically Maclean, Cooper, or Hubbell. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must adhere to the response deadline of November 2, 2026. The scope of work is strictly limited to the supply and delivery of the specified units to the designated agency location.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
SLED
Supply of Machine Bolts (5/8" x 12")This subcontract involves the procurement of 2,650 industrial-grade machine bolts measuring 5/8" x 12" to support prime contractors on Nashville Electric Service projects. The selected provider must source these components exclusively from approved manufacturers to ensure quality and compliance with project standards. All items must be delivered to Nashville and packaged in standard cartons as specified in the solicitation, with bulk packing strictly prohibited. The contract falls under NAICS code 332722 and requires fulfillment according to the guidelines set by the Nashville Electric Service.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
SLED
Supply of Carriage Bolts (3/8" x 4 1/2")This subcontract involves the sourcing and delivery of 2,250 industrial-grade carriage bolts measuring 3/8" x 4 1/2" for prime contractors working on Nashville Electric Service projects. The contractor is required to procure these units exclusively from approved manufacturers to ensure quality and compliance with project standards. All items must be delivered to Nashville and packaged in standard cartons as specified in the solicitation requirements, with bulk packing strictly prohibited. The contract falls under NAICS code 332722 and is managed through the Nashville Electric Service procurement system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS