Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COLLAR, PIN-RIVET

Active
SPE4A6-26-T-06SNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 583 units of a threaded pin-rivet collar identified by part number HS5583-6 and NSN 5320-00-777-2990, sourced under solicitation SPE4A6-26-T-06SN issued by the ASC Commodities Division of the Department of Defense. The delivery must be completed within 104 days of award, with the response deadline set for July 23, 2026, and the solicitation posted on July 15, 2026. Performance is required at Robins Air Force Base, Georgia, with Ericka Mosley listed as the primary point of contact. The item falls under NAICS code 332722 and is subject to comprehensive technical and quality requirements referenced from the DLA Master List, which dictates compliance based on the solicitation or award date depending on the acquisition size. Supplier compliance mandates adherence to cybersecurity requirements including CMMC Level 2 self-assessment or certification through a third-party assessment organization, as well as documentation for source approval, configuration change management, and physical item marking per RQ017. Packaging must conform to DLA standards and the removal of government identification from non-accepted supplies is required. Deviation requests must be formally submitted through an engineering change proposal or variance process. The contract applies to The Boeing Company and includes provisions for covered defense information, emphasizing data security and supply chain integrity throughout procurement and delivery.

General Info

583 threaded pin-rivet collars to be delivered to Robins AFB by October 2026 under CMMC Level 2 compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06SN.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ericka Mosley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COLLAR,PIN-RIVET
COLLAR,PIN-RIVET,THREADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
INCLUDE RQ032 OBJECT TEXT ID ST
THE BOEING CO (8V613)
P/N HS5583-6
ADEQUATE DATA FOR NSN/Part Number: 5320-00-777-2990 Quantity: 583 EA Purchase Request: 7017300901QTY: 5399 Delivery: 104 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 8 packages of hexagon cap screws, identified by NSN 5305-01-574-2396 and McMaster-Carr part number 91287A342, under solicitation SPE4A6-26-T-06RR. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance must occur at the destination. All items must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and container use, and must be marked according to MIL-STD-129 with no special marking code applied. Palletization must adhere to DLA packaging requirements, and sampling for quality assurance follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling compliance. The contract also mandates adherence to authorized units of issue and specifies the point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BEARING, WASHER, THRUThe contract specifies the procurement of two units of a bearing and flat washer, identified by NSN 3120-01-645-8719 and part number LS1528, under solicitation SPE4A6-26-T-06SQ. Delivery is required within 20 days to Rose Barracks, Vilseck, Germany, with FOB origin terms and inspection and acceptance occurring at the destination. The items must be packaged in compliance with ASTM D3951 and marked per MIL-STD-129, with palletization adhering to DLA packaging requirements RP001, and all packaging must reflect the specified unit of issue and quantity per unit pack. Quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. All technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The contract prohibits removal of government identification from non-accepted supplies and mandates physical identification of bare items per RQ017. The unit of issue is EA and the total price is $2.00, with no tolerance allowed for quantity variance. The items are destined for the 405th AFSB EUR at Rose Barracks under shipment RDD 777 and project code 9GU TP 2, with a required delivery date of June 8, 2026.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAININGThe contract is for the procurement of 14 retaining rings with NSN 5325-01-482-3702 under solicitation SPE7M2-26-T-5642, issued by the Department of Defense’s Nuclear Reactor Program. The item must be delivered FOB origin within 153 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, using preservation method 33 and unit pack code U, with marking adhering to MIL-STD-129 and no special marking codes. Mercury and mercury compounds are strictly prohibited in preservation, packaging, and contact with the hardware, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or specified reagents, with portable items containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the shipment must be handled per DLAD Proc Note C19 for transportation and C20 for first destination. The contract’s unit price is $14.00 per unit, totaling $196.00, with a required ship date of December 28, 2026, and an original delivery deadline of February 26, 2027. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined based on the solicitation or award date. The product is classified under NAICS code 332722 and must be furnished using the authorized DoD unit of issue.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract specifies the procurement of close tolerance screws identified by part number NAS1153-5 and NSN 5305009840633, with a unit of issue of HD (100 each per package). The item is classified as a commercial item and must comply strictly with the current revision of the NAS1151 through NAS1158 standards, Revision 17 dated 11/30/2024. All manufacturing must adhere to the latest applicable standard, though previously manufactured hardware conforming to earlier, then-current revisions remains acceptable. Inspection and verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise specified. Thread dimensional compliance for Class 3A and 3B threads must be verified per System 22 of FED-STD-H28/20, excluding small internal and external threads. Critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must conform to ASTM D3951 unless overridden by higher-priority DLA Master List of Technical and Quality Requirements, and all units must be marked and labeled per MIL-STD-129. Palletization follows DLA’s RP001 packaging requirements, and item identification shall align with MIL-STD-130N, paragraph 4.1.b(2), in addition to manufacturer, lot, and material markings. The contract includes two line items totaling 535 HD units, with delivery points at Albany, GA and Corpus Christi, TX. Both shipments are FOB origin, with inspection and acceptance occurring at destination. Quantity variance is strictly 0%, and the required delivery date is March 26, 2027, with ship dates mandated by July 17, 2026, and December 23, 2026. The solicitation number is SPE4A6-26-T-06QR, issued under NAICS code 332722 by the Department of Defense’s ASC Commodities Division, with Lisa Harvie designated as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKETThe contract pertains to the supply of a gasket identified by NSN 5330-01-558-6815, with a quantity of one unit, under solicitation SPE7L3-26-T-118C, issued by the Department of Defense through the Land Supplier Ops Vehicle Support organization. The item must be delivered within 20 days after order date to Boise, Idaho, with a response deadline of July 27, 2026. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gasket must be free of asbestos, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the item, except for functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents approved by NAVSEA, with portable mercury-containing devices required to have shock-proof construction and a secondary containment layer as per NAVSEA 5100-003D. All requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for this acquisition.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details