Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Combined Synopsis and Solicitation for Water Distiller Spare Parts

Active
PR16021858Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Embassy Dhaka in Bangladesh is seeking quotations for water distiller spare parts under solicitation number PR16021858, using Simplified Acquisition Procedures as outlined in FAR 13. This combined synopsis and solicitation is open to all responsible sources, with awards to be made based on the Lowest Priced, Technically Acceptable approach, meaning the lowest quote that meets all technical requirements will be selected. Offerors may submit bids for the specified brand names or equivalent products, but they must clearly demonstrate that their alternatives satisfy all stated specifications. The government reserves the right to award the contract based solely on initial quotations without initiating discussions, though discussions may occur if deemed necessary for the government’s benefit. All responses must be submitted by the deadline of August 9, 2026, at 10:30 AM, with the solicitation posted on July 27, 2026. The North American Industry Classification System code is 444180, and no set-aside preferences are applied, making this opportunity open to all qualifying vendors. The place of performance is Dhaka, Bangladesh, with the contracting office located in Washington, DC. Primary point of contact for inquiries is Iftekhar Ahmed, reachable via email at Ahmedix2@State.Gov. The electronic solicitation can be accessed through the provided SAM.gov link for full details and submission.

General Info

U.S. Embassy Dhaka seeks lowest priced, technically acceptable water distiller spare parts by August 9, 2026, open to all vendors.

Agency

Department Of State → US Embassy DhakaView Agency

NAICS

444180 - Other Building Material DealersView NAICS

Place of Performance

Dhaka, BD-13, 1212, BGD

Set-Aside

NONE

Documents

(1)

PR16021858_RFQ+Combined+Synopsis+and+Solicitation+for+Water+Distiller+Spare+Parts.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of State → US Embassy Dhaka
Contacts1 person available
OfficeWASHINGTON, DC, 20520, USA
Organization / Agency
Department Of State → US Embassy Dhaka
View Agency Profile
Office AddressWASHINGTON, DC, 20520, USA
Contacts
Iftekhar Ahmed
contact@example.gov

Full Description

Show more

U.S. Embassy Dhaka in Bangladesh is issuing this combined synopsis and solicitation for water distiller spare
parts. This announcement constitutes only solicitation. The solicitation number is PR16021858. The
resultant purchase order will be awarded using Simplified Acquisition Procedures in accordance with FAR
13. All responsible sources may submit a quotation. 
The evaluation of offers will be based on the Lowest Priced, Technically Acceptable (LPTA) approach.
The Embassy will accept offers for the requested brand names or equal products. It is the offeror’s
responsibility to prove that the goods offered meet the requested specifications. We intend to award a
contract based on an initial quote, without holding discussions, although we may hold discussions if it is in
the best interest of the Government to do so.

Similar Contracts

Same NAICS industry code

NAICS: 444180
New
DIBBS
ANTENNAThe contract pertains to the procurement of 17 antennas with NSN/Part Number 5985-01-632-5803 under solicitation SPE7M5-26-T-341L, issued by the Department of Defense’s Active Devices Division. Delivery is required within 168 days of award, and responses must be submitted by August 3, 2026. The solicitation incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Contractors must comply with all applicable DLA packaging and data requirements, including the removal of government identification from non-accepted supplies and handling of covered defense information. The alternate offeror is obligated to provide a complete data package encompassing both the approved and alternative part. The place of performance is specified as Tracy, California, 95304-5000, and all inquiries should be directed to Matthew Stanko at fmtewiq@dla.mil or 312-850-7245. The contract falls under NAICS code 444180 and is a federal procurement with no set-aside designation.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR, MODULAR PThe contract specifies the procurement of a modular electrical plug connector under NSN 5935-01-530-8108, with a quantity of 199 units, to be delivered within 168 days to the designated DLA warehouse in Tracy, California. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging and preservation must strictly comply with MIL-STD-2073-1E and MIL-DTL-55330, including specific requirements for removable crimp-type contacts, which must be stored separately in noncorrosive rigid containers within the unit container. Marking follows MIL-STD-129 with no special codes, and palletization adheres to DLA packaging standards. The use of ozone-depleting substances is prohibited unless authorized in writing by the contracting officer, and mercury or mercury-containing compounds are banned except in enumerated exceptions such as functional batteries, fluorescent lights, sensors, and weapon systems, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements as the source for all incorporated R and I numbers, and the applicable revision is controlled by the solicitation issue date or award date depending on acquisition size. The supplier must meet all commercial item exceptions defined in FAR 11.001, and transportation and shipping instructions follow DLAD procedural notes C19 and C20. The solicitation was issued on July 23, 2026, with responses due by August 3, 2026, under contract number SPE7M5-26-T-348H, and the item is sourced from approved suppliers including COMMSCOPE TECHNOLOGIES LLC and THALES NEDERLAND B.V.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
PIN PLUG BASE KITThe PIN PLUG BASE KIT, identified by NSN 5935-01-629-6064 and part number 78535-100674, is procured under solicitation SPE7M5-26-T-350A with a required delivery within 20 days of award, to be shipped FOB origin. The contract mandates strict adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with special marking code ZZ indicating additional special requirements. Shelf life compliance is governed by RS001 for a TYPE 2 (CODE 1) item with an extendable 3-month shelf life. The item must be delivered in a single KT unit with no variance in quantity, inspected and accepted at destination, and shipped using the fastest traceable means—parcel post is explicitly prohibited. Packaging and palletization must conform to DLA’s RP001 requirements and IP025 guidelines for hazardous materials. Delivery is directed to the 6th Communication BN FHG MFR in Brooklyn, NY, with detailed freight and shipping addresses provided. The item is subject to DLA’s master list of technical and quality requirements referenced via R and I numbers, and all documentation must reflect the applicable revision in effect on the solicitation issue date. The contract includes specific unit of issue and purchase unit alignment per ANSI X12 standards and requires compliance with government identification removal protocols for non-accepted supplies. The original required delivery date is July 21, 2026, and the procurement is managed by the Department of Defense’s Active Devices Division with primary point of contact Margaret Smith.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
AMPLIFIER, AUDIO FREThe contract pertains to the procurement of two audio frequency amplifiers, identified by NSN 5996-01-685-3144 and part number 265-002 from NAT SEATTLE INC, under solicitation SPE7M5-26-T-348T. The item must fully comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any referenced specifications including ASTM D3951. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the contracting officer, though this restriction does not apply to commercial items as defined in FAR 11.001 or to part-numbered-only items. The technical data provided is incomplete, so the delivered product must meet both the cited technical data and the part-numbered requirements. Packaging must adhere strictly to MIL-STD-129 marking and labeling standards, as well as RP001 DLA Packaging Requirements for Procurement and ASTM D3951, with palletization conforming to RP001. The unit of issue is each, with a fixed quantity of two units and no variance allowed. Delivery is required FOB origin, with inspection and acceptance occurring at the destination. The goods must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, by January 19, 2027, which supersedes the original required delivery date of May 4, 2027. Transportation details are governed by DLAD Proc Notes C19 and C20, and all packaging must reflect the correct Unit of Issue and Quantity per Unit Pack as stipulated in the contract.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
FOUNTAIN, EYE AND FACEThe contract is for the procurement of 260 portable, self-contained eye and face wash stations, manufactured by Bradley Corporation with part number S19-921 and NSN 4240012341796, under a total small business set-aside solicitation SPE8E6-26-T-3792. Each unit must meet ANSI Z358.1 standards for emergency eyewash equipment, featuring gravity flow, a seven-gallon capacity, and a 15-minute continuous flush capability, with an included eight-ounce bottle of water preservative. The stations are to be counter or wall mounted and fully compliant with DLA packaging and quality requirements, including the DLA Master List of Technical and Quality Requirements referenced by R-numbers. Mercury or mercury-containing compounds are strictly prohibited in the hardware or supplies, except for limited functional uses such as batteries, fluorescent lights, sensors, or specialized instrumentation, with all mercury-containing portable lamps and instruments requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with cold/dry preservation (method 10), no preservative or cushioning materials, using intermediate container D3 and standard packaging code U. Marking must follow MIL-STD-129, with no special marking required, and units must bear the specified federal shipping address at New Cumberland, Pennsylvania. The contract is a firm-fixed-price acquisition under simplified procedures with delivery required within 28 days of order placement, FOB Origin, and zero tolerance for quantity variance. Inspection and acceptance occur at the destination facility, and payment is processed exclusively through Wide Area WorkFlow (WAWF). The solicitation includes critical cybersecurity and information security clauses such as 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, 252.204-7018 prohibiting the acquisition of equipment from restricted telecommunications vendors, and 252.232-7010 for levies on payments, along with compliance requirements for equal opportunity, trafficking in persons, and employment eligibility verification, with deviations applied to several clauses to tailor obligations. Offerors must be certified small businesses with a valid UEI and CAGE code, and must affirmatively represent no involvement with covered defense telecommunications equipment from prohibited sources. All submissions must be made electronically via the D
DDSP NEW CUMBERLAND FACILITY

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR ASSEMBLY,The contract pertains to the procurement of a connector assembly identified by part number TRK-100290A-AC-K3C and NSN 5935-01-632-3942, with a required quantity of 42 units delivered FOB origin within 91 days. The item is classified as a critical application item under a total small business set-aside, and the contract is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions are in place against the intentional use of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and approved chemical reagents, with additional requirements for shock-proof containment in portable devices. The use of class I ozone-depleting substances is expressly forbidden in all phases of design, manufacturing, and testing unless written approval from the contracting officer is obtained, though this restriction does not apply to commercial items or part-numbered-only items. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging standards. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS, and unit of issue is each.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
DIBBS
COIL, ELECTRICALThe contract is for one electrical coil identified by NSN 5950-01-543-6687 and part number 102867, issued under solicitation SPE7M1-26-T-221W to be delivered within 20 days from the required delivery date of July 20, 2026. The item is a critical application component with strict packaging requirements mandating compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under Fed-Std-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable but subject to higher-priority DLA standards. The unit of issue is one each, with zero variance allowed on quantity, and delivery is FOB origin with inspection and acceptance occurring at the destination. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and must be addressed to the USS SOMERSET LPD 25 at FPO AP 96678. The vendor is required to use the VSM system for freight shipments, and the contract includes specific government use codes and a primary point of contact at DLA. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under a federal procurement framework managed by the Department of Defense.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
EARPHONEThe contract solicitation SPE7M1-26-U-4814 issued by the Department of Defense through the Maritime Supply Chain for the procurement of 56 units of an earphone with NSN 5965145592139 is an indefinite delivery contract with estimated quantities and no binding purchase obligation until a delivery order is issued. Delivery is required within 87 days of order placement, FOB origin, with inspection and acceptance occurring at the destination point under the authority of FAR 52.246-2. The product must be packaged in accordance with MIL-STD-2073-1E using preservation method 41, clean and dry, with no preservation or wrap materials required, and marked per MIL-STD-129 including 2D Data Matrix barcodes for logistics tracking. Packaging and palletization must comply with DLA’s RP001 requirements. Sampling for quality assessment follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. The contract incorporates numerous FAR and DFARS clauses including cybersecurity requirements under 252.204-7012 and 252.240-7997, mandating compliance with NIST SP 800-171 and a CMMC Level 2 self-assessment. Hazardous materials must be labeled per MIL-STD-129 and 29 CFR 1910.1200 with pre-award submission of safety data sheets required. The contractor must disclose entity information including UEI and CAGE code and certify small business status if applicable. Invoicing is mandated through WAWF and must align with payment and accounting data defined in the resulting award. The contract maximum value is capped at $350,000 per order, though no unit price is specified in the CLIN, making the total value indeterminate until pricing is established in a delivery order. Proposals must be submitted electronically via DIBBS by August 6, 2026, and are subject to compliance with all referenced technical, quality, packaging, and cybersecurity requirements from the DLA
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
Federal
59--EARPHONEThe solicitation seeks the procurement of 56 earphones under NSN 5965145592139, with an estimated annual order volume of one and a guaranteed minimum of eight units. The contract, if awarded, may become an Indefinite Delivery Contract with a term of one year or until the aggregate value of all orders reaches $350,000. Deliveries will be made to multiple CONUS and OCONUS locations via DLA depot consolidation points. Only approved sources listed as 23386 F1419420 and F9111 F1419420 are eligible to respond. This is an RFQ issued under solicitation number SPE7M126U4814, with responses due by August 6, 2026, and all quotes must be submitted electronically; no hard copies are available. Specifications, plans, or drawings are not provided. The procurement is open to all responsible sources, and offers must be received by the deadline to be considered. The contracting office is part of DLA Land and Maritime, located in Columbus, Ohio, with inquiries directed solely to the designated point of contact via email.
DLA Land And Maritime

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
Federal
59--CONNECTOR ASSEMBLY,The solicitation seeks quotes for 42 connector assemblies under NSN 5935016323942 through a total small business set-aside, with eligibility restricted to certified small businesses. The contract, if awarded, may take the form of an automated indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with a guaranteed minimum order of six units. The sole approved source is 1CJX2 TRK-100290A-AC-K3C, and deliveries will be made to multiple CONUS and OCONUS Defense Logistics Agency depots via consolidated and containerized shipping points. Quotes must be submitted electronically via the provided SAM.gov link before the deadline of August 6, 2026, with no hard copy solicitations available. No technical specifications, plans, or drawings are provided, and all responsible small business sources are encouraged to respond if submissions are received on time. The procuring activity is the DLA Land and Maritime office in Columbus, Ohio, with inquiries directed to the designated point of contact via email.
DLA Land And Maritime

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
Federal
42--FOUNTAIN,EYE AND FACEThe contract is a small business set-aside solicitation for 260 units of the fountain, eye and face item with NSN 4240012341796, issued by the Defense Logistics Agency Troop Support under solicitation number SPE8E626T3792. The procurement is exclusively reserved for small businesses as defined by the SBA, and all responsible suppliers may submit electronic quotes, which must be received by August 3, 2026. The approved source for this item is 08380 S19-921, and delivery is required to DLA Distribution at location W1A8 within 28 days of order placement. No hard copies of the solicitation are available; interested parties must access the RFQ electronically via the provided link, and no specifications, plans, or drawings are provided. The point of contact for inquiries is listed via email, with guidance directing questions to the buyer identified in block 5 of the solicitation document. The procurement falls under NAICS code 444180 and is managed from the agency’s office in Philadelphia, Pennsylvania.
DLA Troop Support

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
SPLICE, CONDUCTORThis contract is for the procurement of 155 units of a commercial off the shelf splice conductor with NSN 5940-01-552-9015 and part number D150-0321 from TE Connectivity Corporation. Delivery is required FOB origin within 171 days, with the original delivery date set for November 22, 2026 and a needed ship date of January 17, 2027. The contract specifies zero tolerance for quantity variance, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 labeling and marking standards, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications from the DLA Master List take precedence over any other standard. The item is classified as a critical application item and is subject to cybersecurity requirements including CMMC Level 2 self-assessment and applies to covered defense information under RD002. Documentation for source approval must be submitted per RC001, and government identification must be removed from non-accepted supplies as per RQ011. The unit of issue is each, with a unit price of $155.000 and a total contract value of $24,025. Deliveries must be shipped to DLA Distribution Depot Hill at Hill AFB, Utah, with transportation governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-584R, issued on July 21, 2026, with responses due by July 29, 2026, under the Department of Defense’s ASC Supplier Oper AE and AF Division, with Hannah Leonard listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

7 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of State → US Embassy Dhaka

Same awarding agency

NAICS: 333921
New
Federal
Combined Synopsis and Solicitation Spare Parts for Chancery ElevatorThe U.S. Embassy Dhaka is soliciting quotations for spare parts for elevators at its chancery in Dhaka, Bangladesh, under solicitation number PR16068125, with a response deadline of August 9, 2026. This combined synopsis and solicitation uses Simplified Acquisition Procedures as outlined in FAR 13 and is open to all responsible sources without any small business set-aside. Offers must be submitted for the specified brand names or equivalent products, and it is the responsibility of each offeror to demonstrate that their submitted items fully meet the required technical specifications. The award will be made using the Lowest Priced, Technically Acceptable approach, meaning the cheapest quote that meets all technical requirements will be selected, and the government does not intend to conduct discussions with offerors unless deemed necessary in its best interest. The contract will be awarded based on initial submissions, and performance is required at the Dhaka chancery with a zip code of 1212. The solicitation is administered by the Department of State through the U.S. Embassy in Dhaka, with the primary point of contact being Iftekhar Ahmed, reachable at Ahmedix2@State.Gov. The North American Industry Classification System code for this requirement is 333921, which relates to elevator and escalator manufacturing. Although the office address listed is in Washington, D.C., the physical delivery and installation of the spare parts must occur at the embassy’s location in Dhaka, Bangladesh. The posting date for this opportunity is July 27, 2026, and interested parties must submit their quotations before the specified deadline to be considered for award. All submissions must comply with technical requirements and pricing terms as outlined in the solicitation.
Elevator and Moving Stairway Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335210
New
Federal
Combined Synopsis and Solicitation for Water Distillers.The U.S. Embassy Dhaka is soliciting quotations for water distillers under solicitation number PR15968351, using Simplified Acquisition Procedures as outlined in FAR 13. This combined synopsis and solicitation is open to all responsible sources, with awards to be made based on the Lowest Priced, Technically Acceptable approach, meaning that while price is the primary factor, all submitted offerings must meet the specified technical requirements. Offerors may propose the named brand or equal products, but bear full responsibility for demonstrating equivalency in performance, quality, and compliance with all stated specifications. The government reserves the right to award the contract based solely on initial submissions without further negotiation, though discussions may be initiated if deemed beneficial to the government’s interests. The deadline for responses is August 9, 2026, at 10:30 AM, and the solicitation was posted on July 27, 2026. The North American Industry Classification System code is 335210, identifying the procurement within the appliance manufacturing sector. The contract will be performed in Dhaka, Bangladesh, with the awarding agency being the U.S. Embassy Dhaka under the Department of State. The primary point of contact is Iftekhar Ahmed, reachable at Ahmedix2@State.Gov, and the procurement is not set aside for any specific small business category. The official solicitation can be accessed through the SAM.gov portal.
Small Electrical Appliance Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 312112
Federal
Beverage and Water Logistics
Bottled Water Manufacturing

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 322291
Federal
Disposable Catering Supplies Provision
Sanitary Paper Product Manufacturing

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 311919
Federal
Prepared Food Item Supply (Bulk Meal Components)
Other Snack Food Manufacturing

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 722310
Federal
Onsite Event Catering Services
Food Service Contractors

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 311
Federal
Onsite Catering Services for U. S. Embassy Dhaka for events as per needed basis.The U.S. Embassy in Dhaka is soliciting bids for onsite catering services to be provided on an as-needed basis for official events, with responses due by July 30, 2026. The solicitation, numbered OnSiteCateringDhaka_2026, requires vendors to submit detailed price quotations covering a wide array of food items including hamburgers, various sandwiches, pizzas in multiple sizes and varieties, fish fingers, omelets, mini snacks like singara and spring rolls, fruit and garden salads, and bottled water, among other menu options. Vendors must also include pricing for essential supplementary supplies such as napkins and tablecloths, along with applicable taxes and service charges. All services must be performed at the embassy's location in Dhaka, Bangladesh, and proposals must meet or exceed the listed minimum requirements without being limited to them. The contract falls under NAICS code 311 and is not set aside for any specific business category. Interested parties should direct inquiries to Iftekhar Ahmed at Ahmedix2@State.Gov and submit responses through the official SAM.gov portal before the deadline.

POSTED

12 days ago

DEADLINE

in 3 days
View Details