Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Command and Control (C2) Capability Prototype (C2 Capability) | Project No. 26-08

Active

44145Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense has issued solicitation number 44145 for the Command and Control (C2) Capability Prototype, identified as Project No. 26-08. This federal opportunity was posted on April 16, 2026, and is managed through the National Security Technology Accelerator (NSTXL). The project focuses on developing C2 capability prototypes to enhance operational command and control functions. Interested parties can find further details and application requirements through the official NSTXL portal.

General Info

DoD solicitation 44145 for Project 26-08 C2 capability prototypes via NSTXL.

Agency

Department Of Defense

NAICS

928110 - National Security

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSolicitation

PostedApr 16

Solicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

SpEC: Oops! Looks like you have reached a member only page. If you are already an NSTXL member, login to view the page. Not a member? Apply today !

Similar Contracts

Same NAICS industry code

RFB-IS-27200239 - 1091153 - NETAPP A400 STORAGE ARRAY DATA ERASURES - Closing: 10/21/2026 12:00 PM

Solicitation # 232424

Los Angeles County

POSTED

about 14 hours ago

DEADLINE

MIL-DTL-46604C, Thruster, Cartridge Actuated, M13 Assembly

Solicitation # N0002426SN-68

The Naval Sea Systems Command is developing draft specifications and standards for the MIL-DTL-46604C, Thruster, Cartridge Actuated, M13 Assembly. The goal of this initiative is to support a diverse range of design solutions and processes while encouraging a broad vendor base. This action is a special notice and does not constitute a solicitation for bids. Interested U.S. Government agencies and their contractors may request copies of the document by emailing CommandStandards@navy.mil. Foreign entities must provide a valid need-to-know and an export license agreement to receive the materials. The review period for this document concludes on October 30, 2026, after which the final version will be available via ASSIST Online.

POSTED

DEADLINE

New 52 | Project 26-20

Solicitation # 45192

The Department of Defense has issued a solicitation titled New 52 | Project 26-20 under solicitation number 45192. This federal opportunity was posted on September 29, 2026, and is managed through the National Security Technology Accelerator. Further details regarding the specific scope of work, NAICS codes, and set-aside designations are not provided in the available data. Interested parties are directed to the NSTXL portal for complete access to the project requirements and application process.

Department Of Defense

POSTED

DEADLINE

MIL-DTL-60286D, Initiator, Cartridge Actuated, M53 Assembly

Solicitation # N0002426SN-67

The Naval Sea Systems Command (NAVSEA) is developing draft specifications and standards for the MIL-DTL-60286D, Initiator, Cartridge Actuated, M53 Assembly. The objective is to create standards that support various design solutions and processes to encourage a broad vendor base. This action is a special notice and not a formal solicitation. Interested parties may request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 26, 2026, and the final version will be available via ASSIST Online. This initiative is managed by Navsea HQ under the Department of Defense.

POSTED

DEADLINE

MIL-DTL-60680B, Thruster, Cartridge Actuated, M16 Remanufactured Metal Parts Assembly

Solicitation # N0002426SN-61

The Naval Sea Systems Command is developing draft specifications and standards for MIL-DTL-60680B, which pertains to the M16 Remanufactured Metal Parts Assembly for cartridge actuated thrusters. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the draft document by emailing CommandStandards@navy.mil. The review period for this document concludes on October 19, 2026, and the final version will be available via ASSIST Online. This notice is for informational purposes and does not constitute a formal solicitation.

POSTED

DEADLINE

MIL-DTL-46559D, Initiator, Cartridge Actuated, M3A2, Metal Parts Assembly

Solicitation # N0002426SN-65

The Naval Sea Systems Command is developing draft specifications and standards for the MIL-DTL-46559D Initiator, Cartridge Actuated, M3A2, Metal Parts Assembly. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the document by emailing CommandStandards@navy.mil with the specific document number. This notice is not a solicitation, but rather a call for review. The review period concludes on October 23, 2026, and the final document will be available via ASSIST Online. The action is managed by Navsea HQ under the Department of Defense, with the associated NAICS code 928110.

POSTED

DEADLINE

LIPTM00183, INIS IPT, MUOS - New Task Order (#5)The Naval Information Warfare Systems agency, specifically Niwc Atlantic, has issued a forecast for a new task order identified as LIPTM00183, INIS IPT, MUOS Task Order 5. This procurement falls under NAICS code 928110 and is scheduled for posting on September 27, 2026. The primary place of performance for this contract is located in Charleston. Administrative oversight for this requirement is managed by Contracting Officer Giancarlo Dumenigo, with Kristopher Garris serving as the secondary point of contact. Further details regarding the long range acquisition estimate can be accessed through the official NAVWAR portal.

POSTED

DEADLINE

WAMS TO # 7 - MEO DevelopmentThe WAMS TO 7 - MEO Development is a forecast opportunity issued by the Naval Information Warfare Systems. This project is categorized under NAICS code 928110 and is slated for performance in San Diego. The primary point of contact for this requirement is Contracting Officer Christopher Murr, with Blake Erickson serving as the secondary contact. Further details regarding this acquisition can be found through the Naval Information Warfare Systems official documentation.

Naval Information Warfare Systems

POSTED

DEADLINE

LIPTM00174, Air & Space IPT, ITI NEW ORDER, TO-2The LIPTM00174 forecast involves the transfer of efforts from TO-1 along with ongoing sustainment for the Air and Space IPT. Managed by the Naval Information Warfare Systems under Niwc Atlantic, this ITI new order is categorized under NAICS code 928110 and is slated for performance in Charleston. The procurement process is overseen by Contracting Officer Giancarlo Dumenigo and Secondary Point of Contact Catharine Teeple. This action is currently listed as a forecast with a posted date of September 27, 2026.

POSTED

DEADLINE

MIL-DTL-32113B, Initiator, Cartridge Actuated, JAU-74/A

Solicitation # N0002426SN-60

The Naval Sea Systems Command is developing draft specifications and standards for the MIL-DTL-32113B, Initiator, Cartridge Actuated, JAU-74/A. This initiative aims to support a diverse range of design solutions and processes while encouraging a broad vendor base. Interested parties can request copies of the document by emailing CommandStandards@navy.mil with the document number. This notice is not a solicitation, but it provides an opportunity for review before the period ends on October 16, 2026. The final document will be available via ASSIST Online upon completion. The project is managed by Navsea HQ within the Department of Defense, falling under NAICS code 928110.

POSTED

DEADLINE

LIPTM00085; MST MUL USMC ESS FY25 Period 3 (C)The MST MUL USMC ESS FY25 Period 3 contract, identified as LIPTM00085, is a forecast opportunity issued by the Naval Information Warfare Systems Command under Niwc Atlantic. This requirement falls under NAICS code 928110 and is designated for performance in Charleston. The primary point of contact for this action is Contracting Officer Christopher M. Brown, with Candia Lee serving as the secondary contact. This procurement is part of a long range acquisition estimate for the fiscal year 2025 period.

POSTED

DEADLINE

LIPTM00448-PNT ISEA, New Task Order Award under contract N6523620D8024-CharlesNwachukwu0011-(WR Systems-New TO)This forecast outlines a new task order award for ISEA support under the C4I framework, issued under the existing contract N6523620D8024. The project is managed by the Naval Information Warfare Systems through the Niwc Atlantic agency and is designated for performance in Norfolk. The procurement falls under NAICS code 928110 and is associated with WR Systems. Martha Leya serves as the primary Contracting Officer, with Kari Hill acting as the secondary point of contact. The award is scheduled for posting on September 27, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense

Same awarding agency

Fuel System RelocationThis subcontract for the Department of Defense involves the relocation of the Pumphouse 3 Truck Fill Stand to support USACE Alaska District projects. The scope of work includes the decommissioning, moving, and re-installation of the fuel fill stand to make room for a new Passenger Shed, with the ultimate goal of delivering a fully operational system. Due to the nature of the work, the contractor must possess specialized certification for the handling and installation of fuel systems. The project is categorized under NAICS code 238220, with a response deadline set for October 21, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Material Handling Equipment SupplierThis subcontract opportunity is for a Material Handling Equipment Supplier to support prime contractors on USACE Alaska District projects for the Department of Defense. The selected provider will be responsible for the supply and installation of specialized warehouse equipment, specifically a rollerized scale designed for a three-pallet train and 463L pallet storage racks. A critical requirement of this contract is the ability to meet strict military specifications for 463L pallet handling. The project is located in Alaska, zip code 99506, and falls under NAICS code 333998. Interested parties must submit their responses by the deadline of October 21, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Paving, Drainage & Exterior ImprovementsThis subcontract opportunity with the Department of Defense involves performing site improvements for prime contractors on USACE Alaska District projects. The scope of work includes laying asphalt and concrete for vehicle parking and drive-through lanes, installing storm drainage systems, and implementing perimeter fencing and signage to ensure completed site access and security. Due to the geographic location, the project requires specialized experience with permafrost soil conditions and cold-weather paving techniques. Interested parties should note the response deadline of October 21, 2026, for this project categorized under NAICS code 237310.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Industrial Electrical & Power DistributionThis subcontract opportunity with the Department of Defense involves the installation of industrial electrical systems and high-voltage power for prime contractors operating within the USACE Alaska District. The scope of work focuses on delivering fully powered facility electrical distribution, specifically including 480V power for forklift chargers, exterior lighting, and power distribution systems for a warehouse and the Operations Control Center. Qualified bidders must be licensed electrical contractors with demonstrated experience working in industrial military facilities. The project falls under NAICS code 238210, with a response deadline set for October 21, 2026. Performance will take place in Alaska, zip code 99506.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Secure Communications & Cybersecurity IntegrationThe Secure Communications and Cybersecurity Integration subcontract involves the installation and configuration of NIPR and SIPR connectivity and cybersecurity platforms for prime contractors supporting USACE Alaska District projects. The scope of work includes performing essential cabling and hardware installation for secure networks and implementing cybersecurity measures across four specific platforms to ensure the delivery of certified secure network connectivity. Managed under the Department of Defense, this effort requires specialized personnel who possess the necessary security clearances and professional cybersecurity certifications. Interested parties should note the response deadline of October 21, 2026, for this technical integration project located in Alaska.

Computer Systems Design Services

POSTED

DEADLINE

Cold Climate HVAC & Mechanical SystemsThis subcontract opportunity, titled Cold Climate HVAC & Mechanical Systems, involves the installation of self-contained heating, ventilation, and air conditioning systems for prime contractors working on USACE Alaska District projects. The scope of work focuses on delivering fully commissioned heating and cooling systems for administrative and warehouse spaces designed for 24-hour operations within Climate Zone 7. Managed under the Department of Defense with NAICS code 238220, the project requires specialized experience with Arctic-grade HVAC equipment and a commitment to energy sustainability. Interested parties must submit their responses by October 21, 2026, for performance in Alaska.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Industrial Flooring & Wash Rack SystemsThis subcontract opportunity involves the installation of an indoor vehicle wash rack and comprehensive water management systems for prime contractors operating on USACE Alaska District projects. The scope of work includes the installation of heavy-duty industrial flooring, vehicle inspection lanes, and a specialized oil-water separator system. The successful contractor must possess specific expertise in environmental regulations regarding oil-water separation to ensure the delivery of a fully operational facility. Managed under the Department of Defense with NAICS code 238220, the project is located in Alaska. Interested parties must submit their responses by October 21, 2026. The primary objective is to provide a complete, compliant industrial wash rack system that meets all technical and environmental specifications.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Site Remediation & EarthworkThis subcontract for Site Remediation and Earthwork involves performing soil remediation and site preparation for prime contractors on USACE Alaska District projects at the JBR044 site. The scope of work includes the excavation, removal, and disposal of contaminated soil, as well as grading and site leveling specifically for the RDF complex to deliver a certified clean and prepared building pad. Managed under the Department of Defense with NAICS code 562910, the project requires specialized hazardous material handling certifications. The solicitation was posted on October 7, 2026, with a response deadline of October 21, 2026, for performance at the designated site in Alaska.

Remediation Services

POSTED

DEADLINE

Cold Climate Architectural Design & EngineeringThe Cold Climate Architectural Design and Engineering subcontract involves providing comprehensive design and engineering services for two facilities supporting prime contractors on USACE Alaska District projects. The scope of work focuses on adapting Army Standard Designs for Climate Zone 7, which requires specialized site planning, architectural drafting, and structural engineering capable of withstanding extreme snow and wind loads. Additionally, the project necessitates the integration of NIPR/SIPR and cybersecurity requirements to ensure secure communications infrastructure. Managed under the Department of Defense with NAICS code 541330, the contract requires the delivery of complete final design packages, including detailed blueprints and technical specifications. The performance of these services is centered in Alaska, specifically within the 99506 zip code area. Interested parties must adhere to the response deadline of October 21, 2026.

Engineering Services

POSTED

DEADLINE

Industry Day: Vandenberg Space Force Base (VSFB) Various Spaceport of the Future (SOTF) and Sentinel Projects - Progressive Design-Build (PDB) and Construction Management at Risk (CMAR) using Other Transaction Authority (OTA)

Solicitation # W912PL26QA007

The U.S. Army Corps of Engineers, Los Angeles District, is conducting market research and intelligence for several military construction projects at Vandenberg Space Force Base, California, with a total estimated magnitude of 375 million dollars. These projects will be executed using Other Transaction Authority under 10 U.S.C. 2808a and will be divided into three separate agreements: one Progressive Design-Build agreement for telecommunications, road infrastructure to Space Launch Complex 5, and the South Base Entry Control Facility; one Progressive Design-Build agreement for a Consolidated Air Traffic Control Tower, Fire Station, and Base Operations facility; and one Construction Manager at Risk agreement for the Sentinel Re-Entry Vehicle Facility. The work encompasses comprehensive infrastructure modernizations, including floor-to-ceiling renovations, new administrative spaces, and horizontal improvements to roads and utilities. The Sentinel Re-Entry Vehicle Facility specifically requires the construction of a 12,400-square-foot single-story facility featuring blast walls, calibration bays, and 5-ton cranes. This facility must adhere to strict security and technical standards, including Intelligence Community Directive 705 for secure storage and TEMPEST/RF shielding. The government intends to use a streamlined competitive selection process involving the submission of white papers followed by pitch meetings to select the most qualified candidates. Interested firms under NAICS code 236220 are encouraged to participate in the Industry Day scheduled for October 22, 2026, to gain insight into the acquisition strategy and requirements.

Commercial and Institutional Building Construction

POSTED

DEADLINE

JBR041 – Pallet Processing Facility/JBR044 – Rapid Deployment Facility

Solicitation # W911KB29RWP01

The Department of Defense, through the U.S. Army Corps of Engineers Alaska District, is conducting a sources sought effort for the design and construction of two facilities at JBER-Richardson, Alaska. The project includes the Pallet Processing Facility (JBR041), a 52,000 square foot all-weather facility serving as the sole hazardous cargo processing and consolidated alert preparation point, and the Rapid Deployment Facility (JBR044), a complex supporting pre-deployment and redeployment activities for a Brigade Combat Team (Airborne). The combined estimated value for these projects is approximately 182.5 million dollars, with a planned period of performance spanning fiscal years 2029 through 2032. Design is slated to begin in the first quarter of FY29, followed by a 24-month construction period starting in FY30. Due to the location in Climate Zone 7, the project requires specialized expertise in cold climate design practices. Key technical requirements include NIPR and SIPR connectivity for JBR041, cybersecurity for four platforms, and the management of known soil contamination at the JBR044 site. The Pallet Processing Facility will feature an Operations Control Center, a passenger shed for ammunition and ration issue, and a Joint Inspection Facility with vehicle inspection lanes and an indoor wash rack. The government is currently seeking industry input on the optimal project delivery method, considering options such as Construction Manager at Risk, Design-Build to Budget, or Progressive Design-Build.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Army Contracting Command – Red River Army Depot (ACC-RRAD) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)

Solicitation # W911RQ-27-S-C001

The Army Contracting Command – Red River Army Depot (ACC-RRAD) has issued Commercial Solutions Opening (CSO) solicitation W911RQ-27-S-C001 to modernize the Organic Industrial Base (OIB). This initiative focuses on Convergent Manufacturing, targeting advancements in agile facilities, connected digital enterprises, advanced manufacturing, digital twins, automation, and cybersecurity. The CSO utilizes a streamlined acquisition process authorized by DFARS Subpart 212-70 and FAR Part 12, allowing the Department of Defense to competitively procure innovative commercial items, technologies, and services from both traditional and non-traditional defense contractors. The general solicitation remains open until September 30, 2027, with awards typically taking the form of fixed-price contracts. The procurement is executed through specific Areas of Interest (AoIs), such as the acquisition of maneuverable micro trucks for logistics and the implementation of turnkey lease and maintenance solutions for industrial parts washers. The evaluation process is multi-phased, beginning with a solution brief focused on responsiveness and technical merit, followed by a presentation or pitch to assess feasibility and risk, and concluding with a full Commercial Solution Proposal (CSP) evaluated for technical approach, schedule, and price reasonableness. All respondents must be registered in the System for Award Management (SAM) and possess a Unique Entity ID. Specific requirements for certain AoIs include EPA compliance for solvent reclamation and significant environmental liability insurance coverage.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS