Commercial Diesel Generator Set, 600kW Standby 60Hz

The contract is for a 600kW diesel generator set designed for standby power applications, operating at 60Hz with a 277/480-volt, three-phase, wye, four-wire output. The unit features a steel sound-attenuated Level 2 enclosure in green, equipped with a horizontal air outlet and louvers controlled by 24-volt DC spring-closed, motor-operated mechanisms. It includes a 2400-gallon subbase fuel tank compliant with UL142 and ULC S601-07 standards, dual stub-up fuel connections, a fuel water separator, and a high fuel fill alarm. The genset is powered by a diesel engine with a normal duty air cleaner, 50°C ambient radiator cooling, low coolant shutdown, and a coolant heater rated for 208/240/480 volts AC, active below 40°F. It is equipped with a Power Command 2.3 controller featuring an LCD display in English, an externally mounted emergency stop switch, and auxiliary signals with eight inputs and eight outputs. The electrical distribution includes a 1200A, three-pole circuit breaker on the right side with top and bottom entries, a terminal box on the right for low voltage, and a 12-amp regulated external battery charger. The alternator is rated for 60Hz, 480 volts, 105°C standby, with an alternator heater included. Emissions meet EPA Tier 2 and NSPS CI Stationary Emergency standards and the unit is listed under UL 2200. The generator is base-mounted, includes OTECD and OTEC transfer switch with electronic control, and comes with English literature and no packaging. This contract is a total small business set-aside under FAR 19.5, identified under NAICS code 335312, and issued by the Department of Defense through the Office of W6QM Micc-Ft Drum in Fort Drum, New York. The solicitation number is W911S226U3180, posted on May 7, 2026, with responses due by May 13, 2026. The place of performance is 13602, and the point of contact is Carrie Lawton, reachable at carrie.l.lawton.civ@army.mil