Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Commercial Ice Cream Freezer Supply and Delivery

Active

State & Local

Response Deadline08/03/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement and delivery of a commercial-grade ice cream freezer featuring a multi-flavor display and an integrated storage compartment, designed to be installation-ready for immediate use in a commercial setting. The equipment must meet industry standards for durability, temperature control, and hygiene, ensuring consistent product quality and operational efficiency in high-volume environments. The supplier is responsible for ensuring the unit is fully functional, properly packaged, and delivered to the designated location without delay. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 333415, which pertains to commercial and industrial machinery and equipment manufacturing. The contracting entity is the State of Utah, though specific details about the performing location, point of contact, or set-aside provisions are not provided. Interested parties must submit responses through the designated online platform prior to the deadline, as no further instructions or requirements are outlined in the available data.

General Info

Procurement of commercial-grade multi-flavor ice cream freezer for Utah, delivery by August 3, 2026.

Agency

UtahView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 06:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of a commercial-grade ice cream freezer with multi-flavor display and integrated storage compartment, ready for installation.

Similar Contracts

Same NAICS industry code

41--FLEXIBLE DUCTThe solicitation is for 100 units of flexible duct with NIIN 016645640 and part number CS9018-01-360-2, issued by the Navsup Weapon Systems Support under the Department of Defense. Responses must be submitted via email to christopher.campellone.civ@us.navy.mil by the deadline of August 24, 2026, at 8:30 PM Eastern Time, and early or incremental deliveries are preferred. Only approved sources may be awarded; non-approved vendors must submit full documentation as outlined in the NAVSUP WSS Source Approval Brochure available online, or their proposals will be rejected. Government source approval is mandatory prior to award, and failure to meet this requirement may result in the requirement being delayed or reassigned based on fleet support needs. The contract is classified under NAICS code 333415 and includes mandatory compliance with federal regulations, including Buy American provisions, security prohibitions, equal opportunity for workers with disabilities, warranty coverage of 12 months with a 60-day defect discovery window, and the mandatory use of Workflow Pro’s Assist Module. Payment instructions and invoice processing follow the Wide Area Workflow system, and royalty obligations, national defense priority ratings, and annual certifications are all applicable. The place of performance and delivery details are unspecified, but the contracting office is located in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month

COMPRESSOR,REFRIGERThe contract pertains to the repair of a COMPRESSOR, REFRIGER under solicitation N0010426QLC29, with a required Repair Turnaround Time (RTAT) of 180 days measured from physical receipt of the asset at the contractor’s facility, as logged in the Commercial Asset Visibility (CAV) system. The work must comply with technical specifications, manufacturer documentation, and MIL-STD-130 for marking, and all repairs are subject to Government Source Inspection (GSI). The contract is firm-fixed-price, with no additional cost for accelerated delivery, and freight is FOB Origin, handled by Navy CAV or Proxy CAV. Failure to meet the RTAT results in a per-unit, per-month price reduction, capped at a specified maximum, without precluding other remedies such as default termination. Contractors must confirm their ability to meet the 180-day RTAT or explain capacity constraints, and must provide unit and total pricing, along with comparative new unit pricing and lead time. The contract incorporates mandatory clauses including Buy American Act compliance, cybersecurity maturity model certification requirements, small business subcontracting obligations, and security prohibitions under recent deviations. Contractors must be authorized distributors of the original manufacturer and provide proof of authorization. All documentation, including technical manuals and specifications, must be obtained through designated Navy sources, and distribution of provided materials is governed by specific DOD distribution statements. Records of inspections and testing must be retained for 365 days post-final delivery. The awardee’s CAGE code, inspection location, and any subcontractor facilities must be indicated. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer using designated code system classifications. The Government retains full inspection rights, and nonconforming items, including those determined beyond economical repair (BER), may trigger negotiated price adjustments up to an NTE ceiling. All submissions must be made by the deadline of July 27, 2026, to the designated point of contact.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

4110--Blast ChillerThe Department of Veterans Affairs is soliciting quotes under solicitation number 36C25626Q1086 for a 4110–Blast Chiller under a combined synopsis/solicitation formatted per FAR Part 12, utilizing simplified acquisition procedures. This action is exclusively set aside for service-disabled veteran-owned small businesses, with the NAICS code 333415 applicable to the manufacture of air-conditioning and heating equipment. The contract encompasses the full lifecycle of the equipment including supply, installation, de-installation, transportation, in-service support, and testing, with all items required to meet the salient characteristics and functional specifications detailed in the accompanying statement of work. All responses must be submitted electronically via email to Marcus.Sidney@va.gov no later than 8:00 a.m. Central Time on August 12th, 2026, with no phone submissions or paper quotes accepted. Questions and inquiries must also be submitted via email by 8:00 a.m. Central Time on August 7th, 2026, and only official communications received directly from the requester will be acknowledged. The point of contact for this procurement is Contract Specialist Marcus Sidney, and all correspondence must adhere to the electronic submission requirement outlined in the solicitation, with applicable provisions and clauses current as of FAC 2026-01.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 12 hours ago

DEADLINE

Chilled & Hot Water Piping Interconnection Works in American Embassy, New DelhiThe U.S. Embassy in New Delhi is seeking quotations for chilled and hot water piping interconnection works between the existing plantroom and the new SPX building, identified under solicitation number 191N6526Q0095. The project is located at the embassy compound in Chanakyapuri, New Delhi, with all work required to be performed on-site. Interested parties must confirm their attendance for a mandatory site visit on August 5, 2026, by 5:00 p.m. on August 1, 2026, and must submit any requests for clarification via email by 2:00 p.m. on August 6, 2026. Quotations are due no later than 2:00 p.m. India Time on August 11, 2026, and must be submitted electronically to Newdelhibids@state.gov with a specific subject line; submissions exceeding 10MB must be split into smaller files. All proposals must be in English and fully complete, including pricing, representations and certifications, and additional requirements outlined in Section J of the solicitation. Failure to comply with submission guidelines will result in rejection. Offerors must be currently registered in the System for Award Management (SAM) prior to submitting a quotation, and those not registered must complete registration within 30 days of award or three days before the first invoice, whichever comes first. The U.S. Government will award the contract to the responsible offeror submitting the lowest-priced acceptable proposal, with no set-aside provisions. Proposals must include proof of SAM registration and all mandatory documentation as specified in Sections A, L, and J. The contracting office is part of the U.S. Department of State, with primary point of contact Chaitanya Sharma and secondary contact Rajender available via state.gov email addresses for inquiries. The NAICS code for this procurement is 333415, indicating mechanical equipment manufacturing services relevant to the scope of work.

US Embassy New Delhi

POSTED

about 12 hours ago

DEADLINE

Utah Tech University - Ice Cream FreezerUtah Tech University is soliciting bids for the procurement of an ice cream freezer to support campus food service operations, ensuring reliable storage of frozen products that meet the institution’s operational, capacity, and performance standards. The solicitation, identified by number 27-0722, was posted on July 23, 2026, with responses due by August 3, 2026, at 6:00 PM MT. The equipment must be capable of sustaining the demands of university dining services while maintaining consistent freezing conditions for ice cream and related frozen items. The procurement is open to qualified vendors and will be fulfilled at the university’s location in Utah, with no specific set-aside or NAICS code indicated. All inquiries and submissions must be made through the official Bonfire Hub portal linked in the posting.

POSTED

DEADLINE

Cooling Coil Manufacturing and Supply (NSN 4130-01-681-8469)The contract entails the manufacture and supply of one Cooling Coil, Air, DU with part number 2504-0000 and National Stock Number 4130-01-681-8469, fully compliant with all technical, packaging, marking, and delivery standards set by the Defense Logistics Agency. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 333415, identifying it as a manufacturing activity related to HVAC and commercial refrigeration equipment. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and performance is to be carried out at Mechanicstown, Pennsylvania, with a ZIP code of 17050-2411. The contracting agency is the Department of Defense under the Construction & Equipment MRO SVC I office, and all deliverables must adhere strictly to DLA requirements to ensure full military specification compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

DUCT ASSEMBLY, AIR CONDITIONING-HEATING, AThe contract is for the procurement of 40 units of DUCT ASSEMBLY, AIR CONDITIONING-HEATING, A (NSN 1660-00-221-1176) under an Indefinite Quantity Contract (IDIQ) awarded through a sealed bid process, with a maximum potential value of $4,999,999.99 and a minimum guaranteed delivery of 10 units per order. Delivery is required within 350 days after the issue of a delivery order, and the contract is governed by a firm-fixed-price structure. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, with specific mandates including DLA Packaging Requirements (RP001), Inspection and Acceptance at Origin (RQ009), Removal of Government Identification from Non-Accepted Supplies (RQ011), and Export Control of Technical Data (RQ032). The technical data involved is subject to ITAR or EAR regulations, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and compliance questionnaires, with DFARS 252.225-7048 fully applicable. Packaging and labeling must conform to MIL-STD-129 and ASTM D3951, with barcoding per QUP:001 standards. Quality assurance must comply with ISO 9001:2015, and inspections are conducted at origin with the government retaining final acceptance authority. The contract requires adherence to FAR and DFARS clauses including 52.246-2, 52.246-11, and 52.209-6, with deviations noted for certain subcontracting provisions. Cybersecurity obligations under DFARS 252.204-7012 and 7020 mandate NIST SP 800-171 compliance, cyber incident reporting within 72 hours, and submission of assessment results through SPRS. Invoicing is exclusively through WAWF, governed by FAR 252.232-7006, and payment is processed via DoDAAC. Evaluation for award is based on best value trade-off, with past performance—particularly SPRS assessments and historical quality and delivery data—considered significantly more important than other non-price factors, which are approximately equal in

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

FILTER ELEMENT, AIR CONThe contract specifies the procurement of four air conditioning filter elements with NSN 4130-01-723-8128 for delivery within 168 days of award, under solicitation SPE7M2-26-T-5734 issued by the Department of Defense’s Nuclear Reactor Program. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Export control regulations apply as the item contains technical data subject to ITAR or EAR, prohibiting disclosure to foreign persons without authorization from the Department of State or Commerce, with access restricted to contractors holding JCP certification, having completed required DLA training, and being approved to handle such data. Configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have all government identifiers removed. The point of contact for inquiries is David Larsen at david.larsen@dla.mil, with performance occurring in New Cumberland, PA 17070-5002.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

COOLING COIL, AIR, DUThe contract is for one cooling coil, air, du, identified by NSN 4130-01-681-8469 and part number 2504-0000, supplied by Engineered Coil Company under solicitation SPE8E9-26-T-3248, a total small business set-aside under NAICS code 333415. Delivery is required within 20 days of award, with FOB origin terms, and quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all items must be marked and labeled accordingly with no variance allowed in quantity. Inspection and acceptance occur at the destination, and shipment must be sent via traceable freight, explicitly prohibiting parcel post. The delivery address is the NAVSEA Logistics Center in Mechanicsburg, Pennsylvania, with a required original delivery date of June 15, 2026, and the point of contact is Matthew Kruc, with contract oversight handled by the Department of Defense. The item falls under the controlled category of covered defense information and requires compliance with all applicable source approval and documentation protocols.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHROUD, FAN, RADIATORThe contract pertains to the procurement of one unit of a SHROUD, FAN, RADIATOR with NSN 2930-01-509-4787 and purchase request number 7017589311, under solicitation SPE7L1-26-T-872K. Delivery is required within 20 days from the contract date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, where the item must be packaged per ASTM D3951 unless superseded by DLA Master List of Technical and Quality Requirements, which take precedence. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to RP001 DLA Packaging Requirements. Ozone-depleting chemicals are strictly prohibited in any component or process, and any substitute chemicals must be approved unless explicitly authorized by the specifications. The item is to be shipped by traceable freight methods, excluding parcel post, to the designated delivery point at Fort Eustis, Virginia, with the government-provided shipping label and reference codes W26RK4 and W6YN USALRCTR JB LANGLEY. The required delivery date is July 21, 2026, and the contract includes specific government-only tracking identifiers including IPD, DIC, and TCN. The item falls under NAICS code 333415, and the point of contact is Kristina Derry with the Department of Defense’s Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

DEADLINE

FAN, CIRCULATINGThe contract is for the procurement of 600 circulating fans with NSN 4140-00-255-7799 under solicitation SPE8E9-26-T-3246, with a delivery deadline of 128 days after award. The fans must operate on 115 volts, 60 cycles, single phase, and electrical wires connected to the motor must not contact any part of the pivot joint during operation. The frame, base, guard, and blades are required to be powder coated with finishes approved per MIL-PRF-24712, or if no qualified products are listed, then coatings from Table 631-8-15 of the Naval Ships Technical Manual Chapter 631 are acceptable, with surface preparation and application following manufacturer guidelines. The use of zinc chromate is prohibited and must be replaced. Mercury or mercury-containing compounds are strictly forbidden unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as specified by NAVSEA 5100-003D. The contract mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I codes, with applicable revisions determined by the solicitation or award date depending on acquisition size. Inspection and acceptance are to occur at origin, and non-accepted supplies must have government identification removed. First article inspection is required, and sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. Zero non-conformances are required in sampled lots unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Additionally, the product must meet CMMC Level 2 self-assessment cybersecurity requirements. The contracting office is the Department of Defense, Construction & Equipment MRO SVC I, with performance taking place in Tracy, CA, and primary point of contact Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

ROD, MEASURINGThe contract pertains to the procurement of a measuring rod assembly for fluid systems, identified by NSN 2930-15-120-2057 and part number 321840F91 from Isotta Fraschini Motori Spa, classified as a critical application item. Ten units are required to be delivered within five days of contract award under FOB origin terms, with no variance allowed in quantity. All supplies must comply with DLA packaging standards based on MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging methods, containment codes, and palletization requirements. The item must not contain intentionally added mercury or mercury compounds except in approved applications such as batteries, fluorescent lamps, sensors, or instrument controls, with any contained mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The delivery destination is the General Depot of Naval Supplies in Kaohsiung, Taiwan, with freight subject to DLA procedures. The contract is issued under solicitation SPE7L1-26-T-863U as a Total Small Business Set-Aside, with a response deadline of August 3, 2026, and the original required delivery date is July 27, 2026. Technical and quality requirements referenced are governed by the DLA Master List, and the unit of issue is EA, aligned with ANSI X12 standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Utah

Same awarding agency

Project Inspection, Compliance & Quality AssuranceThe contract pertains to third-party inspection and compliance verification services for projects requiring adherence to the Americans with Disabilities Act, Section 508 of the Rehabilitation Act, the National Electrical Code, and specific university standards. The scope includes systematic assessments to ensure that all facilities and systems meet accessibility, safety, and regulatory requirements, with detailed reporting provided to document findings and confirm compliance. The work is expected to involve field inspections, documentation reviews, and ongoing coordination to address deficiencies and verify corrective actions as needed. This subcontract opportunity is issued by the State of Utah under NAICS code 541330, which classifies it as architectural and engineering services, and is open for responses until August 13, 2026. The solicitation was posted on July 23, 2026, and no set-aside provisions have been designated. While the exact location of performance and point of contact details are not specified, the work is intended to support infrastructure or facility initiatives governed by Utah’s institutional and regulatory frameworks. Interested parties must submit proposals through the provided Bonfire link prior to the deadline.

Engineering Services

POSTED

DEADLINE

Supply of Historical-Style Lighting FixturesThe contract seeks the supply of pre-approved historical-style street light fixtures, poles, luminaires, hardware, and smart control systems to meet specific design and functional requirements. All items must conform to approved historical aesthetics while integrating modern smart lighting technology for efficiency and municipal management. The work is structured as a subcontract under NAICS code 423610, indicating a focus on lighting equipment distribution and supply. The response deadline is August 13, 2026, and the opportunity is posted by the state of Utah, though no specific city or office address is provided. Performance location details are also unspecified, leaving the scope of deployment open to the contractor’s proposal. The contract does not indicate any set-aside criteria or specific eligibility requirements beyond standard subcontracting standards. All proposals must align with the technical specifications outlined in the solicitation for historical integrity and smart system compatibility.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Trenching, Conduit Installation & Foundation WorkThe contract pertains to trenching for underground conduit systems, installation of conduit networks, construction of concrete foundations for light poles, and comprehensive site restoration following work completion. All tasks must be performed in accordance with technical and safety standards to ensure proper function and longevity of the infrastructure. Work is to be carried out under a subcontract arrangement with a NAICS code of 237110, indicating classification under Utility System Construction. The opportunity was posted on July 23, 2026, and responses are due by August 13, 2026, at 6:00 PM. The contracting entity is the State of Utah, with performance expected to occur within its jurisdiction, though specific location details are not provided. No set-aside program or organization type designation is indicated, and all submissions must be made through the provided Utah BonfireHub link.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Electrical Installation of Historical Street LightingThe contract entails the full electrical installation of historically styled street lights, requiring comprehensive work such as mounting fixtures, running and connecting wiring, proper grounding, and seamless integration with existing municipal power systems. The installation must honor the aesthetic and architectural integrity of historical designs while meeting all current electrical codes and safety standards. Work is to be performed in Utah, though specific locations are not detailed, and the project is structured as a subcontract opportunity under NAICS code 238210, which pertains to electrical contracting services. Proposals must be submitted by August 13, 2026, by 6:00 PM, with the solicitation posted on July 23, 2026. There is no set-aside designation or additional description provided for small business preferences. The agency responsible is the State of Utah, and the opportunity is accessible through the BonfireHub platform. Contractors are expected to coordinate with existing infrastructure and ensure compliance with all technical and operational requirements without disruption to public utilities or historical preservation guidelines.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Compliance and Administrative Support (Non-Technical)This contract provides administrative support services focused on E-Verify enrollment, insurance documentation, and adherence to Utah state data privacy and contracting regulations. The work is non-technical in nature and centers on ensuring compliance with state-specific requirements, particularly around the handling of sensitive data and proper documentation for workforce verification and insurance compliance. The subcontract is open to qualified vendors who can deliver timely and accurate administrative functions to support state agency operations without involving technical or IT system development. The opportunity was posted on July 23, 2026, with a response deadline of August 3, 2026, and is classified under NAICS code 541219 for other accounting services. The contracting entity is the state of Utah, with performance expected to align with Utah’s regulatory framework, though no specific location is designated. Bidders must demonstrate capability in managing compliance workflows, maintaining documentation integrity, and interfacing with state systems related to privacy and verification protocols. No set-aside provisions or organization type restrictions are specified, making it open to eligible subcontractors meeting the stated administrative requirements.

Other Accounting Services

POSTED

DEADLINE

Freight and Logistics ServicesThe contract involves the secure transportation and delivery of a freezer from its supplier or warehouse location to Utah Tech University, requiring full coordination of freight and logistics services to ensure safe handling and timely arrival. The work falls under NAICS code 484220, classifying it as a specialized freight transportation subcontract, and is open for responses until August 3, 2026, with bids submitted through the BonfireHub platform. Performance is solely targeted at the university’s location, and all parties must adhere to protocols that guarantee the integrity of the equipment during transit, including proper securing, climate control if necessary, and documented delivery confirmation. The solicitation is issued under the Utah agency, with no set-aside provisions or specific organizational requirements indicated, and interested contractors must complete all logistics planning and execution to meet the university’s operational needs.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

On-Site Installation and Setup ServicesThe contract outlines the on-site installation and setup services for a commercial ice cream freezer, requiring full mechanical installation, precise leveling, proper electrical connection, and comprehensive operational verification to ensure the unit functions correctly under real-world conditions. All work must be performed at the designated location, with no allowance for pre-assembly or remote testing, and the successful bidder must demonstrate technical competence in handling commercial refrigeration equipment and adhering to safety and performance standards. The solicitation is classified as a subcontract under NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors and was posted on July 23, 2026, with responses due by August 3, 2026, at 6:00 PM. The contracting agency is the State of Utah, with no further details provided regarding set-aside status, point of contact, or specific performance location beyond the state level. Interested parties must submit proposals through the provided Utah Bonfire Hub portal before the deadline to be considered for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Utah Tech University - 700 E Street Light ProjectUtah Tech University is soliciting bids for the installation of historical street lighting along the 700 East corridor in St. George, Utah, requiring electrical and civil construction contractors to provide all necessary labor, materials, equipment, and services. The project aims to enhance the corridor’s aesthetic and functional qualities with historically accurate lighting fixtures, and all qualified contractors are eligible to submit proposals. Bidders who hold an active Utah State Cooperative Contract for Electrical or Construction Services may receive evaluation preference, and those individuals are strongly encouraged to include their State Master Agreement contract number with their submission to ensure proper consideration. The solicitation, numbered 27-003, was posted on July 23, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM Mountain Time. The work will take place in St. George, Utah, and all bids must be submitted through the designated online portal.

Framing Contractors

POSTED

DEADLINE

Accessory Procurement and IntegrationThe contract pertains to the procurement and integration of one complimentary NETZSCH accessory, which may be either an automation module or an advanced software license, with the option to include additional accessories beyond the initial offering. This subcontract is solicited under the NAICS code 334511, indicating activity within the analytical instrument manufacturing sector, and is issued by the state of Utah through its designated agency office. Interested parties must respond by the deadline of August 4, 2026, at 4:00 PM, with the opportunity posted on July 23, 2026. While no specific point of contact or detailed location information is provided, the procurement is accessible via a public online portal linked to the Utah contracting platform. The agreement supports the integration of technical enhancements to existing equipment, aimed at improving operational efficiency or data analysis capabilities through NETZSCH's proprietary solutions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Consumables Supply with Discount ProgramThe contract pertains to the supply of consumables essential for thermal analysis testing, including crucibles, sensors, sample holders, and calibration standards, with a mandatory 15% discount applied to all items except high-temperature graphite and ceramic components, which are excluded from the discount. The solicitation is structured as a subcontract and falls under the NAICS code 423490, indicating a focus on wholesale trade of miscellaneous durable goods. The opportunity was posted on July 23, 2026, with a firm response deadline of August 4, 2026, at 4:00 PM, requiring vendors to submit proposals within this timeframe. The contracting entity is the State of Utah, though specific office details and point of contact information are not provided. The place of performance and delivery specifics are also unspecified in the provided data, leaving implementation logistics to be determined by the selected vendor. All submissions must be made through the designated portal at the provided hyperlink.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

In-House Repair and Refurbishment of Instrument ComponentsThe contract seeks qualified vendors to perform in-house repair, refurbishment, or remanufacturing of failed instrument modules including balance systems, load cells, and DSC sensors, all to meet original equipment manufacturer specifications. Work must be completed to ensure restored components function as intended, with quality standards aligned to the OEM’s original design and performance benchmarks. This subcontract opportunity is open to vendors capable of handling precision instrumentation repair with the technical expertise and facilities required to restore high-sensitivity components without compromising integrity or accuracy. The solicitation was posted on July 23, 2026, with responses required by August 4, 2026, at 4:00 PM. The North American Industry Classification System code is 811212, indicating the focus is on commercial and industrial machinery and equipment repair and maintenance. The contract is issued under the auspices of the Utah agency, though specific location details such as city, state, or address are not provided. Bidders must be prepared to meet all technical requirements outlined by the agency and deliver components that are fully functional, fully documented, and traceable to OEM standards to ensure long-term reliability and compliance.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE