Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Commercial Part Supply – Steering Wheel Manufacturing and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply and delivery of commercial steering wheels under an indefinite-delivery/indefinite-quantity arrangement, requiring manufacturers to fulfill subsequent delivery orders as needed by the Defense Logistics Agency. All items must comply with federal packaging standards and be shipped FOB Origin to designated DLA facilities, placing responsibility for transportation and risk on the supplier until the goods reach the delivery point. The North American Industry Classification System code 336320 indicates the work falls under automotive steering system manufacturing, aligning with the production of commercial-grade steering wheels for military use. The contract was posted in July 2026 and is structured as a subcontract, allowing qualified vendors to bid and compete for individual delivery orders under this overarching agreement. Performance is tied to DLA logistics centers across the United States, and while no specific place of performance or point of contact is listed, compliance with federal requirements and on-time delivery are central to contractual obligations.

General Info

Supply of commercial steering wheels under indefinite-quantity contract for DLA, FOB Origin, compliant with federal standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of commercial steering wheels per delivery orders under an IDIQ contract. Items must meet federal packaging standards and be delivered FOB Origin to DLA facilities.

Similar Contracts

Same NAICS industry code

Air Brake & Air System Component SupplyThe contract entails the supply and integration of critical air brake system components for commercial trucks, specifically the Bendix 4S/4M ABS, AD-IS air dryer, and heated moisture drain valve, all designed to enhance safety, reliability, and performance in air brake applications. These components must be fully compatible with existing truck air systems and installed to meet industry standards for durability and operational efficiency under demanding conditions. The work involves not only providing the specified parts but also ensuring seamless integration into the vehicle’s braking architecture to maintain optimal function and compliance with safety regulations. The solicitation is classified as a subcontract under NAICS code 336320, which pertains to automotive parts and accessories manufacturing, and is administered by the Mississippi Department of Finance and Administration through its MPTAP program. Responses are due by August 18, 2026, with the opportunity published on July 24, 2026. The place of performance and organizational details are not specified, indicating that the work may be performed at various locations consistent with the needs of the procurement. Contractors must meet all technical, delivery, and integration requirements without deviation, as the components are essential to the functionality and safety of commercial vehicle braking systems.

POSTED

DEADLINE

Heavy-Duty Axle and Drivetrain Component SupplyThe contract calls for the supply of front and rear axles designed to meet original equipment manufacturer load ratings for 88,000 GVW dump trucks, specifically requiring Meritor or Dana Spicer models with heavy-wall housing to ensure durability under extreme operational conditions. These components must be engineered to withstand the high torque and weight demands typical of heavy-duty dump truck applications, with strict adherence to OEM specifications for performance, safety, and reliability. The axles are intended for integration into commercial vocational vehicles operating in demanding environments, necessitating precision manufacturing and rigorous quality control. This is a subcontract under NAICS code 336320, awarded by the Mississippi Department of Finance and Administration through MPTAP, with a response deadline of August 18, 2026. The solicitation does not specify a set-aside classification, and the place of performance and point of contact details are not provided. Interested parties must submit proposals prior to the deadline, ensuring full compliance with technical and contractual requirements for axle specifications, delivery timelines, and quality assurance protocols. The opportunity is accessible via the Mississippi state contract portal for eligible suppliers seeking to provide critical drivetrain components to the commercial trucking and construction sectors.

POSTED

DEADLINE

Safety and Driver Assistance Systems SupplierThe contract seeks a small business to supply and integrate advanced safety and driver assistance systems including anti-lock braking systems, electronic stability control, airbags, tire pressure monitoring systems, and backup cameras for defense-related vehicle platforms. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only eligible small businesses may bid, in accordance with FAR 19.5 rules. The NAICS code 336320 classifies this as automotive safety system manufacturing, and the work must be performed at Fort Moore, Georgia, with a tight response deadline of August 4, 2026. The contracting activity is under the Department of Defense, specifically identified as FA4830 23 Cons Cc, though no point of contact or detailed address information is provided. All proposals must be submitted by the stated deadline to be considered for award, and the systems delivered must meet rigorous military-grade standards for reliability and performance under operational conditions.

FA4830 23 Cons Cc

POSTED

DEADLINE

Propeller Shaft with Universal Joint ManufacturingThe contract calls for the manufacturing of a propeller shaft assembly incorporating a universal joint, requiring precise machining, selection of defense-grade materials, dynamic balancing, and comprehensive quality testing to meet rigorous military mechanical standards. All components must be produced to ensure reliability, durability, and performance under extreme operational conditions typical of defense applications, with full traceability and documentation throughout the production process. The solicitation is classified as a subcontract under NAICS code 336320, issued by the Strategic Acquisition Program Directorate within the Department of Defense, with responses required by July 28, 2026. The work must be performed in compliance with federal defense procurement regulations, though specific performance location and point of contact details are not provided. Interested parties must submit proposals via the designated DIBBS portal before the deadline to be considered for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

UNIVERSAL JOINT, VEHICUThe contract is for the procurement of 69 vehicular universal joints with NSN 2520-01-045-3433 under solicitation SPE7L2-26-T-0575, with a response deadline of August 3, 2026, and a delivery requirement of 168 days after award. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Department of Commerce, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled data, and approved access through the DLA questionnaire may receive the technical data. The item falls under NAICS code 336320 and is managed by the Department of Defense’s Land Supplier Opns Wheeled Vehicles office, with performance located in New Cumberland, Pennsylvania. The primary point of contact is Shaun Sehgal, reachable via phone and email provided.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

PROPELLER SHAFT WITH UThe contract pertains to the procurement of a Propeller Shaft with Universal Joint, identified by NSN 2520-21-906-3918 and part number DP-1368 from Drive Products Inc, under solicitation SPE7LX-26-U-8720. It is structured as an Indefinite Delivery Contract (IDC) with an estimated annual quantity of 22 units, though no firm obligation exists until delivery orders are issued, and pricing details are not provided in the solicitation. Delivery is required within 81 days of order placement, with FOB Origin terms, and all shipments must comply with strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. The item is classified as controlled and sensitive, necessitating omission of the item description on all shipping labels per MIL-STD-129 Paragraph 5.4.1.6 and Code 40, with preservation using cooling/drying method 33, glass cloth wrapping, and jute cloth cushioning. The contract mandates adherence to DLA Packaging Requirements for Procurement, hazardous materials labeling under 29 CFR 1910.1200, and cybersecurity compliance through a CMMC Level 2 Self-Assessment. Inspection and acceptance occur at the destination, and invoicing must be conducted exclusively via Wide Area WorkFlow (WAWF). The solicitation incorporates numerous FAR and DFARS clauses covering equal opportunity, employment eligibility, trafficking in persons, sustainable products, cybersecurity, whistleblower rights, and disclosure of information, including requirements for NIST SP 800-171 DOD Assessment and the removal of government identification from non-accepted supplies. Offerors must provide a valid Unique Entity Identifier and CAGE code, and submit proposals exclusively through the DLA Internet Bid Board System by the deadline of July 28, 2026, with representations on small business status, socioeconomic certifications, and potential provision of covered defense telecommunications equipment required as part of the response.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

NOZZLE, WINDOW WASHEThe contract pertains to the procurement of two windshield washer nozzles, identified by NSN 2540-01-547-6705 and part number 246 069 006 006 G, with a unit price of $2.00 per unit and a total value of $4.00. Delivery is required within ten days of contract award, with shipment FOB origin and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all packaging must adhere to DLA’s packaging requirements, including MIL-STD-129 labeling and RP001 standards for palletization, superseding ASTM D3951 even for non-hazardous items. If the material is hazardous per FED-STD-313, it must be packaged under TQ requirement IP025. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated government freight address in Saint Charles, Missouri. The unit of issue is each, with two units ordered, and the contract references the DLA Master List of Technical and Quality Requirements as the governing source for all technical and quality clauses. The required delivery date is July 21, 2026, with a solicitation response deadline of August 3, 2026, issued under contract number SPE7L4-26-T-5809 by the Department of Defense for Combat Vehicles and Armament.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

GLOW PLUGThis contract specifies the procurement of glow plugs designated for use in Electric Power Plant III, with a total quantity of 17 units required under purchase request 7017601978 and NSN 2920-12-162-8099. The items must conform to exact part numbers from approved manufacturers including Bosch, BorgWarner Beru Systems, Deutz AG, and Tadano Faun, ensuring interchangeability and compliance with military-grade specifications. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, including palletization guidelines. Delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the items must be delivered within 168 days from contract award, with an original required delivery date of January 27, 2027, and a need ship date of January 19, 2027. The contract references critical application status, requiring strict adherence to identity removal protocols for non-accepted supplies, and mandates all packaging be marked and labeled per federal specifications. Shipments are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with transportation procedures governed by DLAD Proc Notes C19 and C20. The solicitation, issued under contract number SPE7L5-26-T-4617, was posted July 23, 2026, with responses due August 3, 2026, and falls under NAICS code 336320 for engine parts manufacturing. Primary point of contact is Randy Ith of the Department of Defense’s Land Supplier Opns Engines, and all units of issue align with DoD authorized standards as referenced in the official DLA unit of issue database.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

DISC, BRAKEThe contract is for the procurement of seven brake discs identified by NSN 3040-01-275-2511 under solicitation SPE7L1-26-T-867C, with a total small business set-aside classification and a NAICS code of 336320. Delivery is required within 168 days from award, and responses must be submitted by August 3, 2026. The solicitation incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with exceptions limited to specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as specified by NAVSEA 5100-003D. All items must be free of asbestos, and any replacement materials must receive formal approval under clause L30 and provision 4 conditions. Performance is designated for New Cumberland, Pennsylvania, with Troy Timmerman as the primary point of contact for post-award matters.

LAND SUPPLY CHAIN

POSTED

DEADLINE

ARM, WINDSHIELD WIPERThe contract pertains to the procurement of windshield wiper arms under solicitation SPE7L0-26-T-0382, with the NSN 2540-01-377-3125, and is designated as a total small business set-aside. It requires compliance with technical and quality standards referenced in the DLA Master List, including specific packaging and marking directives such as MIL-STD-2073-1E and MIL-STD-129, with palletization governed by DLA packaging requirements. The item is classified as a critical application, necessitating strict configuration control, adherence to approved technical data packages tied to multiple revision-level reference drawings, and full conformance certification unless otherwise restricted. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Two delivery lines are specified: 48 units to be delivered to New Cumberland, Pennsylvania, and 804 units to Tracy, California, both with an 81-day delivery window and a required ship date no later than July 23, 2026, for the larger shipment. The total quantity under contract is 852 units at unit prices of $48.00 and $804.00 respectively, with payment terms tied to successful delivery and acceptance. All documentation and compliance procedures must align with DLA and DoD protocols, including transportation instructions and special marking requirements.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

WINDOW WASHER ASSEMBLYThe contract pertains to the procurement of a windshield washer assembly identified by NSN 2540013138038 and part number 6611102 from JLG Industries, Inc., with a quantity of 25 units at a unit price of $25.00, totaling $625.00. The item is classified as a critical application item under DLA Direct, CONUS coverage, with delivery required within 81 days FOB origin, and no variance is permitted in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any standard such as ASTM D3951. If the material is non-hazardous under FED-STD-313, it must be commercially packaged in accordance with ASTM D3951 but still fully aligned with DLA’s more stringent standards and marked per MIL-STD-129. Palletization must adhere to RP001, and the Unit of Issue and Quantity per Unit Pack are strictly defined. The solicitation number is SPE7LX-26-U-8996, issued by the Department of Defense’s Strategic Acq Program Directorate, with responses due by August 7, 2026, and a primary point of contact listed for inquiries.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

LENS, LIGHTThe contract is for the procurement of four units of LENS, LIGHT with NSN 6220-01-315-7815 under solicitation SPE4A6-26-T-09LC, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of award to Fort Bragg, North Carolina, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, governed by stringent DLA Master List of Technical and Quality Requirements, which override commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with hazardous materials following FED-STD-313 and TQ IP025, while non-hazardous items must be commercially packaged consistent with DLA’s requirements. Each unit must be marked and identified per RQ017, and government identification must be removed from non-accepted items under RQ011. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Documentation for source approval requests is mandatory for critical items supplied by Akron Brass Company and Kovatch Corp., and all shipments must use traceable transport methods—parcel post is prohibited. The unit of issue is each, and palletization must meet DLA packaging standards. The contract includes specific identification codes, shipping tags, and delivery tracking references, with the original required delivery date set for July 8, 2026, and point of contact Zachary Lam at DLA. All technical and quality specifications referenced through R and I numbers are controlled by the revision of the DLA Master List active on the solicitation issue date.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier Data Collection and Representation ManagementThe contract requires coordination with subcontractors and suppliers to gather and verify essential business representations including size status, socioeconomic classification, ownership details, and valid CAGE or UEI codes, ensuring all submissions meet current Federal Acquisition Regulation requirements and are accurately reported in SAM.gov. This effort is critical to maintaining compliance across the supply chain and supporting accurate government contracting data integrity. The work is scoped under a subcontract arrangement with a NAICS code of 541611, focused on administrative management and general management services, and falls under the jurisdiction of the Defense Logistics Agency within the Department of Defense. All responses must be submitted by the specified deadline of July 29, 2026, with no set-aside criteria identified, meaning the opportunity is open to all eligible entities regardless of size or status.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Hazardous Materials and Radioactive Materials Compliance SupportThe contract requires comprehensive documentation and labeling support for shipments containing hazardous or radioactive materials, ensuring full compliance with federal and military standards. Key responsibilities include preparing Material Safety Data Sheets, applying MIL-STD-129 labeling requirements, and providing timely advance notifications to government agencies to facilitate safe handling and regulatory adherence. The work demands precision and strict adherence to safety protocols to mitigate risks associated with transporting dangerous substances. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 541620 for other scientific and technical consulting services. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a short window for qualification and submission. Performance location details are unspecified, but the nature of the work implies nationwide or global logistical coordination with U.S. government entities. Contractors must demonstrate expertise in hazardous materials compliance and be prepared to interface directly with defense and regulatory authorities to meet mission-critical shipping requirements.

Environmental Consulting Services

POSTED

DEADLINE

NIST SP 800-171 Compliance Assessment and SPRS Submission SupportThe contract requires the performance or validation of NIST SP 800-171 cybersecurity assessments for both prime contractors and subcontractors to ensure compliance with Department of Defense cybersecurity standards. This includes conducting thorough evaluations of security controls, preparing detailed documentation that supports each assessment, and submitting the final results to the Supplier Performance Risk System to maintain proper federal recordkeeping and visibility into contractor security posture. The work must be executed with precision to meet the stringent requirements set forth by the DoD and support the integrity of the defense supply chain. The effort is classified as a subcontract under NAICS code 541690, and it is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline set for July 29, 2026, indicating an expedited procurement timeline. There is no specified place of performance or set-aside designation, and the work may be performed remotely or at various locations depending on contractor and subcontractor arrangements. Completion of this task is critical to maintaining contractual compliance and ensuring that all entities working on DoD-related projects adhere to standardized cybersecurity frameworks as mandated by federal policy.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Telecommunications Compliance Disclosure ServicesThe contract requires support services to assist the prime contractor in complying with federal regulations under FAR 52.204-25 and 52.204-26 regarding covered telecommunications equipment and services. This includes identifying, documenting, and submitting mandatory disclosures by gathering critical data such as brand and model numbers, OEM or part numbers, justifications for equipment use, and active UEI and CAGE codes. The work involves ensuring all telecommunications-related items used in federal contracts are vetted against prohibited sources and that comprehensive records are maintained to demonstrate compliance with national security directives. The contract is classified as a subcontract under the NAICS code 541611 for management consulting services and is issued by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for proposal submission. The place of performance and specific office location are not specified, suggesting potential remote or nationwide execution. The work is essential to maintaining eligibility for DoD contracts and avoiding penalties associated with noncompliance on telecommunications sourcing.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

DEADLINE

Domestic Ocean Transportation LogisticsThe contract requires the arrangement of ocean transportation for a valve to a FPO destination using U.S.-flag vessels, with provisions allowing for foreign-flag vessel use only if appropriate waiver documentation is submitted and approved. This transport task falls under the North American Industry Classification System code 483111, indicating a focus on inland water freight transportation but applied here for ocean logistics in support of Defense Logistics Agency requirements. The solicitation is structured as a subcontract and is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, with performance required to FPO 09523, a military postal address typically used for overseas installations. The solicitation was posted on July 24, 2026, and responses must be submitted by July 29, 2026, allowing a five-day window for proposal preparation and submission. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. The place of performance is identified only by the FPO zip code, indicating delivery to a military recipient in an overseas or remote location, potentially requiring coordination with military logistics networks. The contract emphasizes adherence to U.S. flag vessel requirements unless an approved waiver is obtained, highlighting compliance with U.S. maritime regulations and government procurement policies governing the use of domestic vessels for defense-related shipments.

Deep Sea Freight Transportation

POSTED

DEADLINE

Export Control Advisory for Technical DataThe contract seeks expert advice on compliance with U.S. export control regulations, specifically the International Traffic in Arms Regulations and the Export Administration Regulations, as they apply to technical data related to a valve. This includes interpretation and application of deemed export rules, which govern the transfer of controlled technical information to foreign nationals within the United States, as well as determination of necessary authorizations or licenses for any such transfers. The scope requires a thorough understanding of how technical data associated with the valve is classified under U.S. defense and dual-use control lists and the procedural steps to ensure lawful handling, documentation, and dissemination in accordance with federal requirements. The contract is structured as a subcontract under the Department of Defense, administered by the Defense Logistics Agency, with performance expected to be conducted at a U.S. military post office address in FPO with ZIP code 09523. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026. The North American Industry Classification System code 541611 indicates the work falls under management consulting services, underscoring the advisory nature of the engagement. No set-aside preferences are specified, and the requirement demands specialized knowledge in export compliance to support lawful technical data management for defense-related hardware.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE