Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Commercial Refrigeration Equipment Testing

Active

International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves performance and compliance testing of commercial refrigeration equipment, including walk-in coolers and refrigerated display cases, in accordance with CSA C657 standards and federal Energy Efficiency Regulations. This work ensures that the refrigeration units meet established safety, efficiency, and environmental standards. The testing process is critical for verifying that equipment adheres to regulatory requirements and operates within designated performance parameters. Issued by the Department of Natural Resources under the Government of Canada, the contract falls under NAICS code 333414, which pertains to commercial refrigeration equipment manufacturing and testing. The contract is set as a subcontract opportunity and focuses on services performed within Canada. The solicitation was posted in mid-January 2026, reflecting the government’s ongoing commitment to energy efficiency and regulatory compliance in commercial refrigeration systems.

General Info

Performance and compliance testing of commercial refrigeration per CSA C657 and Energy Efficiency Regulations.

Agency

Government of Canada → Department of Natural Resources (NRCan)View Agency

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

This scope was carved out of NRCan-5000091272/A.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFSA - Energy Efficiency Regulated Products Testing.

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJan 14

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of Natural Resources (NRCan)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of Natural Resources (NRCan)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performance and compliance testing of commercial refrigeration units such as walk-in coolers and refrigerated display cases per CSA C657 and federal Energy Efficiency Regulations.

Similar Contracts

Same NAICS industry code

FAN ASSEMBLY, CENTRI

Solicitation # SPE8E7-26-T-3579

This contract is for the procurement of one centrifugal fan assembly, identified by NSN 4140-01-556-3312 and part number P-VT3F1 from Hoffman Enclosures Inc. The order is issued by the Defense Logistics Agency for delivery to the USS George H W Bush CVN 77 in Norfolk, Virginia. The required delivery timeframe is 20 days after the order, with an original required delivery date of August 11, 2026. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract specifies destination inspection and acceptance.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5165

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one electrical heating element, identified by NSN 4520-01-572-5558 and part number TF1072-38S from Titeflex Corp Industrial Products. The requirement specifies a delivery timeline of 20 days after order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to Assault Craft Unit ACU 5 at Marine Corps Base Camp Pendleton, California, via the fastest traceable means. The agreement incorporates strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking guidelines. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. The contract also mandates the removal of government identification from any non-accepted supplies and notes that covered defense information may apply to the procurement.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5163

This contract is for the procurement of one electrical nonimmersion heating element, specifically a tubular, U-shaped unit with 26 fins, rated at 440V, 50Hz, single phase, and 2550 watts. The item is identified by NSN 4520011588300 and corresponds to Chromalox Inc part number 056222046. The order is issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-5163 with a required delivery date of May 21, 2025, and a delivery window of 20 days after order. The shipment is destined for the USS Gerald R Ford CVN 78 and must adhere to strict packaging and marking standards, including MIL-STD-129, MIL-E-17555, and DLA packaging requirements. A critical environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Delivery is FOB destination, and the contractor must use the fastest traceable shipping means, explicitly avoiding parcel post.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

One (1) Growth Chamber

Solicitation # ESC-2627-068

The Department of Agriculture and Agri-Food Canada is seeking to acquire one growth chamber for the Harrow Research and Development Centre. This solicitation, identified by number ESC-2627-068, is restricted to suppliers who are currently pre-qualified under Supply Arrangement E60PV-19EQUI. The opportunity was posted on August 13, 2026, with a response deadline of September 22, 2026. The place of performance is located in Ontario, and the primary point of contact for this federal procurement is Jacques Toussaint.

Department of Agriculture and Agri-Food

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Refrigeration Condenser Supply and DeliveryThe Defense Logistics Agency under the Department of Defense is seeking a subcontractor for the supply and delivery of one military-specification refrigeration condenser unit. The equipment must strictly adhere to federal standards for packaging, marking, and shipping to ensure compliance with military requirements. This opportunity is categorized under NAICS code 333414 and is set for performance at FPO 09573. The solicitation was posted on August 12, 2026, and the deadline for responses is August 24, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Refrigeration Expansion Valve (Angle Style, 1/2 Ton, R-12)The Defense Logistics Agency under the Department of Defense is seeking a subcontract for the supply and delivery of one commercial off-the-shelf angle-style expansion valve. The required component must be rated for a 1/2 ton refrigeration capacity and be fully compatible with R-12 refrigerant, while adhering to all applicable military and hazardous materials compliance standards. This procurement falls under NAICS code 333414 and is scheduled for performance at FPO 96666. The opportunity was posted on August 12, 2026, with a response deadline set for August 24, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Intake Air Cleaner UnitThis subcontract involves the procurement and delivery of one intake air cleaner unit for the Department of Defense, specifically managed by the Land Supply Chain agency. The contractor must ensure the unit is fully compliant with all DLA technical, packaging, and labeling standards. The work is categorized under NAICS code 333414 and will be performed in San Diego, California. The solicitation was posted on August 12, 2026, with a response deadline of August 24, 2026. Interested parties can access further details and submit responses through the DIBBS portal using the provided solicitation link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fan Housing (NSN: 4140010375307)This subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the supply and delivery of two units of Fan Housing under NSN 4140010375307. The contractor is responsible for ensuring the units meet all NSN specifications, including strict adherence to military standards for packaging, labeling, and quality assurance. The procurement falls under NAICS code 333414. Interested parties must submit their responses by August 20, 2026, following the posting date of August 12, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Vaneaxial Fan Supply – Commercial Off-The-Shelf (COTS) ItemThis subcontract involves the supply of four commercial off-the-shelf vaneaxial fans for the Department of Defense, specifically through Construction & Equipment MRO SVC I. The items must strictly adhere to DLA technical specifications, including MIL-STD-129 labeling and all necessary hazardous material reporting requirements. The procurement is categorized under NAICS code 333414 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by August 24, 2026, following the posting date of August 12, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5149

Solicitation SPE8E8-26-T-5149, issued by DLA Dist San Joaquin, is for the procurement of 20 electrical nonimmersion type heating elements, identified by NSN 4520-01-232-5614 and part number 2666-0336. The requirement is for a quantity of 20 units with a delivery timeline of 35 days after receipt of order. Delivery is to be made FOB Origin to the DLA Dist San Joaquin warehouse in Tracy, California. The procurement includes strict prohibitions against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The contract mandates rigorous packaging and marking standards, requiring compliance with MIL-E-17555 for preservation, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking and bar-coding. All shipments must adhere to RP001 DLA Packaging Requirements for Procurement. Inspection and acceptance will occur at the destination. Administrative requirements include mandatory invoicing through Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding safeguarding covered defense information, cyber incident reporting, and hazardous material labeling per 29 CFR 1910.1200. Proposals must be submitted electronically via the DIBBS portal.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Chiller Unit Supply and DeliveryThis subcontract opportunity with the Department of Defense involves the procurement and delivery of a new industrial chiller unit to replace Chiller 2 at B500, Offutt AFB. The scope of work includes factory testing and the provision of technical submittals, with a strict requirement for compliance with ASME B31.9 and all applicable manufacturer specifications. The project is designated as a total Small Business Set Aside under NAICS code 333414. Interested parties must submit their responses by September 10, 2026, at 4:00 PM. Performance will take place in the 68113 zip code area.

FA4600 55 Cons Pkp

POSTED

DEADLINE

Supply of Commercial Condensing Gas Water HeatersThis subcontract involves the procurement of two AO Smith BTH 500A 300 gas water heaters for the VA Palo Alto Hospital. The required units must feature 96 percent efficiency, 300,000 BTUs, ENERGY STAR certification, and iCOMM compatibility for system integration. The contract is issued by the Department of Veterans Affairs through the Network Contract Office 21 and is designated as a total Small Business Set Aside under NAICS code 333414. The performance location is in Palo Alto, California, with a response deadline of August 14, 2026.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

in about 23 hours

More opportunities from Government of Canada → Department of Natural Resources (NRCan)

Same awarding agency

Multi-year Rental of an Autonomous Underwater Vehicle (AUV)

Solicitation # NRCan-5000095073

The Department of Natural Resources Canada seeks to lease a deep-water autonomous underwater vehicle system, such as the HUGIN 1000 or an equivalent, to support marine geoscience and oceanographic research. The requirement includes a system rated for depths of at least 2,000 metres, equipped with an integrated navigation suite and scientific sensors for seafloor mapping, along with a climate-controlled 20-foot ISO container for transport and maintenance. The contract is intended to be operated independently by Government of Canada staff and includes provisions for technical documentation, remote support, and insurance coverage. The proposed contract is valued at 800,000 dollars and runs from the award date to March 31, 2027, with options to renew for up to four additional years. While Université Laval is the pre-identified supplier, this Advance Contract Award Notice allows other qualified suppliers to submit a statement of capabilities by August 24, 2026. If a competing supplier demonstrates the ability to meet the minimum essential requirements regarding depth capability, navigation, and sensor payloads, a competitive bidding process will be initiated.

POSTED

DEADLINE

Multi-year Rental of an Autonomous Underwater Vehicle (AUV)

Solicitation # RNCan-5000095073

Natural Resources Canada is seeking to lease a deep-water autonomous underwater vehicle (AUV) system, specifically a HUGIN 1000 or equivalent, for up to five years with an initial term ending March 31, 2027 and four potential one-year renewal options. The system must be capable of operating at depths of at least 2,000 meters and include containerized support infrastructure, mission planning software, technical documentation, and remote support to enable seafloor mapping, marine geoscience, oceanographic research, and Arctic collaboration activities. The requirement includes maintaining the AUV in operational readiness, providing insurance coverage for the asset and its container, and confirming availability at the start of each lease year. While Université Laval / Amundsen Science is the pre-identified supplier due to its unique capability to meet all mandatory technical criteria—including integrated inertial navigation with Doppler velocity log and acoustic positioning, and scientific sensors such as multibeam echosounder, sidescan sonar, and sub-bottom profiler—other suppliers may still submit a statement of capabilities by August 21, 2026. If a qualified alternative is received, a full competitive evaluation will be triggered. The estimated contract value, including all options, is $800,000 plus GST/HST. The procurement is subject to multiple international trade agreements, and Canada intends to retain ownership of any intellectual property generated. The contract falls under an exception permitting limited tendering as only one supplier is currently capable of fulfilling the technical requirements.

Geophysical Surveying and Mapping Services

POSTED

DEADLINE

Multi-year Rental of an Autonomous Underwater Vehicle (AUV)

Solicitation # NRCan-5000095073-0

The Department of Natural Resources Canada, through the Geological Survey of Canada – Atlantic, is seeking to lease a deep-water autonomous underwater vehicle (AUV) system on an annual basis for up to five years, with the initial term extending to March 31, 2027. The requirement is for a HUGIN 1000 AUV system or an equivalent, including a climate-controlled 20-foot ISO container for storage and transport, technical documentation, mission planning software, and remote technical support. The system must be capable of operating at depths of at least 2,000 metres, equipped with inertial navigation, Doppler velocity log, and acoustic positioning systems, and able to carry a multibeam echosounder, sidescan sonar, and sub-bottom profiler for high-resolution seafloor mapping and marine geoscience research. The contractor must maintain the system in operationally ready condition, provide comprehensive insurance coverage for the AUV and container, and confirm readiness at the start of each lease year. The estimated value of the contract, including all options, is $800,000, excluding GST/HST. Université Laval, operating as Amundsen Science, has been pre-identified as the sole supplier capable of meeting all mandatory technical and operational requirements, justifying a limited tendering approach under multiple trade agreements including the CFTA, CETA, CPTPP, and others. This procurement invokes exceptions under these agreements citing the absence of any other capable supplier. Interested parties may submit a statement of capabilities by August 21, 2026, demonstrating how they meet the specified minimum essential requirements. If a qualified alternative proposal is received, a competitive evaluation will be triggered. Ownership of any resulting foreground intellectual property will remain with Canada, given the public dissemination purpose of the research. Inquiries and submissions must be directed to Alexandre Rheault at Natural Resources Canada. A duplicate posting was issued as an error and should be disregarded; the active solicitation is under NRCan-5000095073.

Commercial Air, Rail, and Water Transportation Equipment Rental and Leasing

POSTED

DEADLINE

Stakeholder Engagement Services for the modernization of the Canada Lands Surveys Act.

Solicitation # NRCan#5000095437/B

Natural Resources Canada is seeking task-based professional services through a restricted procurement process open exclusively to Indigenous Supply Arrangement Holders under E60ZT-18TSPS who qualify under Tier 1, Stream 2, specifically in the categories of Facilitator Consultant Senior, Project Planner Intermediate, and Project Administrator Junior. The goal is to award one contract to provide engagement services focused on communicating information and gathering stakeholder input related to modernization efforts under the Canada Lands Surveys Act, ensuring alignment with the Minister of Natural Resources’ authority while explicitly excluding matters governed by other federal legislation like the Indian Act. The contract will run for a 12-month term with an estimated 49 days of effort distributed across the three specified roles: 35 days for the Facilitator, 7 days for the Planner, and 7 days for the Administrator. Only pre-qualified suppliers, including firms such as Acosys Consulting Services Inc., Factr Limited, GSI International Consulting Inc., Makwa Resourcing Inc., Malarsoft Technology Corporation, Maverin Business Services, Monz Consulting Inc., Prologic Systems Ltd., Skyfly Solutions Inc., T.I.7 Inc., and Turtle Island Staffing, have been invited to submit proposals. All bidders must meet a minimum Reliability-level security clearance requirement, though they are not required to hold the clearance at the time of submission. Proposals must be submitted by August 28, 2026, and all documentation may be submitted in either official language. Inquiries must be directed to the Contracting Authority, Mathew Star, and solicitation documents will be distributed directly via email. Bidders may request a debriefing within 15 working days of receiving the award decision. The Crown reserves the right to negotiate with any supplier, and this procurement is not managed through CanadaBuys.ca.

Public Relations Agencies

POSTED

DEADLINE

Data Curation and Machine-Readable Dataset Generation

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Magnetic Thin-Film Characterization and Validation

Testing Laboratories and Services

POSTED

DEADLINE

Magnetron Sputtering Thin-Film Fabrication

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Magnetic Thin Films

Solicitation # NRCan-5000096539

The Department of Natural Resources Canada is seeking specialized technical services to support research and development in permanent magnetic thin-film materials and Materials Acceleration Platforms, with the goal of accelerating discovery, optimization, and validation of advanced magnetic materials through high-quality experimental data and machine learning-driven workflows. The work involves fabricating sputtered thin films—including multilayers, graded compositions, and protective coatings—alongside in-house post-deposition thermal processing under vacuum or inert gas, and comprehensive structural and magnetic characterization using XRD, SEM, thickness analysis, and measurements of coercivity, remanence, magnetization, anisotropy, and energy product. All services must be delivered from facilities located within 75 kilometers of NRCan’s Mississauga laboratories to enable rapid sample transfer and iterative development cycles. The contractor must have a minimum of 10 years of experience in sputtered thin-film fabrication and proven capability to generate structured, machine-readable datasets compatible with computational modeling and active learning platforms. The contract, valued at $60,000 CAD plus applicable GST/HST, has a fixed performance period ending September 30, 2027. The solicitation, identified as NRCan-5000096539 and posted on August 6, 2026, with a submission deadline of August 21, 2026, is structured as a sole-source award under subsection 6(d) of the Government Contracts Regulations, with the University of Toronto pre-identified as the only supplier capable of meeting all mandatory technical requirements. There are no line-item cost breakdowns, option periods, or pricing schedules provided; evaluation is based solely on pass/fail compliance with 10 non-negotiable technical criteria, with no weighted scoring or trade-off analysis. All foreground intellectual property generated under the contract is owned by the Government of Canada, and there are no security clearance, key personnel, or organizational conflict of interest provisions. Proposals must be submitted in writing to the Contracting Authority, Anik Samson, via email or physical mail, with no page limits or format restrictions specified, and no use of U.S. Federal Acquisition Regulation clauses applies, as this procurement follows Canadian government procedures.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Supply and Installation of High-Density Mobile Shelving, National Air Photo Library (NAPL)

Solicitation # NRCan-5000090936

Natural Resources Canada is seeking qualified suppliers to provide and install high-density mobile shelving systems for the secure storage of the National Air Photo Library’s Film Canister and Air Photo Collection. This procurement is governed under Supply Arrangement E60HN-21HDMS, restricting participation to pre-qualified suppliers who hold an active arrangement at the time of submission. The requirement carries specific security obligations due to the sensitive nature of the archival materials. Bids must be submitted by August 11, 2026 at 7:00 p.m. EDT, with the solicitation issued under reference number NRCan-5000090936 and classified under NAICS code 337215. The project’s performance location is Ottawa, Canada, and all proposals must align with the federal procurement framework. Jason Mulligan serves as the primary point of contact for any inquiries, and submissions must be made through the official Canada Buys portal.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

DEADLINE

RFSA - Work related to airborne topographic LiDAR data

Solicitation # NRCan-5000045352/F

This solicitation, numbered NRCan-5000045352/F, is a Request for Supply Arrangement issued by Natural Resources Canada to pre-qualify suppliers for professional services related to airborne topographic LiDAR data acquisition, classification, and inspection, as well as the acquisition of supporting aerial orthophotos. It supersedes all prior versions of this solicitation and is posted on CanadaBuys.gc.ca to allow new suppliers to become eligible for inclusion in a standing supply arrangement. The award of a Supply Arrangement does not constitute a binding contract but establishes a pool of qualified vendors from which individual task orders may be issued later through a separate bid solicitation process. Suppliers may qualify in one or more of four work categories: acquisition and classification of new LiDAR data and orthophotos, classification of existing LiDAR data, inspection of existing LiDAR classifications, and acquisition of aerial imagery supporting LiDAR projects. The Statement of Work outlines detailed deliverables including classified LAS or LAZ files, metadata conforming to NRCan templates, shapefiles of project areas, quality assurance reports, and project planning and progress documentation. All deliverables must meet strict technical accuracy standards and be submitted on time, with acceptance categorized into full acceptance, acceptance with minor changes, conditional acceptance requiring a recovery plan, or non-acceptance for significant deficiencies. All proposals must be submitted via the Canada Post Connect service to procurement-approvisionnement@NRCan-RNCan.gc.ca with a maximum file size of 1GB per message and 20GB per conversation. Proposals must be organized into four electronic sections: Technical Arrangement demonstrating compliance, Certifications from Part 5 including mandatory integrity declarations and Indigenous business certifications if applicable, a signed first page of the RFP, and shapefiles. Suppliers claiming Indigenous business status must complete certification documents but are not required to submit proof at submission—they must be prepared to provide it upon request. The arrangement applies the General Conditions for Supply Arrangements modified to reflect Natural Resources Canada as the contracting authority, along with Professional Services - Medium Complexity and Higher Complexity - Services clauses depending on the complexity of the task order. Performance is monitored through quarterly reporting on all call-ups, including contract numbers, values, services rendered, and contracting authorities, using a Performance Report Card that evaluates both technical content and timeliness. Non-compliance with mandatory requirements, failure to submit required certifications, or delivery failures without approved recovery plans will result in non-responsiveness or removal from the arrangement. The

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

in over 13 years

Media Relations Training Services

Solicitation # NRCan-5000094675

Natural Resources Canada is seeking qualified firms or individuals to provide on-demand media relations training services under a Standing Offer arrangement, with the goal of preparing spokespersons, scientists, program personnel, and senior officials to effectively communicate departmental information, initiatives, and policies to the public through broadcast, print, and digital media. Training must be delivered in both official languages—English and French—either in person across Canada or virtually via Government of Canada-approved platforms, in sessions of up to eight participants or on a one-on-one basis. The Standing Offer is effective from the award date through March 31, 2027, with the possibility of four additional 12-month extensions under the same pricing and conditions. Offerors must submit firm, all-inclusive unit prices in Canadian dollars, excluding taxes and travel expenses, with pricing structured per participant or per group. The procurement follows a Lowest Price Technically Acceptable (LPTA) model, meaning offers must first pass all mandatory technical criteria—identified by terms like “must” or “mandatory”—to be considered responsive, after which the lowest-priced compliant offer will be selected. Key deliverables include session agendas, recorded simulations, message development exercises, Q&A drills, bilingual and WCAG 2.1 AA accessible digital materials, participant evaluations with at least an 80% response rate, and post-session summaries, all submitted within strict timelines. Training must comply with Government of Canada communications policy and accessibility standards, and locations must meet physical accessibility requirements such as barrier-free access and proper lighting. All contractors are bound by stringent compliance obligations, including continuous adherence to certifications provided during the offer process, full compliance with the Code of Conduct for Procurement, and adherence to the Ineligibility and Suspension Policy. Contractors must maintain complete accounting records, including source documents and spreadsheets, and establish an accounting system that allows for seamless government audit access during normal business hours. Invoices must be submitted as PDFs to a designated email address, contain all prescribed elements such as contract and financial codes, itemized costs, taxes, and call-up numbers, and are subject to payment within 30 days of receipt if found acceptable, with a 15-day period for notification of deficiencies. Canada retains the right to inspect and reject deliverables at any time, requiring correction at no additional cost, and may withhold payment until deficiencies are addressed. Contractors must also avoid conflicts of interest, disclose any potential conflicts immediately, and certify that no contingency fees were paid in connection with the solicitation. Legal capacity to contract is

Professional and Management Development Training

POSTED

DEADLINE

RFSA - Energy Efficiency Regulated Products Testing.

Solicitation # NRCan-5000091272/A

This supply arrangement solicitation issued by Natural Resources Canada (NRCan) establishes an open, indefinite-delivery pool of qualified suppliers to perform testing and certification services for products regulated under the Energy Efficiency Regulations, including fenestration products. Suppliers can pre-qualify for up to eight distinct product categories ranging from commercial refrigeration and HVAC equipment to household appliances, electronics, lighting, and fenestration. Pre-qualified suppliers under prior arrangements are exempt from reapplication. The arrangement has no fixed expiration and remains active until the government decides otherwise, permitting the issuance of unlimited individual contracts. Testing must comply with specified industry standards such as CSA C657 and CSA C804, and laboratories must hold ISO/IEC 17025 accreditation. Deliverables include comprehensive technical reports, raw data in Excel, high-resolution equipment photos, and calibration documentation, all subject to government inspection and acceptance primarily at NRCan's Ottawa office or the testing origin site. The focus is on technical compliance with mandatory pass/fail evaluation criteria for each category, without explicit weighting or price consideration indicated in the award process. Key contract requirements emphasize the appointment of a qualified Primary Resource to lead testing operations and interface with NRCan, with any personnel changes requiring prior approval. Integrity provisions mandate submission of an Integrity Declaration Form, disclosure of ownership and control, and adherence to conflict of interest policies, with non-compliance leading to potential disqualification or contract termination. The solicitation process demands electronic proposal submission through CPC Connect with detailed instructions for initiation and supported file formats limited to Microsoft Office and PDFs. Indigenous business designation is recognized with related subcontracting obligations. The contract administration does not specify invoicing mechanisms or payment processing details but includes a vendor performance monitoring system where poor contractor metrics could influence continued eligibility. Amendments, category modifications, and supplier scope expansions can occur throughout the arrangement’s duration to reflect evolving regulatory and testing needs.

Testing Laboratories and Services

POSTED

DEADLINE

in over 14 years