This Government Contract opportunity from Arkansas was posted on August 29, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Complete Wheelchair-Accessible Bus Supply and Delivery

Closed

State & Local

Submission Closed09/17/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336111

New

SLED

Cabinetry Supply and InstallationThis subcontract involves the supply and installation of new kitchen cabinetry for prime contractors working on New York State Office for People with Developmental Disabilities facility projects. The scope of work includes providing cut sheets for layout, moldings, and accessories, with a specific requirement for solid wood cabinets and stainless steel T-bar pulls. All materials must be free of fiberboard and the provider must hold KCMA A161.1 Certification to ensure quality standards are met. The project focuses on the delivery of fully installed cabinetry and moldings. Interested parties should note that the response deadline is November 27, 2026, following a posting date of October 28, 2026. This opportunity is categorized under NAICS code 336111 and is managed through the New York State procurement system.

NYS Office for People with Developmental Disabilities

POSTED

DEADLINE

Chassis and Powertrain Supply/IntegrationThis subcontract for the Fayette County Board of Education in Georgia focuses on the supply and integration of chassis and powertrain components for school transportation projects. The scope of work includes providing chassis frames, engines, and electronic control systems, with a specific emphasis on integrating engine electronics, chassis electrical systems, and Anti-lock Braking Systems. The contractor is responsible for delivering fully integrated chassis and powertrain assemblies along with all necessary manufacturer warranty documentation for each supplied item. The opportunity is categorized under NAICS code 336111 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of December 3, 2026. This agreement ensures that prime contractors have the essential mechanical and electronic infrastructure required to complete vehicle assemblies for the district's transportation fleet.

Fayette County Board of Education

POSTED

DEADLINE

Paratransit Vehicle Chassis SupplyThis subcontract agreement involves the supply of heavy-duty vehicle chassis for prime contractors working on paratransit vehicle projects for the Greater Hartford Transit District. The scope of work includes providing Ford Transit-type chassis and cutaway chassis in lengths of 138 to 139 inches and 158 to 159 inches, all equipped with the heaviest duty available engines, drive trains, and suspension systems. The supplier is responsible for delivering the bare chassis directly to the designated conversion facility and providing all necessary accessory, electrical, parts, and repair manuals. Managed by DAS Procurement for the state of Connecticut under NAICS code 336111, the opportunity was posted on October 21, 2026. Interested parties must submit their responses by the deadline of December 22, 2026.

POSTED

DEADLINE

Specialized Chassis SupplyThis subcontract opportunity, issued by the Walker County Board of Commissioners in Georgia, seeks a provider to supply heavy-duty custom chassis for prime contractors working on Walker County Fire Rescue apparatus projects. The scope of work requires the delivery of completed rolling chassis, including the frame, transmission, and engine. Technical documentation, specifically transmission gear ratios and engine brake horsepower curves, must be provided as part of the deliverables. All supplied equipment must strictly adhere to NFPA 1901 standards and Federal Motor Vehicle Safety Standards. Interested parties must submit their responses by November 24, 2026, in accordance with the solicitation posted on October 21, 2026. The project falls under NAICS code 336111 for the manufacture of heavy-duty trucks.

Walker County Board of Commissioners

POSTED

DEADLINE

Specialized Healthcare Fleet & Logistics SupplyThe Specialized Healthcare Fleet and Logistics Supply subcontract, managed by Kent County Council Procurement Services, involves the provision and maintenance of a diverse range of medical and support vehicles for financial lessors operating on NHS organization projects. The scope of supply includes ambulances, patient transport vehicles, buses, coaches, vans, trucks, lorries, and materials handling equipment, all integrated with necessary telematics and tracking systems to ensure operational efficiency. Interested parties must submit their responses by November 20, 2026, following the posting date of October 21, 2026. This procurement opportunity falls under NAICS code 336111 and is designed to support critical healthcare logistics and transportation infrastructure within the NHS framework.

Kent County Council (t/a Procurement Services)

POSTED

DEADLINE

Class 5 Crew Cab Chassis ProviderThis subcontract opportunity with the Department of Defense for W6QM Micc-Ft Drum requires the provision of one new Class 5 Crew Cab chassis. Eligible vehicles include the Ford F-550, Ram 5500, Chevrolet Silverado 5500HD, or an equivalent model. Technical specifications mandate a 4x4 drivetrain, dual rear wheels, a factory or certified PTO provision, and a turbocharged diesel engine producing a minimum of 330 HP. All supplied equipment must maintain full compliance with DOT and FMVSS safety standards. This procurement is designated as a Total Small Business Set Aside under NAICS code 336111. The solicitation was posted on October 21, 2026, with a response deadline of October 28, 2026. The resulting chassis will support prime contractors working on vehicle projects specifically for the W6QM Micc-Ft Drum agency.

POSTED

DEADLINE

Heavy-Duty Fire Apparatus Chassis SupplyThis subcontract for Heavy-Duty Fire Apparatus Chassis Supply involves providing base vehicle chassis for prime contractors working on County of Hawai'i Fire Department projects. The required chassis must be equipped with a Cummins X15 engine delivering 525 hp and 1850 lb-ft of torque, ensuring full compliance with EPA 2027 emissions standards. Key technical specifications include the installation of a Delco 39MT+ starter, frame-mounted spin-on fuel filters, ABS/Trailer ABS, and pneumatic nylon tubing with compression fittings. The scope of work concludes with the delivery of completed vehicle chassis that are fully prepared for subsequent body and pump installation. This procurement opportunity was posted on October 21, 2026, with a response deadline of November 11, 2026, falling under NAICS code 336111.

Hawaii Fire Department

POSTED

DEADLINE

Base Vehicle SupplyThis subcontract, issued by the Town of Caledon, governs the supply of one new upfitter-ready vehicle intended for prime contractors working on Caledon Fire and Emergency Services projects. The vehicle must feature a red exterior, forged bright aluminum rims, a chrome front grille, full-length running boards, and a close-assist sliding passenger-side door. Interior specifications include leather and vinyl front seats along with both front and rear HVAC systems. The procurement is categorized under NAICS code 336111 and requires the delivery of a chassis equipped with an upfitter-ready electrical system. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline set for November 13, 2026.

POSTED

DEADLINE

Heavy-Duty Cutaway Chassis SupplyThis subcontract agreement establishes the supply of commercial cutaway chassis for prime contractors working on vehicle procurement projects for the Blue Valley Unified School District 229. The required equipment must be a Ford E450 or an equivalent model featuring a 7.3L V8 gasoline engine, a wheelbase between 176 and 178 inches, and a gross vehicle weight rating ranging from 14,500 to 19,500 lbs. Key technical specifications include the integration of heavy duty hydraulic brakes, a 78-Amp-hr battery, and a 40-gallon fuel tank. The successful provider is responsible for delivering a completed, road-ready chassis on an F.O.B. Destination basis. The solicitation was posted on October 16, 2026, with a response deadline of October 28, 2026.

Blue Valley School District

POSTED

DEADLINE

Transit Bus Manufacturing (OEM)This subcontract opportunity with the City of Edmonton involves the manufacturing, supply, and delivery of new and leased low-floor, heavy-duty transit vehicles. The selected provider will be responsible for producing buses across multiple powertrain options, including Diesel, Diesel Hybrid, Battery Electric, and Hydrogen Fuel Cell, ensuring all units meet the specific requirements outlined in Schedule C. The scope of work includes managing all production milestones and coordinating the delivery of fully operational transit buses to the City or designated upfitters within Edmonton. Interested parties must submit their responses by November 30, 2026, to be considered for this transit infrastructure project.

POSTED

DEADLINE

Ambulance Chassis Procurement and Frame ModificationThis subcontract involves the procurement and modification of medium-duty chassis for prime contractors supporting the City of Toledo Fire and Rescue Department. The scope of work requires the acquisition of 2027 International/Navistar MV607 SBA LP chassis, followed by structural frame modifications and the installation of mounting systems designed to accommodate patient care modules. The contractor is responsible for delivering road-ready chassis that strictly adhere to CAAS and AMD safety standards. This project is managed under the Fire/Maintenance Shop Department of the City of Toledo in Ohio, with a response deadline set for November 3, 2026.

Fire/Maintenance Shop Department of City of Toledo

POSTED

DEADLINE

Heavy-Duty Chassis Supply (Type III)This subcontract involves the supply of two new 2024 or newer Type III heavy-duty vehicle chassis for Government of Yukon ambulance projects. The supplier must provide complete chassis from Chevrolet/GM, Dodge, or Ford that are compatible with modular body mounting using vibration-isolating rubber mounts and high-strength fasteners. All provided vehicles must strictly adhere to current Canadian Motor Vehicle Safety Standards. The selected provider is responsible for delivering the rolling chassis directly to the designated upfitter. This procurement is categorized under NAICS code 336111, with a response deadline set for November 12, 2026.

Government of Yukon

POSTED

13 days ago

DEADLINE

in 15 days

AI Contract Overview

This subcontract, issued by the Arkansas Office of State Procurement, involves the supply, configuration, and delivery of a specialized passenger bus. The vehicle must be fully compliant with Arkansas state specifications, featuring a capacity for 12 passengers and accessibility for two wheelchairs. The scope of work encompasses ensuring manufacturer compliance, providing all necessary documentation, and managing the transport of the vehicle. The opportunity was posted on August 29, 2024, with a response deadline of September 17, 2024. Classified under NAICS code 336111, the contract focuses on the procurement of a fully compliant transportation solution that meets all regulatory and accessibility standards required by the state.

General Info

Agency

Arkansas → Office of State Procurement

NAICS

336111 - Automobile Manufacturing

Place of Performance

AR, USA

Set-Aside

NONE

Documents

This scope was carved out of S000000367.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

12 Passenger Plus 2 Wheelchair Bus

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 29

subcontract

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2024, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyArkansas → Office of State Procurement

ContactsNo contacts available

OfficeN/A

Organization / AgencyArkansas → Office of State Procurement

Office AddressN/A

ContactsNo contact information available

Full Description

Supply, configuration, and delivery of a fully compliant 12-passenger plus 2-wheelchair accessible bus meeting Arkansas state specifications, including manufacturer compliance, documentation, and transport.