Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Computerized Mat Cutter

Active
W9124326QA008Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Nebraska Army National Guard is soliciting quotations for a Computerized Mat Cutter under solicitation W91243-26-Q-A008, issued as a Request for Quote with no set-aside and governed by Federal Acquisition Circular 2025-06. The requirement, classified under NAICS code 333515, seeks a single unit equipped with digital depth control, auto homing, LED indicator lights, collision detection and avoidance, and design software capable of processing DXF files. The cutter must include a floor stand, standard and specialized bevel cartridges, a debossing kit with three tip sizes, a pen kit, a quick change cartridge system, edge-to-edge cutting capability, and the ability to cut mat board, foam core, and vinyl. An air compressor, on-site professional installation, and training are required, along with a two-year warranty. The government will not compensate for information submitted under this notice nor is it obligated to notify respondents of the solicitation. Offers must be submitted no later than 10:00 CST on September 3, 2026, with questions due by 10:00 CST on August 24, 2026. Late or incomplete submissions will be rejected. Evaluation will be based on technical compliance and price, with the contract awarded to the most advantageous offer as determined by the government. The point of contact is Patricia Lee-Smith, Contracting Officer, reachable at 402-309-8294 or patricia.h.lee-smith.civ@army.mil, and the place of performance is Lincoln, Nebraska, with delivery and installation required on-site. All responses must conform to the specified requirements and include the attached QA Log CLS.

General Info

Nebraska Army National Guard seeks computerized mat cutter with installation, training, and two-year warranty for Lincoln, Nebraska.

Agency

Department Of Defense → W7NL Uspfo Activity Ne ArngView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

2433 NW 24th Street; Lincoln, NE 68524, NE, 68524

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7NL Uspfo Activity Ne Arng
Contacts1 person available
OfficeLINCOLN, NE, 68524-1801, USA
Organization / Agency
Department Of Defense → W7NL Uspfo Activity Ne Arng
View Agency Profile
Office AddressLINCOLN, NE, 68524-1801, USA
Contacts
Patricia LEE-SMITH
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
This is a solicitation for a commercial supply. W91243-26-Q-A008 is being issued as a Request for Quote. This solicitation, and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06. There is no set-aside being used with this requirement. This requirement has a NAICS code of 333515. The Nebraska Army National Guard (NEARNG) does not intend to pay for any information provided under this notice and is not obligated to notify respondents of this notice. CLIN 0001: Computerized Mat Cutter Specifications: Digital Depth Control Auto Homing LED Indicator Lights Collision Detection and Avoidance System Design and Cut Software with the ability to use DXF files created in a design program Floor Stand45 Standard Bevel Cartridge45+ Deep Bevel Cartridge52 Intricate Bevel Cartridge90 Straight Cartridge Debossing Kit (3 tip sizes)Pen Kit Quick Change Cartridge System Edge to Edge Cutting Ability to cut Mat Board, Foam Core, and Vinyl Air Compressor On-site Professional Installation and Training2 Year Computerized Mat Cutter (CMC) Warranty Evaluation Process: The Government will award a contract resulting from this solicitation to the offer responsible whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical Specifications and Price. Questions are due NLT 10:00 CST on 24 August 2026.Offerors are due NLT 10:00 CST on 3 September 2026.Late or incomplete offers will not be accepted.Point of Contact: Patti Lee-Smith, Contracting Officer Address: 2433 NW 24th Street, Lincoln, NE 68524Phone: 402-309-8294 Email: patricia.h.lee-smith.civ@army.milAttachments: QA Log CLS

Similar Contracts

Same NAICS industry code

NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3681
The contract pertains to the procurement of 1,828 rotary files, identified by NSN 3455010511387 and part number AA51146-2C13B, with specifications including a 1/4 inch shank diameter, 3/8 inch cutter head diameter, 3/4 inch cutter head length, tungsten carbide construction, and double cut fluting, all in accordance with the DLA Master List of Technical and Quality Requirements and Basic CID A-A-51146C. The unit price is $1,828.000 per piece, resulting in a total contract value of $3,342,984. Delivery is required FOB ORIGIN, with a 167-day delivery period from the award date and a final delivery deadline of January 18, 2027. The goods must be shipped to the designated receiving location in Tracy, California, with packaging compliant with ASTM D3951 and mandatory adherence to MIL-STD-129 for marking, labeling, and bar-coding. Palletization must follow DLA’s RP001 packaging requirements, and all packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. The government will inspect and accept the items at the destination, with no tolerance for quantity variance. The solicitation was issued under SPE8E5-26-T-3681 on August 3, 2026, with responses due August 6, 2026, and is targeted for automated award under a fixed-price structure. Compliance with DoD cybersecurity standards, including NIST SP 800-171 and safeguarding covered defense information as per DFARS 252.204-7012, is required, along with adherence to trafficking in persons, employment eligibility, sustainable products, and hazardous materials handling provisions. Contractors must use WAWF for electronic invoicing, report cyber incidents within 72 hours, and ensure all materials meet the prohibitions on hexavalent chromium, covered defense telecommunications equipment, and communist Chinese military company items. All offerors must provide a valid Unique Entity Identifier, CAGE code, and socioeconomic certifications if applicable, and comply with whistleblower rights, fair labor practices, and electronic submission requirements through the DIBBS portal.
DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333515
New
DIBBS
ATTACHMENT, COLLET H
Solicitation # SPE8E5-26-T-3666
The contract is for the procurement of three units of ATTACHMENT, COLLET H with NSN 3460-00-042-4414 under solicitation SPE8E5-26-T-3666, issued by the Defense Logistics Agency. Delivery is required FOB Origin within 20 days of the original required delivery date of July 20, 2026, to the Naval Undersea Warfare Center Division Keyport in Keyport, WA. The unit of issue is each, with no variance allowed in quantity, and the unit price is $3.00 per unit. Packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, with palletization following RP001 and all marking and labeling strictly adhering to MIL-STD-129. The item must not contain intentional mercury or mercury-containing compounds except in specific authorized applications such as batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or NAVSEA-approved chemical reagents; portable mercury-containing devices must be shockproof and have a secondary containment barrier per NAVSEA 5100-003D. Shipment must be traceable and cannot use parcel post; freight must be delivered to the specified Naval Sea Logistics Center address. The contract incorporates multiple Federal Acquisition Regulation and Defense FAR clauses related to cybersecurity, hazardous materials, employment eligibility, trafficking in persons, and safeguarding covered defense information. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200 or applicable federal statutes, and full Safety Data Sheets must be submitted prior to award. The contractor is obligated to flow down these requirements to all subcontractors. The System for Award Management (SAM) must be maintained, and the Unique Entity ID and CAGE code must be disclosed if covered telecommunications equipment or services are provided. Payment must be processed through the Wide Area WorkFlow (WAWF) system, and all invoice submissions must align with fixed-price or cost-type line item specifications. The contract is issued under simplified acquisition procedures and includes clauses for small business representation, whistleblower protections, and limitations on third-party information use. The contract does not specify a trade-off or lowest price technically acceptable basis for award, but socioeconomic preferences and price competitiveness are implied as evaluation factors. No options, key personnel requirements, or security clearances are included. Failure to comply with mercury restrictions, improper labeling, or late delivery
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOL
Solicitation # SPE8E5-26-T-3743
This contract is for the procurement of 10 units of a cutting tool insert with part number CNGG432ADPTC30 and NSN 3455014066836, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3743. The delivery requirement is for shipment within 10 days of the contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with no variance allowed, and packaging must comply with ASTM D3951 while adhering to the stricter requirements of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must conform to MIL-STD-129, and palletization must follow DLA’s specific packaging guidelines. The items are to be shipped by the fastest traceable means, excluding parcel post, to the designated government facility in Springfield, Missouri. The contract mandates strict compliance with DLA’s technical and quality standards referenced through R and I numbers in the DLA Master List, and the supplier must ensure proper marking, labeling, and documentation including the required shipping identifier RDD 555, project code TP 2, and government-unique identifiers such as the TCN and DIC codes. The point of contact for inquiries is Amanda Bird of DLA, with the response deadline set for August 13, 2026, and the original required delivery date listed as August 3, 2026. The unit of issue is each, priced at $10.00 per unit, totaling $100.00. The order is classified under NAICS code 333515 and is a federal procurement with no set-aside classification. Government-use only fields contain internal tracking codes and directives that must be maintained in accordance with defense supply chain protocols.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
DIBBS
CLAMP, ADJUSTABLE
Solicitation # SPE7M2-26-T-5793
The contract specifies the procurement of 33 adjustable clamps with a clamping capacity of 0 to 2 inches and a 1/2-inch bolt size, measuring 4-1/4 inches in length and 1-3/4 inches in width, identified by NSN 3460-00-214-8727 and part number 19101 from JERGENS INC. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. The items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and packaging codes, and must adhere to DLA packaging requirements. All packaging, preservation, and marking materials are prohibited from containing mercury or mercury compounds, in line with NAVSEA 5100-003D requirements, and must also exclude Class I ozone-depleting chemicals. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and documentation for source approval must be provided as needed. The delivery must be completed by January 26, 2027, with an original required date of March 25, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
GAGE, DEPTH, RULE
Solicitation # SPE8E5-26-T-3742
This contract pertains to the procurement of a single unit of a depth gage ruler with NSN 5210-01-602-6297 under solicitation SPE8E5-26-T-3742 issued by the Defense Logistics Agency on behalf of the Department of Defense. The item has no shelf life requirement and is subject to strict export controls under ITAR or EAR regulations, meaning any technical data associated with it cannot be shared or exported without prior authorization from the Department of State or Department of Commerce, including disclosures to foreign nationals within the United States. To access this controlled technical data, contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD training on export-controlled data handling, and pass the DLA Export-Controlled Technical Data Questionnaire, with approval granted by the DLA controlling authority. The solicitation incorporates technical and quality requirements from the DLA Master List referenced online, with revisions controlled based on acquisition type and amendment dates. Cybersecurity requirements mandate that any third-party assessment organization involved must be CMMC Level 2 certified. The place of performance is designated as Jacksonville with a delivery requirement of five days after delivery order award. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is governed under NAICS code 333515. All inquiries should be directed to Khue Nguyen at the provided contact details.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and Copper
Solicitation # 26-58021
The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed
National Research Council of Canada

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
Rotary File Component Supply (NSN 3455-01-045-7948)A single rotary file component identified by NSN 3455-01-045-7948 is being procured under a subcontract to meet military specifications and the Technical Data Package Rev A Gen 1. The requirement is managed by the Defense Logistics Agency under the Department of Defense with performance located in San Diego, California, at ZIP code 92135-5000. The contract falls under NAICS code 333515, indicating machinery manufacturing for industrial use, and was posted for solicitation on July 29, 2026, with responses due by August 10, 2026. The component must fully comply with all applicable military standards and technical documentation to ensure compatibility and performance in defense applications, and the solicitation is accessible through the DIBBS platform using the provided link.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3732
This contract, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3732, requires the delivery of one unit of NSN 3455-01-045-7948, identified as a rotary component, with a strict delivery timeline of 20 days from the award date. The item must be shipped FOB origin, with no variance allowed in quantity, and inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow the DLA Packaging Requirements for Procurement, and the use of ozone-depleting substances is prohibited. The shipment must be sent via traceable freight methods, explicitly excluding parcel post, to the designated delivery point at Naval Air Station North Island in San Diego, California. Government-specific identifiers and control codes, including the freight address, military freight number, and project codes, are included for internal tracking and compliance. The contract incorporates all applicable technical and quality standards referenced through R and I numbers from the official DLA master list, with revisions controlled based on solicitation and award dates. The required delivery date is January 12, 2026, and the contract is set to expire after response deadlines in August 2026.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
GAGE, SNAP, FIXED
Solicitation # SPE8E5-26-T-3729
The contract pertains to the procurement of two units of a GAGE, SNAP, FIXED item identified by NSN 5220-15-033-5333 and part number 506010051, with a total value of $2.00 per unit and a firm fixed price structure. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as a baseline, but all DLA Master List of Technical and Quality Requirements take precedence, mandating adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and traceable freight shipping is required—parcel post is explicitly prohibited. The item is to be delivered to the Marine Corps Systems Command in Quantico, Virginia, with specific shipping and identification codes provided for government use. The contract references technical and quality requirements from the DLA Master List, with revision control tied to the solicitation issuance date. The solicitation number is SPE8E5-26-T-3729, issued by the Defense Logistics Agency under the NAICS code 333515, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The contract includes a covered defense information clause and requires compliance with source approval documentation and removal of government identification from non-accepted supplies. The point of contact is Khue Nguyen, reachable via email and phone, and the unit of issue is each (EA). The required delivery date is set for January 9, 2026, with a project code and tracking identifiers provided for logistical and financial purposes. Government use fields include specific distribution, fiscal, and administrative codes to ensure proper processing and accountability within the Department of Defense acquisition system.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
GAGE, HEADSPACE
Solicitation # SPE8E5-26-T-3737
The contract is for the procurement of 250 units of a GAGE, HEADSPACE with part number 3392AS588 under NSN 5220-01-682-3848, awarded through a sole-source Small Business Set-Aside solicitation with a total estimated value of $250.00. The acquisition is managed by the Defense Logistics Agency District San Joaquin under solicitation number SPE8E5-26-T-3737, with responses due by August 10, 2026, and delivery required 146 days after award, targeting completion by December 30, 2026, with FOB Origin pricing terms. Placement of performance and delivery is specified at 25600 S CHRISMAN ROAD, REC WHSE 57, Tracy, CA 95304-5000, with all inspections and acceptance occurring at the destination under FAR 52.246-1. The item is subject to the DLA Master List of Technical and Quality Requirements, which supersedes other standards, and packaging must adhere to ASTM D3951 and DLA’s RP001, with labeling and barcoding fully compliant with MIL-STD-129 and Hazard Communication Standard 29 CFR 1910.1200. Technical data associated with the item is controlled under ITAR or EAR, and only contractors with an approved US/Canada Joint Certification Program certification, completed DLA export training, and explicit authorization may access such data, per DFARS 252.225-7048. The contractor must also comply with clauses governing trafficking in persons, employment eligibility verification, sustainable products, hazardous material safety, safeguarding covered defense information, and export control compliance, including adherence to NIST SP 800-171 requirements. Invoicing is mandatory through Wide Area WorkFlow, and the procurement is expected to be awarded automatically based on lowest price technically acceptable criteria. Only small businesses may respond, and offerors must provide UEI and CAGE codes, represent their socioeconomic status, and comply with Buy American and Berry Amendment requirements. The government retains inspection and acceptance authority, and all submissions must be electronically filed through DIBBS. The contract includes no option quantities, extended delivery windows, or trade-off evaluation process, emphasizing strict compliance and price competitiveness.
DLA DIST SAN JOAQUIN

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOL
Solicitation # SPE8E5-26-T-3738
The contract solicitation SPE8E5-26-T-3738 seeks the procurement of 15 units of a carbide cutting tool insert, designated as X-5 and honed to an "A" designation, with the NSN 3455-01-251-0437, at a unit price of $15.000 for a total value of $225.00. Delivery is required within 20 days after delivery order issuance, with FOB Origin terms, and all items must be shipped to the designated destination at Ramstein Air Base, Building 2127, TMO RCVG, Ramstein-Miesebach, Germany. The product must conform to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including compliance with CCPA B212.12-91 for technical documentation and CCPA B212.4-02 for government identification markings. Packaging must meet MIL-STD-2073-1E standards with packaging code Q and packing level B, no preservation or cushioning materials required, and must follow DLA Packaging Requirements RP001 for palletization. Labeling must comply with MIL-STD-129, including 2D barcoding, with no special marking required. The item is subject to safeguarding requirements under 252.204-7012 for covered defense information and is covered under provisions prohibiting certain foreign-sourced materials and hazardous substances including hexavalent chromium. Inspection and acceptance take place at the destination, governed by FAR 52.246-1 and quality criteria specified in referenced standards. Electronic invoicing through WAWF is mandated, and contractors must comply with FAR and DFARS clauses regarding whistleblower rights, cybersecurity, trafficking in persons, employment eligibility, sustainable products, and hazard communication including SDS submission. The solicitation is processed under simplified acquisition procedures, with no size set-aside identified, and requires offerors to provide UEI and CAGE codes if they supply covered telecommunications equipment or are part of a joint venture claiming small business status. The contract type remains unspecified pending award, and all submissions must be made electronically via the DIBBS portal by the stated response deadline.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
DIBBS
TRAMMEL BAR
Solicitation # SPE4A6-26-T-10HH
The contract pertains to the procurement of one Tram Mel Bar with NSN 1680-01-469-1758 and part number F80055-1 under solicitation SPE4A6-26-T-10HH, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance both occur at the destination. The item must be packaged per MIL-STD-2073-1E with packaging code U, marked per MIL-STD-129, and palletized in compliance with DLA packaging requirements; special marking is not required. Item Unique Identification is waived per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified at predefined levels: VII for critical, IV for major, and II for minor, with unspecified attributes treated as major. All technical and quality requirements are referenced from the DLA Master List, and the supplier must comply with ISO 9001:2015 alongside tailored higher-level quality provisions. Configuration changes require formal engineering change proposals or variance requests, and the contractor must submit a CMMC Level 2 self-assessment. The item must be shipped via the fastest traceable means, not parcel post, to the designated freight address in Jacksonville, Florida, with a required delivery date of July 14, 2026, and is subject to cybersecurity and defense information controls as outlined in RD002. The unit of issue is each, priced at $1.00, with total price $1.00, and the contract is governed by DLA’s authorized procurement standards and reporting protocols.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → W7NL Uspfo Activity Ne Arng

Same awarding agency

NAICS: 722320
Federal
Field Feeding Support and Mobile Kitchen OperationsThe contract pertains to the provision of meal services during field training exercises through mobile kitchen units, requiring full operational support including transportation, rapid setup, and service delivery in austere and non-permissive environments. The contractor must ensure timely, safe, and nutritionally adequate meals are provided to military personnel under demanding field conditions, with attention to logistics, hygiene, and scalability based on unit size and mission duration. All operations must comply with military standards for food safety and readiness, and the contractor is expected to maintain a flexible responsive capability to support dynamic training schedules across varied terrain and weather conditions. Performance is centered at Ashland, Nebraska, with the contractor responsible for all aspects of logistics including equipment transport, maintenance, and crew deployment to remote locations. The work falls under NAICS code 722320 for food service contractors, and the contract is positioned as a subcontract within the Department of Defense framework under the W7NL Uspfo Activity Ne Arng oversight. The contract does not specify set-asides or solicitation details, and all activities must be completed without reliance on permanent infrastructure, relying instead on mobile, self-sustaining kitchen systems capable of operation in isolated or disrupted environments.
Caterers

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 561710
Federal
Sanitation and Pest Control ServicesThe contract entails routine and deep cleaning services for kitchen, dining, and storage areas within a food-handling environment, ensuring compliance with stringent health and safety standards. Integrated pest management is a core component, designed to prevent and control infestations while maintaining operational continuity and regulatory adherence. Services are to be performed at a location in Ashland, Nebraska, with a ZIP code of 68003, and are classified under NAICS code 561710 for janitorial and cleaning services. This is a subcontract issued under the U.S. Army Corps of Engineers, with oversight from the Department of Defense. The solicitation was posted on July 2, 2026, and while no set-aside type is specified, the work is essential for sustaining sanitary conditions in a federally regulated facility.
Exterminating and Pest Control Services

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 424480
Federal
Food Supply and Commissary LogisticsThe contract titled Food Supply and Commissary Logistics involves the procurement, delivery, and comprehensive inventory management of both perishable and non-perishable food items, strictly adhering to federal sourcing standards and dietary requirements. This subcontract is tied to the Department of Defense through the W7NL Uspfo Activity Ne Arng and is focused on operations centered in Ashland, Nebraska, with a zip code of 68003. The work falls under NAICS code 424480, which classifies it as wholesale trade for food and food service supplies, indicating the contractor will serve as a critical link in the supply chain between distributors and federal facilities. All activities must ensure timely, accurate, and compliant delivery to support nutritional standards and operational readiness. Inventory management will require real-time tracking, temperature-controlled storage and transportation for perishables, and adherence to strict federal guidelines on sourcing, shelf life, and food safety. The contractor is expected to maintain robust systems for stock rotation, spoilage prevention, and audit readiness, ensuring seamless provisioning to federal installations. Performance is governed by the need for consistent reliability and compliance, with all logistics aligned to support the Department of Defense’s mission-critical food service operations. The contract’s structure and location suggest it supports garrison or military commissary operations requiring daily, high-volume food distribution under stringent regulatory oversight.
Fresh Fruit and Vegetable Merchant Wholesalers

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 811411
Federal
Commercial-Grade Kitchen Equipment Maintenance and RepairThis contract encompasses the comprehensive maintenance, troubleshooting, and repair of commercial-grade kitchen equipment including ovens, fryers, refrigeration units, and dishwashers to ensure uninterrupted operational readiness. The work focuses on preventive maintenance protocols and prompt corrective actions to minimize downtime and uphold food service standards in high-demand environments. Services are required to be performed at a designated location in Ashland, Nebraska, with a ZIP code of 68003, ensuring timely response and consistent support for mission-critical kitchen operations. The contract is classified as a subcontract under NAICS code 811411, which pertains to commercial and industrial machinery and equipment repair and maintenance. It is managed under the Department of Defense through the W7NL Uspfo Activity Ne Arng, indicating its use to support military or government food service facilities. The solicitation was posted on July 2, 2026, and the effort is intended to sustain essential kitchen functionality without disruption, requiring skilled technicians capable of handling heavy-duty equipment across diverse operational conditions.
Home and Garden Equipment Repair and Maintenance

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 722310
Federal
Dining Facility Food Service Operations ManagementThe contract encompasses the comprehensive management and daily operation of a dining facility at Ashland, Nebraska, with a focus on delivering meal planning, food preparation, service, sanitation, staffing, and strict adherence to military and dietary standards. All aspects of food service must align with Department of Defense requirements, ensuring nutritional integrity, operational efficiency, and compliance with health and safety protocols. The work includes overseeing personnel, managing inventory, maintaining sanitation practices, and delivering timely, high-quality meals to support military personnel and authorized individuals. This subcontract falls under NAICS code 722310, classifying it as a food service operation, and is administered by the W7NL Uspfo Activity Ne Arng under the Department of Defense. The place of performance is specifically identified as Ashland with ZIP code 68003, indicating the geographic scope of services. Although solicitation details and point of contact information are not provided, the contract was posted on July 2, 2026, and requires a contractor to maintain full operational control of the dining facility while meeting all federal and military regulatory expectations.
Food Service Contractors

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 561990
Federal
Uniform and Hazard Pay Administration (Supplier/Service)This subcontract involves the supply and maintenance of protective uniforms and gear for unexploded ordnance (UXO) personnel, ensuring that these specialists are properly equipped for their hazardous duties. The contract also includes the administration of hazard pay differentials and safety allowances in accordance with Service Contract Act (SCA) requirements, addressing the additional compensation needed for the risks faced by UXO workers. Designated as a Total Small Business Set-Aside under FAR 19.5, this contract supports a small business entity within the NAICS code 561990, which covers miscellaneous services. The Department of Defense, specifically the W7NL Uspfo Activity Ne Arng, is the awarding agency, with performance occurring in Mead, zip code 68041. The contract emphasizes compliance with safety and pay standards while ensuring delivery of high-quality protective equipment to support the mission readiness and safety of hazardous duty personnel.
All Other Support Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
UXO Safety and Compliance OversightThe contract focuses on providing comprehensive safety program management, regulatory compliance monitoring, and audit support specifically for unexploded ordnance (UXO) operations. These services must be delivered in strict accordance with federal labor and safety regulations to ensure that UXO activities are conducted safely and within legal requirements. The contract is a total small business set-aside under SBA guidelines, reflecting a commitment to engaging small businesses in fulfilling these critical safety oversight functions. Awarded by the Department of Defense through the W7NL Uspfo Activity Ne Arng, the subcontract falls under NAICS code 541611, which pertains to administrative management and general management consulting services. The work is to be performed in Mead, with a focus on maintaining compliance and safety standards throughout UXO operations. While specific contact and office location details are not provided, the contract posting date is May 21, 2026, indicating a future-focused engagement aimed at upholding safety and compliance in high-risk military-related activities.
Administrative Management and General Management Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541620
Federal
Unexploded Ordnance (UXO) Technician III – Senior/Lead TechnicianThis contract involves leading the identification, risk assessment, and disposal coordination of unexploded ordnance (UXO), with responsibilities including supervising junior staff and preparing detailed technical reports. The work must adhere to federal safety and environmental regulations to ensure compliance throughout the process. It is designated as a subcontract under a Total Small Business Set-Aside according to FAR 19.5, indicating the opportunity is reserved exclusively for small businesses. The position is classified as Unexploded Ordnance (UXO) Technician III – Senior/Lead Technician and falls under NAICS code 541620. The contracting agency is the Department of Defense, specifically the W7NL Uspfo Activity Ne Arng, and the place of performance is in Mead, with the provided ZIP code 68041. The contract was posted on May 21, 2026, reflecting a specialized role centered on UXO management within a government safety and environmental framework.
Environmental Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541620
Federal
Unexploded Ordnance (UXO) Technician II – Intermediate MitigationThis contract involves an intermediate-level role for a UXO Technician focused on the assessment, stabilization, and controlled movement of unexploded ordnance. The work requires conducting field diagnostics and collaborating closely with senior technicians to ensure safe and effective remediation of hazardous materials. The position demands specialized skills in identifying and managing UXO threats in the field. The contract is a subcontract under a Total Small Business Set-Aside, aligned with NAICS code 541620 for environmental consulting services, and is issued by the Department of Defense through the W7NL Uspfo Activity Ne Arng. The place of performance is located in Mead, with the associated postal code 68041. This opportunity emphasizes compliance with federal acquisition regulations aimed at supporting small businesses, specifically for tasks related to explosive ordnance disposal and mitigation within military or defense-related contexts.
Environmental Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541620
Federal
Unexploded Ordnance (UXO) Technician I – Field OperationsThis contract involves performing entry-level tasks related to the identification, marking, and initial mitigation of unexploded ordnance (UXO) under supervision. The work includes conducting site reconnaissance and hazard reporting while adhering to established safety protocols. It is designed to support field operations for UXO clearance activities, ensuring hazardous areas are properly assessed and documented to prevent risks. The contract is a subcontract issued by the Department of Defense under a Total Small Business Set-Aside, targeting small businesses in accordance with FAR 19.5 regulations. The work is to be performed in Mead, with a focus on maintaining compliance with safety standards throughout the process. This opportunity falls under the NAICS code 541620, which includes environmental consulting services, reflecting the nature of the UXO technician’s responsibilities in field operations.
Environmental Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details