Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

65--CONCENTRATOR,OXYGEN

Awarded
SPE2DS-26-T-050XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of the SAROS MEDICAL OXYGEN SYSTEM MODEL 3000, a portable oxygen concentrator designed for operation in extreme environments on land, air, and sea. The device delivers United States Pharmacopeia 93 percent medical oxygen at a flow rate of three liters per minute, with dose mode capability down to 96 milliliters and a maximum system output pressure of five psig. It operates on both AC power and a rechargeable 24-volt DC battery, drawing 130 watts. The item is designated by NSN 6515-01-588-3083 and must be uniquely identified in accordance with IUID requirements per MIL-STD-130, with the DFARS 252.211-7003 clause enforced. All supplies must comply with DLA packaging standards, and any government identification on non-accepted items must be removed. The solicitation number is SPE2DS-26-T-050X, with a response deadline of May 11, 2026, and delivery required within five days of award to Williamsburg, Virginia. The NAICS code is 334511, and the acquiring activity is the Department of Defense’s Medical Supply Chain under the Medical Supply Chain MD Surg FSF. Bidders must clearly specify the source and part number being offered, and the contract may involve covered defense information. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation or award date, depending on acquisition size, with amendments superseding prior revisions.

General Info

Supply of two Saros Model 3000 oxygen concentrators, USP grade oxygen, delivery within five days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contract Value

$47,025

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

ATLANTIC DIVING SUPPLY, INC.

Award Issued Date

Documents

1

SPE2DS-26-T-050X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficePHILADELPHIA, PA, 19111, USA
Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Office AddressPHILADELPHIA, PA, 19111, USA
Contacts
Cynthia Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONCENTRATOR,OXYGEN
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. CONCENTRATOR,OXYGEN DC; SAROS MEDICAL OXYGEN SYSTEM MODEL 3000; SAROS PORTABLE OXYGEN SYSTEM DESIGNED FOR EXTREME ENVIRONMENTS GROUND, AIR, AND SEA; DELIVERS USP 93 PCT. MEDICAL OXYGEN AT 3 LPM; DOSE MODE TO 96 ML; 15 PSI MAX; 5 PSIG SYSTEM OUTPUT PRESSURE; AC POWER SUPPLY; 130 WATTS, 24 VDC OPERATION; RECHARGEABLE BATTERY. UNIT OF ISSUE: EACH .. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-588-3083 Quantity: 1 EA Purchase Request: 7016638679QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
SBIR / STTR
Hyperspectral Sensor Component Supply
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334511
New
Federal
Request for Information (RFI) – Modular Tactical Signals Intelligence (SIGINT) EW System
Solicitation # FA8629-27-R-5005
The United States Air Force Life Cycle Management Center, specifically the Special Warfare Program Office, is conducting market research through a Sources Sought Synopsis and Request for Information under solicitation FA8629-27-R-5005. The government is seeking to identify capable sources for a body-worn, modular tactical Signals Intelligence and Electronic Warfare system characterized by low size, weight, and power. The system must support full spectrum signals prosecution in adverse environments, including the ability to detect, identify, and direction-find threat signals while stationary or on the move. Key technical requirements include interoperability with Android S20TE and S23TE devices, connectivity via mesh networks, and electronic warfare attack capabilities with tunable output power. Objective goals include Mil-STD-810G compliance, operation between -30C and +55C, and support for advanced jamming techniques such as predictive and reactive hop-set jamming. This RFI is for informational purposes only and does not constitute a formal solicitation or a commitment to procure items. Interested respondents must submit a maximum 15-page response by 12:00 PM Eastern time on November 18, 2026. Submissions must include company identification, socioeconomic status, technical capabilities, and a rough order of magnitude cost estimate. The government also requires information regarding the ability to deliver two units within six months of an order and confirmation of compliance with the Buy American Act or Berry Amendment. Additionally, respondents must address compliance with FAR 52.219-14 regarding limitations on subcontracting and FAR 52.219-33 regarding the Non-Manufacturer Rule if the requirement is set aside for small businesses.
FA8629 Aflcmc Wisk Sof/pr

POSTED

about 3 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334511
New
Federal
ROTOR TORPEDO
Solicitation # N0010426QNF10
Solicitation N0010426QNF10, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a total small business set-aside request for quotations for the manufacture of Rotor Torpedoes (NSN 1355-01-561-1348). The scope includes the production of hardware according to Technical Data Package version 009 and specific quality requirements. The government has included an option to increase the order quantity by up to 100 percent. Delivery is required within 405 days on a FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to several military standards, including MIL-STD-129 for marking, MIL-STD-973 for configuration management, and MIL-STD-2073-1 for preservation and packaging. A critical requirement is that all materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Quality systems must comply with ISO 9001, and each unit must be serialized through the Commander Naval Undersea Warfare Center. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with DFARS cybersecurity and Buy American regulations.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
COMPUTER,FUEL MANAG
Solicitation # N0038327QAA08
Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of Fuel Management Computers (NSN 6610-01-523-8319, P/N 512010-03-01). The primary objective is to return these units to a Ready for Issue (RFI) condition. A critical technical requirement includes the mandatory replacement of all seven transorbs on the internal Fuel Interface Card (PN512023-04-01) as part of standard repair procedures. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Specific prohibitions include the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The contract mandates strict adherence to quality and technical standards, including ISO 9001/SAE AS9100 for quality management and ANSI/NCSL Z540.3 or ISO-10012-1 for calibration. Performance is subject to government inspection and acceptance at the origin, with a required delivery timeframe of 90 days FOB Destination. The award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additional administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in 22 days
View Details
NAICS: 334511
New
International
Binocular Night Vision Device
Solicitation # 202603695
The Royal Canadian Mounted Police is establishing a National Individual Standing Offer for the supply and delivery of Binocular Night Vision Goggle systems and adjustable iris units to enhance member safety. The requirement includes Generation 2+ and Generation 3 White Phosphorous goggles, as well as adjustable iris units, with initial quantities of 25, 75, and 200 units respectively. The standing offer is valid for two years from the date of issuance, with the possibility of two additional one-year extensions. All goods must be delivered Duty Paid to the RCMP National Warehouse in Ottawa, Ontario, within 60 calendar days of receiving a call-up. Selection is based on the lowest compliant bid following a three-phase evaluation process involving visual, operational, and measurement assessments of samples. Technical requirements include compliance with MIL-STD-810H for drop tests, IEC 60825-1 for laser safety, and specific marking requirements such as permanently affixed metal nameplates with laser-engraved serial numbers and ITAR designations. The contract mandates the use of reusable, returnable, or recyclable packaging in accordance with the Policy on Green Procurement. Suppliers must also provide certifications regarding the absence of forced labour, independent offer determination to prevent collusion, and adherence to the procurement Code of Conduct.
Royal Canadian Mounted Police

POSTED

about 10 hours ago

DEADLINE

in 19 days
View Details
NAICS: 334511
New
Fluxmeter Hardware Supply (NSN 6625-01-514-3574)
SPRMM1 DLA Mechanicsburg

POSTED

about 11 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
DIBBS
Manufacturing of Optoelectronic Displays (NSN 5980-20-001-5173)This subcontract involves the manufacture of 18 optoelectronic displays under NSN 5980-20-001-5173 for the DLA Weapons Support Active Devices Division. The selected contractor is responsible for fabricating the units according to specific technical drawings, performing Product Verification Tests, and ensuring all construction is mercury-free. Final deliverables must include all relevant material certifications and process operation sheets. The project is categorized under NAICS code 334511 and will be performed in New Cumberland. Strict adherence to security and data protection standards is required, specifically compliance with DFARS 252.204-7012 and NIST SP 800-171. The response deadline for this opportunity is November 11, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
DIBBS
Supply of Display Units (NSN 7025-01-676-1273)This subcontract involves the manufacture or procurement of two specialized display units matching NSN 7025016761273 for prime contractors supporting the Department of Defense. The selected provider must ensure all units are packaged according to MIL-STD-2073-1E and RP001 standards, with markings applied per MIL-STD-129. Delivery must be executed via the fastest traceable shipping method to the designated place of performance in FPO 96616. To be eligible for this requirement, contractors must maintain a valid CAGE code and current SAM validation. The project falls under NAICS code 334511 and is managed through the Defense Logistics Agency. Interested parties must submit their responses by the deadline of November 9, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
Supply of Fire Detector Sensing ElementsThis subcontract involves the procurement and delivery of four commercial off-the-shelf sensing elements for aviation fire detector systems. These components, specifically Meggitt Safety Systems Inc part number 3001-176-1050/500-18 with NSN 6340-01-322-8526, are intended for prime contractors supporting the Department of Defense through the DLA Weapons Support Aviation Supply Chain. All deliverables must strictly adhere to the DLA Master List technical and quality requirements, as well as physical identification requirement RQ017. The project falls under NAICS code 334511, with a response deadline set for November 4, 2026.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
Supply of Reconnaissance System Camera Control UnitsThis subcontract involves the procurement and delivery of two reconnaissance system camera control units, specifically HurleyIR part number RP-M1R3-PCM, for prime contractors working on DLA Troop Support projects. The items must be packaged according to ASTM D3951 and labeled in accordance with MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act. The opportunity falls under NAICS code 334511 and is managed under the Department of Defense. Interested parties must respond by November 9, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
Radar Set Support Component Supply (P/N SRC3980A)This subcontract involves the manufacture or procurement of one radar set support component, part number SRC3980A, for prime contractors supporting the DLA Weapons Support ASC. The supplier must ensure the unit is produced in strict accordance with RA001 technical and quality requirements and maintains full compliance with the Buy American Act as specified in DFARS 252.225-7001. Managed by the Department of Defense under NAICS code 334511, the contract is overseen by the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CHANNEL FILTER
Solicitation # SPE4A6-27-T-7074
Solicitation SPE4A6-27-T-7074 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one Channel Filter, identified by NSN 5895-01-610-6177 and Northrop Grumman Systems Corporation part number 16-204164-5. The item is designated as a critical application item. Delivery is required by October 15, 2027, with a delivery window of 344 days after order. The contract is established as FOB Origin, with the destination for inspection and acceptance located at DLA Dist San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance for inspection systems and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Key requirements include CMMC Level 2 self-assessment, supply chain traceability documentation per DLA Directive C03, and packaging in accordance with MIL-STD-2073-1E and RP001. While item unique identification is not required, the contractor must comply with MIL-STD-129 for marking and provide hazard warning labels and Material Safety Data Sheets for any hazardous materials. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 541380
New
DIBBS
Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.
Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 326199
New
DIBBS
Kink-Resistant Sheath and Stopcock ProductionThis subcontract involves the production of 7 French kink-resistant micro access sheaths and 3-way stopcocks for prime contractors supporting Department of Defense medical supply contracts. The scope of work includes the extrusion of medical-grade polymers such as PTFE and Pebax to a 7 French diameter, as well as the molding of stopcock valves within a controlled cleanroom environment. To ensure quality and safety, the manufacturer must maintain ISO 13485 certification and conduct rigorous biocompatibility testing. Performance of the contract will take place in San Antonio, Texas, under the oversight of the Medical Supply Chain MD Surg FSF.
All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Echogenic Needle and Dilator ManufacturingThis subcontract involves the manufacturing of tapered echogenic needles and dilators to support prime contractors fulfilling medical supply contracts for the Department of Defense Medical Supply Chain. The scope of work requires the fabrication of 21 to 19 gage needles featuring back-beveled tips made from medical grade stainless steel, finished with specialized echogenic coatings to ensure visibility under ultrasound. To qualify for this performance in San Antonio, manufacturers must possess ISO 13485 certification and utilize precision beveling and grinding machinery. The opportunity is categorized under NAICS code 339112, with a response deadline set for November 2, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332999
New
DIBBS
Nitinol Guidewire SupplyThis subcontract involves the manufacture and supply of precision-engineered nitinol guidewires for prime contractors supporting Department of Defense medical supply contracts through the Medical Supply Chain MD Surg FSF. The scope of work focuses on producing 0.021 inch diameter guidewires using a nickel-titanium alloy, requiring strict adherence to diameter tolerances and flexibility specifications essential for vascular access. Qualified providers must possess ISO 13485 certification and utilize specialized precision drawing and grinding equipment capable of handling micro-diameters to deliver bulk quantities. The performance of this contract is centered in San Antonio, Texas, with a response deadline set for November 2, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
Supply of Propaq Cable Sleeves for X Series DefibrillatorsThis subcontract involves the supply of two royal blue Propaq cable sleeves for X Series Defibrillators to support prime contractors on Department of Defense medical supply contracts. The requirement specifies the provision of genuine Zoll Medical Corporation parts, identified by part number 8000-002005-01 and NSN 6515-01-670-0242. All items must be packaged and marked in accordance with ASTM D3951 and Medical Marking Standard No. 1. The completed order must be delivered to San Antonio, Texas, within five days after receipt of order. This procurement falls under NAICS code 423450 and is managed by the Medical Supply Chain MD Surg FSF.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
DIBBS
Cold-Chain Refrigerated Transport for Medical ControlsThis subcontract for the Department of Defense involves the specialized cold-chain refrigerated transport of temperature-sensitive medical controls for prime contractors on DLA medical supply contracts. The service provider is responsible for maintaining a strict temperature range between 2 and 8 degrees Celsius and ensuring rapid transit within 15 days of manufacture. Deliveries are destined for the United States and South Korea, with a specific place of performance located at APO 96260-5479. To ensure compliance and quality, all products must be packaged and marked according to MIL-STD-2073-1E and Medical Marking Standard No. 1. The contractor is required to deliver verified products accompanied by temperature logs to confirm the integrity of the cold chain. This opportunity falls under NAICS code 484220 and is managed by the Medical Supply Chain MD Surg FSF.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
Supply of Normal Level Plasma Control for APTT TestsThis subcontract involves the manufacture or distribution of Normal Level Plasma Control, identified by NSN 6550-01-519-3928, to support prime contractors for the Department of Defense Medical Supply Chain. The requirement is for one control package consisting of 15 vials and 4 protective sleeves specifically designed for compatibility with Coagulation Analyzer NSN 6630-01-519-3589. Performance will take place in APO 96260-5479 under NAICS code 423450. The contractor must ensure strict adherence to FDA regulations for medical devices and comply with the Buy American Act. Additionally, the provider is required to meet DFARS 252.204-7012 cybersecurity standards to protect sensitive information. The solicitation was posted on October 27, 2026, with a response deadline of November 2, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
Supply of Cardiology Binaural StethoscopesThis subcontract involves the supply of 50 cardiology binaural stethoscopes for prime contractors supporting Department of Defense Medical Supply Chain projects. The required equipment consists of 4th generation, double-lumen, tunable stethoscopes featuring anodized aluminum aerospace alloy headsets and epoxy/fiberglass diaphragms. All units must be black, latex-free, and phthalate-free, meeting the specific requirements of NSN 6515-01-661-3370. The contract mandates strict adherence to the Buy American Act and requires a 7-year manufacturer warranty for all provided units. Delivery is set as FOB Destination to Fort Bragg. Interested parties must respond by November 2, 2026, under NAICS code 423450.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Supplier of Sterile Surgical Suction TubingThis subcontract involves the supply of transparent, non-conductive, and flexible plastic surgical tubing for the Department of Defense under the Medical Supply Chain MD SURG FSF projects. The manufacturer is responsible for producing 144-inch tubing equipped with connectors or funnel tapers, ensuring all units undergo Autoclave or ETO sterilization and are individually packaged according to MIL-STD-2073-1E standards. Compliance with FDA Regulation 880.6740 Class II is mandatory, and the delivered sterile tubing must maintain a shelf life of 60 months. Performance for this contract is centered in Fort Bliss, Texas, with a response deadline set for November 2, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
Supplier of Summit Doppler LifeDop 150 Series Blood Flow DevicesThis subcontract involves the supply of Summit Doppler LifeDop 150 Series handheld, non-display blood flow Doppler units for prime contractors serving the Department of Defense Medical Supply Chain. Each unit must include an integrated audio recorder and 8 MHz vascular pencil probes, with all devices remaining fully compliant with FDA regulations. The contractor is responsible for delivering fully configured medical devices to San Antonio, Texas. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. This procurement falls under NAICS code 423450.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Nonpneumatic Ratcheting Tourniquets (TX3)This subcontract involves the supply of TX3 Nonpneumatic Ratcheting Tourniquets in Olive Drab Green to support prime contractors on Department of Defense projects managed by the DLA Troop Support Medical Supply Chain. All provided items must strictly adhere to NSN 6515-01-667-6208 and the DLA Master List of Technical and Quality Requirements. Additionally, the contractor is required to comply with the Buy American Act and the Berry Amendment, with deliveries made FOB Destination to Fort Polk. Packaging and labeling must meet specific industry and agency standards, including ASTM D3951, RP001 DLA Packaging Requirements, and Medical Marking Standard No. 1. The opportunity is categorized under NAICS code 339113, with a response deadline set for November 2, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
Medical Device Packaging and Delivery ServicesThis subcontract for Medical Device Packaging and Delivery Services supports prime contractors on DLA Troop Support Medical Supply Chain projects for the Department of Defense. The selected provider is responsible for the specialized packaging and transportation of medical equipment, ensuring all devices are packaged according to ASTM D3951 and labeled in compliance with MIL-STD-129 military shipping standards. The scope of work requires the delivery of devices FOB Destination to Fort Bliss, Texas, with a strict delivery timeline of within 20 days from the date of order. This effort falls under NAICS code 488510 and is managed by the Medical Supply Chain MD Surg FSF.
Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334511
Closed
Federal
Trimble GPS Units
Solicitation # AG-1170513
Ocp-Pod-Acq-Mgmt-Branch-Ftc USDA

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 334511
Awarded
Federal
ILLUMINATOR,LED RED
Solicitation # SPRMM126QMF52
SPRMM1 DLA Mechanicsburg

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 334511
Awarded
Federal
JEFO for GPS BRIE Increase Modifications
Solicitation # N6893626RC001
Naval Air Warfare Center

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 334511
Closed
Federal
SPE4A6-26-R-X691, NSN 6610-00-064-9349, PROBE, ASSEMBLY, DETECTION
Solicitation # SPE4A6-26-R-X691
DLA Aviation

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 334511
Awarded
Federal
N0038326PR0R586_FMS
Solicitation # N0038326QB088
Navsup Weapon Systems Support

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 334511
Closed
Federal
TECHNOLOGY LICENSING OPPORTUNITY: Acoustic Camera
Solicitation # S-129409
Triad - DOE Contractor

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 334511
Closed
Federal
Little Rock AFB Counter sUAS System
Solicitation # FA446026Q0382
FA4460 19 Cons Pka

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 334511
Closed
Federal
Missile Guidance Console Supply
Al DLA Aviation At Huntsville

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 334511
Closed
Federal
Panel Assembly and Avionics Component Supply
Al DLA Aviation At Huntsville

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 334511
Closed
Federal
Directed Energy C-UAS Systems (Laser, Microwave, EMP)
Sci Technology Acq Division

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 334511
Closed
Federal
High-Precision 3D Scanner Supply (Artec Spider II)
DLA Maritime - Puget Sound

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 334511
Closed
Federal
Avionics and Electronic Systems Assembly
Naval Air Warfare Center Air Division

POSTED

5 months ago

CLOSED

2 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS