Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Concrete Foundations and Slabs

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the formwork, pouring, and finishing of concrete for equipment pads and structural supports, aligning with NAICS code 238110 for concrete work. It is classified as a subcontract under the City of Waco, Texas, with a posted date of July 17, 2026, and a response deadline of August 10, 2026. Work is expected to be performed at an unspecified location within the state, with no details provided regarding the exact place of performance or point of contact. All submissions must be made through the Texas SmartBuy portal using the provided link, and no set-aside provisions or organization type restrictions are indicated.

General Info

Concrete work for equipment pads and supports in Texas, due August 10, 2026, via Texas SmartBuy.

Agency

Texas → CITY OF WACO

NAICS

238110 - Poured Concrete Foundation and Structure ContractorsView NAICS

Place of Performance

TX, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTexas → CITY OF WACO
ContactsNo contacts available
OfficeN/A
Organization / Agency
Texas → CITY OF WACO
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Forming, pouring, and finishing concrete for equipment pads and structural supports.

Similar Contracts

Same NAICS industry code

NAICS: 238110
New
SLED
Biffy Facility ImprovementsThe contract involves comprehensive improvements to a biffy facility, requiring the construction of a new non-combustible and explosion-proof structure equipped with interior and exterior lighting, ventilation, fire extinguishers, and space heating to prevent freezing. The facility will include cameras for surveillance, accessible doors for equipment maintenance, and surfaces that are sanitizable in accordance with NFPA 820 and FDA guidelines. A redundant pump system with a duplicate backup pump and a biffy tank will be installed to ensure continuous operation during failures, along with backflow prevention measures. Emergency safety equipment including an eyewash station and emergency shower with tempered water will be provided. The electrical and mechanical infrastructure of the facility will be upgraded, including the installation of channel drains and enhanced wet well cleaning systems to improve reliability and safety. The project is forecasted under the agency name Aviation Project Management Group, operated by the Port of Seattle, and classified under NAICS code 238110 for plumbing, heating, and air-conditioning contractors. The primary point of contact is Jay Kim, reachable via email and phone, with Savita Rishiraj serving as the project manager for the contractor side. The solicitation was posted on July 22, 2026, and while no set-aside details or location specifics are provided, all work is expected to be performed at the Port of Seattle facility. The scope emphasizes safety compliance, operational redundancy, and infrastructure modernization to meet regulatory and industry standards.
Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 238110
New
SLED
Deaerator (DA) and Condensate System UpgradesThe Port of Seattle’s Aviation Project Management Group is preparing to upgrade the Central Mechanical Plant by replacing the existing Deaerator and Condensate tanks, aiming to enhance system efficiency, reliability, and safety. This procurement initiative is scoped under NAICS code 238110, indicating it is for plumbing, heating, and air-conditioning contractors, and will likely require specialized expertise in industrial boiler and steam system components. The project involves the removal of outdated equipment and the installation of new, modern systems meeting current operational and regulatory standards, with performance expected at the Central Mechanical Plant facility. All work must be coordinated to minimize disruption to ongoing facility operations. Leila Gonzalez-Rigatto serves as the primary point of contact for inquiries, with Matthew Piccolo designated as the Project Manager overseeing implementation. The solicitation was posted on July 22, 2026, and while it is currently listed as a forecast, interested vendors should prepare to respond once formal bidding documents are released. There is no set-aside designation specified, making this opportunity open to all qualified contractors without restriction based on business size or ownership type. Contractors are encouraged to review the official posting via the provided UI link for detailed technical specifications, timelines, and submission requirements once available.
Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

N/A
View Details