Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONDUIT, METAL, FLEXI

Active
SPE4A7-26-T-576BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 494 feet of metal flexible conduit meeting MIL-PRF-24758A specifications, delivered in continuous length on a spool or reel with no random cuts permitted. Delivery is FOB Origin, with a required delivery date of April 4, 2027, and a need ship date of March 18, 2026, allowing for a 123-day lead time. Quantity may vary by plus or minus 10 percent, and acceptance and inspection occur at the origin under DLA’s RQ009 requirement, using sampling methods per MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are assigned AQL levels of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E, with a QUP of 100, preservation method 10 (cleaning/drying), no preservation or wrap material, cushioning made of air-filled plastic, and unit container marked ZZ to denote continuous length on a spool. Marking must adhere to MIL-STD-129, with no special markings required, and palletization follows DLA’s RP001 packaging requirements. The item is identified by NSN 5975-01-525-3170 and is subject to strict mercury restrictions—no intentional addition or direct contact with mercury or mercury compounds is permitted except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment. The solicitation is a total small business set-aside under NAICS 335999, requiring full compliance with FAR 52.219-28 and associated small business representations. Contract administration requires use of WAWF for invoicing, and cybersecurity requirements are enforced per DFARS 252.204-7012 and NIST SP 800-171 assessment mandates, with additional provisions covering trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, hexavalent chromium prohibition, and export control. Subcontracting for commercial products follows deviation 2026-O00

General Info

Procure 494 feet of MIL-PRF-24758A-compliant weatherproof metal conduit, FOB origin, delivery by April 4, 2027, zero-defect quality, no mercury except exempted uses.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE4A7-26-T-576B for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
RICHARD ELLERY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONDUIT,METAL,FLEXI
CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
The order shall be of continuous length. No random length are acceptable for this material.
TDP Rev A Gen 1
SPE4A7-26-T-576B
SECTION B
IAW BASIC SPEC NR MIL-PRF-24758A NOT 1
REVISION NR A DTD 10/06/2020
PART PIECE NUMBER: M24758-D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017408742 0001 FT 494.000
NSN/MATERIAL:5975015253170
DELIVERY (IN DAYS):0123
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:100 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT CONT ZZ = MATERIAL TO BE SUPPLIED IN 1 CONTINUOUS LENGHT ON SPOOL OR REEL, SHALL BE LABELED IAW MIL-STD-129.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
SPE4A7-26-T-576B
SECTION B
PR: 7017408742 PRLI: 0001 CONT’D
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/18/2026 Original Required Delivery Date:04/04/2027
SPE4A7-26-T-576B NSN/Part Number: 5975-01-525-3170 Quantity: 494 FT Purchase Request: 7017408742QTY: 494 Delivery: 123 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
INSULATOR, PLATEThe contract is for a single unit of an insulator, plate, identified by NSN 5970-01-203-5932, with delivery required 20 days after award to a U.S. Army Aviation Depot address in Tainan City, Taiwan. The item is classified as a commercial item and must comply with technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, bare item marking per RQ017, and removal of government identification from non-accepted supplies per RQ011. Packaging must follow MIL-STD-2073-1E at Level B with code Q, using CLNG/DRY preservation method, and bear the Special Marking Code 32 to indicate a non-extendable 60-month shelf life. Marking and labeling must adhere to MIL-STD-129, including barcoding for shipping containers, with hazardous material labeling conforming to 29 CFR 1910.1200 and MIL-STD-129 for radioactive items. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All shipments must be transported on U.S.-flag vessels unless waived, and the contract employs WAWF for electronic invoicing. The contractor must meet employment and ethical compliance clauses including equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, and hazardous material identification, with additional DFARS requirements for NIST SP 800-171 cybersecurity assessment, subcontractor controls for commercial products, and notification of safety issues. Offerors must provide a Unique Entity ID and CAGE code, declare small business status and any applicable socioeconomic categories, and disclose if they supply covered defense telecommunications equipment. Proposal submissions are mandatory through the DIBBS portal by July 29, 2026, with point of contact for technical inquiries listed as Shenika Thompson.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
BATTERY POWER SUPPLYThe contract is for the procurement of 19 units of a battery power supply identified by NSN 6130-01-525-0952, issued under solicitation SPE7L7-26-T-4297 as a total small business set-aside. The item requires delivery to Robins Air Force Base, Georgia, with a delivery window of 431 days after order and a mandatory ship date of September 29, 2027. The packaging and handling of the item must fully comply with MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for marking, labeling, and barcoding, and must include dry storage conditions with a strict 24-month non-extendable shelf life. The shipment is subject to FOB origin terms and must be invoiced exclusively through the Wide Area WorkFlow system using an invoice and receiving report combo format. The item is subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and distribution is restricted to DLA contractors with approved JCP certification, completed training, and formal authorization to access controlled technical data. The contractor must ensure all hazardous materials are labeled per 29 CFR 1910.1200 and must notify the Contracting Officer in writing prior to shipment if any component contains radioactive materials exceeding specified thresholds. All offers must be submitted electronically via DIBBS by the July 29, 2026 deadline and must include a valid Unique Entity ID and CAGE code. The contractor must affirm small business status and complete all required representations, including compliance with clauses on employment eligibility, equal opportunity, combating trafficking, and whistleblower rights. The contract incorporates DFARS clauses requiring NIST SP 800-171 compliance for cybersecurity, and mandates that the manufacturer be certified as a CMMC Level 2 accredited third-party assessment organization. No pricing details are confirmed beyond the quantity and extended value of $19.000, and the basis of award remains unspecified. The contractor is responsible for ensuring conformity to all inspection criteria at the destination point, with acceptance governed by zero non-conformance requirements for critical attributes and sampling standards aligned with MIL-STD-1916 and ASQ standards.
WARNER ROBINS

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
Federal
Electrical Equipment & TestingThe Naval Air Warfare Center, Weapons Division, China Lake, intends to award a sole source firm fixed price contract to Acumentrics for the delivery and testing of one lot of electrical equipment designated as ANB1501RSPNLIA. This action is justified under FAR 6.103.1 because Acumentrics is the original equipment manufacturer and the only source capable of performing the necessary performance testing required to ensure compatibility with existing on-site systems. No request for quotes will be issued, and this notice serves only as an announcement of intent to proceed without competition. Interested parties may submit a capability statement by 07/29/2026 at 0900 to demonstrate their ability to meet the technical requirements for quality, accuracy, reliability, and schedule, referencing solicitation number N6893626SIMACQD550000E5500000371. All submissions must be sent to Yvonne Stockwell at yvonne.c.stockwell.civ@us.navy.mil. Vendors must maintain an active registration in SAM.gov prior to any potential award, as the government cannot obligate funds to entities without an active status, and processing SAM verification can take up to 15 days. Additionally, contractors must be certified through the Defense Logistics Information Services Joint Certification Program to access Controlled Unclassified Information or Export Controlled Information. Access to such information is restricted to a single designated Data Custodian per CAGE code, who must have an approved DD 2345 form. Contractors are responsible for coordinating with their CAGE code’s Data Custodian to obtain proper authorization before requesting access to CUI. Failure to comply with these requirements will result in disqualification from consideration.
Naval Air Warfare Center

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
Federal
RFQ - Buckley SFB Rectifier Inverter System Replacement
FA2543 460 Cons

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
Federal
Airborne Direction Finding SystemsThis request for information is issued by NIWC Atlantic under the Department of Defense for market research purposes to identify industry capabilities in airborne Direction Finding systems capable of rapidly and accurately geolocating threat emitters in contested RF environments for USSOCOM. Respondents are asked to provide detailed technical data including antenna type and performance metrics across HF to SHF frequencies, with supporting graphs for gain, VSWR, and DF accuracy. The system must comply with MIL-STD ruggedization requirements, feature an Ethernet port and an RF port for IF data, and interface with software defined radios while adhering to a Modular Open Systems Approach. Complete SWaP-C characteristics—dimensions of all components, total system weight, and peak and average power consumption—are required, with emphasis on achieving significant reductions in size, weight, and power compared to existing systems. Respondents must disclose the Technology Readiness Level and Manufacturing Readiness Level with supporting evidence, identify whether the solution is COTS, GOTS, or modified, and outline a supply chain risk management strategy. A non-binding Rough Order of Magnitude cost must be provided for quantities of 10, 50, and 100 units, covering the antenna, processor, software, training, and one-year warranty. Production capabilities and lead times for initial and full-rate production must be described, including the ability to scale to meet these unit quantities. All submissions become Government property and will not be returned, and no payment will be made for responses. Responses must be submitted via email by noon EDT on July 17, 2026, and the effort is expected to be UNCLASSIFIED, with vendors advised not to include proprietary information. This RFI is not a solicitation and does not obligate the Government to award a contract, but it informs future acquisition strategies that may leverage Other Transaction Authority under 10 U.S.C. §4022 or a Commercial Solutions Opening under 10 U.S.C. 3458.
Niwc Atlantic

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
INSULATION PIPE
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
Federal
Dynapower system configurationThe Naval Surface Warfare Center Carderock Division is soliciting a sole-source contract with Dynapower LLC for the system configuration of high-power generation equipment under FAR Part 13.106-1(b), citing unique circumstances that justify non-competitive procurement. The NAICS code is 335999 with a small business size standard of $600 million in annual receipts, and no set-aside is being used. The solicitation, identified by number N0016726Q1128, incorporates all applicable provisions and clauses effective through Federal Acquisition Circular FAC 2026-01 and DFARS DPN 20260702, with full terms detailed in the attached solicitation document. Interested parties may express interest by submitting a capabilities statement by 12AM EST on July 30, 2026, which must include pricing, FOB point, point of contact details, GSA contract number (if applicable), business size, payment terms, and clear demonstration of ability to meet all technical requirements. Responses must be sent via email to Steven Besanko at steven.w.besanko.civ@us.navy.mil, and while this notice is not a formal request for quotes, all submissions received by the deadline will be reviewed to determine whether a competitive procurement is warranted. The contract will be performed at the organization’s location in Bethesda, Maryland.
Nswc Carderock

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
Federal
New Eaton UPS Battery & RentalThe Navy is soliciting quotes for a comprehensive UPS system replacement and rental solution at the Naval Surface Warfare Center, Port Hueneme Division, under solicitation BD3-007, with a total small business set-aside under FAR 19.5 and NAICS code 335999. The requirement includes the procurement and installation of a permanent Eaton 93PM 40kW UPS system with an integrated Narada 9-module lithium battery cabinet and a Power Xpert Gateway Card for remote monitoring, along with the temporary rental of a Powerware 9390 40kVA UPS and matching battery cabinet for up to eight months during the transition. The contractor must handle full logistics including removal and EPA-compliant disposal of the existing faulty UPS, electrical installation, crane-assisted rigging, and manufacturer-certified commissioning of both rental and permanent systems, backed by a five-year OEM support plan covering parts, labor, and annual preventive maintenance visits. The contract is structured as a firm fixed price with a 36-week performance period including a 30-week manufacturer lead time, and delivery of all hardware is scheduled for May 2027, with immediate rental deployment beginning in September 2026. All items must be new, non-refurbished, and compliant with DoD unique identification standards per MIL-STD-130 and MIL-STD-129, with machine-readable markings verified using approved technology. Proposals must be submitted no later than 3:00 p.m. PST on July 23, 2026, via email in PDF format to the designated point of contact, with no hard copies accepted. An organized site visit is scheduled for July 23, 2026, requiring all attendees to register via SECNAV 5512 form by June 21, 2026, and provide names and citizenship status, with non-U.S. citizens required to present passports; expenses for attendance are not reimbursed. Evaluation will follow a lowest-priced, technically acceptable approach, with technical capability and past performance serving as pass/fail gates—failure on either disqualifies the offer. Pricing is the sole weighted factor at 100 percent, and offerors must submit complete administrative data including CAGE code, DUNS, company size certification, and confirmation of SAM registration. Invoicing must be conducted electronically via Wide Area Workflow (WAWF), with mandatory email notifications to
Commanding Officer

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
Federal
NOAA: Build to Specifications Power Supply with Fan Trays for the National Logistics Support Center in Grandview, MO.
Department Of Commerce Noaa

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
Federal
DWA Motor Control Centers
US Army Engineer District Walla Wal

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
Federal
70--CONVERTER,ANALOG TOThe solicitation seeks a converter, analog to digital, under NAICS code 335999, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia. The proposal must be submitted by July 27, 2026, and includes a wide array of contractual clauses covering critical compliance areas such as Buy American requirements, royalty disclosures, security prohibitions, transportation by sea, and annual representations and certifications. Specific provisions mandate adherence to government payment instructions, integrity of unit pricing, restrictions on liability for high-value items, and protocols for the release of offeror information under the AbilityOne program. Additional directives address equal opportunity for workers with disabilities, value engineering initiatives, and the use of facsimile proposals, while special attention is given to national defense priorities and emergency preparedness through priority rating notifications. The contract also incorporates deviations and updated certifications effective through 2026, requiring strict compliance with evolving federal acquisition standards. The point of contact for inquiries is Gregory Koch, reachable via email and telephone, with the place of performance unspecified but likely tied to DLA’s operational footprint. All submissions must align with the mandated representation and certification requirements, including those tied to free trade agreements and balance of payments programs, and must comply with the most recent security exclusions and facility-level restrictions imposed by the government. The solicitation is open to all eligible contractors with no designated set-aside, and responses must be submitted through the designated SAM.gov portal prior to the deadline. Any failure to adhere to the listed clauses could result in disqualification or contract penalties.
Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
Federal
Fixed Frequency Converter System/GeneratorThe contract seeks to procure a single 180-kVA low-profile fixed frequency converter system designed to deliver reliable 400 Hz aircraft ground power for maintenance operations involving KC-46 and C-17 aircraft. The system must meet or exceed all technical requirements outlined in the Statement of Work and include all necessary input and output cables, comprehensive technical documentation, commissioning support, a standard manufacturer warranty, and detailed maintenance instructions. The equipment must be brand name or equal and capable of seamless integration into existing facility power infrastructure to ensure uninterrupted aircraft support. This is a total small business set-aside under NAICS code 335999, solicited under number FA448426Q0028 with a response deadline of August 17, 2026. The procurement is managed by the Department of Defense through the Office of FA4484 87 Cons Pk located in Joint Base MDL, New Jersey, with performance required at Cape May Ch, New Jersey. The primary point of contact is Vivian Donaldson, reachable via phone and email, with Sarah Brown listed as secondary contact. All proposals must be submitted through the official SAM.gov portal prior to the stated deadline.
FA4484 87 Cons Pk

POSTED

about 19 hours ago

DEADLINE

in 23 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 339999
New
DIBBS
Item Unique Identification (IUID) Marking ServicesThe contract entails the Physical IUID marking of deliverable items in strict compliance with MIL-STD-130 standards, requiring the application of Data Matrix barcodes and the subsequent registration of each item’s unique identifications in the Department of Defense IUID Registry through the WAWF-IUID system. This subcontract is focused on ensuring full traceability and accountability of government-furnished or contractor-produced items by adhering to standardized military marking protocols that support logistics, maintenance, and inventory management across the defense supply chain. All marking activities must meet exacting government specifications for durability, location, and data content to ensure long-term readability and system integration. The solicitation, issued under the NAICS code 339999 for other miscellaneous manufacturing, is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense and is open for responses until August 7, 2026. The work is performance-based, with no explicit place of performance specified, allowing flexibility for contractors to execute the marking services at their own facilities or designated locations, provided all regulatory and registry requirements are satisfied. Contractors must be prepared to integrate with DoD systems and ensure real-time or timely data submission to the IUID Registry via WAWF, requiring robust internal processes for data capture, validation, and reporting to meet federal compliance obligations.
All Other Miscellaneous Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Risk Management & Prohibited Vendor ScreeningThis contract requires comprehensive vendor screening and supply chain mapping to ensure strict compliance with Section 889 of the National Defense Authorization Act, which bans the use of telecommunications equipment and services from designated restricted vendors. The objective is to identify and exclude any products, components, or services linked to prohibited entities within the supplier network, thereby mitigating cybersecurity risks and maintaining federal compliance across all tiers of the supply chain. The work demands rigorous due diligence, including deep-dive analysis of vendor affiliations, component sourcing, and manufacturer histories, with documentation to demonstrate adherence to regulatory requirements. The contract is issued as a subcontract under the NAICS code 541611 for management consulting services and is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The response deadline is August 7, 2026, and the performance location is not specified, indicating potential nationwide or global scope depending on supplier networks. Bidders must be prepared to support ongoing compliance verification and provide verifiable, auditable evidence of vendor clearance, ensuring all elements of the supply chain are free from covered telecommunications equipment as defined by the NDAA. The engagement is critical to safeguarding defense infrastructure and maintaining the integrity of DoD supply chains.
Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 488999
New
DIBBS
Export-Controlled Items Handling & LogisticsThe contract involves providing comprehensive logistics and compliance support for the handling and transfer of export-controlled items regulated under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). This includes securing the necessary export licenses, coordinating secure transportation protocols, and ensuring full adherence to U.S. government export control requirements throughout the supply chain. All activities must maintain strict confidentiality and security to prevent unauthorized access or disclosure of sensitive technical data and physical items. This is a subcontract opportunity under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 488999 for other support activities related to transportation. The posting was made on July 24, 2026, and responses are due by August 7, 2026. The place of performance details are not specified, indicating flexibility or classification of location, and the work must be performed in compliance with all applicable federal regulations governing defense-related exports. The contract is accessible through the DIBBS portal for qualified subcontractors to review and submit proposals.
All Other Support Activities for Transportation

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & CMMC Compliance SupportThe contract seeks support for implementing and maintaining cybersecurity controls to achieve CMMC Level 2 compliance and adherence to NIST SP 800-171 standards. This includes the full scope of preparing for and sustaining audit readiness, ensuring that all required security controls are properly documented, configured, and operational. The work demands a robust incident response plan that enables timely detection, containment, mitigation, and reporting of cybersecurity events, with an emphasis on continuous monitoring and improvement of the security posture. This subcontract is tied to the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and falls under the NAICS code 541512 for computer systems design services. The opportunity is open for responses until August 7, 2026, and requires the contractor to deliver comprehensive, actionable cybersecurity support that aligns with federal mandates for protecting controlled unclassified information. While the place of performance and point of contact details are unspecified, the work is expected to directly support defense supply chain security objectives by ensuring that systems are resilient, compliant, and capable of withstanding evolving cyber threats.
Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Technical Documentation & Compliance VerificationThe contract requires the preparation and validation of technical documentation to demonstrate compliance with Department of Defense standards, focusing on material traceability, inspection reports, and verification of prior government use. All documentation must be rigorously compiled and reviewed to meet stringent regulatory requirements and ensure that supplied components or systems adhere to mandated military specifications. The effort involves detailed recordkeeping and cross-referencing of sources to confirm that materials and processes have been previously accepted or utilized under government oversight. This subcontract is solicited under NAICS code 541330 and is open for responses until August 7, 2026, with the posting date listed as July 24, 2026. The ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific location and point of contact details are not provided. The work is expected to be performed in support of defense programs, and proposers must ensure their documentation workflows are fully aligned with DoD compliance frameworks. The solicitation is accessible via the DIBBS website for further procedural guidance.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332311
New
DIBBS
Structural Panel Supply (NSN: 1560-01-196-4395)The contract involves the supply of structural panels identified by NSN 1560-01-196-4395, requiring full compliance with military specifications. All items must include traceability documentation, condition certification, and IUID marking to ensure proper identification and accountability. Panels may be sourced as new, reconditioned, or government surplus, but each must meet the required performance and quality standards regardless of condition. The work is classified as a subcontract under NAICS code 332311, and the solicitation is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 24, 2026, with a response deadline of August 7, 2026. The place of performance and office address details are not specified, indicating flexibility in logistics or reliance on standard government procurement channels. Bidders must ensure full adherence to all military standards for documentation, marking, and condition verification, with no allowances for noncompliant items. The procurement is conducted through the DIBBS system, and interested parties must access the official link to submit proposals and review full requirements.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
New
DIBBS
FILTER ASSY, RETURN,The contract is for a single unit of a Filter Assembly, Return, identified by part number 901-325-502-101 and NSN 1680-01-583-4352, with a delivery requirement of 193 days after award. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with specific clauses covering physical identification, packaging, inspection at origin, and removal of government identification from non-accepted supplies. The supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization and comply with all source approval documentation requirements. Export control restrictions apply due to technical data governed by ITAR or EAR regulations, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal authorization from DLA. The solicitation is a Total Small Business Set-Aside under FAR 19.5, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with responses due by August 7, 2026, and a primary point of contact listed as Michael Kershaw.

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIThe contract pertains to the procurement of two structural aircraft panels identified by NSN 1560-01-196-4395, with a delivery schedule of 292 days after contract award. The solicitation, issued under number SPE4A7-26-Q-0874, requires strict compliance with multiple Department of Defense and Defense Logistics Agency requirements including Cybersecurity Maturity Model Certification Level 2 for third-party assessors, adherence to DLA packaging standards, and the handling of Covered Defense Information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Inspection and acceptance are to occur at the origin, and any non-accepted items must have all government identification removed. Physical marking of the bare item is required, though Item Unique Identification is explicitly waived per the service customer’s direction. Technical data associated with this item is subject to export control under ITAR or EAR, restricting unauthorized disclosures to foreign persons or entities; access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract is administered by the Department of Defense’s ASC Supplier Operations AE and AF Division, with Brian Kurtz as the primary point of contact, and responses are due by August 7, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract solicitation SPE4A7-26-T-579T calls for the procurement of three structural plates, NSN 1560-01-650-5406, to be delivered to Tinker Air Force Base, Oklahoma, with a 113-day delivery timeline from the solicitation issuance date. The item is governed by a comprehensive set of technical, quality, packaging, and cybersecurity requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, including specifications for inspection at origin, configuration change management, export control of technical data, and minimum labeling and marking standards per MIL-STD-129. The contract mandates compliance with CMMC Level 2 Self-Assessment and requires safeguarding of Covered Defense Information under DFARS 252.204-7012, with strict limitations on access to export-controlled data restricted to contractors approved under the US/Canada Joint Certification Program and who have completed mandatory DLA training. Packaging must adhere to RP001 DLA Packaging Requirements and ASTM D3951 for non-hazardous materials, with hazardous materials subject to FED-STD-313 and TQ IP025. All shipments must be barcoded and labeled per MIL-STD-129, with FOB origin terms applying, and invoicing must be conducted exclusively through the Wide Area WorkFlow system. The solicitation applies a fixed-price contract structure with inspection and acceptance performed at the manufacturer’s facility, requiring the contractor to maintain a quality management system compliant with ISO 9001:2015 and to ensure zero non-conformances during inspections. Export control obligations under ITAR and EAR are binding, prohibiting unauthorized disclosure to foreign persons, and the contractor must comply with DFARS 252.225-7048 for controlled technical data. Additionally, the contractor must affirm representations regarding employment eligibility, trafficking in persons, hazardous materials, cybersecurity, and compliance with regulations prohibiting procurement from Communist Chinese Military Companies. The contract includes numerous FAR and DFARS clauses covering contractual changes, payment instructions, subcontracting, whistleblower rights, and prohibitions on hexavalent chromium and toxic material handling. The solicitation closes on July 29, 2026, and submissions must be made electronically via DIBBS only, with no physical proposals accepted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336211
New
DIBBS
BOX CONNECTOR, ELECTThe contract is for the procurement of 120 packages of BOX CONNECTOR, ELECT, with each package containing two units, as defined by the unit of issue 1 PG = 2 EA effective March 1, 2016, and identified by the NSN 5975012954166. Delivery is required within 162 days from the award date, with an original required delivery date of April 5, 2027, and a need ship date of January 3, 2027. The supplies are to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E, including preservation method 10, cleaning/drying method 1, and the use of wrap material JA with no cushioning. Marking must adhere to MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement (RP001). The contract strictly prohibits intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, and specified NAVSEA reagents; portable mercury-containing devices must be shock-proof and include a secondary containment per NAVSEA 5100-003D. Hazardous material handling is governed by DFARS 252.223-7001, requiring compliance with OSHA’s Hazard Communication Standard and submission of Safety Data Sheets, with radioactive materials subject to specific labeling under MIL-STD-129. Invoicing and payment must be processed through WAWF, and contractors are required to submit invoices using approved document types such as Invoice and Receiving Report or Invoice 2in1. The contract includes federal acquisition regulation clauses related to equal opportunity, combating human trafficking, employment eligibility verification, hazardous materials identification, sustainable products, cybersecurity safeguarding (including NIST SP 800-171), subcontractor management, and prohibitions on covered defense telecommunications equipment. Contractors must provide unique entity identifiers and CAGE codes and certify their small business status if applicable. The solicitation was issued on July 24, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF
Motor Vehicle Body Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336310
New
DIBBS
BLADE, WINDSHIELD WIThis contract pertains to the procurement of a windshield wiper blade, identified by part number 90-0327-1 from Grimes Aerospace Company and S232T601-85 from The Boeing Company, under NSN 1680-01-518-7388, with a total quantity of 15 units to be delivered within 16 days of contract award. The item is classified as a critical application component and must comply with stringent quality and technical requirements, including ISO 9001:2015, FAA airworthiness approval, and specific marking standards such as MIL-STD-129 and FAA bare item marking. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for attributes are strictly defined. Packaging must adhere to MIL-STD-2073-1E with preservation method 33, dry climate control, and no cushioning, all while meeting DLA packaging requirements and palletization standards. The product must be delivered FOB origin, with inspection and acceptance occurring at destination, and special marking is not required. Cybersecurity compliance at CMMC Level 2 self-assessment is mandated, and covered defense information rules apply. The delivery destination is Tinker AFB, Oklahoma, with a required ship date of July 7, 2025, and an original delivery deadline of October 10, 2026. All requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the time of solicitation, and no variance from specified standards is permitted without formal request.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details