Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Configuration and Engineering Change Management

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires maintaining a precise configuration baseline for pump hardware and managing all engineering changes through a formal Request for Variance process that necessitates government approval before implementation. This ensures that any modifications to the hardware are thoroughly evaluated, documented, and authorized to preserve system integrity and operational standards. The work is classified under NAICS code 541330 and is structured as a subcontract under the Department of Defense, specifically managed by SPRMM1 DLA Mechanicsburg. All activities must align with federal defense requirements, with performance expectations centered on strict configuration control and rigorous change management protocols. The solicitation was posted on May 4, 2026, and while specific location details are not provided, performance is expected to support defense operations tied to the overseeing agency's mission.

General Info

Maintain pump configuration baseline; all changes require government-approved variance under DoD subcontract.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126FS501.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPRMM126FS501

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Maintain configuration baseline for pump hardware and manage engineering changes via Request for Variance (RFV) with government approval.

Similar Contracts

Same NAICS industry code

Scattergood GS. Units 1&2 Green Hydrogen-Reaady Modernization

Solicitation # scattergood-gs-units-12-green-hydrogen-reaady-modernization

Kiewit Infrastructure West Co. is seeking sub-quotes for the Scattergood GS Units 1 and 2 Green Hydrogen-Ready Modernization project for the City of Los Angeles Department of Water and Power. The scope of work is extensive, encompassing professional and technical services such as civil, structural, mechanical, electrical, and instrumentation and controls engineering, as well as utility locating, geotechnical and geophysical investigations, BIM/3D modeling, and environmental assessments. Additional requirements include hazardous materials surveys, permitting support, and CPM scheduling. Interested firms must contact Kiewit to receive an Invitation to Bid via the Building Connected system, with a bid date of September 11, 2026, and a response deadline of September 30, 2026. Eligible bidders include Disadvantaged, Minority, Women, and Other Business Enterprises, provided they hold certifications from recognized agencies such as the SBA or MBDA. Responsive bidders must possess a valid California Contractor's license and provide acceptable insurance. Subcontractors and material contractors are required to provide bonding for 100 percent of their contract value, though Kiewit will reimburse the associated bond premiums. Furthermore, Kiewit, as a signatory to various collective bargaining agreements, requires bidders to demonstrate an ability to maintain labor harmony on the project. For further information or to review plans and specifications, interested parties should contact Lead Estimator Joe Bockelman.

Kiewit Infrastructure West Co.

POSTED

about 4 hours ago

DEADLINE

Seeking Qualified Subconsultants for City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # seeking-qualified-subconsultants-city-bends-southwest-sewer-improvement-phase-3-project-no-1ssw3

Water Systems Consulting, Inc. is seeking qualified subconsultants to assist with the Southwest Sewer Improvement Phase 3 project for the City of Bend, Oregon. The scope of work involves professional design services to address sewer system deficiencies, including the extension of gravity sewer mainlines, the decommissioning of pump stations, and the installation of service laterals for properties currently using septic systems. Additional requirements may include transportation improvements. Specifically, WSC is looking for expertise in roadway and drainage engineering, surveying and mapping, right of way services, and public outreach. This project is funded by the Clean Water State Revolving Fund and administered through the Oregon Department of Environmental Quality. The solicitation is open to various small business designations, including DBE certified firms, and is associated with NAICS codes 541330, 541370, 531390, and 541820. Interested parties must respond by September 29, 2026.

Water Systems Consulting, Inc.

POSTED

about 4 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in California. The project seeks firms specializing in engineering, environmental services, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically targeted toward Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises. Interested firms must contact Charlie Brown via email to submit a qualifications package and request solicitation documents. The primary NAICS code associated with this effort is 541330, though several other professional and technical service codes are applicable. All necessary documentation and expressions of interest must be coordinated by the specified deadlines to be considered for participation in the project.

POSTED

about 4 hours ago

DEADLINE

Subcontracting Opportunity: City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # 27-3214

Parametrix is seeking qualified subconsultants to provide civil engineering design and right-of-way services for the City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3. The project aims to address sewer system deficiencies in southwest Bend by extending a gravity trunk sewer line to unsewered areas, decommissioning existing pump stations in the Romaine Village area, and installing service laterals to transition properties from private septic systems to public sewer. The scope may also include roadway reconstruction, ADA curb ramp and curb design, and minor transportation improvements such as turn lanes or mini roundabouts. The project is funded by the Clean Water State Revolving Fund administered through the Oregon Department of Environmental Quality, with a total design and construction budget of 3,875,000 dollars. The procurement process is managed by the City of Bend, with a proposal deadline of September 29, 2026. Selection is based on technical and administrative capabilities, with the potential for interviews to influence final scoring. Key deliverables include a preliminary engineering report, a public outreach plan, and construction contract documents at 30, 60, 90, and 100 percent completion, culminating in record drawings. The City intends to advertise for construction services in Fall or Winter 2027. Parametrix is actively soliciting firms with recognized federal, tribal, state, local, or independent DBE certifications as part of a good faith effort to include small, minority-owned, women-owned, and veteran-owned businesses.

POSTED

about 4 hours ago

DEADLINE

Electrical Infrared Scanning

FREG5 - Facilities Management & Capital Planning - Region V

POSTED

about 15 hours ago

DEADLINE

EV Charging Infrastructure Designer

City of Decatur

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Solar PV and Battery Energy Storage System (BESS) Designer

City of Decatur

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Electrical Engineering Sub-Consultant (Microgrid & Power Distribution)

City of Decatur

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Design / Engineering for Microgrid System and DC fast charger

Solicitation # PE-64458-NONST-2027-000000037

The City of Decatur is seeking qualified professional engineering firms to provide turnkey services for the design, bid assistance, and construction administration of a microgrid system and DC fast charger for electric vehicles at the Decatur Police Department located at 420 West Trinity Place. The project involves integrating a solar photovoltaic generation system and a battery energy storage system designed to optimize renewable energy and peak demand management during normal grid-connected operations, while ensuring critical loads remain operational during emergency grid-islanded conditions. The selected consultant will be responsible for delivering complete design plans for bidding and providing construction administration through installation, commissioning, testing, and interconnection with Georgia Power. This solicitation, posted on September 11, 2026, requires proposals to be submitted by October 13, 2026. The project is funded by the City and a Department of Energy grant, necessitating strict compliance with Build America, Buy America (BABA) requirements and federal regulations. Awarded firms must maintain a non-discrimination policy and carry an umbrella insurance policy of at least 5 million dollars. Evaluation is based on a 100-point weighted system, and the expected project start date is November 2026, following coordination with Georgia Power. Payment will be made monthly based on progress reports and invoices submitted to the City Manager.

City of Decatur

POSTED

about 16 hours ago

DEADLINE

in about 1 month

CEI, San Antonio District, IH-10

Solicitation # 601CT000006556

The Texas Department of Transportation has issued solicitation 601CT000006556 for Construction Engineering Inspection (CEI) services. The project is located within the San Antonio District and specifically covers IH-10 from Pioneer Road to FM 464 in Guadalupe County, Texas. This procurement falls under NAICS code 541330 and is managed by the agency's SLED organization. Interested parties must submit their responses by October 2, 2026, at 1:00 PM. The primary point of contact for this solicitation is Philip Howlett, who can be reached via email at Philip.Howlett@txdot.gov or by phone at 210-784-6844. The solicitation was officially posted on September 10, 2026.

Texas Department of Transportation

POSTED

about 16 hours ago

DEADLINE

Infrastructure - Request for Proposal - RFP FOR SITE AND GEOTECHNICAL INVESTIGATION CONSULTANT SERVICES FOR VARIOUS LOCATIONS – ELEVEN (11) SOUTH ALBERTA SCHOOL SITES

Solicitation # AB-2026-06239

The Infrastructure agency is seeking proposals from qualified consultants to provide site and geotechnical investigation services for eleven school sites located in South Alberta. This solicitation, identified as AB-2026-06239, focuses on essential land assessments and technical investigations to support the development of educational facilities in the Calgary region. Interested parties must submit their responses by the deadline of October 7, 2026, at 10:00 PM. The procurement process is being managed by Project Procurement Specialist Nkechi Nzewi, and further details regarding the submission process can be found through the official Alberta purchasing portal.

POSTED

about 16 hours ago

DEADLINE

Facility and Operational Assessment Services

The Tulalip Tribes

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Technical Documentation & Reverse Engineering Services

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Pressure Transmitter Supplier

Irradiation Apparatus Manufacturing

POSTED

about 20 hours ago

DEADLINE

Chain Hoist Manufacturer/Supplier

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

SPRMM1-26-Q-GC63-CHAIN HOIST

Solicitation # SPRMM1-26-Q-GC63

Solicitation SPRMM1-26-Q-GC63, issued by DLA Mechanicsburg, is a request for quotations for two chain hoists, identified by NSN 7HH 3950-01-702-6959 and reference number 8196788-2. This procurement is designated as a high-priority requirement to support a US Navy CASREP due to mission-essential equipment breakdown. The delivery is required as soon as possible on an FOB Destination basis, with the primary shipment destination being the USS John P Murtha LPD 26. The contractor must ensure all items are new and unused, adhering to strict packaging and marking standards including MIL-STD-2073, MIL-STD-129, and MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and evidence of product traceability. The solicitation is not a small business set-aside, and the evaluation will be conducted based on the criteria for part-numbered items.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 20 hours ago

DEADLINE

TRANSMITTER,PRESSUR

Solicitation # SPRMM126QKH36

This fixed-price solicitation from DLA Mechanicsburg is for the manufacture and supply of a pressure transmitter, specifically referencing Cage Code 81349 and part number PGT-GP-100-G2. The contract requires the item to be listed on Qualified Products List 24212, and award evaluations will be based on Lowest Price Technically Acceptable criteria. Contractors must provide an informal cost breakdown to determine fair pricing and must identify the Original Equipment Manufacturer if they are not the manufacturer themselves. Key administrative requirements include the mandatory use of Wide Area Workflow for combined invoice and receiving reports and CMMC Level 1 self-certification for cybersecurity. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. The government mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a fee to cover administrative costs. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QKG67

This solicitation is for the manufacture and procurement of a circuit card assembly, identified by CAGE code 3SDB5 and reference number 937E343G1. The contract is issued by the Defense Logistics Agency (DLA) Mechanicsburg and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. The current deadline for the submission of quotes has been extended to October 13, 2026. Key requirements include adherence to ISO9001 quality standards, MIL-STD-130 for physical identification, and MIL-STD 2073 for packaging. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. Additionally, authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

in about 1 month

PUMP UNIT,CENTRIFUG

Solicitation # SPRMM126RMC71

This solicitation, issued by DLA Weapons Support Mechanicsburg, is for the manufacture and procurement of a Centrifugal Pump Unit, identified by NSN 4320-012274925 and part number 5773203-24. The requirement specifies that the unit must meet the design and performance standards of drawing 5773203-24 from the Naval Sea Systems Command (CAGE 53711). The procurement is a fixed-price effort utilizing Lowest Price Technically Acceptable (LPTA) criteria for award evaluations. Key quality requirements include higher level inspection, with source inspection required at the manufacturing facility, and physical identification in accordance with MIL-STD-130. The solicitation has undergone several amendments, including the incorporation of Emergency Acquisition Flexibilities, the dissolution of the small business set-aside, and an increase in quantity with the addition of CLIN 0001AC. The final deadline for the receipt of proposals was established as September 15, 2026, at 4:00 pm EST. Contractors are required to submit invoices and receiving reports via the PIEE-WAWF system. Additionally, any offeror who is not the original equipment manufacturer must identify the OEM and their CAGE code. All contractual documents are considered issued upon transmission via mail, facsimile, or electronic commerce methods.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

SERVER,AUTOMATIC DA

Solicitation # SPRMM126QKB48

This solicitation is for the manufacture and procurement of the Server, Automatic DA, identified by part number F109656-C and Cage Code 1BEK6. The contract is issued by the Department of Defense via DLA Mechanicsburg under SEPA-EAF authority. Key requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD 2073 for packaging. Because the item is intended for use on submarines or surface ships, it must be entirely free of metallic mercury contamination. The procurement process requires electronic submission of invoices and receiving reports through PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. The current deadline for quote submissions is September 29, 2026. Vendors are encouraged to provide quantity price breaks and must provide proof of authorized distribution if they are not the manufacturer. All contractual documents are considered issued when sent via mail, facsimile, or electronic commerce methods.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Military Standard Marking and Packaging

Marking Device Manufacturing

POSTED

DEADLINE

Oxygen System Component Cleaning Services

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Manufacturing of Cylinder Assembly, A

POSTED

DEADLINE

Material Traceability and Compliance Auditor

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS