Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacture of Cable Assembly AB and Cable TC9007-2

Active

Federal

Response Deadline12/01/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of custom cable assemblies for prime contractors supporting Naval Surface Warfare Center projects. The scope of work specifically requires the fabrication of Cable Assembly AB and Cable TC9007-2 in strict accordance with drawings 8290958 and 8290586 under CAGE 53711. The contractor must maintain rigorous compliance with Department of Defense item unique identification reporting and DODISS standards. Additionally, the provider must demonstrate the capability to manage NOFORN specifications via DD Form 1425 to ensure the secure handling of sensitive information throughout the delivery of the completed assemblies.

General Info

Manufacture custom cable assemblies for DoD projects following strict technical and security standards.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

336612 - Boat Building

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QKE02.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY AB

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures custom cable assemblies for prime contractors on Naval Surface Warfare Center projects. Fabricates Cable Assembly AB per drawing 8290958 and Cable TC9007-2 per drawing 8290586 (CAGE 53711). Ensures compliance with DoD item unique identification (UID) reporting and DODISS standards. Requires capability to handle NOFORN specifications via DD Form 1425. Delivers completed cable assemblies.

Similar Contracts

Same NAICS industry code

Supplier of Marine Navigational Lights (NSN 6220016289651)This subcontract involves the procurement or manufacture of 85 units of Marine Navigational Lights meeting NSN 6220016289651 specifications. The supplier will support prime contractors delivering on DLA Troop Support Construction and Equipment contracts, with final delivery of the packaged and marked hardware to the DDSP New Cumberland facility. All deliverables must strictly adhere to packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 336612 and is managed through the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

O-Ring Component Supplier (NSN 5331-01-687-3913)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing and manufacture of O-rings meeting NSN 5331-01-687-3913 specifications. These components are intended for prime contractors delivering naval spare parts to the USS COOPERSTOWN LCS 23. To ensure quality and longevity, the contractor must package the items in medium-duty, waterproof, greaseproof, and opaque bags designed to prevent UV deterioration, with each package containing two O-rings. Eligible suppliers must maintain an active SAM registration and strictly adhere to all NSN standards. The performance of this contract is located at FPO 34085 under NAICS code 336612. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Supply of Water Closets (NSN 4510015608924)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the procurement and delivery of five water closets meeting NSN 4510015608924 specifications. The selected provider must ensure all units are packaged according to RP001 DLA Packaging Requirements for Procurement and delivered to the designated government location in New Cumberland, Pennsylvania, following DIBBS system requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336612. Interested parties must adhere to the response deadline of November 9, 2026, to provide the necessary supplies for prime contractors supporting DLA Troop Support contracts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1946

Solicitation SPE7M4-27-T-1946 is a small business set-aside fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine hatch, identified by NSN 2040-01-655-3226. The required delivery date is October 23, 2026, with a delivery window of 10 days after receipt of order. The item is to be shipped to the 0553 CS BN CO A Composite AWCF SSF at Fort Hood, Texas. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001. Environmental compliance is mandatory, specifically the prohibition of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations for this requirement were due by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

DOG, DOOR, MARINE

Solicitation # SPE7M4-27-T-1957

Solicitation SPE7M4-27-T-1957 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine door dog, identified by NSN 2040-01-649-3701 and part number 124-7386935 (53711) PC 51. The requirement specifies a delivery lead time of 20 days after order, with the destination for inspection and acceptance being the USS Ronald Reagan CVN 76 in FPO AP 96616. The award may be processed via automated award, and a price evaluation preference is provided for HUBZone small business concerns. The contractor must adhere to strict quality and security standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. The use of additive manufacturing is prohibited unless specifically authorized. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item is subject to export controls under ITAR or EAR, requiring the contractor to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Check Valves (NIIN 016579547)This subcontract involves the manufacture and supply of 18 check valves (NIIN 016579547) for prime contractors supporting U.S. Navy NAVSUP projects. The contractor is responsible for fabricating the units according to Cage Code 34228 design 8590952-D1217483 and Technical Data Package Version 005, utilizing precision machining to ensure all specific tolerances are met. The agreement requires strict adherence to regulatory standards, including Buy American compliance and the provision of MSDS documentation per OSHA and FED STD 313. Additionally, the contractor must obtain source approval as outlined in the NAVSUP Philadelphia brochure. This project is managed under the Department of Defense via the Navsup Weapon Systems Support Mech agency.

Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

TORQUE ASSIST ASSEM

Solicitation # N0010426QYA3Y

Solicitation NO0104-26-Q-YA3Y is a fixed-price requirement issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Torque Assist Assembly (NSN 7HH 2040-01-088-4976). The project is tied to the FY26 S&OP project with a planned award in FY27. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and technical standards, including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is the total absence of metallic mercury in the supplied materials. Performance is measured by the Repair Turnaround Time (RTAT), calculated from the physical receipt of the asset in the Commercial Asset Visibility (CAV) system to the date of government acceptance. Government Source Inspection (GSI) is required, and all freight is handled as FOB Origin. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The extended deadline for quote submission is December 4, 2026, at 4:30 PM local time.

Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in about 1 month

SEGMENT #7 STERN

Solicitation # N0010427QLA16

Solicitation N00104-27-Q-LA16 is a Request for Quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of one Segment #7 Stern (NSN 1940-01-676-6351). The item must be produced according to design reference Cage Code 66618 and comply with physical identification standards per MIL-STD-130. Delivery is required within 30 days of award, with freight established as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. Government source inspection is mandatory, and both inspection and acceptance will occur at the point of origin. The government will utilize a trade-off process for award, prioritizing past performance over price. Offerors must be authorized distributors of the original manufacturer to be considered. Technical requirements include strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various federal regulations, including Buy American and Balance of Payments programs, and requires compliance with DFARS safeguarding of covered defense information.

Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

Solicitation # N0010426QYAJZ

Solicitation N00104-26-Q-YAJZ is a competitive, fixed-price procurement for the manufacture of Gland Actuators (NSN 2040-01-093-7730) for use on Navy submarines. The requirement is for three units and will be awarded to the eligible, responsible offeror with the lowest price technically acceptable (LPTA) quote, though the government may consider past performance as a higher priority than price during evaluation. The acquisition falls under NAICS code 336612 with a small business size standard of 1,000. Technical requirements specify that the actuators must be manufactured from Nickel-Aluminum-Bronze per ASTM B150/B150M and adhere to drawing 4398602. Strict quality assurance is mandated, including a mandatory first article testing and inspection process that requires government approval before production begins. The contractor must maintain a quality system compliant with MIL-I-45208 or ISO 9001 and provide extensive objective quality evidence, including certified mill certifications and mercury exclusion certifications, as the materials must be entirely free of metallic mercury. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific palletization standards for domestic and overseas shipments. The contract incorporates various FAR and DFARS clauses regarding Buy American preferences, cybersecurity safeguarding, and prohibitions on certain foreign telecommunications equipment. Final inspection and acceptance will occur at the origin via the cognizant DCMA-QAR.

Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

Galvanized Boat TrailerThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, involves the fabrication and delivery of a specialized galvanized steel tandem axle trailer. The equipment is specifically designed to support electrofishing vessels used in CT DEEP Fisheries Division projects, requiring precise weight and capacity specifications, the installation of rollers, and the integration of waterproof LED lighting within waterproof housings. The project falls under NAICS code 336612 and is intended for prime contractors operating on these division projects. Interested parties must submit their responses by the deadline of November 12, 2026, to provide the completed trailer as specified in the contract requirements.

DAS Procurement

POSTED

about 10 hours ago

DEADLINE

Electrofishing Boat Hull & AssemblyThis subcontract, managed by DAS Procurement for the State of Connecticut, involves the fabrication and assembly of an 18-foot boat hull intended for use in CT DEEP Fisheries Division projects. The scope of work requires the contractor to either procure or build the vessel and perform specific installations, including a console seat and a jack plate designed to enable shallow water operations. All materials and processes must adhere to Environmentally Preferable Products standards to ensure environmental compliance. The project is categorized under NAICS code 336612 and requires the delivery of a fully assembled vessel. Interested parties must submit their responses by November 12, 2026, following the posting date of October 28, 2026. The final deliverable is a complete 18-foot boat hull equipped with the specified console and jack plate for the prime contractor.

DAS Procurement

POSTED

about 10 hours ago

DEADLINE

Fisheries Electrofishing Boat for DEEP

Solicitation # 26PSX0194

The State of Connecticut Department of Administrative Services, on behalf of the Department of Energy and Environmental Protection (DEEP) Fisheries Division, is soliciting the procurement of a fully assembled electrofishing boat and trailer system. This equipment will be utilized for fisheries population assessment and research activities. The required system includes an 18-foot boat, a galvanized tandem axle trailer with rollers and waterproof LED lighting, an outboard motor with electric starting and power trim and tilt systems, and a generator with a minimum of 5,500 watts continuous and 7,000 watts peak output. The generator must feature heat and noise reduction housing to remain below ConnOSHA noise thresholds. The selected contractor must be a manufacturer or an authorized dealer and is prohibited from using subcontractors. Before production begins, the contractor is required to provide detailed schematic plans and a production timeline, followed by periodic progress updates with photographs. Final delivery will be made free on board to the DEEP Headquarters in Old Lyme, Connecticut, where the agency will inspect the equipment to verify operational compliance. Payment is processed via ACH or P-Card, with standard terms of 45 days after acceptance, or 25 days for certified small or minority business enterprises. The contractor must also comply with federal Energy Star standards, Environmentally Preferable Products standards, and various state certifications regarding non-discrimination and campaign contribution restrictions.

DAS Procurement

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Keyboard Component SupplierThis subcontract, managed by the Department of Defense through DLA Mechanicsburg, establishes a Keyboard Component Supplier to provide raw materials, switches, keycaps, and PCB components to prime contractors. The supplier is responsible for sourcing high-reliability electronic components and plastics that strictly adhere to Cage Code 62833 specifications, ensuring all bulk deliveries meet the manufacturer's requirements. Compliance is a critical component of the agreement, requiring the supplier to provide GHS-compliant product labels and Safety Data Sheets for hazardous materials in accordance with FAR 52.223-3. Additionally, the supplier must maintain rigorous supply chain security standards as mandated by FASCSCA orders. The opportunity falls under NAICS code 334220, with a response deadline set for November 20, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Data Entry Keyboard ManufacturerThis subcontract involves the manufacture and assembly of data entry keyboards for prime contractors under DLA supply contracts. The production must adhere to Cage Code 62833 and reference number 536-0015, with a specific focus on meeting Department of Defense standards. The contractor is responsible for the delivery of finished units that are fully labeled and registered. Key technical requirements include physical identification and labeling in accordance with MIL-STD-130, REV N, and the implementation of IUID per DFARS 252.211-7003 using laser engraving equipment. Managed by the SPRMM1 DLA Mechanicsburg agency under NAICS code 334111, the opportunity was posted on October 28, 2026, with a response deadline of November 20, 2026.

Electronic Computer Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services, issued by the Department of Defense under SPRMM1 DLA Mechanicsburg, requires the provision of professional military-grade packaging and labeling for prime contractors. The scope of work involves packaging units according to MIL-STD-2073 and applying markings per ASTM D3951-18 to ensure all items are shipment-ready for transport to the DLA Distribution DDSP New Cumberland Facility. The contractor must utilize MIL-SPEC crates and approved cushioning materials to deliver fully prepared units. This opportunity falls under NAICS code 488510, with a response deadline set for November 19, 2026.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Multi-Purpose Serve OEM ManufacturerThis subcontract opportunity, managed by the Department of Defense through DLA Mechanicsburg, requires the manufacture and supply of one Multi-Purpose Serve unit for prime contractors. The selected provider must be the Original Equipment Manufacturer or an authorized distributor capable of precision manufacturing according to Cage Code 4NCQ6 and reference SB-990179-AM. All units must adhere to MIL-STD-130 for physical identification marking and utilize proprietary tooling and materials to ensure design specifications are met. The procurement falls under NAICS code 334412 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 19, 2026. The final deliverable for this contract is one fully completed Multi-Purpose Serve unit.

Bare Printed Circuit Board Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacture of Test Cables (TC71 / TC91012)This subcontract, managed by the Department of Defense through DLA Mechanicsburg, involves the manufacture of specialized test cables TC71 and TC91012 for prime contractors supporting Naval Surface Warfare Center projects. The fabrication process must strictly adhere to Technical Data Package Version 003 and DODISS standards, utilizing specific Special Tooling or Special Test Equipment as outlined in the contract schedule to ensure the cables are suitable for equipment verification. The project falls under NAICS code 332911 and was posted on October 28, 2026, with a response deadline of December 1, 2026. The primary objective is the delivery of completed, high-specification test cables that meet all rigorous military and technical requirements for naval applications.

Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Authorized Supply of Waveguide SwitchesThis subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the authorized supply of 14 Waveguide Switches (NIIN: LLTRL5653) for prime contractors supporting DLA/NAVSUP supply contracts. The provider is required to procure the exact items from the approved Original Equipment Manufacturer under Cage Code 09080, ensuring strict supply chain traceability from the manufacturer to the prime contractor and verifying all part configurations. The scope of work includes coordinating delivery and packaging in accordance with MIL-STD-2073 standards. In addition to the physical delivery of the units, the contractor must provide complete evidence of traceability. The opportunity is categorized under NAICS code 423430, with a response deadline set for November 17, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Manufacture of Waveguide SwitchesThis subcontract involves the precision fabrication of 14 waveguide switches, identified by NIIN LLTRL5653, for prime contractors supporting DLA/NAVSUP supply contracts. The work must be performed according to design Cage Code 09080 and adheres to strict military standards, specifically MIL-STD-129, REV R for marking and MIL-STD-2073 for packaging. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 334220, the contract requires the delivery of all units accompanied by comprehensive supply chain traceability documentation. The solicitation was posted on October 28, 2026, with a response deadline of November 17, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Component Finishing and CoatingThis subcontract, titled Component Finishing and Coating, involves providing specialized surface treatments and coatings for prime contractors supporting DLA/NAVSUP AEGIS Weapons System projects. The scope of work includes the application of protective coatings, anodizing, and plating on adapter components using industrial coating tanks and plating equipment. All work must be performed in strict accordance with military specifications and NAVSUP WSS Code 0772 standards. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 332813, the contract requires the service provider to maintain HAZMAT certification. The solicitation was posted on October 28, 2026, with a response deadline of December 4, 2026. The primary objective is the delivery of finished and coated components that meet rigorous defense industry requirements.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Stable Base Master Phototools (Artwork) DevelopmentThis subcontract involves the development of Stable Base Master Phototools and digital artwork for prime contractors supporting DLA/NAVSUP AEGIS Weapons System projects. The selected provider will utilize CAD/CAM software and high-precision drafting tools to create technical drawings and artwork specifications that serve as the master templates for manufacturing, ensuring all deliverables strictly adhere to AEGIS technical specifications. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 541370, the project focuses on the delivery of completed master phototools. The solicitation was posted on October 28, 2026, with a response deadline set for December 4, 2026.

Surveying and Mapping (except Geophysical) Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Manufacture of Drive Motor Assembly AdapterThis subcontract, managed by the Department of Defense through DLA Mechanicsburg, involves the manufacture of the Drive Motor Assembly Adapter (NIIN 012551683) for prime contractors working on DLA/NAVSUP AEGIS Weapons System projects. The scope of work requires precision machining, milling, and turning of the adapter components utilizing CNC machinery and precision measurement tools to ensure strict adherence to technical specifications. The contractor must maintain compliance with NIST SP 800-171 standards, the Buy American-Balance of Payments Program, and MIL-STD-129 for IUID marking. Classified under NAICS code 332721, the project focuses on the delivery of finished drive motor adapter components. The solicitation was posted on October 28, 2026, with a response deadline of December 4, 2026.

Precision Turned Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and FulfillmentThe MIL-SPEC Packaging and Fulfillment subcontract involves providing specialized military packaging and shipment preparation for prime contractors supporting NAVSUP Weapon System Support projects. The scope of work focuses on the delivery of packaged and labeled Controller Kits, requiring strict adherence to MIL-STD-2073 standards. Key technical requirements include the use of moisture barriers, anti-static bagging, and military-grade crates, while ensuring all physical identification and labeling comply with rigorous military transport and storage regulations. This opportunity is issued by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency under NAICS code 488410. The solicitation was posted on October 28, 2026, with a response deadline set for November 30, 2026.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Supply of Electronic Components for Controller KitThis subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the supply of electronic components and semiconductors for controller kits used in NAVSUP Weapon System Support projects. The scope of work focuses on sourcing specific parts for CCA design and ensuring the delivery of all components with comprehensive traceability certificates. To mitigate the risk of counterfeit parts, the provider must adhere to CDAP guidelines by providing rigorous supply chain documentation, including part numbers, National Stock Numbers, and CAGE codes. This procurement falls under NAICS code 423610, with a response deadline set for November 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Forward Propeller Supply (NSN 2010011372013)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Check Valve (NSN 4820016915578)

Defense Logistics Agency

POSTED

DEADLINE

Supply of 2-Inch Automatic BOA Deck Drains

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine Window Manufacturer/Supplier

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Pilot Operated Pressure Relief Valves (MLCP Series)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SHOE SET,COUNTER CL

Solicitation # N0010426QJC25

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

20--WINDOW ASSEMBLY,HEA

Solicitation # N0010426RFG69

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

20--PRAIRIE AIR,STBD, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QUB66

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS